//
// Created by MightyPork on 2017/12/08.
//

#ifndef GEX_PLAT_COMPAT_H
#define GEX_PLAT_COMPAT_H

#if defined(GEX_PLAT_F103_BLUEPILL)

    // platform name for the version string
    #define GEX_PLATFORM "STM32F103-Bluepill"
    #define PLAT_AHB_MHZ 72
    #define PLAT_APB1_MHZ 36

    // feature flags
    #define PLAT_FLASHBANKS 1
    #define PLAT_NO_FLOATING_INPUTS 1
    #define PLAT_NO_AFNUM 1

    #include <stm32f1xx.h>
    #include <stm32f1xx_hal.h>
    #include <stm32f1xx_ll_adc.h>
    #include <stm32f1xx_ll_bus.h>
    #include <stm32f1xx_ll_cortex.h>
    #include <stm32f1xx_ll_crc.h>
    #include <stm32f1xx_ll_dac.h>
    #include <stm32f1xx_ll_dma.h>
    #include <stm32f1xx_ll_exti.h>
    #include <stm32f1xx_ll_fsmc.h>
    #include <stm32f1xx_ll_gpio.h>
    #include <stm32f1xx_ll_i2c.h>
    #include <stm32f1xx_ll_iwdg.h>
    #include <stm32f1xx_ll_pwr.h>
    #include <stm32f1xx_ll_rcc.h>
    #include <stm32f1xx_ll_rtc.h>
    #include <stm32f1xx_ll_sdmmc.h>
    #include <stm32f1xx_ll_spi.h>
    #include <stm32f1xx_ll_system.h>
    #include <stm32f1xx_ll_tim.h>
    #include <stm32f1xx_ll_usart.h>
    #include <stm32f1xx_ll_usb.h>
    #include <stm32f1xx_ll_utils.h>
    #include <stm32f1xx_ll_wwdg.h>

    // size, determines position of the flash storage
    #define FLASH_SIZE (64*1024)
    #define SETTINGS_BLOCK_SIZE (1024*2) // this must be a multiple of FLASH pages
    #define SETTINGS_FLASH_ADDR (0x08000000 + FLASH_SIZE - SETTINGS_BLOCK_SIZE)

    // Number of GPIO ports A,B,C...
    #define PORTS_COUNT 5

    // Lock jumper config - re-use BOOT1, closed = LOW
    #define LOCK_JUMPER_PORT 'B'
    #define LOCK_JUMPER_PIN  2

    // Status LED config
    #define STATUS_LED_PORT 'C'
    #define STATUS_LED_PIN  13

#elif defined(STM32F072xB)

    #define PLAT_AHB_MHZ 48
    #define PLAT_APB1_MHZ 48

    #include <stm32f0xx.h>
    #include <stm32f0xx_ll_adc.h>
    #include <stm32f0xx_ll_bus.h>
    #include <stm32f0xx_ll_comp.h>
    #include <stm32f0xx_ll_cortex.h>
    #include <stm32f0xx_ll_crc.h>
    #include <stm32f0xx_ll_crs.h>
    #include <stm32f0xx_ll_dac.h>
    #include <stm32f0xx_ll_dma.h>
    #include <stm32f0xx_ll_exti.h>
    #include <stm32f0xx_ll_gpio.h>
    #include <stm32f0xx_ll_i2c.h>
    #include <stm32f0xx_ll_iwdg.h>
    #include <stm32f0xx_ll_pwr.h>
    #include <stm32f0xx_ll_rcc.h>
    #include <stm32f0xx_ll_rtc.h>
    #include <stm32f0xx_ll_spi.h>
    #include <stm32f0xx_ll_system.h>
    #include <stm32f0xx_ll_tim.h>
    #include <stm32f0xx_ll_usart.h>
    #include <stm32f0xx_ll_utils.h>
    #include <stm32f0xx_ll_wwdg.h>

