You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
679 lines
21 KiB
679 lines
21 KiB
/**
|
|
******************************************************************************
|
|
* @file : usbd_conf.c
|
|
* @version : v2.0_Cube
|
|
* @brief : This file implements the board support package for the USB device library
|
|
******************************************************************************
|
|
* This notice applies to any and all portions of this file
|
|
* that are not between comment pairs USER CODE BEGIN and
|
|
* USER CODE END. Other portions of this file, whether
|
|
* inserted by the user or by software development tools
|
|
* are owned by their respective copyright owners.
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics International N.V.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted, provided that the following conditions are met:
|
|
*
|
|
* 1. Redistribution of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of other
|
|
* contributors to this software may be used to endorse or promote products
|
|
* derived from this software without specific written permission.
|
|
* 4. This software, including modifications and/or derivative works of this
|
|
* software, must execute solely and exclusively on microcontroller or
|
|
* microprocessor devices manufactured by or for STMicroelectronics.
|
|
* 5. Redistribution and use of this software other than as permitted under
|
|
* this license is void and will automatically terminate your rights under
|
|
* this license.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
|
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
|
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
|
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
|
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include <utils/malloc_safe.h>
|
|
#include "platform.h"
|
|
#include "usbd_def.h"
|
|
#include "usbd_core.h"
|
|
#include "usbd_msc.h"
|
|
#include "usbd_cdc.h"
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
extern PCD_HandleTypeDef hpcd_USB_FS;
|
|
|
|
/* USER CODE BEGIN 0 */
|
|
/* USER CODE END 0 */
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Private functions ---------------------------------------------------------*/
|
|
/* USER CODE BEGIN 1 */
|
|
/* USER CODE END 1 */
|
|
void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
|
|
|
|
/*******************************************************************************
|
|
LL Driver Callbacks (PCD -> USB Device Library)
|
|
*******************************************************************************/
|
|
/* MSP Init */
|
|
void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
|
|
{
|
|
#if defined(USB)
|
|
if(pcdHandle->Instance==USB)
|
|
{
|
|
/* USER CODE BEGIN USB_MspInit 0 */
|
|
|
|
/* USER CODE END USB_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USB_CLK_ENABLE();
|
|
|
|
/* Peripheral interrupt init */
|
|
#if GEX_PLAT_F103_BLUEPILL
|
|
HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 5, 0);
|
|
HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn);
|
|
#elif STM32F072xB
|
|
HAL_NVIC_SetPriority(USB_IRQn, 3, 0);
|
|
HAL_NVIC_EnableIRQ(USB_IRQn);
|
|
#elif GEX_PLAT_F303_DISCOVERY
|
|
// Pins need to be configured here
|
|
|
|
/**USB GPIO Configuration
|
|
PA11 ------> USB_DM
|
|
PA12 ------> USB_DP
|
|
*/
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
LL_GPIO_SetPinMode(GPIOA, LL_GPIO_PIN_11, LL_GPIO_MODE_ALTERNATE);
|
|
LL_GPIO_SetPinMode(GPIOA, LL_GPIO_PIN_12, LL_GPIO_MODE_ALTERNATE);
|
|
LL_GPIO_SetAFPin_8_15(GPIOA, LL_GPIO_PIN_11, LL_GPIO_AF_14);
|
|
LL_GPIO_SetAFPin_8_15(GPIOA, LL_GPIO_PIN_12, LL_GPIO_AF_14);
|
|
HAL_NVIC_SetPriority(USB_LP_CAN_RX0_IRQn, 5, 0);
|
|
HAL_NVIC_EnableIRQ(USB_LP_CAN_RX0_IRQn);
|
|
#else
|
|
#error "BAD PLATFORM"
|
|
#endif
|
|
/* USER CODE BEGIN USB_MspInit 1 */
|
|
|
|
/* USER CODE END USB_MspInit 1 */
|
|
}
|
|
#elif defined(USB_OTG_FS)
|
|
// This is for F407 with USB OTG peripheral
|
|
if (pcdHandle->Instance==USB_OTG_FS) {
|
|
/**USB_OTG_FS GPIO Configuration
|
|
PA11 ------> USB_OTG_FS_DM
|
|
PA12 ------> USB_OTG_FS_DP
|
|
*/
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
|
|
LL_GPIO_SetPinMode(GPIOA, LL_GPIO_PIN_11, LL_GPIO_MODE_ALTERNATE);
|
|
LL_GPIO_SetPinMode(GPIOA, LL_GPIO_PIN_12, LL_GPIO_MODE_ALTERNATE);
|
|
LL_GPIO_SetAFPin_8_15(GPIOA, LL_GPIO_PIN_11, LL_GPIO_AF_10);
|
|
LL_GPIO_SetAFPin_8_15(GPIOA, LL_GPIO_PIN_12, LL_GPIO_AF_10);
|
|
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
|
|
|
|
/* Peripheral interrupt init */
|
|
HAL_NVIC_SetPriority(OTG_FS_IRQn, 5, 0);
|
|
HAL_NVIC_EnableIRQ(OTG_FS_IRQn);
|
|
}
|
|
#else
|
|
#error "BAD USB!"
