Code import
This commit is contained in:
@@ -0,0 +1,351 @@
|
||||
//
|
||||
// Created by MightyPork on 2017/11/07.
|
||||
//
|
||||
|
||||
#include "platform.h"
|
||||
#include "framework/system_settings.h"
|
||||
#include "usbd_desc.h"
|
||||
#include "task_main.h"
|
||||
#include "usbd_msc.h"
|
||||
#include "usbd_cdc.h"
|
||||
#include "usbd_msc_cdc.h"
|
||||
|
||||
#define USBD_MSC_CDC_CONFIG_DESC_SIZ 98
|
||||
/* USB Mass storage device Configuration Descriptor */
|
||||
/* All Descriptors (Configuration, Interface, Endpoint, Class, Vendor */
|
||||
|
||||
// NOTE: This must NOT be in flash, otherwise the driver / peripheral crashes
|
||||
__ALIGN_BEGIN uint8_t USBD_MSC_CDC_CfgFSDesc[USBD_MSC_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
|
||||
{
|
||||
/*0*/ 0x09, /* bLength: Configuation Descriptor size */
|
||||
USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
|
||||
LOBYTE(USBD_MSC_CDC_CONFIG_DESC_SIZ), // TODO
|
||||
HIBYTE(USBD_MSC_CDC_CONFIG_DESC_SIZ),
|
||||
3, /* bNumInterfaces - 1 MSC + 2 composite CDC ACM */
|
||||
0x01, /* bConfigurationValue: */
|
||||
0, /* iConfiguration: - string descriptor */
|
||||
0xC0, /* bmAttributes: - self powered */
|
||||
150, /* MaxPower 300 mA */
|
||||
|
||||
/******************** Mass Storage interface ********************/
|
||||
/*9*/ 0x09, /* bLength: Interface Descriptor size */
|
||||
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
|
||||
0x00, /* bInterfaceNumber: Number of Interface */
|
||||
0x00, /* bAlternateSetting: Alternate setting */
|
||||
0x02, /* bNumEndpoints*/
|
||||
0x08, /* bInterfaceClass: MSC Class */ // #14
|
||||
0x06, /* bInterfaceSubClass : SCSI transparent*/
|
||||
0x50, /* nInterfaceProtocol */
|
||||
0x04, /* iInterface: String descriptor */
|
||||
|
||||
/******************** Mass Storage Endpoints ********************/
|
||||
/*18*/ 0x07, /*Endpoint descriptor length = 7*/
|
||||
0x05, /*Endpoint descriptor type */
|
||||
MSC_EPIN_ADDR, /*Endpoint address (IN, address 1) */
|
||||
0x02, /*Bulk endpoint type */
|
||||
LOBYTE(MSC_MAX_FS_PACKET),
|
||||
HIBYTE(MSC_MAX_FS_PACKET),
|
||||
0x00, /*Polling interval in milliseconds */
|
||||
|
||||
/*25*/ 0x07, /*Endpoint descriptor length = 7 */
|
||||
0x05, /*Endpoint descriptor type */
|
||||
MSC_EPOUT_ADDR, /*Endpoint address (OUT, address 1) */
|
||||
0x02, /*Bulk endpoint type */
|
||||
LOBYTE(MSC_MAX_FS_PACKET),
|
||||
HIBYTE(MSC_MAX_FS_PACKET),
|
||||
0x00, /*Polling interval in milliseconds*/
|
||||
|
||||
/********************** IFACE ASSOC *************************/
|
||||
/*32*/ 0x08, /* bLength */
|
||||
USB_DESC_TYPE_IFACE_ASSOCIATION, /* bDescriptorType */
|
||||
0x01, /* bFirstInterface */
|
||||
0x02, /* bInterfaceCount */
|
||||
0x02, /* bFunctionClass */ // #36
|
||||
0x02, /* bFunctionSubClass (ACM) */
|
||||
0x01, /* bFunctionProtocol (AT-COMMANDS) */
|
||||
0x05, /* iFunction: string descriptor */
|
||||
|
||||
/********************** ACM interface **********************/
|
||||
/*40*/ 0x09, /* bLength: Interface Descriptor size */
|
||||
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
|
||||
0x01, /* bInterfaceNumber: Number of Interface */
|
||||
0x00, /* bAlternateSetting: Alternate setting */
|
||||
0x01, /* bNumEndpoints: One endpoints used */
|
||||
0x02, /* bInterfaceClass: Communication Interface Class */ // #45
|
||||
0x02, /* bInterfaceSubClass: Abstract Control Model */
|
||||
0x01, /* bInterfaceProtocol: Common AT commands */
|
||||
0x05, /* iInterface: string descriptor */
|
||||
|
||||
/**************** Header Functional Descriptor ***************/
|
||||
/*49*/ 0x05, /* bLength: Endpoint Descriptor size */
|
||||
0x24, /* bDescriptorType: CS_INTERFACE */
|
||||
0x00, /* bDescriptorSubtype: Header Func Desc */
|
||||
0x10, /* bcdCDC: spec release number */
|
||||
0x01,
|
||||
|
||||
/*********** Call Management Functional Descriptor **********/
|
||||
/*54*/ 0x05, /* bFunctionLength */
|
||||
0x24, /* bDescriptorType: CS_INTERFACE */
|
||||
0x01, /* bDescriptorSubtype: Call Management Func Desc */
|
||||
0x00, /* bmCapabilities: D0+D1 */
|
||||
0x02, /* bDataInterface: 2 */
|
||||
|
||||
/*************** ACM Functional Descriptor ***************/
|
||||
/*59*/ 0x04, /* bFunctionLength */
|
||||
0x24, /* bDescriptorType: CS_INTERFACE */
|
||||
0x02, /* bDescriptorSubtype: Abstract Control Management desc */
|
||||
0x06, /* bmCapabilities XXX was:0x02? */
|
||||
|
||||
/************* Union Functional Descriptor **************/
|
||||
/*63*/ 0x05, /* bFunctionLength */
|
||||
0x24, /* bDescriptorType: CS_INTERFACE */
|
||||
0x06, /* bDescriptorSubtype: Union func desc */
|
||||
0x01, /* bMasterInterface: Communication class interface */
|
||||
0x02, /* bSlaveInterface0: Data Class Interface */
|
||||
|
||||
/******************** CDC Endpoints ********************/
|
||||
|
||||
/// Command endpoint
|
||||
/*68*/ 0x07, /* bLength: Endpoint Descriptor size */
|
||||
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
|
||||
CDC_CMD_EP, /* bEndpointAddress */
|
||||
0x03, /* bmAttributes: Interrupt */
|
||||
LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: TODO: 2?*/
|
||||
HIBYTE(CDC_CMD_PACKET_SIZE),
|
||||
0xFF, /* bInterval: TODO was 0x10?*/
|
||||
|
||||
/********** CDC Data Class Interface Descriptor ***********/
|
||||
/*75*/ 0x09, /* bLength: Endpoint Descriptor size */
|
||||
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
|
||||
0x02, /* bInterfaceNumber: Number of Interface */
|
||||
0x00, /* bAlternateSetting: Alternate setting */
|
||||
0x02, /* bNumEndpoints: Two endpoints used */
|
||||
0x0A, /* bInterfaceClass: CDC */ // #80
|
||||
0x00, /* bInterfaceSubClass: */
|
||||
0x00, /* bInterfaceProtocol: */
|
||||
0x06, /* iInterface: TODO: string descriptor */
|
||||
|
||||
/// Endpoint OUT Descriptor
|
||||
/*84*/ 0x07, /* bLength: Endpoint Descriptor size */
|
||||
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
|
||||
CDC_OUT_EP, /* bEndpointAddress */
|
||||
0x02, /* bmAttributes: Bulk */
|
||||
LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: TODO 8? */
|
||||
HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE),
|
||||
0x00, /* bInterval: ignore for Bulk transfer */
|
||||
|
||||
/// Endpoint IN Descriptor
|
||||
/*91*/ 0x07, /* bLength: Endpoint Descriptor size */
|
||||
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
|
||||
CDC_IN_EP, /* bEndpointAddress */
|
||||
0x02, /* bmAttributes: Bulk */
|
||||
LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: TODO 16? */
|
||||
HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE),
|
||||
0x00 /* bInterval: ignore for Bulk transfer */
|
||||
};
|
||||
|
||||
|
||||
/* USB Standard Device Descriptor */
|
||||
__ALIGN_BEGIN uint8_t USBD_MSC_CDC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
|
||||
{
|
||||
USB_LEN_DEV_QUALIFIER_DESC,
|
||||
USB_DESC_TYPE_DEVICE_QUALIFIER,
|
||||
0x00,
|
||||
0x02,
|
||||
0x00,
|
||||
0x00,
|
||||
0x00,
|
||||
MSC_MAX_FS_PACKET,
|
||||
0x01,
|
||||
0x00,
|
||||
};
|
||||
|
||||
static uint8_t USBD_MSC_CDC_Init(struct _USBD_HandleTypeDef *pdev, uint8_t cfgidx)
|
||||
{
|
||||
// this is not correct, but will work if neither returns BUSY (which they don't)
|
||||
uint8_t ret = 0;
|
||||
ret |= USBD_MSC_Init(pdev, cfgidx);
|
||||
ret |= USBD_CDC_Init(pdev, cfgidx);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static uint8_t USBD_MSC_CDC_DeInit(struct _USBD_HandleTypeDef *pdev, uint8_t cfgidx)
|
||||
{
|
||||
uint8_t ret = 0;
|
||||
ret |= USBD_MSC_DeInit(pdev, cfgidx);
|
||||
ret |= USBD_CDC_DeInit(pdev, cfgidx);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Control Endpoints*/
|
||||
static uint8_t USBD_MSC_CDC_Setup(struct _USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req)
|
||||
{
|
||||
static uint8_t interface_bit;
|
||||
|
||||
// handle common
|
||||
switch (req->bmRequest & USB_REQ_TYPE_MASK) {
|
||||
case USB_REQ_TYPE_STANDARD:
|
||||
switch (req->bRequest) {
|
||||
// those don't really do anything useful, but each class implements
|
||||
// them and it would send the data twice.
