/**
******************************************************************************
* @file usbd_msc.c
* @author MCD Application Team
* @version V2.4.2
* @date 11-December-2015
* @brief This file provides all the MSC core functions.
*
* @verbatim
*
* ===================================================================
* MSC Class Description
* ===================================================================
* This module manages the MSC class V1.0 following the "Universal
* Serial Bus Mass Storage Class (MSC) Bulk-Only Transport (BOT) Version 1.0
* Sep. 31, 1999".
* This driver implements the following aspects of the specification:
* - Bulk-Only Transport protocol
* - Subclass : SCSI transparent command set (ref. SCSI Primary Commands - 3 (SPC-3))
*
* @endverbatim
*
******************************************************************************
* @attention
*
*
© COPYRIGHT 2015 STMicroelectronics
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_msc.h"
/** @addtogroup STM32_USB_DEVICE_LIBRARY
* @{
*/
/** @defgroup MSC_CORE
* @brief Mass storage core module
* @{
*/
/** @defgroup MSC_CORE_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup MSC_CORE_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup MSC_CORE_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup MSC_CORE_Private_FunctionPrototypes
* @{
*/
uint8_t USBD_MSC_Init (USBD_HandleTypeDef *pdev,
uint8_t cfgidx);
uint8_t USBD_MSC_DeInit (USBD_HandleTypeDef *pdev,
uint8_t cfgidx);
uint8_t USBD_MSC_Setup (USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req);
uint8_t USBD_MSC_DataIn (USBD_HandleTypeDef *pdev,
uint8_t epnum);
uint8_t USBD_MSC_DataOut (USBD_HandleTypeDef *pdev,
uint8_t epnum);
uint8_t *USBD_MSC_GetHSCfgDesc (uint16_t *length);
uint8_t *USBD_MSC_GetFSCfgDesc (uint16_t *length);
uint8_t *USBD_MSC_GetOtherSpeedCfgDesc (uint16_t *length);
uint8_t *USBD_MSC_GetDeviceQualifierDescriptor (uint16_t *length);
/**
* @}
*/
/** @defgroup MSC_CORE_Private_Variables
* @{
*/
#ifndef MSC_COMPOSITE
USBD_ClassTypeDef USBD_MSC =
{
USBD_MSC_Init,
USBD_MSC_DeInit,
USBD_MSC_Setup,
NULL, /*EP0_TxSent*/
NULL, /*EP0_RxReady*/
USBD_MSC_DataIn,
USBD_MSC_DataOut,
NULL, /*SOF */
NULL,
NULL,
USBD_MSC_GetHSCfgDesc,
USBD_MSC_GetFSCfgDesc,
USBD_MSC_GetOtherSpeedCfgDesc,
USBD_MSC_GetDeviceQualifierDescriptor,
};
/* USB Mass storage device Configuration Descriptor */
/* All Descriptors (Configuration, Interface, Endpoint, Class, Vendor */
__ALIGN_BEGIN uint8_t USBD_MSC_CfgHSDesc[USB_MSC_CONFIG_DESC_SIZ] __ALIGN_END =
{
0x09, /* bLength: Configuation Descriptor size */
USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
USB_MSC_CONFIG_DESC_SIZ,
0x00,
0x01, /* bNumInterfaces: 1 interface */
0x01, /* bConfigurationValue: */
0x04, /* iConfiguration: */
0xC0, /* bmAttributes: */
0x32, /* MaxPower 100 mA */
/******************** Mass Storage interface ********************/
0x09, /* bLength: Interface Descriptor size */
0x04, /* bDescriptorType: */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints*/