|
|
#endif
|
|
}
|
|
|
|
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
|
|
{
|
|
#if defined(USB)
|
|
if(pcdHandle->Instance==USB)
|
|
{
|
|
/* USER CODE BEGIN USB_MspDeInit 0 */
|
|
|
|
/* USER CODE END USB_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USB_CLK_DISABLE();
|
|
|
|
/* Peripheral interrupt Deinit*/
|
|
#if GEX_PLAT_F103_BLUEPILL
|
|
HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn);
|
|
#elif STM32F072xB
|
|
HAL_NVIC_DisableIRQ(USB_IRQn);
|
|
#elif GEX_PLAT_F303_DISCOVERY
|
|
HAL_NVIC_DisableIRQ(USB_LP_CAN_RX0_IRQn);
|
|
#else
|
|
#error "BAD PLATFORM"
|
|
#endif
|
|
|
|
/* USER CODE BEGIN USB_MspDeInit 1 */
|
|
|
|
/* USER CODE END USB_MspDeInit 1 */
|
|
}
|
|
#elif defined(USB_OTG_FS)
|
|
// This is for F407 with USB OTG peripheral
|
|
if (pcdHandle->Instance==USB_OTG_FS) {
|
|
__HAL_RCC_USB_OTG_FS_CLK_DISABLE();
|
|
|
|
LL_GPIO_SetPinMode(GPIOA, LL_GPIO_PIN_11, LL_GPIO_MODE_ANALOG);
|
|
LL_GPIO_SetPinMode(GPIOA, LL_GPIO_PIN_12, LL_GPIO_MODE_ANALOG);
|
|
|
|
/* Peripheral interrupt init */
|
|
HAL_NVIC_DisableIRQ(OTG_FS_IRQn);
|
|
}
|
|
#else
|
|
#error "BAD USB!"
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* @brief Setup Stage callback
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
|
|
}
|
|
|
|
/**
|
|
* @brief Data Out Stage callback.
|
|
* @param hpcd: PCD handle
|
|
* @param epnum: Endpoint Number
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
|
{
|
|
USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
|
|
}
|
|
|
|
/**
|
|
* @brief Data In Stage callback..
|
|
* @param hpcd: PCD handle
|
|
* @param epnum: Endpoint Number
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
|
{
|
|
USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
|
|
}
|
|
|
|
/**
|
|
* @brief SOF callback.
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
|
|
}
|
|
|
|
/**
|
|
* @brief Reset callback.
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
// USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
|
|
|
|
/*Set USB Current Speed*/
|
|
// switch (hpcd->Init.speed)
|
|
// {
|
|
// case PCD_SPEED_FULL:
|
|
// speed = USBD_SPEED_FULL;
|
|
// break;
|
|
//
|
|
// default:
|
|
// speed = USBD_SPEED_FULL;
|
|
// break;
|
|
// }
|
|
USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, USBD_SPEED_FULL);
|
|
|
|
/*Reset Device*/
|
|
USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
|
|
}
|
|
|
|
/**
|
|
* @brief Suspend callback.
