ESPTerm - ESP8266 terminal emulator. Branches: [master] patches, [work] next release
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
espterm-firmware/user/uart_handler.c

176 lines
5.1 KiB

/**
* Higher level UART driver that makes os_printf work and supports async Rx on UART0
*/
/*
* ----------------------------------------------------------------------------
* "THE BEER-WARE LICENSE" (Revision 42):
* Jeroen Domburg <jeroen@spritesmods.com> wrote this file. As long as you retain
* this notice you can do whatever you want with this stuff. If we meet some day,
* and you think this stuff is worth it, you can buy me a beer in return.
* ----------------------------------------------------------------------------
*/
#include <esp8266.h>
#include "uart_driver.h"
#include "uart_handler.h"
// messy irq/task based UART handling below
static void uart0_rx_intr_handler(void *para);
static void uart_recvTask(os_event_t *events);
#define uart_recvTaskPrio 1
#define uart_recvTaskQueueLen 10
static os_event_t uart_recvTaskQueue[uart_recvTaskQueueLen];
/** Clear the fifos */
void ICACHE_FLASH_ATTR clear_rxtx(int uart_no)
{
SET_PERI_REG_MASK(UART_CONF0(uart_no), UART_RXFIFO_RST | UART_TXFIFO_RST);
CLEAR_PERI_REG_MASK(UART_CONF0(uart_no), UART_RXFIFO_RST | UART_TXFIFO_RST);
}
/** Configure basic UART func and pins */
void ICACHE_FLASH_ATTR UART_Init(void)
{
// U0TXD
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD);
PIN_PULLUP_DIS(PERIPHS_IO_MUX_U0TXD_U);
// U0RXD
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0RXD_U, FUNC_U0RXD);
// U1TXD (GPIO2)
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_U1TXD_BK);
// Configure the UART peripherals
UART_SetWordLength(UART0, EIGHT_BITS); // main
UART_ResetFifo(UART0);
UART_SetWordLength(UART1, EIGHT_BITS); // debug (output only)
UART_ResetFifo(UART1);
}
/** Configure Rx on UART0 */
void ICACHE_FLASH_ATTR UART_SetupAsyncReceiver(void)
{
// Start the Rx reading task
system_os_task(uart_recvTask, uart_recvTaskPrio, uart_recvTaskQueue, uart_recvTaskQueueLen);
// set handler
ETS_UART_INTR_ATTACH((void *)uart0_rx_intr_handler, &(UartDev.rcv_buff)); // the buf will be used as an arg
// fifo threshold config
uint32_t conf = ((100 & UART_RXFIFO_FULL_THRHD) << UART_RXFIFO_FULL_THRHD_S);
conf |= ((0x10 & UART_TXFIFO_EMPTY_THRHD) << UART_TXFIFO_EMPTY_THRHD_S);
// timeout config
conf |= ((0x02 & UART_RX_TOUT_THRHD) << UART_RX_TOUT_THRHD_S); // timeout threshold
conf |= UART_RX_TOUT_EN; // enable timeout
WRITE_PERI_REG(UART_CONF1(UART0), conf);
// enable TOUT and ERR irqs
SET_PERI_REG_MASK(UART_INT_ENA(UART0), UART_RXFIFO_TOUT_INT_ENA | UART_FRM_ERR_INT_ENA);
/* clear interrupt flags */
WRITE_PERI_REG(UART_INT_CLR(UART0), 0xffff);
/* enable RX interrupts */
SET_PERI_REG_MASK(UART_INT_ENA(UART0), UART_RXFIFO_FULL_INT_ENA | UART_RXFIFO_OVF_INT_ENA);
// Enable IRQ in Extensa
ETS_UART_INTR_ENABLE();
}
// ---- async receive stuff ----
void uart_rx_intr_disable(uint8 uart_no)
{
CLEAR_PERI_REG_MASK(UART_INT_ENA(uart_no), UART_RXFIFO_FULL_INT_ENA | UART_RXFIFO_TOUT_INT_ENA);
}
void uart_rx_intr_enable(uint8 uart_no)
{
SET_PERI_REG_MASK(UART_INT_ENA(uart_no), UART_RXFIFO_FULL_INT_ENA | UART_RXFIFO_TOUT_INT_ENA);
}
/**
* @brief get number of bytes in UART tx fifo
* @param UART number
*/
#define UART_GetRxFifoCount(uart_no) ((READ_PERI_REG(UART_STATUS((uart_no))) >> UART_RXFIFO_CNT_S) & UART_RXFIFO_CNT)
void ICACHE_FLASH_ATTR UART_PollRx(void)
{
uint8 fifo_len = UART_GetRxFifoCount(UART0);
for (uint8 idx = 0; idx < fifo_len; idx++) {
uint8 d_tmp = READ_PERI_REG(UART_FIFO(UART0)) & 0xFF;
UART_HandleRxByte(d_tmp);
}
}
static void ICACHE_FLASH_ATTR uart_recvTask(os_event_t *events)
{
if (events->sig == 0) {
UART_PollRx();
// clear irq flags
WRITE_PERI_REG(UART_INT_CLR(UART0), UART_RXFIFO_FULL_INT_CLR | UART_RXFIFO_TOUT_INT_CLR);
// enable rx irq again
uart_rx_intr_enable(UART0);
} else if (events->sig == 1) {
// ???
}
}
/******************************************************************************
* FunctionName : uart0_rx_intr_handler
* Description : Internal used function
* UART0 interrupt handler, add self handle code inside
* Parameters : void *para - point to ETS_UART_INTR_ATTACH's arg
* Returns : NONE
*******************************************************************************/
static void
uart0_rx_intr_handler(void *para)
{
(void)para;
uint32_t status_reg = READ_PERI_REG(UART_INT_ST(UART0));
if (status_reg & UART_FRM_ERR_INT_ST) {
// Framing Error
WRITE_PERI_REG(UART_INT_CLR(UART0), UART_FRM_ERR_INT_CLR);
}
if (status_reg & UART_RXFIFO_FULL_INT_ST) {
// RX fifo full
uart_rx_intr_disable(UART0);
WRITE_PERI_REG(UART_INT_CLR(UART0), UART_RXFIFO_FULL_INT_CLR);
// run handler
system_os_post(uart_recvTaskPrio, 0, 0); /* -> notify the polling thread */
}
if (status_reg & UART_RXFIFO_TOUT_INT_ST) {
// Fifo timeout
uart_rx_intr_disable(UART0);
WRITE_PERI_REG(UART_INT_CLR(UART0), UART_RXFIFO_TOUT_INT_CLR);
// run handler
system_os_post(uart_recvTaskPrio, 0, 0); /* -> notify the polling thread */
}
if (status_reg & UART_TXFIFO_EMPTY_INT_ST) {
CLEAR_PERI_REG_MASK(UART_INT_ENA(UART0), UART_TXFIFO_EMPTY_INT_ENA);
}
if (status_reg & UART_RXFIFO_OVF_INT_ST) {
WRITE_PERI_REG(UART_INT_CLR(UART0), UART_RXFIFO_OVF_INT_CLR);
}
}