|
||||
case USB_REQ_GET_INTERFACE :
|
||||
USBD_CtlSendData(pdev, &interface_bit, 1);
|
||||
return USBD_OK;
|
||||
|
||||
case USB_REQ_SET_INTERFACE :
|
||||
interface_bit = (uint8_t) (req->wValue);
|
||||
return USBD_OK;
|
||||
}
|
||||
}
|
||||
|
||||
// class specific, or Interface -> Clear Feature
|
||||
USBD_MSC_Setup(pdev, req);
|
||||
USBD_CDC_Setup(pdev, req);
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
#if 0
|
||||
static uint8_t USBD_MSC_CDC_EP0_TxSent(struct _USBD_HandleTypeDef *pdev)
|
||||
{
|
||||
// not handled by either
|
||||
xTaskNotify(tskUsbEventHandle, USBEVT_FLAG_EP0_TX_SENT, eSetBits);
|
||||
return USBD_OK;
|
||||
}
|
||||
#endif
|
||||
|
||||
static uint8_t USBD_MSC_CDC_EP0_RxReady(struct _USBD_HandleTypeDef *pdev)
|
||||
{
|
||||
BaseType_t xHigherPriorityTaskWoken = pdFALSE;
|
||||
xTaskNotifyFromISR(tskMainHandle, USBEVT_FLAG_EP0_RX_RDY, eSetBits, &xHigherPriorityTaskWoken);
|
||||
portYIELD_FROM_ISR(xHigherPriorityTaskWoken);
|
||||
//USBD_CDC_EP0_RxReady(pdev);
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
/* Class Specific Endpoints*/
|
||||
static uint8_t USBD_MSC_CDC_DataIn(struct _USBD_HandleTypeDef *pdev, uint8_t epnum)
|
||||
{
|
||||
BaseType_t xHigherPriorityTaskWoken = pdFALSE;
|
||||
xTaskNotifyFromISR(tskMainHandle, USBEVT_FLAG_EPx_IN(epnum), eSetBits, &xHigherPriorityTaskWoken);
|
||||
portYIELD_FROM_ISR(xHigherPriorityTaskWoken);
|
||||
// if (epnum == MSC_EPIN_ADDR||epnum==MSC_EPOUT_ADDR) USBD_MSC_DataIn(pdev, epnum);
|
||||
// else if (epnum == CDC_IN_EP||epnum == CDC_CMD_EP) USBD_CDC_DataIn(pdev, epnum);
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
static uint8_t USBD_MSC_CDC_DataOut(struct _USBD_HandleTypeDef *pdev, uint8_t epnum)
|
||||
{
|
||||
BaseType_t xHigherPriorityTaskWoken = pdFALSE;
|
||||
xTaskNotifyFromISR(tskMainHandle, USBEVT_FLAG_EPx_OUT(epnum), eSetBits, &xHigherPriorityTaskWoken);
|
||||
portYIELD_FROM_ISR(xHigherPriorityTaskWoken);
|
||||
// if (epnum == MSC_EPIN_ADDR||epnum == MSC_EPOUT_ADDR) USBD_MSC_DataOut(pdev, epnum);
|
||||
// else if (epnum == CDC_OUT_EP||epnum == CDC_CMD_EP) USBD_CDC_DataOut(pdev, epnum);
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
#if 0
|
||||
static uint8_t USBD_MSC_CDC_SOF(struct _USBD_HandleTypeDef *pdev)
|
||||
{
|
||||
// not handled by either
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
static uint8_t USBD_MSC_CDC_IsoINIncomplete(struct _USBD_HandleTypeDef *pdev, uint8_t epnum)
|
||||
{
|
||||
// not handled by either
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
static uint8_t USBD_MSC_CDC_IsoOUTIncomplete(struct _USBD_HandleTypeDef *pdev, uint8_t epnum)
|
||||
{
|
||||
// not handled by either
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
static uint8_t *USBD_MSC_CDC_GetUsrStrDescriptor(struct _USBD_HandleTypeDef *pdev, uint8_t index, uint16_t *length)
|
||||
{
|
||||
// not handled by either
|
||||
return USBD_OK;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if 0
|
||||
uint8_t *USBD_MSC_CDC_GetHSCfgDesc (uint16_t *length)
|
||||
{
|
||||
// *length = sizeof (USBD_MSC_CDC_CfgHSDesc);
|
||||
// return USBD_MSC_CDC_CfgHSDesc;
|
||||
*length = sizeof (USBD_MSC_CDC_CfgFSDesc);
|
||||
return USBD_MSC_CDC_CfgFSDesc;
|
||||
}
|
||||
#endif
|
||||
|
||||
uint8_t *USBD_MSC_CDC_GetFSCfgDesc (uint16_t *length)
|
||||
{
|
||||
*length = sizeof (USBD_MSC_CDC_CfgFSDesc);
|
||||
|
||||
// Optionally hide CDC-ACM by setting its class to Vendor Specific
|
||||
bool cdc_visible = SystemSettings.visible_vcom;
|
||||
USBD_MSC_CDC_CfgFSDesc[36] = (uint8_t) (cdc_visible ? 0x02 : 0xFF);
|
||||
USBD_MSC_CDC_CfgFSDesc[45] = (uint8_t) (cdc_visible ? 0x02 : 0xFF);
|
||||
USBD_MSC_CDC_CfgFSDesc[80] = (uint8_t) (cdc_visible ? 0x0A : 0xFF);
|
||||
|
||||
// Optionally hide settings (if lock jumper is installed)
|
||||
bool msc_visible = SystemSettings.editable;
|
||||
USBD_MSC_CDC_CfgFSDesc[14] = (uint8_t) (msc_visible ? 0x08 : 0xFF);
|
||||
|
||||
return USBD_MSC_CDC_CfgFSDesc;
|
||||
}
|
||||
|
||||
#if 0
|
||||
uint8_t *USBD_MSC_CDC_GetOtherSpeedCfgDesc (uint16_t *length)
|
||||
{
|
||||
// *length = sizeof (USBD_MSC_CDC_OtherSpeedCfgDesc);
|
||||
// return USBD_MSC_CDC_OtherSpeedCfgDesc;
|
||||
*length = sizeof (USBD_MSC_CDC_CfgFSDesc);
|
||||
return USBD_MSC_CDC_CfgFSDesc;
|
||||
}
|
||||
#endif
|
||||
|
||||
uint8_t *USBD_MSC_CDC_GetDeviceQualifierDescriptor (uint16_t *length)
|
||||
{
|
||||
*length = sizeof (USBD_MSC_CDC_DeviceQualifierDesc);
|
||||
return USBD_MSC_CDC_DeviceQualifierDesc;
|
||||
}
|
||||
|
||||
uint8_t *USBD_MSC_CDC_GetUsrStrDescriptor(struct _USBD_HandleTypeDef *pdev, uint8_t index, uint16_t *length)
|
||||
{
|
||||
const char *str;
|
||||
switch (index) {
|
||||
case 0x04: str = "Settings Virtual Mass Storage"; break;
|
||||
case 0x05: str = "Virtual Comport ACM"; break;
|
||||
case 0x06: str = "Virtual Comport CDC"; break;
|
||||
default: str = "No Descriptor";
|
||||
}
|
||||
USBD_GetString ((uint8_t *) str, USBD_StrDesc, length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
USBD_ClassTypeDef USBD_MSC_CDC =
|
||||
{
|
||||
USBD_MSC_CDC_Init,
|
||||
USBD_MSC_CDC_DeInit,
|
||||
USBD_MSC_CDC_Setup,
|
||||
|
||||
NULL, // USBD_MSC_CDC_EP0_TxSent,
|
||||
USBD_MSC_CDC_EP0_RxReady,
|
||||
|
||||
USBD_MSC_CDC_DataIn,
|
||||
USBD_MSC_CDC_DataOut,
|
||||
|
||||
NULL, // USBD_MSC_CDC_SOF,
|
||||
NULL, // USBD_MSC_CDC_IsoINIncomplete,
|
||||
NULL, // USBD_MSC_CDC_IsoOUTIncomplete,
|
||||
|
||||
// we return only the FS one, others are useless
|
||||
USBD_MSC_CDC_GetFSCfgDesc, //USBD_MSC_CDC_GetHSCfgDesc,
|
||||
USBD_MSC_CDC_GetFSCfgDesc,
|
||||
USBD_MSC_CDC_GetFSCfgDesc, //USBD_MSC_CDC_GetOtherSpeedCfgDesc,
|
||||
|
||||
USBD_MSC_CDC_GetDeviceQualifierDescriptor,
|
||||
USBD_MSC_CDC_GetUsrStrDescriptor
|
||||
};
|
||||
@@ -0,0 +1,11 @@
|
||||
//
|
||||
// Created by MightyPork on 2017/11/07.
|
||||
//
|
||||
|
||||
#ifndef GEX_USBD_CDC_MSC_H
|
||||
#define GEX_USBD_CDC_MSC_H
|
||||
|
||||
#include "usbd_def.h"
|
||||
extern USBD_ClassTypeDef USBD_MSC_CDC;
|
||||
|
||||
#endif //GEX_USBD_CDC_MSC_H
|
||||
@@ -0,0 +1,115 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : USB_DEVICE
|
||||
* @version : v2.0_Cube
|
||||
* @brief : This file implements the USB Device
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "platform.h"
|
||||
|
||||
#include "usb_device.h"
|
||||
#include "usbd_core.h"
|
||||
#include "usbd_desc.h"
|
||||
#include "usbd_msc.h"
|
||||
#include "usbd_storage_if.h"
|
||||
#include "usbd_cdc.h"
|
||||
#include "usbd_cdc_if.h"
|
||||
#include "usbd_msc_cdc.h"
|
||||
|
||||
/* USB Device Core handle declaration */
|
||||
USBD_HandleTypeDef hUsbDeviceFS;
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
extern PCD_HandleTypeDef hpcd_USB_FS;
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* init function */