0x08, /* bInterfaceClass: MSC Class */
0x06, /* bInterfaceSubClass : SCSI transparent*/
0x50, /* nInterfaceProtocol */
0x05, /* iInterface: */
/******************** Mass Storage Endpoints ********************/
0x07, /*Endpoint descriptor length = 7*/
0x05, /*Endpoint descriptor type */
MSC_EPIN_ADDR, /*Endpoint address (IN, address 1) */
0x02, /*Bulk endpoint type */
LOBYTE(MSC_MAX_HS_PACKET),
HIBYTE(MSC_MAX_HS_PACKET),
0x00, /*Polling interval in milliseconds */
0x07, /*Endpoint descriptor length = 7 */
0x05, /*Endpoint descriptor type */
MSC_EPOUT_ADDR, /*Endpoint address (OUT, address 1) */
0x02, /*Bulk endpoint type */
LOBYTE(MSC_MAX_HS_PACKET),
HIBYTE(MSC_MAX_HS_PACKET),
0x00 /*Polling interval in milliseconds*/
};
/* USB Mass storage device Configuration Descriptor */
/* All Descriptors (Configuration, Interface, Endpoint, Class, Vendor */
uint8_t USBD_MSC_CfgFSDesc[USB_MSC_CONFIG_DESC_SIZ] __ALIGN_END =
{
0x09, /* bLength: Configuation Descriptor size */
USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
USB_MSC_CONFIG_DESC_SIZ,
0x00,
0x01, /* bNumInterfaces: 1 interface */
0x01, /* bConfigurationValue: */
0x04, /* iConfiguration: */
0xC0, /* bmAttributes: */
0x32, /* MaxPower 100 mA */
/******************** Mass Storage interface ********************/
0x09, /* bLength: Interface Descriptor size */
0x04, /* bDescriptorType: */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints*/
0x08, /* bInterfaceClass: MSC Class */
0x06, /* bInterfaceSubClass : SCSI transparent*/
0x50, /* nInterfaceProtocol */
0x05, /* iInterface: */
/******************** Mass Storage Endpoints ********************/
0x07, /*Endpoint descriptor length = 7*/
0x05, /*Endpoint descriptor type */
MSC_EPIN_ADDR, /*Endpoint address (IN, address 1) */
0x02, /*Bulk endpoint type */
LOBYTE(MSC_MAX_FS_PACKET),
HIBYTE(MSC_MAX_FS_PACKET),
0x00, /*Polling interval in milliseconds */
0x07, /*Endpoint descriptor length = 7 */
0x05, /*Endpoint descriptor type */
MSC_EPOUT_ADDR, /*Endpoint address (OUT, address 1) */
0x02, /*Bulk endpoint type */
LOBYTE(MSC_MAX_FS_PACKET),
HIBYTE(MSC_MAX_FS_PACKET),
0x00 /*Polling interval in milliseconds*/
};
__ALIGN_BEGIN uint8_t USBD_MSC_OtherSpeedCfgDesc[USB_MSC_CONFIG_DESC_SIZ] __ALIGN_END =
{
0x09, /* bLength: Configuation Descriptor size */
USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION,
USB_MSC_CONFIG_DESC_SIZ,
0x00,
0x01, /* bNumInterfaces: 1 interface */
0x01, /* bConfigurationValue: */
0x04, /* iConfiguration: */
0xC0, /* bmAttributes: */
0x32, /* MaxPower 100 mA */
/******************** Mass Storage interface ********************/
0x09, /* bLength: Interface Descriptor size */
0x04, /* bDescriptorType: */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints*/
0x08, /* bInterfaceClass: MSC Class */
0x06, /* bInterfaceSubClass : SCSI transparent command set*/
0x50, /* nInterfaceProtocol */
0x05, /* iInterface: */
/******************** Mass Storage Endpoints ********************/
0x07, /*Endpoint descriptor length = 7*/
