GEX core repository.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
gex-core/platform/debug_uart.c

116 lines
3.1 KiB

7 years ago
//
// Created by MightyPork on 2017/12/15.
//
#include "platform.h"
#include "framework/resources.h"
#include "debug_uart.h"
#include "plat_compat.h"
#include "hw_utils.h"
7 years ago
#if USE_DEBUG_UART
#define DEBUG_USART_BAUD 115200
#if GEX_PLAT_F072_DISCOVERY || GEX_PLAT_F072_HUB
#define DEBUG_USART USART1
#define DEBUG_USART_RSC R_USART1
#define DEBUG_USART_PORT 'A'
#define DEBUG_USART_PIN 9
#define DEBUG_USART_AF 1
#define DEBUG_USART_PCLK PLAT_APB1_HZ
#elif GEX_PLAT_F103_BLUEPILL
#define DEBUG_USART USART2
#define DEBUG_USART_RSC R_USART2
#define DEBUG_USART_PORT 'A'
#define DEBUG_USART_PIN 2
#define DEBUG_USART_PCLK PLAT_APB1_HZ
#elif GEX_PLAT_F303_DISCOVERY
#define DEBUG_USART USART3
#define DEBUG_USART_RSC R_USART3
#define DEBUG_USART_PORT 'D'
#define DEBUG_USART_PIN 8
#define DEBUG_USART_AF 7
#define DEBUG_USART_PCLK PLAT_APB1_HZ
#elif GEX_PLAT_F407_DISCOVERY
#define DEBUG_USART USART2
#define DEBUG_USART_RSC R_USART2
#define DEBUG_USART_PORT 'A'
#define DEBUG_USART_PIN 2
#define DEBUG_USART_AF 7
#define DEBUG_USART_PCLK PLAT_APB1_HZ
#else
#error "BAD PLATFORM!"
#endif
7 years ago
/** Init the submodule. */
void DebugUart_Init(void)
{
// Debug UART
assert_param(E_SUCCESS == rsc_claim(&UNIT_SYSTEM, DEBUG_USART_RSC));
assert_param(E_SUCCESS == rsc_claim_pin(&UNIT_SYSTEM, DEBUG_USART_PORT, DEBUG_USART_PIN));
7 years ago
}
/** Init the hardware peripheral - this is called early in the boot process */
void DebugUart_PreInit(void)
{
// configure AF only if platform uses AF numbers
#if !PLAT_NO_AFNUM
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-result"
(void) hw_configure_gpio_af(DEBUG_USART_PORT, DEBUG_USART_PIN, DEBUG_USART_AF);
#pragma GCC diagnostic pop
#endif
hw_periph_clock_enable(DEBUG_USART);
7 years ago
// LL_GPIO_SetPinMode(GPIOA, LL_GPIO_PIN_2, LL_GPIO_MODE_ALTERNATE);
// LL_GPIO_SetPinOutputType(GPIOA, LL_GPIO_PIN_2, LL_GPIO_OUTPUT_PUSHPULL);
// LL_GPIO_SetPinSpeed(GPIOA, LL_GPIO_PIN_2, LL_GPIO_SPEED_FREQ_HIGH);
7 years ago
// commented out default values
// LL_USART_ConfigAsyncMode(USART2);
// LL_USART_SetDataWidth(USART2, LL_USART_DATAWIDTH_8B);
// LL_USART_SetParity(USART2, LL_USART_PARITY_NONE);
// LL_USART_SetStopBitsLength(USART2, LL_USART_STOPBITS_1);
// LL_USART_SetHWFlowCtrl(USART2, LL_USART_HWCONTROL_NONE);
LL_USART_EnableDirectionTx(DEBUG_USART);
LL_USART_SetBaudRate(DEBUG_USART, DEBUG_USART_PCLK, LL_USART_OVERSAMPLING_16, DEBUG_USART_BAUD);
LL_USART_Enable(DEBUG_USART);
7 years ago
}
void debug_write(const char *buf, uint16_t len)
7 years ago
{
for (uint16_t i = 0; i < len; i++) {
while (!LL_USART_IsActiveFlag_TC(DEBUG_USART));
LL_USART_TransmitData8(DEBUG_USART, (uint8_t) *buf++);
7 years ago
}
}
7 years ago
/** Debug print, used by debug / newlib */
ssize_t _write_r(struct _reent *rptr, int fd, const void *buf, size_t len)
{
7 years ago
trap("Use of newlib printf");
7 years ago
}
#else
// No-uart variant
void DebugUart_PreInit(void) {}
7 years ago
void DebugUart_Init(void) {}
ssize_t _write_r(struct _reent *rptr, int fd, const void *buf, size_t len) {
return len;
}
7 years ago
#endif //USE_DEBUG_UART