|
||||
void MX_USB_DEVICE_Init(void)
|
||||
{
|
||||
/* USER CODE BEGIN USB_DEVICE_Init_PreTreatment */
|
||||
|
||||
/* USER CODE END USB_DEVICE_Init_PreTreatment */
|
||||
|
||||
/* Init Device Library,Add Supported Class and Start the library*/
|
||||
USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS);
|
||||
|
||||
USBD_RegisterClass(&hUsbDeviceFS, &USBD_MSC_CDC);
|
||||
|
||||
USBD_MSC_RegisterStorage(&hUsbDeviceFS, &USBD_Storage_Interface_fops_FS);
|
||||
USBD_CDC_RegisterInterface(&hUsbDeviceFS, &USBD_Interface_fops_FS);
|
||||
|
||||
USBD_Start(&hUsbDeviceFS);
|
||||
|
||||
/* USER CODE BEGIN USB_DEVICE_Init_PostTreatment */
|
||||
|
||||
/* USER CODE END USB_DEVICE_Init_PostTreatment */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN USB_IRQ */
|
||||
/**
|
||||
* @brief This function handles USB low priority or CAN RX0 interrupts.
|
||||
*/
|
||||
void USB_LP_CAN1_RX0_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 0 */
|
||||
|
||||
/* USER CODE END USB_LP_CAN1_RX0_IRQn 0 */
|
||||
HAL_PCD_IRQHandler(&hpcd_USB_FS);
|
||||
/* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 1 */
|
||||
|
||||
/* USER CODE END USB_LP_CAN1_RX0_IRQn 1 */
|
||||
}
|
||||
/* USER CODE END USB_IRQ */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,78 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : USB_DEVICE
|
||||
* @version : v2.0_Cube
|
||||
* @brief : Header for usb_device file.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __usb_device_H
|
||||
#define __usb_device_H
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "platform.h"
|
||||
#include "usbd_def.h"
|
||||
|
||||
extern USBD_HandleTypeDef hUsbDeviceFS;
|
||||
|
||||
/* USB_Device init function */
|
||||
void MX_USB_DEVICE_Init(void);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /*__usb_device_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,326 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : usbd_cdc_if.c
|
||||
* @brief :
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "platform.h"
|
||||
#include "usbd_cdc_if.h"
|
||||
/* USER CODE BEGIN INCLUDE */
|
||||
#include "task_main.h"
|
||||
#include "TinyFrame.h"
|
||||
#include "comm/messages.h"
|
||||
|
||||
extern osSemaphoreId semVcomTxReadyHandle;
|
||||
/* USER CODE END INCLUDE */
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC
|
||||
* @brief usbd core module
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
/* USER CODE BEGIN PRIVATE_TYPES */
|
||||
/* USER CODE END PRIVATE_TYPES */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
/* USER CODE BEGIN PRIVATE_DEFINES */
|
||||
/* Define size for the receive and transmit buffer over CDC */
|
||||
/* It's up to user to redefine and/or remove those define */
|
||||
#define APP_RX_DATA_SIZE 64
|
||||
#define APP_TX_DATA_SIZE 64
|
||||
/* USER CODE END PRIVATE_DEFINES */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
/* USER CODE BEGIN PRIVATE_MACRO */
|
||||
/* USER CODE END PRIVATE_MACRO */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
/* Create buffer for reception and transmission */
|
||||
/* It's up to user to redefine and/or remove those define */
|
||||
/* Received Data over USB are stored in this buffer */
|
||||
uint8_t UserRxBufferFS[APP_RX_DATA_SIZE];
|
||||
|
||||
/* Send Data over USB CDC are stored in this buffer */
|
||||
//uint8_t UserTxBufferFS[APP_TX_DATA_SIZE];
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_VARIABLES */
|
||||
/* USER CODE END PRIVATE_VARIABLES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_IF_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
extern USBD_HandleTypeDef hUsbDeviceFS;
|
||||
/* USER CODE BEGIN EXPORTED_VARIABLES */
|
||||
/* USER CODE END EXPORTED_VARIABLES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
static int8_t CDC_Init_FS (void);
|
||||
static int8_t CDC_DeInit_FS (void);
|
||||
static int8_t CDC_Control_FS (uint8_t cmd, uint8_t* pbuf, uint16_t length);
|
||||
static int8_t CDC_Receive_FS (uint8_t *Buf, uint32_t *Len);
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */
|
||||
/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
USBD_CDC_ItfTypeDef USBD_Interface_fops_FS =
|
||||
{
|
||||
CDC_Init_FS,
|
||||
CDC_DeInit_FS,
|
||||
CDC_Control_FS,
|
||||
CDC_Receive_FS
|
||||
};
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/**
|
||||
* @brief CDC_Init_FS
|
||||
* Initializes the CDC media low layer over the FS USB IP
|
||||
* @param None
|
||||
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
|
||||
*/
|
||||
static int8_t CDC_Init_FS(void)
|
||||
{
|
||||
/* USER CODE BEGIN 3 */
|
||||
/* Set Application Buffers */
|
||||
USBD_CDC_SetTxBuffer(&hUsbDeviceFS, NULL, 0);
|
||||
USBD_CDC_SetRxBuffer(&hUsbDeviceFS, UserRxBufferFS);
|
||||
|
||||
return (USBD_OK);
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief CDC_DeInit_FS
|
||||
* DeInitializes the CDC media low layer
|
||||
* @param None
|
||||
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
|
||||
*/
|
||||
static int8_t CDC_DeInit_FS(void)
|
||||
{
|
||||
/* USER CODE BEGIN 4 */
|
||||
return (USBD_OK);
|
||||
/* USER CODE END 4 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief CDC_Control_FS
|
||||
* Manage the CDC class requests
|
||||
* @param cmd: Command code
|
||||
* @param pbuf: Buffer containing command data (request parameters)
|
||||
* @param length: Number of data to be sent (in bytes)
|
||||
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
|
||||
*/
|
||||
static int8_t CDC_Control_FS (uint8_t cmd, uint8_t* pbuf, uint16_t length)
|
||||
{
|
||||
/* USER CODE BEGIN 5 */
|
||||
switch (cmd)
|
||||
{
|
||||
case CDC_SEND_ENCAPSULATED_COMMAND:
|
||||
break;
|
||||
|
||||
case CDC_GET_ENCAPSULATED_RESPONSE:
|
||||
break;
|
||||
|
||||
case CDC_SET_COMM_FEATURE:
|
||||
break;
|
||||
|
||||
case CDC_GET_COMM_FEATURE:
|
||||
|
||||
break;
|
||||
|
||||
case CDC_CLEAR_COMM_FEATURE:
|
||||
|
||||
break;
|
||||
|
||||
/*******************************************************************************/
|
||||
/* Line Coding Structure */
|
||||
/*-----------------------------------------------------------------------------*/
|
||||
/* Offset | Field | Size | Value | Description */
|
||||
/* 0 | dwDTERate | 4 | Number |Data terminal rate, in bits per second*/
|
||||
/* 4 | bCharFormat | 1 | Number | Stop bits */
|
||||
/* 0 - 1 Stop bit */
|
||||
/* 1 - 1.5 Stop bits */
|
||||
/* 2 - 2 Stop bits */
|
||||
/* 5 | bParityType | 1 | Number | Parity */
|
||||
/* 0 - None */
|
||||
/* 1 - Odd */
|
||||
/* 2 - Even */
|
||||
/* 3 - Mark */
|
||||
/* 4 - Space */
|
||||
/* 6 | bDataBits | 1 | Number Data bits (5, 6, 7, 8 or 16). */
|
||||
/*******************************************************************************/
|
||||
case CDC_SET_LINE_CODING:
|
||||
break;
|
||||
|
