You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
279 lines
9.4 KiB
279 lines
9.4 KiB
//
|
|
// Created by MightyPork on 2017/12/08.
|
|
//
|
|
|
|
#ifndef GEX_PLAT_COMPAT_H
|
|
#define GEX_PLAT_COMPAT_H
|
|
|
|
#define VFS_DRIVE_NAME "GEX"
|
|
|
|
// -------- Static buffers ---------
|
|
// USB / VFS task stack size
|
|
#if DISABLE_MSC
|
|
#define TSK_STACK_MAIN 100 // without MSC the stack usage is significantly lower
|
|
#else
|
|
#define TSK_STACK_MAIN 160
|
|
#endif
|
|
|
|
// 180 is normally enough if not doing extensive debug logging
|
|
#define TSK_STACK_MSG 200 // TF message handler task stack size (all unit commands run on this thread)
|
|
|
|
#define BULK_READ_BUF_LEN 256 // Buffer for TF bulk reads
|
|
#define UNIT_TMP_LEN 512 // Buffer for internal unit operations
|
|
|
|
#define FLASH_SAVE_BUF_LEN 128 // Malloc'd buffer for saving to flash
|
|
|
|
#define MSG_QUE_SLOT_SIZE 64 // FIXME this should be possible to lower, but there's some bug with bulk transfer / INI parser
|
|
#define RX_QUE_CAPACITY 16 // TinyFrame rx queue size (64 bytes each)
|
|
|
|
#define TF_MAX_PAYLOAD_RX 512 // TF max Rx payload
|
|
#define TF_SENDBUF_LEN 64 // TF transmit buffer (can be less than a full frame)
|
|
|
|
#define TF_MAX_ID_LST 4 // Frame ID listener count
|
|
#define TF_MAX_TYPE_LST 6 // Frame Type listener count
|
|
#define TF_MAX_GEN_LST 1 // Generic listener count
|
|
|
|
#define USBD_MAX_STR_DESC_SIZ 64 // Descriptor conversion buffer (used for converting ASCII to UTF-16, must be 2x the size of the longest descriptor)
|
|
#define MSC_MEDIA_PACKET 512 // Mass storage sector size (packet)
|
|
|
|
#define INI_KEY_MAX 20 // Ini parser key buffer
|
|
#define INI_VALUE_MAX 30 // Ini parser value buffer
|
|
|
|
// -------- Stack buffers ----------
|
|
#define DBG_BUF_LEN 80 // Size of the snprintf buffer for debug messages
|
|
#define ERR_MSG_STR_LEN 64 // Error message buffer size
|
|
#define IWBUFFER_LEN 80 // Ini writer buffer for sprintf
|
|
|
|
// -------- Timeouts ------------
|
|
#define TF_PARSER_TIMEOUT_TICKS 300 // Timeout for receiving & parsing a frame
|
|
#define BULK_LST_TIMEOUT_MS 500 // timeout for the bulk transaction to expire
|
|
#define MSG_QUE_POST_TIMEOUT 100 // Time to post to the messages / jobs queue
|
|
|
|
// -------- Platform specific includes and defines ---------
|
|
|
|
/// Feature flags:
|
|
// PLAT_FLASHBANKS - has the Banks field on the Flash config struct
|
|
// PLAT_NO_FLOATING_INPUTS - can't have digital inputs with no pull resistor
|
|
// PLAT_USB_PHYCLOCK - requires special config of phy clock for USB
|
|
// PLAT_USB_OTGFS - uses the USB OTG IP, needs different config code
|
|
// PLAT_LOCK_BTN - use a lock button instead of a lock jumper (push to toggle)
|
|
// PLAT_LOCK_1CLOSED - lock jumper is active (closed / button pressed) in logical 1
|
|
// PLAT_NO_AFNUM - legacy platform without numbered AF alternatives
|
|
|
|
