ESPTerm - ESP8266 terminal emulator. Branches: [master] patches, [work] next release
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
espterm-firmware/user/io.c

114 lines
3.1 KiB

/*
* ----------------------------------------------------------------------------
* "THE BEER-WARE LICENSE" (Revision 42):
* Jeroen Domburg <jeroen@spritesmods.com> wrote this file. As long as you retain
* this notice you can do whatever you want with this stuff. If we meet some day,
* and you think this stuff is worth it, you can buy me a beer in return.
* ----------------------------------------------------------------------------
*/
#include <esp8266.h>
#include "ansi_parser_callbacks.h"
#include "wifimgr.h"
#include "persist.h"
#define BTNGPIO 0
/** Set to false if GPIO0 stuck low on boot (after flashing) */
static bool enable_ap_button = false;
static ETSTimer resetBtntimer;
static ETSTimer blinkyTimer;
// Holding BOOT pin triggers AP reset, then Factory Reset.
// Indicate that by blinking the on-board LED.
// -> ESP-01 has at at GPIO1, ESP-01S at GPIO2. We have to use both for compatibility.
static void ICACHE_FLASH_ATTR bootHoldIndicatorTimerCb(void *arg) {
static bool state = true;
if (GPIO_INPUT_GET(BTNGPIO)) {
// if user released, shut up
state = 1;
}
if (state) {
GPIO_OUTPUT_SET(1, 1);
GPIO_OUTPUT_SET(2, 1);
} else {
GPIO_OUTPUT_SET(1, 0);
GPIO_OUTPUT_SET(2, 0);
}
state = !state;
}
static void ICACHE_FLASH_ATTR resetBtnTimerCb(void *arg) {
static int resetCnt=0;
if (enable_ap_button && !GPIO_INPUT_GET(BTNGPIO)) {
resetCnt++;
// indicating AP reset
if (resetCnt == 2) {
// LED pin as output (Normally UART output)
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_GPIO1);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_GPIO2);
// LED on
GPIO_OUTPUT_SET(1, 0);
GPIO_OUTPUT_SET(2, 0);
os_timer_disarm(&blinkyTimer);
os_timer_setfn(&blinkyTimer, bootHoldIndicatorTimerCb, NULL);
os_timer_arm(&blinkyTimer, 500, 1);
}
// indicating we'll perform a factory reset
if (resetCnt == 10) {
os_timer_disarm(&blinkyTimer);
os_timer_setfn(&blinkyTimer, bootHoldIndicatorTimerCb, NULL);
os_timer_arm(&blinkyTimer, 100, 1);
}
} else {
// Switch LED pins back to UART mode
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_U1TXD_BK);
if (resetCnt>=12) { //6 secs pressed - FR (timer is at 500 ms)
info("Restoring to default settings via BOOT button!");
persist_restore_default();
}
else if (resetCnt>=2) { //1 sec pressed
info("BOOT-button triggered reset to AP mode...");
// Enter "rescue mode".
wificonf->opmode = STATIONAP_MODE;
wifimgr_apply_settings();
persist_store();
}
resetCnt=0;
}
}
void ICACHE_FLASH_ATTR ioInit() {
// GPIO1, GPIO2, GPIO3 - UARTs.
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO0_U, FUNC_GPIO0);
gpio_output_set(0, 0, 0, (1<<BTNGPIO));
os_timer_disarm(&resetBtntimer);
os_timer_setfn(&resetBtntimer, resetBtnTimerCb, NULL);
os_timer_arm(&resetBtntimer, 500, 1);
// One way to enter AP mode - hold GPIO0 low.
if (GPIO_INPUT_GET(BTNGPIO) == 0) {
// starting "in BOOT mode" - do not install the AP reset timer
warn("GPIO0 stuck low - AP reset button disabled.\n");
} else {
enable_ap_button = true;
dbg("Note: Hold GPIO0 low for reset to AP mode.\n");
}
}