||||
case CDC_GET_LINE_CODING:
|
||||
break;
|
||||
|
||||
case CDC_SET_CONTROL_LINE_STATE:
|
||||
break;
|
||||
|
||||
case CDC_SEND_BREAK:
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return (USBD_OK);
|
||||
/* USER CODE END 5 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief CDC_Receive_FS
|
||||
* Data received over USB OUT endpoint are sent over CDC interface
|
||||
* through this function.
|
||||
*
|
||||
* @note
|
||||
* This function will block any OUT packet reception on USB endpoint
|
||||
* untill exiting this function. If you exit this function before transfer
|
||||
* is complete on CDC interface (ie. using DMA controller) it will result
|
||||
* in receiving more data while previous ones are still not sent.
|
||||
*
|
||||
* @param Buf: Buffer of data to be received
|
||||
* @param Len: Number of data received (in bytes)
|
||||
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
|
||||
*/
|
||||
static int8_t CDC_Receive_FS (uint8_t* Buf, uint32_t *Len)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
// this does nothing?!
|
||||
// the buffer was already assigned in the init function and we got it as argument here?!
|
||||
// USBD_CDC_SetRxBuffer(&hUsbDeviceFS, &Buf[0]);
|
||||
|
||||
assert_param(*Len <= APP_RX_DATA_SIZE);
|
||||
USBD_CDC_ReceivePacket(&hUsbDeviceFS);
|
||||
TF_Accept(comm, Buf, *Len);
|
||||
|
||||
return (USBD_OK);
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief CDC_Transmit_FS
|
||||
* Data send over USB IN endpoint are sent over CDC interface
|
||||
* through this function.
|
||||
* @note
|
||||
*
|
||||
*
|
||||
* @param Buf: Buffer of data to be send - does not need to stay alive after this call
|
||||
* @param Len: Number of data to be send (in bytes)
|
||||
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL or USBD_BUSY
|
||||
*/
|
||||
uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len)
|
||||
{
|
||||
uint8_t result = USBD_OK;
|
||||
/* USER CODE BEGIN 7 */
|
||||
USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*)hUsbDeviceFS.pClassData2;
|
||||
if (hcdc->TxState != 0){
|
||||
return USBD_BUSY;
|
||||
}
|
||||
USBD_CDC_SetTxBuffer(&hUsbDeviceFS, Buf, Len);
|
||||
result = USBD_CDC_TransmitPacket(&hUsbDeviceFS);
|
||||
/* USER CODE END 7 */
|
||||
return result;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */
|
||||
void USBD_CDC_TransmitDone(USBD_HandleTypeDef *pdev)
|
||||
{
|
||||
assert_param(xTaskGetCurrentTaskHandle() == tskMainHandle);
|
||||
|
||||
// Notify the semaphore that we're ready to transmit more
|
||||
assert_param(semVcomTxReadyHandle != NULL);
|
||||
xSemaphoreGive(semVcomTxReadyHandle);
|
||||
}
|
||||
/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
@@ -0,0 +1,144 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : usbd_cdc_if.h
|
||||
* @brief : Header for usbd_cdc_if file.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USBD_CDC_IF_H
|
||||
#define __USBD_CDC_IF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "platform.h"
|
||||
#include "usbd_cdc.h"
|
||||
/* USER CODE BEGIN INCLUDE */
|
||||
/* USER CODE END INCLUDE */
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_IF
|
||||
* @brief header
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_IF_Exported_Defines
|
||||
* @{
|
||||
*/
|
||||
/* USER CODE BEGIN EXPORTED_DEFINES */
|
||||
/* USER CODE END EXPORTED_DEFINES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_IF_Exported_Types
|
||||
* @{
|
||||
*/
|
||||
/* USER CODE BEGIN EXPORTED_TYPES */
|
||||
/* USER CODE END EXPORTED_TYPES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_IF_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
/* USER CODE BEGIN EXPORTED_MACRO */
|
||||
/* USER CODE END EXPORTED_MACRO */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_AUDIO_IF_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
extern USBD_CDC_ItfTypeDef USBD_Interface_fops_FS;
|
||||
|
||||
/* USER CODE BEGIN EXPORTED_VARIABLES */
|
||||
/* USER CODE END EXPORTED_VARIABLES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_IF_Exported_FunctionsPrototype
|
||||
* @{
|
||||
*/
|
||||
uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len);
|
||||
|
||||
/* USER CODE BEGIN EXPORTED_FUNCTIONS */
|
||||
|
||||
/**
|
||||
* Semaphore that's "given" whenever the Tx queue is ready
|
||||
*/
|
||||
extern SemaphoreHandle_t semCDCTxReady;
|
||||
|
||||
/* USER CODE END EXPORTED_FUNCTIONS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __USBD_CDC_IF_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
+542
@@ -0,0 +1,542 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : usbd_conf.c
|
||||
* @version : v2.0_Cube
|
||||
* @brief : This file implements the board support package for the USB device library
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "platform.h"
|
||||
#include "usbd_def.h"
|
||||
#include "usbd_core.h"
|
||||
#include "usbd_msc.h"
|
||||
#include "usbd_cdc.h"
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
extern PCD_HandleTypeDef hpcd_USB_FS;
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 1 */
|
||||
/* USER CODE END 1 */
|
||||
void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
|
||||
|
||||
/*******************************************************************************
|
||||
LL Driver Callbacks (PCD -> USB Device Library)
|
||||
*******************************************************************************/
|
||||
/* MSP Init */
|
||||
void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
|
||||
{
|
||||
if(pcdHandle->Instance==USB)
|
||||
{
|
||||
/* USER CODE BEGIN USB_MspInit 0 */
|
||||
|
||||
/* USER CODE END USB_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_USB_CLK_ENABLE();
|
||||
|
||||
/* Peripheral interrupt init */
|
||||
HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 5, 0);
|
||||
HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn);
|
||||
/* USER CODE BEGIN USB_MspInit 1 */
|
||||
|
||||
/* USER CODE END USB_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
|
||||
{
|
||||
if(pcdHandle->Instance==USB)
|
||||
{
|
||||
/* USER CODE BEGIN USB_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USB_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USB_CLK_DISABLE();
|
||||
|
||||
/* Peripheral interrupt Deinit*/
|
||||
HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn);
|
||||
|
||||
/* USER CODE BEGIN USB_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USB_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Setup Stage callback
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Data Out Stage callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @param epnum: Endpoint Number
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||
{
|
||||
USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Data In Stage callback..