0x05, /*Endpoint descriptor type */
MSC_EPIN_ADDR, /*Endpoint address (IN, address 1) */
0x02, /*Bulk endpoint type */
0x40,
0x00,
0x00, /*Polling interval in milliseconds */
0x07, /*Endpoint descriptor length = 7 */
0x05, /*Endpoint descriptor type */
MSC_EPOUT_ADDR, /*Endpoint address (OUT, address 1) */
0x02, /*Bulk endpoint type */
0x40,
0x00,
0x00 /*Polling interval in milliseconds*/
};
/* USB Standard Device Descriptor */
__ALIGN_BEGIN uint8_t USBD_MSC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
{
USB_LEN_DEV_QUALIFIER_DESC,
USB_DESC_TYPE_DEVICE_QUALIFIER,
0x00,
0x02,
0x00,
0x00,
0x00,
MSC_MAX_FS_PACKET,
0x01,
0x00,
};
#endif
/**
* @}
*/
/** @defgroup MSC_CORE_Private_Functions
* @{
*/
/**
* @brief USBD_MSC_Init
* Initialize the mass storage configuration
* @param pdev: device instance
* @param cfgidx: configuration index
* @retval status
*/
uint8_t USBD_MSC_Init (USBD_HandleTypeDef *pdev,
uint8_t cfgidx)
{
int16_t ret = 0;
if(pdev->dev_speed == USBD_SPEED_HIGH )
{
/* Open EP OUT */
USBD_LL_OpenEP(pdev,
MSC_EPOUT_ADDR,
USBD_EP_TYPE_BULK,
MSC_MAX_HS_PACKET);
/* Open EP IN */
USBD_LL_OpenEP(pdev,
MSC_EPIN_ADDR,
USBD_EP_TYPE_BULK,
MSC_MAX_HS_PACKET);
}
else
{
/* Open EP OUT */
USBD_LL_OpenEP(pdev,
MSC_EPOUT_ADDR,
USBD_EP_TYPE_BULK,
MSC_MAX_FS_PACKET);
/* Open EP IN */
USBD_LL_OpenEP(pdev,
MSC_EPIN_ADDR,
USBD_EP_TYPE_BULK,
MSC_MAX_FS_PACKET);
}
pdev->pClassData = USBD_malloc(sizeof (USBD_MSC_BOT_HandleTypeDef));
if(pdev->pClassData == NULL)
{
ret = 1;
}
else
{
/* Init the BOT layer */
MSC_BOT_Init(pdev);
ret = 0;
}
return ret;
}
/**
* @brief USBD_MSC_DeInit
* DeInitilaize the mass storage configuration
* @param pdev: device instance
* @param cfgidx: configuration index
* @retval status
*/
uint8_t USBD_MSC_DeInit (USBD_HandleTypeDef *pdev,
uint8_t cfgidx)
{
/* Close MSC EPs */
USBD_LL_CloseEP(pdev,
MSC_EPOUT_ADDR);
/* Open EP IN */
USBD_LL_CloseEP(pdev,
MSC_EPIN_ADDR);
/* De-Init the BOT layer */
MSC_BOT_DeInit(pdev);
/* Free MSC Class Resources */
if(pdev->pClassData != NULL)
{
USBD_free(pdev->pClassData);
pdev->pClassData = NULL;
}
return 0;
}
/**
* @brief USBD_MSC_Setup
* Handle the MSC specific requests
* @param pdev: device instance
* @param req: USB request
* @retval status
*/
uint8_t USBD_MSC_Setup (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req)
{
USBD_MSC_BOT_HandleTypeDef *hmsc = (USBD_MSC_BOT_HandleTypeDef*) pdev->pClassData;
switch (req->bmRequest & USB_REQ_TYPE_MASK)
{
/* Class request */
case USB_REQ_TYPE_CLASS :
switch (req->bRequest)
{
case BOT_GET_MAX_LUN :
if((req->wValue == 0) &&
(req->wLength == 1) &&
((req->bmRequest & 0x80) == 0x80))
{
hmsc->max_lun = ((USBD_StorageTypeDef *)pdev->pUserData)->GetMaxLun();
USBD_CtlSendData (pdev,
(uint8_t *)&hmsc->max_lun,
1);
}
else
{
USBD_CtlError(pdev , req);
return USBD_FAIL;
}
break;
case BOT_RESET :
if((req->wValue == 0) &&
(req->wLength == 0) &&
((req->bmRequest & 0x80) != 0x80))
{
MSC_BOT_Reset(pdev);
}
else
{
USBD_CtlError(pdev , req);
return USBD_FAIL;
}