|
|
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
/* Inform USB library that core enters in suspend Mode */
|
|
USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData);
|
|
|
|
#if PLAT_USB_PHYCLOCK
|
|
__HAL_PCD_GATE_PHYCLOCK(hpcd);
|
|
#endif
|
|
|
|
/*Enter in STOP mode */
|
|
/* USER CODE BEGIN 2 */
|
|
if (hpcd->Init.low_power_enable)
|
|
{
|
|
/* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register */
|
|
SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
|
|
}
|
|
/* USER CODE END 2 */
|
|
}
|
|
|
|
/**
|
|
* @brief Resume callback.
|
|
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
/* USER CODE BEGIN 3 */
|
|
/* USER CODE END 3 */
|
|
USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData);
|
|
}
|
|
|
|
/**
|
|
* @brief ISOOUTIncomplete callback.
|
|
* @param hpcd: PCD handle
|
|
* @param epnum: Endpoint Number
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
|
{
|
|
USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
|
|
}
|
|
|
|
/**
|
|
* @brief ISOINIncomplete callback.
|
|
* @param hpcd: PCD handle
|
|
* @param epnum: Endpoint Number
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
|
{
|
|
USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
|
|
}
|
|
|
|
/**
|
|
* @brief ConnectCallback callback.
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
|
|
}
|
|
|
|
/**
|
|
* @brief Disconnect callback.
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
|
|
}
|
|
|
|
/*******************************************************************************
|
|
LL Driver Interface (USB Device Library --> PCD)
|
|
*******************************************************************************/
|
|
/**
|
|
* @brief Initializes the Low Level portion of the Device driver.
|
|
* @param pdev: Device handle
|
|
* @retval USBD Status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev)
|
|
{
|
|
#if PLAT_USB_OTGFS
|
|
/* Init USB_IP */
|
|
if (pdev->id == DEVICE_FS) {
|
|
/* Link The driver to the stack */
|
|
hpcd_USB_FS.pData = pdev;
|
|
pdev->pData = &hpcd_USB_FS;
|
|
|
|
hpcd_USB_FS.Instance = USB_OTG_FS;
|
|
hpcd_USB_FS.Init.dev_endpoints = 4;
|
|
hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
|
|
hpcd_USB_FS.Init.dma_enable = DISABLE;
|
|
hpcd_USB_FS.Init.ep0_mps = DEP0CTL_MPS_8;
|
|
hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
|
|
hpcd_USB_FS.Init.Sof_enable = DISABLE;
|
|
hpcd_USB_FS.Init.low_power_enable = DISABLE;
|
|
hpcd_USB_FS.Init.lpm_enable = DISABLE;
|
|
hpcd_USB_FS.Init.vbus_sensing_enable = DISABLE;
|
|
hpcd_USB_FS.Init.use_dedicated_ep1 = DISABLE;
|
|
if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
|
|
{
|
|
_Error_Handler(__FILE__, __LINE__);
|
|
}
|
|
|
|
// FIXME this is likely wrong
|
|
HAL_PCDEx_SetRxFiFo(&hpcd_USB_FS, 0x80);
|
|
|
|
HAL_PCDEx_SetTxFiFo(&hpcd_USB_FS, 0, 0x40); // EP0
|
|
HAL_PCDEx_SetTxFiFo(&hpcd_USB_FS, MSC_EPOUT_ADDR, 0x40);
|
|
HAL_PCDEx_SetTxFiFo(&hpcd_USB_FS, CDC_OUT_EP, 0x40);
|
|
// EP 3 is Rx only
|
|
}
|
|
#else
|
|
/* Init USB_IP */
|
|
/* Link The driver to the stack */
|
|
hpcd_USB_FS.pData = pdev;
|
|
pdev->pData = &hpcd_USB_FS;
|
|
|
|
hpcd_USB_FS.Instance = USB;
|
|
hpcd_USB_FS.Init.dev_endpoints = 8;
|
|
hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
|
|
hpcd_USB_FS.Init.ep0_mps = DEP0CTL_MPS_8; // could be DEP0CTL_MPS_64
|
|
hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
|
|
hpcd_USB_FS.Init.low_power_enable = DISABLE;
|
|
hpcd_USB_FS.Init.lpm_enable = DISABLE;
|
|
hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
|
|
if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
|
|
{
|
|
_Error_Handler(__FILE__, __LINE__);
|
|
}
|
|
|
|
uint32_t ptr = 0;
|
|
const int TOTAL_EPS = (USBD_NUM_ENDPOINTS*2+1);
|