|
||||
* @param hpcd: PCD handle
|
||||
* @param epnum: Endpoint Number
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||
{
|
||||
USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SOF callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reset callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
// USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
|
||||
|
||||
/*Set USB Current Speed*/
|
||||
// switch (hpcd->Init.speed)
|
||||
// {
|
||||
// case PCD_SPEED_FULL:
|
||||
// speed = USBD_SPEED_FULL;
|
||||
// break;
|
||||
//
|
||||
// default:
|
||||
// speed = USBD_SPEED_FULL;
|
||||
// break;
|
||||
// }
|
||||
USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, USBD_SPEED_FULL);
|
||||
|
||||
/*Reset Device*/
|
||||
USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Suspend callback.
|
||||
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
/* Inform USB library that core enters in suspend Mode */
|
||||
USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData);
|
||||
/*Enter in STOP mode */
|
||||
/* USER CODE BEGIN 2 */
|
||||
if (hpcd->Init.low_power_enable)
|
||||
{
|
||||
/* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register */
|
||||
SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
|
||||
}
|
||||
/* USER CODE END 2 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Resume callback.
|
||||
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
/* USER CODE BEGIN 3 */
|
||||
/* USER CODE END 3 */
|
||||
USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISOOUTIncomplete callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @param epnum: Endpoint Number
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||
{
|
||||
USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISOINIncomplete callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @param epnum: Endpoint Number
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||
{
|
||||
USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ConnectCallback callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disconnect callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
LL Driver Interface (USB Device Library --> PCD)
|
||||
*******************************************************************************/
|
||||
/**
|
||||
* @brief Initializes the Low Level portion of the Device driver.
|
||||
* @param pdev: Device handle
|
||||
* @retval USBD Status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev)
|
||||
{
|
||||
/* Init USB_IP */
|
||||
/* Link The driver to the stack */
|
||||
hpcd_USB_FS.pData = pdev;
|
||||
pdev->pData = &hpcd_USB_FS;
|
||||
|
||||
hpcd_USB_FS.Instance = USB;
|
||||
hpcd_USB_FS.Init.dev_endpoints = 8;
|
||||
hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
|
||||
hpcd_USB_FS.Init.ep0_mps = DEP0CTL_MPS_8;
|
||||
hpcd_USB_FS.Init.low_power_enable = DISABLE;
|
||||
hpcd_USB_FS.Init.lpm_enable = DISABLE;
|
||||
hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
|
||||
if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
uint32_t ptr = 0;
|
||||
const int TOTAL_EPS = (USBD_NUM_ENDPOINTS*2+1);
|
||||
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, ptr = TOTAL_EPS*8); // 64
|
||||
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, ptr += 64); // 64
|
||||
|
||||
// MSC endpoints - EP1, two-way
|
||||
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , MSC_EPIN_ADDR , PCD_SNG_BUF, ptr += 64); // 64
|
||||
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , MSC_EPOUT_ADDR , PCD_SNG_BUF, ptr += 64); // 64
|
||||
|
||||
// CDC endpoints, EP2 two-way and EP3 in-only
|
||||
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , CDC_IN_EP , PCD_SNG_BUF, ptr += 64); // 64
|
||||
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , CDC_OUT_EP , PCD_SNG_BUF, ptr += 64); // 64
|
||||
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , CDC_CMD_EP , PCD_SNG_BUF, ptr += 16); // 16
|
||||
|
||||
(void)ptr;
|
||||
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
#define HAL_TO_USB_STATUS(hal) ((hal)==HAL_OK?USBD_OK:(hal)==HAL_BUSY?USBD_BUSY:USBD_FAIL)
|
||||
|
||||
/**
|
||||
* @brief De-Initializes the Low Level portion of the Device driver.
|
||||
* @param pdev: Device handle
|
||||
* @retval USBD Status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_PCD_DeInit(pdev->pData);
|
||||
return HAL_TO_USB_STATUS(hal_status);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Starts the Low Level portion of the Device driver.
|
||||
* @param pdev: Device handle
|
||||
* @retval USBD Status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_PCD_Start(pdev->pData);
|
||||
return HAL_TO_USB_STATUS(hal_status);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Stops the Low Level portion of the Device driver.
|
||||
* @param pdev: Device handle
|
||||
* @retval USBD Status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_PCD_Stop(pdev->pData);
|
||||
return HAL_TO_USB_STATUS(hal_status);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Opens an endpoint of the Low Level Driver.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint Number
|
||||
* @param ep_type: Endpoint Type
|
||||
* @param ep_mps: Endpoint Max Packet Size
|
||||
* @retval USBD Status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
|
||||
uint8_t ep_addr,
|
||||
uint8_t ep_type,
|
||||
uint16_t ep_mps)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_PCD_EP_Open(pdev->pData,
|
||||
ep_addr,
|
||||
ep_mps,
|
||||
ep_type);
|
||||
|
||||
return HAL_TO_USB_STATUS(hal_status);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Closes an endpoint of the Low Level Driver.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint Number
|
||||
* @retval USBD Status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||
{
|
||||
//trap("CloseEP noimpl"); // XXX This uses ~ 500 bytes, maybe could be disabled
|
||||
HAL_StatusTypeDef hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr);
|
||||
return HAL_TO_USB_STATUS(hal_status);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Flushes an endpoint of the Low Level Driver.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint Number
|
||||
* @retval USBD Status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr);
|
||||
return HAL_TO_USB_STATUS(hal_status);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Sets a Stall condition on an endpoint of the Low Level Driver.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint Number
|
||||
* @retval USBD Status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr);
|
||||
return HAL_TO_USB_STATUS(hal_status);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Clears a Stall condition on an endpoint of the Low Level Driver.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint Number
|
||||
* @retval USBD Status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr);
|
||||
return HAL_TO_USB_STATUS(hal_status);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns Stall condition.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint Number
|
||||
* @retval Stall (1: Yes, 0: No)
|
||||
*/
|
||||
uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||
{
|
||||
PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData;
|
||||
|
||||
if((ep_addr & 0x80) == 0x80)
|
||||
{
|
||||
return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
|
||||
}
|
||||
else
|
||||
{
|
||||
return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
|
||||
}
|
||||
}
|
||||
/**
|
||||
* @brief Assigns a USB address to the device.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint Number
|
||||
* @retval USBD Status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr);
|
||||
return HAL_TO_USB_STATUS(hal_status);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Transmits data over an endpoint.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint Number
|
||||
* @param pbuf: Pointer to data to be sent
|
||||
* @param size: Data size
|
||||
* @retval USBD Status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
|
||||
uint8_t ep_addr,
|
||||
uint8_t *pbuf,
|
||||
uint16_t size)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size);
|
||||
return HAL_TO_USB_STATUS(hal_status);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Prepares an endpoint for reception.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint Number
|
||||
* @param pbuf: Pointer to data to be received
|
||||
* @param size: Data size
|
||||
* @retval USBD Status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
|
||||
uint8_t ep_addr,
|
||||
uint8_t *pbuf,
|
||||
uint16_t size)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size);
|
||||
return HAL_TO_USB_STATUS(hal_status);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns the last transfered packet size.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint Number
|
||||
* @retval Recived Data Size
|
||||
*/
|
||||
uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||
{
|
||||
return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Delays routine for the USB Device Library.