break;
default:
USBD_CtlError(pdev , req);
return USBD_FAIL;
}
break;
/* Interface & Endpoint request */
case USB_REQ_TYPE_STANDARD:
switch (req->bRequest)
{
case USB_REQ_GET_INTERFACE :
USBD_CtlSendData (pdev,
(uint8_t *)&hmsc->interface,
1);
break;
case USB_REQ_SET_INTERFACE :
hmsc->interface = (uint8_t)(req->wValue);
break;
case USB_REQ_CLEAR_FEATURE:
/* Flush the FIFO and Clear the stall status */
USBD_LL_FlushEP(pdev, (uint8_t)req->wIndex);
/* Reactivate the EP */
USBD_LL_CloseEP (pdev , (uint8_t)req->wIndex);
if((((uint8_t)req->wIndex) & 0x80) == 0x80)
{
if(pdev->dev_speed == USBD_SPEED_HIGH )
{
/* Open EP IN */
USBD_LL_OpenEP(pdev,
MSC_EPIN_ADDR,
USBD_EP_TYPE_BULK,
MSC_MAX_HS_PACKET);
}
else
{
/* Open EP IN */
USBD_LL_OpenEP(pdev,
MSC_EPIN_ADDR,
USBD_EP_TYPE_BULK,
MSC_MAX_FS_PACKET);
}
}
else
{
if(pdev->dev_speed == USBD_SPEED_HIGH )
{
/* Open EP IN */
USBD_LL_OpenEP(pdev,
MSC_EPOUT_ADDR,
USBD_EP_TYPE_BULK,
MSC_MAX_HS_PACKET);
}
else
{
/* Open EP IN */
USBD_LL_OpenEP(pdev,
MSC_EPOUT_ADDR,
USBD_EP_TYPE_BULK,
MSC_MAX_FS_PACKET);
}
}
/* Handle BOT error */
MSC_BOT_CplClrFeature(pdev, (uint8_t)req->wIndex);
break;
}
break;
default:
break;
}
return 0;
}
/**
* @brief USBD_MSC_DataIn
* handle data IN Stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval status
*/
uint8_t USBD_MSC_DataIn (USBD_HandleTypeDef *pdev,
uint8_t epnum)
{
MSC_BOT_DataIn(pdev , epnum);
return 0;
}
/**
* @brief USBD_MSC_DataOut
* handle data OUT Stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval status
*/
uint8_t USBD_MSC_DataOut (USBD_HandleTypeDef *pdev,
uint8_t epnum)
{
MSC_BOT_DataOut(pdev , epnum);
return 0;
}
#ifndef MSC_COMPOSITE
/**
* @brief USBD_MSC_GetHSCfgDesc
* return configuration descriptor
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
uint8_t *USBD_MSC_GetHSCfgDesc (uint16_t *length)
{
*length = sizeof (USBD_MSC_CfgHSDesc);
return USBD_MSC_CfgHSDesc;
}
/**
* @brief USBD_MSC_GetFSCfgDesc
* return configuration descriptor
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
uint8_t *USBD_MSC_GetFSCfgDesc (uint16_t *length)
{
*length = sizeof (USBD_MSC_CfgFSDesc);
return USBD_MSC_CfgFSDesc;
}
/**
* @brief USBD_MSC_GetOtherSpeedCfgDesc
* return other speed configuration descriptor
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
uint8_t *USBD_MSC_GetOtherSpeedCfgDesc (uint16_t *length)
{
*length = sizeof (USBD_MSC_OtherSpeedCfgDesc);
return USBD_MSC_OtherSpeedCfgDesc;
}
/**
* @brief DeviceQualifierDescriptor
* return Device Qualifier descriptor
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
uint8_t *USBD_MSC_GetDeviceQualifierDescriptor (uint16_t *length)
{
*length = sizeof (USBD_MSC_DeviceQualifierDesc);
return USBD_MSC_DeviceQualifierDesc;
}
#endif
/**
* @brief USBD_MSC_RegisterStorage
* @param fops: storage callback
* @retval status
*/
uint8_t USBD_MSC_RegisterStorage (USBD_HandleTypeDef *pdev,
USBD_StorageTypeDef *fops)
{
if(fops != NULL)
{
pdev->pUserData= fops;
}
return 0;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/