#if defined(GEX_PLAT_F103_BLUEPILL)
|
|
|
|
// platform name for the version string
|
|
#define GEX_PLATFORM "STM32F103-Bluepill"
|
|
#define PLAT_AHB_MHZ 72
|
|
#define PLAT_APB1_MHZ 36
|
|
|
|
// feature flags
|
|
#define PLAT_FLASHBANKS 1
|
|
#define PLAT_NO_FLOATING_INPUTS 1
|
|
#define PLAT_NO_AFNUM 1
|
|
|
|
#include <stm32f1xx.h>
|
|
#include <stm32f1xx_hal.h>
|
|
#include <stm32f1xx_ll_adc.h>
|
|
#include <stm32f1xx_ll_bus.h>
|
|
#include <stm32f1xx_ll_cortex.h>
|
|
#include <stm32f1xx_ll_crc.h>
|
|
#include <stm32f1xx_ll_dac.h>
|
|
#include <stm32f1xx_ll_dma.h>
|
|
#include <stm32f1xx_ll_exti.h>
|
|
#include <stm32f1xx_ll_fsmc.h>
|
|
#include <stm32f1xx_ll_gpio.h>
|
|
#include <stm32f1xx_ll_i2c.h>
|
|
#include <stm32f1xx_ll_iwdg.h>
|
|
#include <stm32f1xx_ll_pwr.h>
|
|
#include <stm32f1xx_ll_rcc.h>
|
|
#include <stm32f1xx_ll_rtc.h>
|
|
#include <stm32f1xx_ll_sdmmc.h>
|
|
#include <stm32f1xx_ll_spi.h>
|
|
#include <stm32f1xx_ll_system.h>
|
|
#include <stm32f1xx_ll_tim.h>
|
|
#include <stm32f1xx_ll_usart.h>
|
|
#include <stm32f1xx_ll_usb.h>
|
|
#include <stm32f1xx_ll_utils.h>
|
|
#include <stm32f1xx_ll_wwdg.h>
|
|
|
|
// size, determines position of the flash storage
|
|
#define FLASH_SIZE (64*1024)
|
|
#define SETTINGS_BLOCK_SIZE (1024*2) // this must be a multiple of FLASH pages
|
|
#define SETTINGS_FLASH_ADDR (0x08000000 + FLASH_SIZE - SETTINGS_BLOCK_SIZE)
|
|
|
|
// Number of GPIO ports A,B,C...
|
|
#define PORTS_COUNT 5
|
|
|
|
// Lock jumper config - re-use BOOT1, closed = LOW
|
|
#define LOCK_JUMPER_PORT 'B'
|
|
#define LOCK_JUMPER_PIN 2
|
|
|
|
// Status LED config
|
|
#define STATUS_LED_PORT 'C'
|
|
#define STATUS_LED_PIN 13
|
|
|
|
#elif defined(GEX_PLAT_F072_DISCOVERY)
|
|
|
|
// platform name for the version string
|
|
#define GEX_PLATFORM "STM32F072-Discovery"
|
|
#define PLAT_AHB_MHZ 48
|
|
#define PLAT_APB1_MHZ 48
|
|
|
|
#include <stm32f0xx.h>
|
|
#include <stm32f0xx_ll_adc.h>
|
|
#include <stm32f0xx_ll_bus.h>
|
|
#include <stm32f0xx_ll_comp.h>
|
|
#include <stm32f0xx_ll_cortex.h>
|
|
#include <stm32f0xx_ll_crc.h>
|
|
#include <stm32f0xx_ll_crs.h>
|
|
#include <stm32f0xx_ll_dac.h>
|
|
#include <stm32f0xx_ll_dma.h>
|
|
#include <stm32f0xx_ll_exti.h>
|
|
#include <stm32f0xx_ll_gpio.h>
|
|
#include <stm32f0xx_ll_i2c.h>
|
|
#include <stm32f0xx_ll_iwdg.h>
|
|
#include <stm32f0xx_ll_pwr.h>
|
|
#include <stm32f0xx_ll_rcc.h>
|
|
#include <stm32f0xx_ll_rtc.h>
|
|
#include <stm32f0xx_ll_spi.h>
|
|
#include <stm32f0xx_ll_system.h>
|
|
#include <stm32f0xx_ll_tim.h>
|
|
#include <stm32f0xx_ll_usart.h>
|
|
#include <stm32f0xx_ll_utils.h>
|
|
#include <stm32f0xx_ll_wwdg.h>
|
|
|
|
// size, determines position of the flash storage
|
|
#define FLASH_SIZE (128*1024)
|
|
#define SETTINGS_BLOCK_SIZE (1024*2) // this must be a multiple of FLASH pages
|
|
#define SETTINGS_FLASH_ADDR (0x08000000 + FLASH_SIZE - SETTINGS_BLOCK_SIZE)
|
|
|
|
// Number of GPIO ports A,B,C...