|
||||
* @param Delay: Delay in ms
|
||||
* @retval None
|
||||
*/
|
||||
void USBD_LL_Delay (uint32_t Delay)
|
||||
{
|
||||
HAL_Delay(Delay);
|
||||
}
|
||||
|
||||
static uint32_t _static_malloc_pos = 0;
|
||||
|
||||
/**
|
||||
* @brief static single allocation.
|
||||
* @param size: size of allocated memory
|
||||
* @retval None
|
||||
*/
|
||||
void *USBD_static_malloc(uint32_t size)
|
||||
{
|
||||
// XXX this was modified to support multiple classes
|
||||
static uint32_t mem[(sizeof(USBD_MSC_BOT_HandleTypeDef)/4)+1+(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */
|
||||
uint32_t oldpos = _static_malloc_pos;
|
||||
_static_malloc_pos += size/4+1;
|
||||
return &mem[oldpos];
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Dummy memory free
|
||||
* @param *p pointer to allocated memory address
|
||||
* @retval None
|
||||
*/
|
||||
void USBD_static_free(void *p)
|
||||
{
|
||||
// This is wrong, but will work if both frees and malloc's
|
||||
// are always called together and not interleaved
|
||||
_static_malloc_pos = 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Software Device Connection
|
||||
* @param hpcd: PCD handle
|
||||
* @param state: connection state (0 : disconnected / 1: connected)
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
|
||||
{
|
||||
///* USER CODE BEGIN 5 */
|
||||
// if (state == 1)
|
||||
// {
|
||||
// /* Configure Low Connection State */
|
||||
//
|
||||
// }
|
||||
// else
|
||||
// {
|
||||
// /* Configure High Connection State */
|
||||
//
|
||||
// }
|
||||
///* USER CODE END 5 */
|
||||
}
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
+201
@@ -0,0 +1,201 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : usbd_conf.h
|
||||
* @version : v2.0_Cube
|
||||
* @brief : Header for usbd_conf file.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USBD_CONF__H__
|
||||
#define __USBD_CONF__H__
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
//#include <stdio.h>
|
||||
//#include <stdlib.h>
|
||||
#include "platform.h"
|
||||
#include "usbd_def.h"
|
||||
|
||||
/** @addtogroup USBD_OTG_DRIVER
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CONF
|
||||
* @brief usb otg low level driver configuration file
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CONF_Exported_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/*---------- -----------*/
|
||||
#define USBD_MAX_NUM_INTERFACES 2
|
||||
/*---------- -----------*/
|
||||
#define USBD_MAX_NUM_CONFIGURATION 1
|
||||
/*---------- -----------*/
|
||||
#define USBD_MAX_STR_DESC_SIZ 128
|
||||
/*---------- -----------*/
|
||||
#define USBD_SUPPORT_USER_STRING 1
|
||||
/*---------- -----------*/
|
||||
#define USBD_DEBUG_LEVEL 3
|
||||
/*---------- -----------*/
|
||||
#define USBD_SELF_POWERED 1
|
||||
/*---------- -----------*/
|
||||
#define MSC_MEDIA_PACKET 512
|
||||
/****************************************/
|
||||
/* #define for FS and HS identification */
|
||||
#define DEVICE_FS 0
|
||||
|
||||
// Custom config
|
||||
#define MSC_COMPOSITE
|
||||
#define CDC_COMPOSITE
|
||||
|
||||
#define MSC_CUSTOM_EPS
|
||||
#define MSC_EPIN_ADDR 0x81
|
||||
#define MSC_EPOUT_ADDR 0x01
|
||||
|
||||
#define CDC_CUSTOM_EPS
|
||||
#define CDC_IN_EP 0x82 /* EP1 for data IN */
|
||||
#define CDC_OUT_EP 0x02 /* EP1 for data OUT */
|
||||
#define CDC_CMD_EP 0x83 /* EP2 for CDC commands */
|
||||
|
||||
/** @defgroup USBD_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Memory management macros */
|
||||
#define USBD_malloc (uint32_t *)USBD_static_malloc
|
||||
#define USBD_free USBD_static_free
|
||||
#define USBD_memset /* Not used */
|
||||
#define USBD_memcpy /* Not used */
|
||||
|
||||
#define USBD_Delay HAL_Delay
|
||||
|
||||
/* For footprint reasons and since only one allocation is handled in the HID class
|
||||
driver, the malloc/free is changed into a static allocation method */
|
||||
void *USBD_static_malloc(uint32_t size);
|
||||
void USBD_static_free(void *p);
|
||||
|
||||
|
||||
#if (USBD_DEBUG_LEVEL > 0)
|
||||
#define USBD_UsrLog(...) PRINTF("USB USER : ") ;\
|
||||
PRINTF(__VA_ARGS__);\
|
||||
PRINTF("\r\n");
|
||||
#else
|
||||
#define USBD_UsrLog(...)
|
||||
#endif
|
||||
|
||||
|
||||
#if (USBD_DEBUG_LEVEL > 1)
|
||||
|
||||
#define USBD_ErrLog(...) PRINTF("USB ERROR: ") ;\
|
||||
PRINTF(__VA_ARGS__);\
|
||||
PRINTF("\r\n");
|
||||
#else
|
||||
#define USBD_ErrLog(...)
|
||||
#endif
|
||||
|
||||
|
||||
#if (USBD_DEBUG_LEVEL > 2)
|
||||
#define USBD_DbgLog(...) PRINTF("USB DEBUG: ") ;\
|
||||
PRINTF(__VA_ARGS__);\
|
||||
PRINTF("\r\n");
|
||||
#else
|
||||
#define USBD_DbgLog(...)
