diff --git a/README.md b/README.md
index cb508dc..5978188 100644
--- a/README.md
+++ b/README.md
@@ -51,42 +51,66 @@ The screen size is adjustable up to 25x80 (via a special control sequence) and u
   esphttpd's wifi config page, but re-styled and much improved. You can set AP SSID, channel, see the IP
   address etc right there.
 
-## Setting it all up
+## Development
+
+### Installation for development
+
+- Clone this project with `--recursive`, or afterwards run `git submodule init` and `git submodule update`.
 
 - Install [esp-open-sdk](https://github.com/pfalcon/esp-open-sdk/) and build it with 
-`make toolchain esptool libhal STANDALONE=n`. Make sure the `xtensa-lx106-elf/bin` folder is on $PATH.
-- Install [esptool](https://github.com/espressif/esptool) (it's in Arch community repo and on AUR, too)
+  `make toolchain esptool libhal STANDALONE=n`. 
+  
+  Make sure the `xtensa-lx106-elf/bin` folder is on $PATH.
+
+- Install [esptool](https://github.com/espressif/esptool) (it's in the Arch community repo and on AUR, too)
+
 - Set up udev rules so you have access to ttyUSB0 without root, eg:
 
   ```
   KERNEL=="tty[A-Z]*[0-9]*", GROUP="uucp", MODE="0666"
   ```
-- Clone this project with `--recursive`, or afterwards run `git submodule init` and `git submodule update`.
 
-## Development
+- Install Ragel if you wish to make modifications to the parser. 
+  If not, comment out it's call in `build_parser.sh`. The `.rl` file is the actual source, the `.c` is generated.
+
+- Install Ruby and then the `sass` package with `gem install sass` (or try some other implementation, such as 
+  `sassc`)
+
+- Get the IoT SDK from one of:
+
+  ```
+  ESP8266_NONOS_SDK_V2.0.0_16_08_10.zip:
+    wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1690"
+  ESP8266_NONOS_SDK_V2.0.0_16_07_19.zip:
+    wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1613"
+  ESP8266_NONOS_SDK_V1.5.4_16_05_20.zip:
+    wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1469"
+  ESP8266_NONOS_SDK_V1.5.3_16_04_18.zip:
+    wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1361"
+  ESP8266_NONOS_SDK_V1.5.2_16_01_29.zip:
+    wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1079"
+  ```
+
+  It's tested with 1.5.2, 2.0.0 won't work without adjusting the build scripts. Any 1.5.x could be fine.
+
+  The `esp-open-sdk` Makefile could also download this for you with the right flags.
 
-The web resources are in `html_orig`. To prepare for a build, run `compress_html.sh`. 
-This should pack them and put in `html`.
+- Make sure your `esphttpdconfig.mk` is set up properly - link to the SDK etc.
 
-If you're missing the compression tools, you can simply copy them there manually uncompressed and hope for the best.
+### Web resources
 
-serial comm is handled in `serial.c`, sockets etc in `user_main.c`.
+The web resources are in `html_orig`. To prepare for a build, run `build_web.sh`, which packs them and 
+copies over to `html`. The compression and minification is handled by scripts in libesphttpd, specifically
+it runs yuicompressor on js and css and gzip or heatshrink on the other files. The `html` folder is 
+then embedded in the firmware image.
 
-Get the IoT SDK from one of:
+It's kind of tricky to develop the web resources locally; you might want to try the "split image" 
+Makefile option, then you can flash just the html portion with `make htmlflash`. I haven't tried this.
 
-```
-ESP8266_NONOS_SDK_V2.0.0_16_08_10.zip:
-	wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1690"
-ESP8266_NONOS_SDK_V2.0.0_16_07_19.zip:
-	wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1613"
-ESP8266_NONOS_SDK_V1.5.4_16_05_20.zip:
-	wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1469"
-ESP8266_NONOS_SDK_V1.5.3_16_04_18.zip:
-	wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1361"
-ESP8266_NONOS_SDK_V1.5.2_16_01_29.zip:
-	wget --content-disposition "http://bbs.espressif.com/download/file.php?id=1079"
-```
+### Flashing
 
-It's tested with 1.5.2, 2.0.0 won't work without adjusting the build scripts. Any 1.5.x could be fine.
+The Makefile should automatically build the parser and web resources for you when you run `make`. 
+Sometimes it does not, particularly with `make -B`. Try just plain `make`. You can always run those 
+build scripts manually, too.
 
-To flash, just run `make flash`. First make sure your `esphttpdconfig.mk` is set up properly - link to sdk etc.
+To flash, just run `make flash`.