ESPTerm - ESP8266 terminal emulator. Branches: [master] patches, [work] next release
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
espterm-firmware/include/lwip/sys.h

338 lines
13 KiB

/*
* Copyright (c) 2001-2004 Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Adam Dunkels <adam@sics.se>
*
*/
#ifndef __LWIP_SYS_H__
#define __LWIP_SYS_H__
#include "lwip/opt.h"
#include "eagle_soc.h"
#ifdef __cplusplus
extern "C" {
#endif
#if NO_SYS
/* For a totally minimal and standalone system, we provide null
definitions of the sys_ functions. */
typedef u8_t sys_sem_t;
typedef u8_t sys_mutex_t;
typedef u8_t sys_mbox_t;
#define sys_sem_new(s, c) ERR_OK
#define sys_sem_signal(s)
#define sys_sem_wait(s)
#define sys_arch_sem_wait(s,t)
#define sys_sem_free(s)
#define sys_mutex_new(mu) ERR_OK
#define sys_mutex_lock(mu)
#define sys_mutex_unlock(mu)
#define sys_mutex_free(mu)
#define sys_mbox_new(m, s) ERR_OK
#define sys_mbox_fetch(m,d)
#define sys_mbox_tryfetch(m,d)
#define sys_mbox_post(m,d)
#define sys_mbox_trypost(m,d)
#define sys_mbox_free(m)
#define sys_thread_new(n,t,a,s,p)
#define sys_msleep(t)
#else /* NO_SYS */
/** Return code for timeouts from sys_arch_mbox_fetch and sys_arch_sem_wait */
#define SYS_ARCH_TIMEOUT 0xffffffffUL
/** sys_mbox_tryfetch() returns SYS_MBOX_EMPTY if appropriate.
* For now we use the same magic value, but we allow this to change in future.
*/
#define SYS_MBOX_EMPTY SYS_ARCH_TIMEOUT
#include "lwip/err.h"
#include "arch/sys_arch.h"
/** Function prototype for thread functions */
typedef void (*lwip_thread_fn)(void *arg);
/* Function prototypes for functions to be implemented by platform ports
(in sys_arch.c) */
/* Mutex functions: */
/** Define LWIP_COMPAT_MUTEX if the port has no mutexes and binary semaphores
should be used instead */
#if LWIP_COMPAT_MUTEX
/* for old ports that don't have mutexes: define them to binary semaphores */
#define sys_mutex_t sys_sem_t
#define sys_mutex_new(mutex) sys_sem_new(mutex, 1)
#define sys_mutex_lock(mutex) sys_sem_wait(mutex)
#define sys_mutex_unlock(mutex) sys_sem_signal(mutex)
#define sys_mutex_free(mutex) sys_sem_free(mutex)
#define sys_mutex_valid(mutex) sys_sem_valid(mutex)
#define sys_mutex_set_invalid(mutex) sys_sem_set_invalid(mutex)
#else /* LWIP_COMPAT_MUTEX */
/** Create a new mutex
* @param mutex pointer to the mutex to create
* @return a new mutex */
err_t sys_mutex_new(sys_mutex_t *mutex);
/** Lock a mutex
* @param mutex the mutex to lock */
void sys_mutex_lock(sys_mutex_t *mutex);
/** Unlock a mutex
* @param mutex the mutex to unlock */
void sys_mutex_unlock(sys_mutex_t *mutex);
/** Delete a semaphore
* @param mutex the mutex to delete */
void sys_mutex_free(sys_mutex_t *mutex);
#ifndef sys_mutex_valid
/** Check if a mutex is valid/allocated: return 1 for valid, 0 for invalid */
int sys_mutex_valid(sys_mutex_t *mutex);
#endif
#ifndef sys_mutex_set_invalid
/** Set a mutex invalid so that sys_mutex_valid returns 0 */
void sys_mutex_set_invalid(sys_mutex_t *mutex);
#endif
#endif /* LWIP_COMPAT_MUTEX */
/* Semaphore functions: */
/** Create a new semaphore
* @param sem pointer to the semaphore to create
* @param count initial count of the semaphore
* @return ERR_OK if successful, another err_t otherwise */
err_t sys_sem_new(sys_sem_t *sem, u8_t count);
/** Signals a semaphore
* @param sem the semaphore to signal */
void sys_sem_signal(sys_sem_t *sem);
/** Wait for a semaphore for the specified timeout
* @param sem the semaphore to wait for
* @param timeout timeout in milliseconds to wait (0 = wait forever)
* @return time (in milliseconds) waited for the semaphore
* or SYS_ARCH_TIMEOUT on timeout */
u32_t sys_arch_sem_wait(sys_sem_t *sem, u32_t timeout);
/** Delete a semaphore
* @param sem semaphore to delete */
void sys_sem_free(sys_sem_t *sem);