    // size, determines position of the flash storage
    #define FLASH_SIZE (128*1024)
    #define SETTINGS_BLOCK_SIZE (1024*2) // this must be a multiple of FLASH pages
    #define SETTINGS_FLASH_ADDR (0x08000000 + FLASH_SIZE - SETTINGS_BLOCK_SIZE)

    // Number of GPIO ports A,B,C...
    #define PORTS_COUNT 6

    #if defined(GEX_PLAT_F072_DISCOVERY)
        // platform name for the version string
        #define GEX_PLATFORM "STM32F072-Discovery"

        // Lock jumper config
        #define LOCK_JUMPER_PORT 'A'
        #define LOCK_JUMPER_PIN  0
        #define PLAT_LOCK_BTN 1 // toggle button instead of a jumper
        #define PLAT_LOCK_1CLOSED 1 // toggle button active in log. 1

        // Status LED config
        #define STATUS_LED_PORT 'C'
        #define STATUS_LED_PIN  6 // RED LED "UP"
    #elif defined(GEX_PLAT_F072_HUB)
        // platform name for the version string
        #define GEX_PLATFORM "STM32F072-HUB"

        #define PLAT_FULL_XTAL 1

        // Lock jumper config
        #define LOCK_JUMPER_PORT 'D'
        #define LOCK_JUMPER_PIN  2
        #define PLAT_LOCK_BTN 1 // toggle button instead of a jumper
        #define PLAT_LOCK_1CLOSED 0 // toggle button active in log. 1

        // Status LED config
        #define STATUS_LED_PORT 'A'
        #define STATUS_LED_PIN  15 // RED LED "UP"
    #elif defined(GEX_PLAT_F072_ZERO)
        // platform name for the version string
        #define GEX_PLATFORM "STM32F072-ZERO"

        #define PLAT_FULL_XTAL 1

        // Lock jumper config
        #define LOCK_JUMPER_PORT 'D'
        #define LOCK_JUMPER_PIN  2
        #define PLAT_LOCK_BTN 1 // toggle button instead of a jumper
        #define PLAT_LOCK_1CLOSED 1 // toggle button active in log. 1

        // Status LED config
        #define STATUS_LED_PORT 'A'
        #define STATUS_LED_PIN  15 // RED LED "UP"

        #define SUPPORT_NRF 1
    #else
        #error Bad platform
    #endif

#elif defined(GEX_PLAT_F303_DISCOVERY)

    // platform name for the version string
    #define GEX_PLATFORM "STM32F303-Discovery"
    #define PLAT_AHB_MHZ 72
    #define PLAT_APB1_MHZ 36
    #define PLAT_APB2_MHZ 72

    #include <stm32f3xx.h>
    #include <stm32f3xx_hal.h>
    #include <stm32f3xx_ll_adc.h>
    #include <stm32f3xx_ll_bus.h>
    #include <stm32f3xx_ll_comp.h>
    #include <stm32f3xx_ll_cortex.h>
    #include <stm32f3xx_ll_crc.h>
    #include <stm32f3xx_ll_dac.h>
    #include <stm32f3xx_ll_dma.h>
    #include <stm32f3xx_ll_exti.h>
    #include <stm32f3xx_ll_fmc.h>
    #include <stm32f3xx_ll_gpio.h>
    #include <stm32f3xx_ll_hrtim.h>
    #include <stm32f3xx_ll_i2c.h>
    #include <stm32f3xx_ll_iwdg.h>
    #include <stm32f3xx_ll_opamp.h>
    #include <stm32f3xx_ll_pwr.h>
    #include <stm32f3xx_ll_rcc.h>
    #include <stm32f3xx_ll_rtc.h>
    #include <stm32f3xx_ll_spi.h>
    #include <stm32f3xx_ll_system.h>
    #include <stm32f3xx_ll_tim.h>
    #include <stm32f3xx_ll_usart.h>
    #include <stm32f3xx_ll_utils.h>
    #include <stm32f3xx_ll_wwdg.h>

