espterm-firmware/html_orig/lang/en.php

<?php

return [
	'appname' => 'ESPTerm',

	'menu.cfg_wifi' => 'WiFi Settings',
	'menu.cfg_network' => 'Network Settings',
	'menu.cfg_term' => 'Terminal Settings',
	'menu.about' => 'About ESPTerm',
	'menu.help' => 'Quick Reference',
	'menu.term' => 'Back to Terminal',
	'menu.cfg_system' => 'System Settings',
	'menu.cfg_wifi_conn' => 'Connecting to Network',

	'menu.settings' => 'Settings',

	'title.term' => 'Terminal',

	'term_nav.config' => 'Config',
	'term_nav.wifi' => 'WiFi',
	'term_nav.help' => 'Help',
	'term_nav.about' => 'About',

	'net.ap' => 'DHCP Server (AP)',
	'net.sta' => 'DHCP Client (Station)',
	'net.sta_mac' => 'Station MAC',
	'net.ap_mac' => 'AP MAC',
	'net.details' => 'MAC addresses',

	'term.defaults' => 'Initial Settings',
	'term.explain_initials' => '
		Those are the initial settings used after ESPTerm powers on. 
		The selected colors will also be used after receiving a 
		screen- or attributes-reset command. Those settings will be 
		applied immediately after saving to preview the changes live.',

	'term.example' => 'Default colors preview',

	'term.term_title' => 'Header text',
	'term.term_width' => 'Width / height',
	'term.default_fg_bg' => 'Text / background',
	'term.buttons' => 'Button labels',
	'term.theme' => 'Color scheme',
	'term.parser_tout_ms' => 'Parser timeout',
	'term.display_tout_ms' => 'Redraw delay',
	'term.display_cooldown_ms' => 'Redraw cooldown',
	'term.fn_alt_mode' => 'SS3 Fn keys',

	// terminal color labels
	'color.0' => 'Black',
	'color.1' => 'Red',
	'color.2' => 'Green',
	'color.3' => 'Yellow',
	'color.4' => 'Blue',
	'color.5' => 'Purple',
	'color.6' => 'Cyan',
	'color.7' => 'Silver',
	'color.8' => 'Gray',
	'color.9' => 'Light Red',
	'color.10' => 'Light Green',
	'color.11' => 'Light Yellow',
	'color.12' => 'Light Blue',
	'color.13' => 'Light Purple',
	'color.14' => 'Light Cyan',
	'color.15' => 'White',

	'net.explain_sta' => '
		Switch off Dynamic IP to configure the static IP address.',

	'net.explain_ap' => '
		Those settings affect the built-in DHCP server in AP mode.',

	'net.ap_dhcp_time' => 'Lease time',
	'net.ap_dhcp_start' => 'Pool start IP',
	'net.ap_dhcp_end' => 'Pool end IP',
	'net.ap_addr_ip' => 'Own IP address',
	'net.ap_addr_mask' => 'Subnet mask',

	'net.sta_dhcp_enable' => 'Use dynamic IP',
	'net.sta_addr_ip' => 'ESPTerm static IP',
	'net.sta_addr_mask' => 'Subnet mask',
	'net.sta_addr_gw' => 'Gateway IP',

	'wifi.ap' => 'Built-in Access Point',
	'wifi.sta' => 'Join Existing Network',

	'wifi.enable' => 'Enabled',
	'wifi.tpw' => 'Transmit power',
	'wifi.ap_channel' => 'Channel',
	'wifi.ap_ssid' => 'AP SSID',
	'wifi.ap_password' => 'Password',
	'wifi.ap_hidden' => 'Hide SSID',
	'wifi.sta_info' => 'Selected',

	'wifi.not_conn' => 'Not connected.',
	'wifi.sta_none' => 'None',
	'wifi.sta_active_pw' => '🔒',
	'wifi.sta_active_nopw' => '🔓 Open access',
	'wifi.connected_ip_is' => 'Connected, IP is ',
	'wifi.sta_password' => 'Password:',

	'wifi.scanning' => 'Scanning',
	'wifi.scan_now' => 'Click here to start scanning!',
	'wifi.cant_scan_no_sta' => 'Click here to enable client mode and start scanning!',
	'wifi.select_ssid' => 'Available networks:',
	'wifi.enter_passwd' => 'Enter password for ":ssid:"',
	'wifi.sta_explain' => 'After selecting a network, press Apply to connect.',

	'wifi.conn.status' => 'Status:',
	'wifi.conn.back_to_config' => 'Back to WiFi config',
	'wifi.conn.telemetry_lost' => 'Telemetry lost; something went wrong, or your device disconnected.',
	'wifi.conn.explain_android_sucks' => '
		If you\'re configuring ESPTerm via a smartphone, or were connected
		from another external network, your device may lose connection and this 
		progress indicator won\'t work. Please wait a while (~ 15 seconds), 
		then check if the connection succeeded.',

	'wifi.conn.explain_reset' => '
		To force enable the built-in AP, hold the BOOT 
		button until the blue LED starts flashing. Hold the button longer (until the LED 
		flashes rapidly) for a "factory reset".',

	'wifi.conn.disabled' =>"Station mode is disabled.",
	'wifi.conn.idle' =>"Idle, not connected and has no IP.",
	'wifi.conn.success' => "Connected! Received IP ",
	'wifi.conn.working' => "Connecting to selected AP",
	'wifi.conn.fail' => "Connection failed, check settings & try again. Cause: ",

	'system.save_restore' => 'Save & Restore',
	'system.confirm_restore' => 'Restore all settings to their default values?',
	'system.confirm_restore_hard' =>
		'Restore to firmware default settings? This will reset ' .
		'all active settings and switch to AP mode with the default SSID.',
	'system.confirm_store_defaults' =>
		'Enter admin password to confirm you want to store the current settings as defaults.',
	'system.password' => 'Admin password:',
	'system.restore_defaults' => 'Reset active settings to defaults',
	'system.write_defaults' => 'Save active settings as defaults',
	'system.restore_hard' => 'Reset active settings to firmware defaults',
	'system.explain_persist' => '
		ESPTerm contains two persistent memory banks, one for default and 
		one for active settings. Active settings can be stored as defaults 
		by the administrator (password required).
		',
	'system.uart' => 'Serial Port',
	'system.explain_uart' => '
		This form controls the primary, communication UART. The debug UART is fixed at 115.200 baud, one stop-bit and no parity.
		',
	'uart.baud' => 'Baud rate',
	'uart.parity' => 'Parity',
	'uart.parity.none' => 'None',
	'uart.parity.odd' => 'Odd',
	'uart.parity.even' => 'Even',
	'uart.stop_bits' => 'Stop-bits',
	'uart.stop_bits.one' => 'One',
	'uart.stop_bits.one_and_half' => 'One and half',
	'uart.stop_bits.two' => 'Two',

	'apply' => 'Apply!',
	'enabled' => 'Enabled',
	'disabled' => 'Disabled',
	'yes' => 'Yes',
	'no' => 'No',
	'confirm' => 'OK',
	'form_errors' => 'Validation errors for:',
];