/** Wait for a semaphore - forever/no timeout */
#define sys_sem_wait(sem) sys_arch_sem_wait(sem, 0)
#ifndef sys_sem_valid
/** Check if a sempahore is valid/allocated: return 1 for valid, 0 for invalid */
int sys_sem_valid(sys_sem_t *sem);
#endif
#ifndef sys_sem_set_invalid
/** Set a semaphore invalid so that sys_sem_valid returns 0 */
void sys_sem_set_invalid(sys_sem_t *sem);
#endif
/* Time functions. */
#ifndef sys_msleep
void sys_msleep(u32_t ms); /* only has a (close to) 1 jiffy resolution. */
#endif
/* Mailbox functions. */
/** Create a new mbox of specified size
* @param mbox pointer to the mbox to create
* @param size (miminum) number of messages in this mbox
* @return ERR_OK if successful, another err_t otherwise */
err_t sys_mbox_new(sys_mbox_t *mbox, int size);
/** Post a message to an mbox - may not fail
* -> blocks if full, only used from tasks not from ISR
* @param mbox mbox to posts the message
* @param msg message to post (ATTENTION: can be NULL) */
void sys_mbox_post(sys_mbox_t *mbox, void *msg);
/** Try to post a message to an mbox - may fail if full or ISR
* @param mbox mbox to posts the message
* @param msg message to post (ATTENTION: can be NULL) */
err_t sys_mbox_trypost(sys_mbox_t *mbox, void *msg);
/** Wait for a new message to arrive in the mbox
* @param mbox mbox to get a message from
* @param msg pointer where the message is stored
* @param timeout maximum time (in milliseconds) to wait for a message
* @return time (in milliseconds) waited for a message, may be 0 if not waited
or SYS_ARCH_TIMEOUT on timeout
* The returned time has to be accurate to prevent timer jitter! */
u32_t sys_arch_mbox_fetch(sys_mbox_t *mbox, void **msg, u32_t timeout);
/* Allow port to override with a macro, e.g. special timout for sys_arch_mbox_fetch() */
#ifndef sys_arch_mbox_tryfetch
/** Wait for a new message to arrive in the mbox
* @param mbox mbox to get a message from
* @param msg pointer where the message is stored
* @param timeout maximum time (in milliseconds) to wait for a message
* @return 0 (milliseconds) if a message has been received
* or SYS_MBOX_EMPTY if the mailbox is empty */
u32_t sys_arch_mbox_tryfetch(sys_mbox_t *mbox, void **msg);
#endif
/** For now, we map straight to sys_arch implementation. */
#define sys_mbox_tryfetch(mbox, msg) sys_arch_mbox_tryfetch(mbox, msg)
/** Delete an mbox
* @param mbox mbox to delete */
void sys_mbox_free(sys_mbox_t *mbox);
#define sys_mbox_fetch(mbox, msg) sys_arch_mbox_fetch(mbox, msg, 0)
#ifndef sys_mbox_valid
/** Check if an mbox is valid/allocated: return 1 for valid, 0 for invalid */
int sys_mbox_valid(sys_mbox_t *mbox);
#endif
#ifndef sys_mbox_set_invalid
/** Set an mbox invalid so that sys_mbox_valid returns 0 */
void sys_mbox_set_invalid(sys_mbox_t *mbox);
#endif
/** The only thread function:
* Creates a new thread
* @param name human-readable name for the thread (used for debugging purposes)
* @param thread thread-function
* @param arg parameter passed to 'thread'
* @param stacksize stack size in bytes for the new thread (may be ignored by ports)
* @param prio priority of the new thread (may be ignored by ports) */
sys_thread_t sys_thread_new(const char *name, lwip_thread_fn thread, void *arg, int stacksize, int prio);
#endif /* NO_SYS */
/* sys_init() must be called before anthing else. */
void sys_init(void)ICACHE_FLASH_ATTR;
#ifndef sys_jiffies
/** Ticks/jiffies since power up. */
u32_t sys_jiffies(void)ICACHE_FLASH_ATTR;
#endif
/** Returns the current time in milliseconds,
* may be the same as sys_jiffies or at least based on it. */
static inline u32_t sys_now(void) ICACHE_FLASH_ATTR;
static inline u32_t sys_now(void)
{
return NOW()/(TIMER_CLK_FREQ/1000);
}
/* Critical Region Protection */
/* These functions must be implemented in the sys_arch.c file.