|
|
#define PORTS_COUNT 6
|
|
|
|
// Lock jumper config
|
|
#define LOCK_JUMPER_PORT 'A'
|
|
#define LOCK_JUMPER_PIN 0
|
|
#define PLAT_LOCK_BTN 1 // toggle button instead of a jumper
|
|
#define PLAT_LOCK_1CLOSED 1 // toggle button active in log. 1
|
|
|
|
// Status LED config
|
|
#define STATUS_LED_PORT 'C'
|
|
#define STATUS_LED_PIN 6 // RED LED "UP"
|
|
|
|
#elif defined(GEX_PLAT_F303_DISCOVERY)
|
|
|
|
// platform name for the version string
|
|
#define GEX_PLATFORM "STM32F303-Discovery"
|
|
#define PLAT_AHB_MHZ 72
|
|
#define PLAT_APB1_MHZ 36
|
|
#define PLAT_APB2_MHZ 72
|
|
|
|
#include <stm32f3xx.h>
|
|
#include <stm32f3xx_hal.h>
|
|
#include <stm32f3xx_ll_adc.h>
|
|
#include <stm32f3xx_ll_bus.h>
|
|
#include <stm32f3xx_ll_comp.h>
|
|
#include <stm32f3xx_ll_cortex.h>
|
|
#include <stm32f3xx_ll_crc.h>
|
|
#include <stm32f3xx_ll_dac.h>
|
|
#include <stm32f3xx_ll_dma.h>
|
|
#include <stm32f3xx_ll_exti.h>
|
|
#include <stm32f3xx_ll_fmc.h>
|
|
#include <stm32f3xx_ll_gpio.h>
|
|
#include <stm32f3xx_ll_hrtim.h>
|
|
#include <stm32f3xx_ll_i2c.h>
|
|
#include <stm32f3xx_ll_iwdg.h>
|
|
#include <stm32f3xx_ll_opamp.h>
|
|
#include <stm32f3xx_ll_pwr.h>
|
|
#include <stm32f3xx_ll_rcc.h>
|
|
#include <stm32f3xx_ll_rtc.h>
|
|
#include <stm32f3xx_ll_spi.h>
|
|
#include <stm32f3xx_ll_system.h>
|
|
#include <stm32f3xx_ll_tim.h>
|
|
#include <stm32f3xx_ll_usart.h>
|
|
#include <stm32f3xx_ll_utils.h>
|
|
#include <stm32f3xx_ll_wwdg.h>
|
|
|
|
// size, determines position of the flash storage
|
|
#define FLASH_SIZE (256*1024)
|
|
#define SETTINGS_BLOCK_SIZE (1024*2) // this must be a multiple of FLASH pages
|
|
#define SETTINGS_FLASH_ADDR (0x08000000 + FLASH_SIZE - SETTINGS_BLOCK_SIZE)
|
|
|
|
// Number of GPIO ports A,B,C...