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, ptr = TOTAL_EPS*8); // 64
|
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, ptr += 64); // 64
|
|
|
|
// MSC endpoints - EP1, two-way
|
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , MSC_EPIN_ADDR , PCD_SNG_BUF, ptr += 64); // 64
|
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , MSC_EPOUT_ADDR , PCD_SNG_BUF, ptr += 64); // 64
|
|
|
|
// CDC endpoints, EP2 two-way and EP3 in-only
|
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , CDC_IN_EP , PCD_SNG_BUF, ptr += 64); // 64
|
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , CDC_OUT_EP , PCD_SNG_BUF, ptr += 64); // 64
|
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , CDC_CMD_EP , PCD_SNG_BUF, ptr += 16); // 16
|
|
(void)ptr;
|
|
#endif
|
|
|
|
return USBD_OK;
|
|
}
|
|
|
|
#define HAL_TO_USB_STATUS(hal) ((hal)==HAL_OK?USBD_OK:(hal)==HAL_BUSY?USBD_BUSY:USBD_FAIL)
|
|
|
|
/**
|
|
* @brief De-Initializes the Low Level portion of the Device driver.
|
|
* @param pdev: Device handle
|
|
* @retval USBD Status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_PCD_DeInit(pdev->pData);
|
|
return HAL_TO_USB_STATUS(hal_status);
|
|
}
|
|
|
|
/**
|
|
* @brief Starts the Low Level portion of the Device driver.
|
|
* @param pdev: Device handle
|
|
* @retval USBD Status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_PCD_Start(pdev->pData);
|
|
return HAL_TO_USB_STATUS(hal_status);
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the Low Level portion of the Device driver.
|
|
* @param pdev: Device handle
|
|
* @retval USBD Status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_PCD_Stop(pdev->pData);
|
|
return HAL_TO_USB_STATUS(hal_status);
|
|
}
|
|
|
|
/**
|
|
* @brief Opens an endpoint of the Low Level Driver.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint Number
|
|
* @param ep_type: Endpoint Type
|
|
* @param ep_mps: Endpoint Max Packet Size
|
|
* @retval USBD Status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
|
|
uint8_t ep_addr,
|
|
uint8_t ep_type,
|
|
uint16_t ep_mps)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_PCD_EP_Open(pdev->pData,
|
|
ep_addr,
|
|
ep_mps,
|
|
ep_type);
|
|
|
|
return HAL_TO_USB_STATUS(hal_status);
|
|
}
|
|
|
|
/**
|
|
* @brief Closes an endpoint of the Low Level Driver.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint Number
|
|
* @retval USBD Status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
|
{
|
|
//trap("CloseEP noimpl"); // XXX This uses ~ 500 bytes, maybe could be disabled
|
|
HAL_StatusTypeDef hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr);
|
|
return HAL_TO_USB_STATUS(hal_status);
|
|
}
|
|
|
|
/**
|
|
* @brief Flushes an endpoint of the Low Level Driver.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint Number
|
|
* @retval USBD Status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr);
|
|
return HAL_TO_USB_STATUS(hal_status);
|
|
}
|
|
|
|
/**
|
|
* @brief Sets a Stall condition on an endpoint of the Low Level Driver.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint Number
|
|
* @retval USBD Status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr);
|
|
return HAL_TO_USB_STATUS(hal_status);
|
|
}
|
|
|
|
/**
|
|
* @brief Clears a Stall condition on an endpoint of the Low Level Driver.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint Number
|
|
* @retval USBD Status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr);
|
|
return HAL_TO_USB_STATUS(hal_status);
|
|
}
|
|
|
|
/**
|
|
* @brief Returns Stall condition.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint Number
|
|
* @retval Stall (1: Yes, 0: No)
|
|
*/
|
|
uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
|
{
|
|
PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData;