In some implementations they can provide a more light-weight protection
mechanism than using semaphores. Otherwise semaphores can be used for
implementation */
#ifndef SYS_ARCH_PROTECT
/** SYS_LIGHTWEIGHT_PROT
* define SYS_LIGHTWEIGHT_PROT in lwipopts.h if you want inter-task protection
* for certain critical regions during buffer allocation, deallocation and memory
* allocation and deallocation.
*/
#if SYS_LIGHTWEIGHT_PROT
/** SYS_ARCH_DECL_PROTECT
* declare a protection variable. This macro will default to defining a variable of
* type sys_prot_t. If a particular port needs a different implementation, then
* this macro may be defined in sys_arch.h.
*/
#define SYS_ARCH_DECL_PROTECT(lev) sys_prot_t lev
/** SYS_ARCH_PROTECT
* Perform a "fast" protect. This could be implemented by
* disabling interrupts for an embedded system or by using a semaphore or
* mutex. The implementation should allow calling SYS_ARCH_PROTECT when
* already protected. The old protection level is returned in the variable
* "lev". This macro will default to calling the sys_arch_protect() function
* which should be implemented in sys_arch.c. If a particular port needs a
* different implementation, then this macro may be defined in sys_arch.h
*/
#define SYS_ARCH_PROTECT(lev) lev = sys_arch_protect()
/** SYS_ARCH_UNPROTECT
* Perform a "fast" set of the protection level to "lev". This could be
* implemented by setting the interrupt level to "lev" within the MACRO or by
* using a semaphore or mutex. This macro will default to calling the
* sys_arch_unprotect() function which should be implemented in
* sys_arch.c. If a particular port needs a different implementation, then
* this macro may be defined in sys_arch.h
*/
#define SYS_ARCH_UNPROTECT(lev) sys_arch_unprotect(lev)
sys_prot_t sys_arch_protect(void)ICACHE_FLASH_ATTR;
void sys_arch_unprotect(sys_prot_t pval)ICACHE_FLASH_ATTR;
#else
#define SYS_ARCH_DECL_PROTECT(lev)
#define SYS_ARCH_PROTECT(lev) lev = os_intr_lock() //fix by ives at 2014.3.24
#define SYS_ARCH_UNPROTECT(lev) lev = os_intr_unlock()
#endif /* SYS_LIGHTWEIGHT_PROT */
#endif /* SYS_ARCH_PROTECT */
/*
* Macros to set/get and increase/decrease variables in a thread-safe way.
* Use these for accessing variable that are used from more than one thread.
*/
#ifndef SYS_ARCH_INC
#define SYS_ARCH_INC(var, val) do { \
SYS_ARCH_DECL_PROTECT(old_level); \
SYS_ARCH_PROTECT(old_level); \
var += val; \
SYS_ARCH_UNPROTECT(old_level); \
} while(0)
#endif /* SYS_ARCH_INC */
#ifndef SYS_ARCH_DEC
#define SYS_ARCH_DEC(var, val) do { \
SYS_ARCH_DECL_PROTECT(old_level); \
SYS_ARCH_PROTECT(old_level); \
var -= val; \
SYS_ARCH_UNPROTECT(old_level); \
} while(0)
#endif /* SYS_ARCH_DEC */
#ifndef SYS_ARCH_GET
#define SYS_ARCH_GET(var, ret) do { \
SYS_ARCH_DECL_PROTECT(old_level); \
SYS_ARCH_PROTECT(old_level); \
ret = var; \
SYS_ARCH_UNPROTECT(old_level); \
} while(0)
#endif /* SYS_ARCH_GET */
#ifndef SYS_ARCH_SET
#define SYS_ARCH_SET(var, val) do { \
SYS_ARCH_DECL_PROTECT(old_level); \
SYS_ARCH_PROTECT(old_level); \
var = val; \
SYS_ARCH_UNPROTECT(old_level); \
} while(0)
#endif /* SYS_ARCH_SET */
#ifdef __cplusplus
}
#endif
#endif /* __LWIP_SYS_H__ */