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CONF_Exported_Types
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CONF_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CONF_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CONF_Exported_FunctionsPrototype
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__USBD_CONF__H__*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
|
||||
+297
@@ -0,0 +1,297 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : usbd_desc.c
|
||||
* @version : v2.0_Cube
|
||||
* @brief : This file implements the USB Device descriptors
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "platform.h"
|
||||
#include "usbd_core.h"
|
||||
#include "usbd_desc.h"
|
||||
#include "usbd_conf.h"
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC
|
||||
* @brief USBD descriptors module
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
#define USBD_VID 1155
|
||||
#define USBD_PID_FS 22314
|
||||
#define USBD_LANGID_NUM 1033
|
||||
#define USBD_MANUFACTURER_STRING "MightyPork"
|
||||
#define USBD_PRODUCT_STRING_FS "GEX"
|
||||
#define USBD_VERSION_NUM 0x0001 // 0xMMmp
|
||||
//#define USBD_SERIALNUMBER_STRING_FS "00000000001A"
|
||||
//#define USBD_CONFIGURATION_STRING_FS "MSC Config"
|
||||
//#define USBD_INTERFACE_STRING_FS "MSC Interface"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
uint8_t * USBD_FS_DeviceDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
|
||||
uint8_t * USBD_FS_LangIDStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
|
||||
uint8_t * USBD_FS_ManufacturerStrDescriptor ( USBD_SpeedTypeDef speed , uint16_t *length);
|
||||
uint8_t * USBD_FS_ProductStrDescriptor ( USBD_SpeedTypeDef speed , uint16_t *length);
|
||||
uint8_t * USBD_FS_SerialStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
|
||||
//uint8_t * USBD_FS_ConfigStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
|
||||
//uint8_t * USBD_FS_InterfaceStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length);
|
||||
|
||||
#ifdef USB_SUPPORT_USER_STRING_DESC
|
||||
uint8_t * USBD_FS_USRStringDesc (USBD_SpeedTypeDef speed, uint8_t idx , uint16_t *length);
|
||||
#endif /* USB_SUPPORT_USER_STRING_DESC */
|
||||
|
||||
USBD_DescriptorsTypeDef FS_Desc =
|
||||
{
|
||||
USBD_FS_DeviceDescriptor,
|
||||
USBD_FS_LangIDStrDescriptor,
|
||||
USBD_FS_ManufacturerStrDescriptor,
|
||||
USBD_FS_ProductStrDescriptor,
|
||||
USBD_FS_SerialStrDescriptor,
|
||||
NULL, NULL,
|
||||
// USBD_FS_ConfigStrDescriptor,
|
||||
// USBD_FS_InterfaceStrDescriptor,
|
||||
};
|
||||
|
||||
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif
|
||||
/* USB Standard Device Descriptor */
|
||||
__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
|
||||
{
|
||||
USB_LEN_DEV_DESC, /*bLength */
|
||||
USB_DESC_TYPE_DEVICE, /*bDescriptorType*/
|
||||
0x00, /* bcdUSB 2.0 */
|
||||
0x02,
|
||||
|
||||
// magic triplet to allow use of the association descriptor
|
||||
0xEF, /*bDeviceClass*/
|
||||
0x02, /*bDeviceSubClass*/
|
||||
0x01, /*bDeviceProtocol*/
|
||||
|
||||
USB_MAX_EP0_SIZE, /*bMaxPacketSize*/
|
||||
LOBYTE(USBD_VID), /*idVendor*/
|
||||
HIBYTE(USBD_VID), /*idVendor*/
|
||||
LOBYTE(USBD_PID_FS), /*idVendor*/
|
||||
HIBYTE(USBD_PID_FS), /*idVendor*/
|
||||
LOBYTE(USBD_VERSION_NUM), /*bcdDevice rel. 2.00*/
|
||||
HIBYTE(USBD_VERSION_NUM),
|
||||
USBD_IDX_MFC_STR, /*Index of manufacturer string*/
|
||||
USBD_IDX_PRODUCT_STR, /*Index of product string*/
|
||||
USBD_IDX_SERIAL_STR, /*Index of serial number string*/
|
||||
USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/
|
||||
} ;
|
||||
/* USB_DeviceDescriptor */
|
||||
|
||||
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif
|
||||
|
||||
/* USB Standard Device Descriptor */
|
||||
__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END =
|
||||
{
|
||||
USB_LEN_LANGID_STR_DESC,
|
||||
USB_DESC_TYPE_STRING,
|
||||
LOBYTE(USBD_LANGID_NUM),
|
||||
HIBYTE(USBD_LANGID_NUM),
|
||||
};
|
||||
|
||||
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif
|
||||
__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief USBD_FS_DeviceDescriptor
|
||||
* return the device descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_FS_DeviceDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
|
||||
{
|
||||
*length = sizeof(USBD_FS_DeviceDesc);
|
||||
return USBD_FS_DeviceDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_FS_LangIDStrDescriptor
|
||||
* return the LangID string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_FS_LangIDStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
|
||||
{
|
||||
*length = sizeof(USBD_LangIDDesc);
|
||||
return USBD_LangIDDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_FS_ProductStrDescriptor
|
||||
* return the product string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_FS_ProductStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
|
||||
{
|
||||
USBD_GetString (USBD_PRODUCT_STRING_FS, USBD_StrDesc, length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_FS_ManufacturerStrDescriptor
|
||||
* return the manufacturer string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_FS_ManufacturerStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
|
||||
{
|
||||
USBD_GetString (USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief USBD_FS_SerialStrDescriptor
|
||||
* return the serial number string descriptor
|
||||
* @param speed : current device speed
|
||||
* @param length : pointer to data length variable
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_FS_SerialStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
|
||||
{
|
||||
char buff[25];
|
||||
fixup_sprintf(buff, "%08"PRIX32"%08"PRIX32"%08"PRIX32,
|
||||
LL_GetUID_Word0(),
|
||||
LL_GetUID_Word1(),
|
||||
LL_GetUID_Word2()
|
||||
);
|
||||
|
||||
USBD_GetString ((uint8_t *) &buff[0], USBD_StrDesc, length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
//
|
||||
///**
|
||||
//* @brief USBD_FS_ConfigStrDescriptor
|
||||
//* return the configuration string descriptor
|
||||
//* @param speed : current device speed
|
||||
//* @param length : pointer to data length variable
|
||||
//* @retval pointer to descriptor buffer
|
||||
//*/
|
||||
//uint8_t * USBD_FS_ConfigStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
|
||||
//{
|
||||
// USBD_GetString (USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
|
||||
// return USBD_StrDesc;
|
||||
//}
|
||||
//
|
||||
///**
|
||||
//* @brief USBD_HS_InterfaceStrDescriptor
|
||||
//* return the interface string descriptor
|
||||
//* @param speed : current device speed
|
||||
//* @param length : pointer to data length variable
|
||||
//* @retval pointer to descriptor buffer
|
||||
//*/
|
||||
//uint8_t * USBD_FS_InterfaceStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length)
|
||||
//{
|
||||
// USBD_GetString (USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
|
||||
// return USBD_StrDesc;
|
||||
//}
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
+123
@@ -0,0 +1,123 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : usbd_desc.h
|
||||
* @version : v2.0_Cube
|
||||
* @brief : Header for usbd_desc file.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USBD_DESC__H__
|
||||
#define __USBD_DESC__H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "platform.h"
|
||||
#include "usbd_def.h"
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USB_DESC
|
||||
* @brief general defines for the usb device library file
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USB_DESC_Exported_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Exported_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
extern USBD_DescriptorsTypeDef FS_Desc;
|
||||
|
||||
// Buffer for string descriptors
|
||||
extern __ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Exported_FunctionsPrototype
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __USBD_DESC_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,319 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : usbd_storage_if.c
|
||||
* @brief : Memory management layer
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include <platform/status_led.h>
|
||||
#include "platform.h"
|
||||
#include "usbd_storage_if.h"
|
||||
/* USER CODE BEGIN INCLUDE */
|
||||
#include "vfs/vfs_manager.h"
|
||||
/* USER CODE END INCLUDE */
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_STORAGE
|
||||
* @brief usbd core module
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_STORAGE_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
/* USER CODE BEGIN PRIVATE_TYPES */
|
||||
/* USER CODE END PRIVATE_TYPES */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_STORAGE_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
#define STORAGE_LUN_NBR 1
|
||||
#define STORAGE_BLK_NBR 0x10000
|
||||
#define STORAGE_BLK_SIZ 0x200
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_DEFINES */
|
||||
/* USER CODE END PRIVATE_DEFINES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_STORAGE_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
/* USER CODE BEGIN PRIVATE_MACRO */
|
||||
/* USER CODE END PRIVATE_MACRO */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_STORAGE_IF_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
/* USER CODE BEGIN INQUIRY_DATA_FS */
|
||||
/* USB Mass storage Standard Inquiry Data */
|
||||
int8_t STORAGE_Inquirydata_FS[] = {/* 36 */
|
||||
/* LUN 0 */
|
||||
0x00,
|
||||
0x80,
|
||||
0x02,
|
||||
0x02,
|
||||
(STANDARD_INQUIRY_DATA_LEN - 5),
|
||||
0x00,
|
||||
0x00,
|
||||
0x00,
|
||||
// Those strings are visible in dmesg, probably nowhere else.
