## UNITS.INI
## GEX v0.1.0 on STM32F072-HUB
## built Mar 28 2018 at 00:42:03

[UNITS]
# Create units by adding their names next to a type (e.g. DO=A,B),
# remove the same way. Reload to update the unit sections below.

# Digital output
DO=ce
# Digital input with triggers
DI=irq
# Neopixel RGB LED strip
NPX=
# I2C master
I2C=
# SPI master
SPI=spi
# Serial port
USART=
# 1-Wire master
1WIRE=
# Analog/digital converter
ADC=
# Shift register driver (595, 4094)
SIPO=
# Frequency and pulse measurement
FCAP=
# Capacitive touch sensing
TOUCH=
# Simple PWM output
PWMDIM=
# Two-channel analog output with waveforms
DAC=

[DO:ce@2]
# Port name
port=B
# Pins (comma separated, supports ranges)
pins=6, 2
# Initially high pins
initial=
# Open-drain pins
open-drain=

[DI:irq@3]
# Port name
port=B
# Pins (comma separated, supports ranges)
pins=8-7
# Pins with pull-up
pull-up=
# Pins with pull-down
pull-down=

# Trigger pins activated by rising/falling edge
trig-rise=
trig-fall=
# Trigger pins auto-armed by default
auto-trigger=
# Triggers hold-off time (ms)
hold-off=100

[SPI:spi@1]
# Peripheral number (SPIx)
device=1
# Pin mappings (SCK,MISO,MOSI)
#  SPI1: (0) A5,A6,A7     (1) B3,B4,B5
#  SPI2: (0) B13,B14,B15
remap=1

# Prescaller: 2,4,8,...,256
prescaller=64
# Clock polarity: 0,1 (clock idle level)
cpol=0
# Clock phase: 0,1 (active edge, 0-first, 1-second)
cpha=1
# Transmit only, disable MISO
tx-only=N
# Bit order (LSB or MSB first)
first-bit=MSB

# SS port name
port=B
# SS pins (comma separated, supports ranges)
pins=1-0