/**
  ******************************************************************************
  * @file           : usbd_conf.h
  * @version        : v2.0_Cube
  * @brief          : Header for usbd_conf file.
  ******************************************************************************
  * This notice applies to any and all portions of this file
  * that are not between comment pairs USER CODE BEGIN and
  * USER CODE END. Other portions of this file, whether 
  * inserted by the user or by software development tools
  * are owned by their respective copyright owners.
  *
  * Copyright (c) 2017 STMicroelectronics International N.V. 
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without 
  * modification, are permitted, provided that the following conditions are met:
  *
  * 1. Redistribution of source code must retain the above copyright notice, 
  *    this list of conditions and the following disclaimer.
  * 2. Redistributions in binary form must reproduce the above copyright notice,
  *    this list of conditions and the following disclaimer in the documentation
  *    and/or other materials provided with the distribution.
  * 3. Neither the name of STMicroelectronics nor the names of other 
  *    contributors to this software may be used to endorse or promote products 
  *    derived from this software without specific written permission.
  * 4. This software, including modifications and/or derivative works of this 
  *    software, must execute solely and exclusively on microcontroller or
  *    microprocessor devices manufactured by or for STMicroelectronics.
  * 5. Redistribution and use of this software other than as permitted under 
  *    this license is void and will automatically terminate your rights under 
  *    this license. 
  *
  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" 
  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT 
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT 
  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_CONF__H__
#define __USBD_CONF__H__
#ifdef __cplusplus
 extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
//#include <stdio.h>
//#include <stdlib.h>
#include "platform.h"
#include "usbd_def.h"

/** @addtogroup USBD_OTG_DRIVER
  * @{
  */
  
/** @defgroup USBD_CONF
  * @brief usb otg low level driver configuration file
  * @{
  */ 

/** @defgroup USBD_CONF_Exported_Defines
  * @{
  */ 

/*---------- -----------*/
#define USBD_MAX_NUM_INTERFACES     2
/*---------- -----------*/
#define USBD_MAX_NUM_CONFIGURATION     1
/*---------- -----------*/
//#define USBD_MAX_STR_DESC_SIZ     128 /* Moved to plat_compat.h */
/*---------- -----------*/
#define USBD_SUPPORT_USER_STRING     1
/*---------- -----------*/
#define USBD_DEBUG_LEVEL     3
/*---------- -----------*/
#define USBD_SELF_POWERED     1
/*---------- -----------*/
//#define MSC_MEDIA_PACKET     512 /* Moved to plat_compat.h */
/****************************************/
/* #define for FS and HS identification */
#define DEVICE_FS 		0

// Custom config
#define MSC_COMPOSITE
#define CDC_COMPOSITE

#define MSC_CUSTOM_EPS
#define MSC_EPIN_ADDR                0x81
#define MSC_EPOUT_ADDR               0x01

#define CDC_CUSTOM_EPS
#define CDC_IN_EP                    0x82  /* EP1 for data IN */
#define CDC_OUT_EP                   0x04  /* EP1 for data OUT */
#define CDC_CMD_EP                   0x83  /* EP2 for CDC commands */

/** @defgroup USBD_Exported_Macros
  * @{
  */ 

/* Memory management macros */  
#define USBD_malloc               (uint32_t *)USBD_static_malloc
#define USBD_free                 USBD_static_free
//#define USBD_memset               /* Not used */
//#define USBD_memcpy               /* Not used */
//
//#define USBD_Delay   HAL_Delay

/* For footprint reasons and since only one allocation is handled in the HID class
   driver, the malloc/free is changed into a static allocation method */
void *USBD_static_malloc(uint32_t size);
void USBD_static_free(void *p);


#if (USBD_DEBUG_LEVEL > 0)
#define  USBD_UsrLog(...)   PRINTF("USB USER : ") ;\
                            PRINTF(__VA_ARGS__);\
                            PRINTF("\r\n");
#else
#define USBD_UsrLog(...)
#endif


#if (USBD_DEBUG_LEVEL > 1)

#define  USBD_ErrLog(...)   PRINTF("USB ERROR: ") ;\
                            PRINTF(__VA_ARGS__);\
                            PRINTF("\r\n");
#else
#define USBD_ErrLog(...)
#endif


#if (USBD_DEBUG_LEVEL > 2)
#define  USBD_DbgLog(...)   PRINTF("USB DEBUG: ") ;\
                            PRINTF(__VA_ARGS__);\
                            PRINTF("\r\n");
#else
#define USBD_DbgLog(...)
#endif

/**
  * @}
  */


    
/**
  * @}
  */ 

/** @defgroup USBD_CONF_Exported_Types
  * @{
  */ 
/**
  * @}
  */ 

/** @defgroup USBD_CONF_Exported_Macros
  * @{
  */ 
/**
  * @}
  */ 

/** @defgroup USBD_CONF_Exported_Variables
  * @{
  */ 
/**
  * @}
  */ 

/** @defgroup USBD_CONF_Exported_FunctionsPrototype
  * @{
  */ 
/**
  * @}
  */ 
#ifdef __cplusplus
}
#endif

#endif /*__USBD_CONF__H__*/

/**
  * @}
  */ 

/**
  * @}
  */ 
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/