|
|
|
|
if((ep_addr & 0x80) == 0x80)
|
|
{
|
|
return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
|
|
}
|
|
else
|
|
{
|
|
return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
|
|
}
|
|
}
|
|
/**
|
|
* @brief Assigns a USB address to the device.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint Number
|
|
* @retval USBD Status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr);
|
|
return HAL_TO_USB_STATUS(hal_status);
|
|
}
|
|
|
|
/**
|
|
* @brief Transmits data over an endpoint.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint Number
|
|
* @param pbuf: Pointer to data to be sent
|
|
* @param size: Data size
|
|
* @retval USBD Status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
|
|
uint8_t ep_addr,
|
|
uint8_t *pbuf,
|
|
uint16_t size)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size);
|
|
return HAL_TO_USB_STATUS(hal_status);
|
|
}
|
|
|
|
/**
|
|
* @brief Prepares an endpoint for reception.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint Number
|
|
* @param pbuf: Pointer to data to be received
|
|
* @param size: Data size
|
|
* @retval USBD Status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
|
|
uint8_t ep_addr,
|
|
uint8_t *pbuf,
|
|
uint16_t size)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size);
|
|
return HAL_TO_USB_STATUS(hal_status);
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the last transfered packet size.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint Number
|
|
* @retval Recived Data Size
|
|
*/
|
|
uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
|
{
|
|
return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr);
|
|
}
|
|
|
|
#if (USBD_LPM_ENABLED == 1)
|
|
/**
|
|
* @brief HAL_PCDEx_LPM_Callback : Send LPM message to user layer
|
|
* @param hpcd: PCD handle
|
|
* @param msg: LPM message
|
|
* @retval HAL status
|
|
*/
|
|
void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
|
|
{
|
|
switch ( msg)
|
|
{
|
|
case PCD_LPM_L0_ACTIVE:
|
|
if (hpcd->Init.low_power_enable)
|
|
{
|
|
SystemClock_Config();
|
|
|
|
/* Reset SLEEPDEEP bit of Cortex System Control Register */
|
|
SCB->SCR &= (uint32_t)~((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
|
|
}
|
|
__HAL_PCD_UNGATE_PHYCLOCK(hpcd);
|
|
USBD_LL_Resume(hpcd->pData);
|
|
break;
|
|
|
|
case PCD_LPM_L1_ACTIVE:
|
|
__HAL_PCD_GATE_PHYCLOCK(hpcd);
|
|
USBD_LL_Suspend(hpcd->pData);
|
|
|
|
/*Enter in STOP mode */
|
|
if (hpcd->Init.low_power_enable)
|
|
{
|
|
/* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register */
|
|
SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
/**
|
|
* @brief Delays routine for the USB Device Library.
|
|
* @param Delay: Delay in ms
|
|
* @retval None
|
|
*/
|
|
//void USBD_LL_Delay (uint32_t Delay)
|
|
//{
|
|
// HAL_Delay(Delay);
|
|
//}
|
|
|
|
/**
|
|
* @brief static single allocation.
|
|
* @param size: size of allocated memory
|
|
* @retval None
|
|
*/
|
|
void *USBD_static_malloc(uint32_t size)
|
|
{
|
|
return malloc_ck(size);
|
|
}
|
|
|
|
/**
|
|
* @brief Dummy memory free
|
|
* @param *p pointer to allocated memory address
|
|
* @retval None
|
|
*/
|
|
void USBD_static_free(void *p)
|
|
{
|
|
free_ck(p);
|
|
}
|
|
|
|
/**
|
|
* @brief Software Device Connection
|
|
* @param hpcd: PCD handle
|
|
* @param state: connection state (0 : disconnected / 1: connected)
|
|
* @retval None
|
|
*/
|
|
void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
|
|
{
|
|
///* USER CODE BEGIN 5 */
|
|
// if (state == 1)
|
|
// {
|
|
// /* Configure Low Connection State */
|
|
//
|
|
// }
|
|
// else
|
|
// {
|
|
// /* Configure High Connection State */
|
|
//
|
|
// }
|
|
///* USER CODE END 5 */
|
|
}
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|