|
|
#define PORTS_COUNT 6
|
|
|
|
// Lock jumper config
|
|
#define LOCK_JUMPER_PORT 'A'
|
|
#define LOCK_JUMPER_PIN 0
|
|
#define PLAT_LOCK_BTN 1 // toggle button instead of a jumper
|
|
#define PLAT_LOCK_1CLOSED 1 // toggle button active in log. 1
|
|
|
|
// Status LED config
|
|
#define STATUS_LED_PORT 'E'
|
|
#define STATUS_LED_PIN 13
|
|
|
|
#elif defined(GEX_PLAT_F407_DISCOVERY)
|
|
|
|
// platform name for the version string
|
|
#define GEX_PLATFORM "STM32F407-Discovery"
|
|
#define PLAT_AHB_MHZ 168
|
|
#define PLAT_APB1_MHZ 48
|
|
#define PLAT_APB2_MHZ 96
|
|
|
|
#define PLAT_USB_PHYCLOCK 1
|
|
#define PLAT_USB_OTGFS 1
|
|
|
|
#include <stm32f4xx.h>
|
|
#include <stm32f4xx_hal.h>
|
|
#include <stm32f4xx_ll_adc.h>
|
|
#include <stm32f4xx_ll_crc.h>
|
|
#include <stm32f4xx_ll_dac.h>
|
|
#include <stm32f4xx_ll_dma.h>
|
|
#include <stm32f4xx_ll_dma2d.h>
|
|
#include <stm32f4xx_ll_exti.h>
|
|
#include <stm32f4xx_ll_fmc.h>
|
|
#include <stm32f4xx_ll_fsmc.h>
|
|
#include <stm32f4xx_ll_gpio.h>
|
|
#include <stm32f4xx_ll_i2c.h>
|
|
#include <stm32f4xx_ll_lptim.h>
|
|
#include <stm32f4xx_ll_pwr.h>
|
|
#include <stm32f4xx_ll_rcc.h>
|
|
#include <stm32f4xx_ll_rng.h>
|
|
#include <stm32f4xx_ll_rtc.h>
|
|
#include <stm32f4xx_ll_sdmmc.h>
|
|
#include <stm32f4xx_ll_spi.h>
|
|
#include <stm32f4xx_ll_tim.h>
|
|
#include <stm32f4xx_ll_usart.h>
|
|
#include <stm32f4xx_ll_usb.h>
|
|
#include <stm32f4xx_ll_utils.h>
|
|
|
|
// size, determines position of the flash storage
|
|
|
|
// we use the first 128kB sector. Unfortunately the whole sector must be erased before writing.
|
|
#define SETTINGS_FLASH_SECTOR FLASH_SECTOR_5
|
|
#define SETTINGS_BLOCK_SIZE (1024*2)
|
|
#define SETTINGS_FLASH_ADDR (0x08000000 + (16*4+64)*1024)
|
|
|
|
// Number of GPIO ports A,B,C...
|
|
#define PORTS_COUNT 6
|
|
|
|
// Lock jumper config
|
|
#define LOCK_JUMPER_PORT 'A'
|
|
#define LOCK_JUMPER_PIN 0
|
|
#define PLAT_LOCK_BTN 1 // toggle button instead of a jumper
|
|
#define PLAT_LOCK_1CLOSED 1 // toggle button active in log. 1
|
|
|
|
// Status LED config
|
|
#define STATUS_LED_PORT 'D' // orange
|
|
#define STATUS_LED_PIN 13
|
|
|
|
#else
|
|
#error "BAD PLATFORM! Please select GEX platform using a -DGEX_PLAT_* compile flag"
|
|
#endif
|
|
|
|
#define PLAT_AHB_HZ (PLAT_AHB_MHZ*1000000)
|
|
#define PLAT_APB1_HZ (PLAT_APB1_MHZ*1000000)
|
|
#define PLAT_APB2_HZ (PLAT_APB2_MHZ*1000000)
|
|
|
|
#endif //GEX_PLAT_COMPAT_H
|
|
|