|
||||
'M', 'E', 'G', 'A', 'P', 'I', 'G', ' ', /* Manufacturer : 8 bytes */
|
||||
'G', 'E', 'X', ' ', 'G', 'P', 'I', 'O', /* Product : 16 Bytes */
|
||||
'-', 'E', 'x', 'p', 'a', 'n', 'd', 'r',
|
||||
'0', '.', '0' ,'1', /* Version : 4 Bytes */
|
||||
};
|
||||
/* USER CODE END INQUIRY_DATA_FS */
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_VARIABLES */
|
||||
/* USER CODE END PRIVATE_VARIABLES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_STORAGE_IF_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
extern USBD_HandleTypeDef hUsbDeviceFS;
|
||||
/* USER CODE BEGIN EXPORTED_VARIABLES */
|
||||
/* USER CODE END EXPORTED_VARIABLES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_STORAGE_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
static int8_t STORAGE_Init_FS (uint8_t lun);
|
||||
static int8_t STORAGE_GetCapacity_FS (uint8_t lun,
|
||||
uint32_t *block_num,
|
||||
uint16_t *block_size);
|
||||
static int8_t STORAGE_IsReady_FS (uint8_t lun);
|
||||
static int8_t STORAGE_IsWriteProtected_FS (uint8_t lun);
|
||||
static int8_t STORAGE_Read_FS (uint8_t lun,
|
||||
uint8_t *buf,
|
||||
uint32_t blk_addr,
|
||||
uint16_t blk_len);
|
||||
static int8_t STORAGE_Write_FS (uint8_t lun,
|
||||
uint8_t *buf,
|
||||
uint32_t blk_addr,
|
||||
uint16_t blk_len);
|
||||
static int8_t STORAGE_GetMaxLun_FS (void);
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */
|
||||
/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
USBD_StorageTypeDef USBD_Storage_Interface_fops_FS =
|
||||
{
|
||||
STORAGE_Init_FS,
|
||||
STORAGE_GetCapacity_FS,
|
||||
STORAGE_IsReady_FS,
|
||||
STORAGE_IsWriteProtected_FS,
|
||||
STORAGE_Read_FS,
|
||||
STORAGE_Write_FS,
|
||||
STORAGE_GetMaxLun_FS,
|
||||
(int8_t *)STORAGE_Inquirydata_FS,
|
||||
};
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/*******************************************************************************
|
||||
* Function Name : STORAGE_Init_FS
|
||||
* Description :
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
int8_t STORAGE_Init_FS (uint8_t lun)
|
||||
{
|
||||
/* USER CODE BEGIN 2 */
|
||||
dbg("Plug In");
|
||||
vfs_mngr_fs_enable(1);
|
||||
return (USBD_OK);
|
||||
/* USER CODE END 2 */
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : STORAGE_GetCapacity_FS
|
||||
* Description :
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
int8_t STORAGE_GetCapacity_FS (uint8_t lun, uint32_t *block_num, uint16_t *block_size)
|
||||
{
|
||||
/* USER CODE BEGIN 3 */
|
||||
// *block_num = STORAGE_BLK_NBR;
|
||||
// *block_size = STORAGE_BLK_SIZ;
|
||||
// we have only one LUN
|
||||
*block_num = vfs_info.BlockCount;
|
||||
*block_size = vfs_info.BlockSize;
|
||||
vfs_printf("Get Capacity: %"PRIu32" sectors x %"PRIu16" bytes", *block_num, *block_size);
|
||||
return (USBD_OK);
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : STORAGE_IsReady_FS
|
||||
* Description :
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
int8_t STORAGE_IsReady_FS (uint8_t lun)
|
||||
{
|
||||
/* USER CODE BEGIN 4 */
|
||||
// dbg("STORAGE_IsReady_FS? %d", vfs_info.MediaReady);
|
||||
StatusLed_Set(STATUS_DISK_ATTACHED, vfs_info.MediaReady);
|
||||
|
||||
// Media change - no re-plug
|
||||
if (vfs_info.MediaChanged) {
|
||||
vfs_info.MediaChanged = false; // unset the flag
|
||||
return -1; // Notify about media change
|
||||
}
|
||||
|
||||
// Plug out/in
|
||||
return vfs_info.MediaReady ? USBD_OK : USBD_BUSY;
|
||||
// return (USBD_OK);
|
||||
/* USER CODE END 4 */
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : STORAGE_IsWriteProtected_FS
|
||||
* Description :
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
int8_t STORAGE_IsWriteProtected_FS (uint8_t lun)
|
||||
{
|
||||
/* USER CODE BEGIN 5 */
|
||||
// dbg("STORAGE_IsWriteProtected_FS? no");
|
||||
return false;
|
||||
// return (USBD_OK);
|
||||
/* USER CODE END 5 */
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : STORAGE_Read_FS
|
||||
* Description :
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
int8_t STORAGE_Read_FS (uint8_t lun,
|
||||
uint8_t *buf,
|
||||
uint32_t blk_addr,
|
||||
uint16_t blk_len)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
// dbg("rd lun %d adr %d len %d", lun, blk_addr, blk_len);
|
||||
vfs_if_usbd_msc_read_sect(blk_addr, buf, blk_len); // ????
|
||||
return (USBD_OK);
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : STORAGE_Write_FS
|
||||
* Description :
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
int8_t STORAGE_Write_FS (uint8_t lun,
|
||||
uint8_t *buf,
|
||||
uint32_t blk_addr,
|
||||
uint16_t blk_len)
|
||||
{
|
||||
/* USER CODE BEGIN 7 */
|
||||
// dbg("STORAGE_Write_FS");
|
||||
vfs_if_usbd_msc_write_sect(blk_addr, buf, blk_len); // ???
|
||||
return (USBD_OK);
|
||||
/* USER CODE END 7 */
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : STORAGE_GetMaxLun_FS
|
||||
* Description :
|
||||
* Input : None.
|
||||
* Output : None.
|
||||
* Return : None.
|
||||
*******************************************************************************/
|
||||
int8_t STORAGE_GetMaxLun_FS (void)
|
||||
{
|
||||
/* USER CODE BEGIN 8 */
|
||||
return 0; // we have 1 LUN
|
||||
// return (STORAGE_LUN_NBR - 1);
|
||||
/* USER CODE END 8 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */
|
||||
/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,138 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : usbd_storage_if.h
|
||||
* @brief : header file for the usbd_storage_if.c file
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
|
||||
#ifndef __USBD_STORAGE_IF_H_
|
||||
#define __USBD_STORAGE_IF_H_
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "platform.h"
|
||||
#include "usbd_msc.h"
|
||||
/* USER CODE BEGIN INCLUDE */
|
||||
/* USER CODE END INCLUDE */
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_STORAGE
|
||||
* @brief header file for the USBD_STORAGE.c file
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_STORAGE_Exported_Defines
|
||||
* @{
|
||||
*/
|
||||
/* USER CODE BEGIN EXPORTED_DEFINES */
|
||||
/* USER CODE END EXPORTED_DEFINES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_STORAGE_Exported_Types
|
||||
* @{
|
||||
*/
|
||||
/* USER CODE BEGIN EXPORTED_TYPES */
|
||||
/* USER CODE END EXPORTED_TYPES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_STORAGE_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
/* USER CODE BEGIN EXPORTED_MACRO */
|
||||
/* USER CODE END EXPORTED_MACRO */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_STORAGE_Exported_Variables
|
||||
* @{
|
||||
*/
|
||||
extern USBD_StorageTypeDef USBD_Storage_Interface_fops_FS;
|
||||
|
||||
/* USER CODE BEGIN EXPORTED_VARIABLES */
|
||||
/* USER CODE END EXPORTED_VARIABLES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_STORAGE_Exported_FunctionsPrototype
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* USER CODE BEGIN EXPORTED_FUNCTIONS */
|
||||
/* USER CODE END EXPORTED_FUNCTIONS */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __USBD_STORAGE_IF_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Reference in New Issue
Block a user