    // size, determines position of the flash storage
    #define FLASH_SIZE (256*1024)
    #define SETTINGS_BLOCK_SIZE (1024*2) // this must be a multiple of FLASH pages
    #define SETTINGS_FLASH_ADDR (0x08000000 + FLASH_SIZE - SETTINGS_BLOCK_SIZE)

    // Number of GPIO ports A,B,C...
    #define PORTS_COUNT 6

    // Lock jumper config
    #define LOCK_JUMPER_PORT 'A'
    #define LOCK_JUMPER_PIN  0
    #define PLAT_LOCK_BTN 1 // toggle button instead of a jumper
    #define PLAT_LOCK_1CLOSED 1 // toggle button active in log. 1

    // Status LED config
    #define STATUS_LED_PORT 'E'
    #define STATUS_LED_PIN  13

#elif defined(GEX_PLAT_F407_DISCOVERY)

    // platform name for the version string
    #define GEX_PLATFORM "STM32F407-Discovery"
    #define PLAT_AHB_MHZ 168
    #define PLAT_APB1_MHZ 48
    #define PLAT_APB2_MHZ 96

    #define PLAT_USB_PHYCLOCK 1
    #define PLAT_USB_OTGFS 1

    #include <stm32f4xx.h>
    #include <stm32f4xx_hal.h>
    #include <stm32f4xx_ll_adc.h>
    #include <stm32f4xx_ll_crc.h>
    #include <stm32f4xx_ll_dac.h>
    #include <stm32f4xx_ll_dma.h>
    #include <stm32f4xx_ll_dma2d.h>
    #include <stm32f4xx_ll_exti.h>
    #include <stm32f4xx_ll_fmc.h>
    #include <stm32f4xx_ll_fsmc.h>
    #include <stm32f4xx_ll_gpio.h>
    #include <stm32f4xx_ll_i2c.h>
    #include <stm32f4xx_ll_lptim.h>
    #include <stm32f4xx_ll_pwr.h>
    #include <stm32f4xx_ll_rcc.h>
    #include <stm32f4xx_ll_rng.h>
    #include <stm32f4xx_ll_rtc.h>
    #include <stm32f4xx_ll_sdmmc.h>
    #include <stm32f4xx_ll_spi.h>
    #include <stm32f4xx_ll_tim.h>
    #include <stm32f4xx_ll_usart.h>
    #include <stm32f4xx_ll_usb.h>
    #include <stm32f4xx_ll_utils.h>

    // size, determines position of the flash storage

    // we use the first 128kB sector. Unfortunately the whole sector must be erased before writing.
    #define SETTINGS_FLASH_SECTOR FLASH_SECTOR_5
    #define SETTINGS_BLOCK_SIZE (1024*2)
    #define SETTINGS_FLASH_ADDR (0x08000000 + (16*4+64)*1024)

    // Number of GPIO ports A,B,C...
    #define PORTS_COUNT 6

    // Lock jumper config
    #define LOCK_JUMPER_PORT 'A'
    #define LOCK_JUMPER_PIN  0
    #define PLAT_LOCK_BTN 1 // toggle button instead of a jumper
    #define PLAT_LOCK_1CLOSED 1 // toggle button active in log. 1

    // Status LED config
    #define STATUS_LED_PORT 'D' // orange
    #define STATUS_LED_PIN  13

#else
    #error "BAD PLATFORM! Please select GEX platform using a -DGEX_PLAT_* compile flag"
#endif

#define PLAT_AHB_HZ (PLAT_AHB_MHZ*1000000)
#define PLAT_APB1_HZ (PLAT_APB1_MHZ*1000000)
#define PLAT_APB2_HZ (PLAT_APB2_MHZ*1000000)

#endif //GEX_PLAT_COMPAT_H