You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
toaster-oven-bluepill/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_bus.h

1015 lines
44 KiB

/**
******************************************************************************
* @file stm32f1xx_ll_bus.h
* @author MCD Application Team
* @brief Header file of BUS LL module.
@verbatim
##### RCC Limitations #####
==============================================================================
[..]
A delay between an RCC peripheral clock enable and the effective peripheral
enabling should be taken into account in order to manage the peripheral read/write
from/to registers.
(+) This delay depends on the peripheral mapping.
(++) AHB & APB peripherals, 1 dummy read is necessary
[..]
Workarounds:
(#) For AHB & APB peripherals, a dummy read to the peripheral register has been
inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F1xx_LL_BUS_H
#define __STM32F1xx_LL_BUS_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx.h"
/** @addtogroup STM32F1xx_LL_Driver
* @{
*/
#if defined(RCC)
/** @defgroup BUS_LL BUS
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
#if defined(RCC_AHBRSTR_OTGFSRST) || defined(RCC_AHBRSTR_ETHMACRST)
#define RCC_AHBRSTR_SUPPORT
#endif /* RCC_AHBRSTR_OTGFSRST || RCC_AHBRSTR_ETHMACRST */
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
* @{
*/
/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
* @{
*/
#define LL_AHB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN
#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN
#if defined(DMA2)
#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHBENR_DMA2EN
#endif /*DMA2*/
#if defined(ETH)
#define LL_AHB1_GRP1_PERIPH_ETHMAC RCC_AHBENR_ETHMACEN
#define LL_AHB1_GRP1_PERIPH_ETHMACRX RCC_AHBENR_ETHMACRXEN
#define LL_AHB1_GRP1_PERIPH_ETHMACTX RCC_AHBENR_ETHMACTXEN
#endif /*ETH*/
#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLITFEN
#if defined(FSMC_Bank1)
#define LL_AHB1_GRP1_PERIPH_FSMC RCC_AHBENR_FSMCEN
#endif /*FSMC_Bank1*/
#if defined(USB_OTG_FS)
#define LL_AHB1_GRP1_PERIPH_OTGFS RCC_AHBENR_OTGFSEN
#endif /*USB_OTG_FS*/
#if defined(SDIO)
#define LL_AHB1_GRP1_PERIPH_SDIO RCC_AHBENR_SDIOEN
#endif /*SDIO*/
#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBENR_SRAMEN
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
* @{
*/
#define LL_APB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
#define LL_APB1_GRP1_PERIPH_BKP RCC_APB1ENR_BKPEN
#if defined(CAN1)
#define LL_APB1_GRP1_PERIPH_CAN1 RCC_APB1ENR_CAN1EN
#endif /*CAN1*/
#if defined(CAN2)
#define LL_APB1_GRP1_PERIPH_CAN2 RCC_APB1ENR_CAN2EN
#endif /*CAN2*/
#if defined(CEC)
#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN
#endif /*CEC*/
#if defined(DAC)
#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN
#endif /*DAC*/
#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN
#if defined(I2C2)
#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN
#endif /*I2C2*/
#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN
#if defined(SPI2)
#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN
#endif /*SPI2*/
#if defined(SPI3)
#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN
#endif /*SPI3*/
#if defined(TIM12)
#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1ENR_TIM12EN
#endif /*TIM12*/
#if defined(TIM13)
#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1ENR_TIM13EN
#endif /*TIM13*/
#if defined(TIM14)
#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN
#endif /*TIM14*/
#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN
#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN
#if defined(TIM4)
#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR_TIM4EN
#endif /*TIM4*/
#if defined(TIM5)
#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR_TIM5EN
#endif /*TIM5*/
#if defined(TIM6)
#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN
#endif /*TIM6*/
#if defined(TIM7)
#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN
#endif /*TIM7*/
#if defined(UART4)
#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR_UART4EN
#endif /*UART4*/
#if defined(UART5)
#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR_UART5EN
#endif /*UART5*/
#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN
#if defined(USART3)
#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN
#endif /*USART3*/
#if defined(USB)
#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR_USBEN
#endif /*USB*/
#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH
* @{
*/
#define LL_APB2_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
#define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN
#if defined(ADC2)
#define LL_APB2_GRP1_PERIPH_ADC2 RCC_APB2ENR_ADC2EN
#endif /*ADC2*/
#if defined(ADC3)
#define LL_APB2_GRP1_PERIPH_ADC3 RCC_APB2ENR_ADC3EN
#endif /*ADC3*/
#define LL_APB2_GRP1_PERIPH_AFIO RCC_APB2ENR_AFIOEN
#define LL_APB2_GRP1_PERIPH_GPIOA RCC_APB2ENR_IOPAEN
#define LL_APB2_GRP1_PERIPH_GPIOB RCC_APB2ENR_IOPBEN
#define LL_APB2_GRP1_PERIPH_GPIOC RCC_APB2ENR_IOPCEN
#define LL_APB2_GRP1_PERIPH_GPIOD RCC_APB2ENR_IOPDEN
#if defined(GPIOE)
#define LL_APB2_GRP1_PERIPH_GPIOE RCC_APB2ENR_IOPEEN
#endif /*GPIOE*/
#if defined(GPIOF)
#define LL_APB2_GRP1_PERIPH_GPIOF RCC_APB2ENR_IOPFEN
#endif /*GPIOF*/
#if defined(GPIOG)
#define LL_APB2_GRP1_PERIPH_GPIOG RCC_APB2ENR_IOPGEN
#endif /*GPIOG*/
#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
#if defined(TIM10)
#define LL_APB2_GRP1_PERIPH_TIM10 RCC_APB2ENR_TIM10EN
#endif /*TIM10*/
#if defined(TIM11)
#define LL_APB2_GRP1_PERIPH_TIM11 RCC_APB2ENR_TIM11EN
#endif /*TIM11*/
#if defined(TIM15)
#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN
#endif /*TIM15*/
#if defined(TIM16)
#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN
#endif /*TIM16*/
#if defined(TIM17)
#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN
#endif /*TIM17*/
#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
#if defined(TIM8)
#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN
#endif /*TIM8*/
#if defined(TIM9)
#define LL_APB2_GRP1_PERIPH_TIM9 RCC_APB2ENR_TIM9EN
#endif /*TIM9*/
#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
* @{
*/
/** @defgroup BUS_LL_EF_AHB1 AHB1
* @{
*/
/**
* @brief Enable AHB1 peripherals clock.
* @rmtoll AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n
* AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n
* AHBENR DMA2EN LL_AHB1_GRP1_EnableClock\n
* AHBENR ETHMACEN LL_AHB1_GRP1_EnableClock\n
* AHBENR ETHMACRXEN LL_AHB1_GRP1_EnableClock\n
* AHBENR ETHMACTXEN LL_AHB1_GRP1_EnableClock\n
* AHBENR FLITFEN LL_AHB1_GRP1_EnableClock\n
* AHBENR FSMCEN LL_AHB1_GRP1_EnableClock\n
* AHBENR OTGFSEN LL_AHB1_GRP1_EnableClock\n
* AHBENR SDIOEN LL_AHB1_GRP1_EnableClock\n
* AHBENR SRAMEN LL_AHB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_OTGFS (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_SDIO (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHBENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHBENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB1 peripheral clock is enabled or not
* @rmtoll AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR ETHMACEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR ETHMACRXEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR ETHMACTXEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR FLITFEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR FSMCEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR OTGFSEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR SDIOEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR SRAMEN LL_AHB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_OTGFS (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_SDIO (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->AHBENR, Periphs) == Periphs);
}
/**
* @brief Disable AHB1 peripherals clock.
* @rmtoll AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n
* AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n
* AHBENR DMA2EN LL_AHB1_GRP1_DisableClock\n
* AHBENR ETHMACEN LL_AHB1_GRP1_DisableClock\n
* AHBENR ETHMACRXEN LL_AHB1_GRP1_DisableClock\n
* AHBENR ETHMACTXEN LL_AHB1_GRP1_DisableClock\n
* AHBENR FLITFEN LL_AHB1_GRP1_DisableClock\n
* AHBENR FSMCEN LL_AHB1_GRP1_DisableClock\n
* AHBENR OTGFSEN LL_AHB1_GRP1_DisableClock\n
* AHBENR SDIOEN LL_AHB1_GRP1_DisableClock\n
* AHBENR SRAMEN LL_AHB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_OTGFS (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_SDIO (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHBENR, Periphs);
}
#if defined(RCC_AHBRSTR_SUPPORT)
/**
* @brief Force AHB1 peripherals reset.
* @rmtoll AHBRSTR ETHMACRST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR OTGFSRST LL_AHB1_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_ALL
* @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_OTGFS (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHBRSTR, Periphs);
}
/**
* @brief Release AHB1 peripherals reset.
* @rmtoll AHBRSTR ETHMACRST LL_AHB1_GRP1_ReleaseReset\n
* AHBRSTR OTGFSRST LL_AHB1_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_ALL
* @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_OTGFS (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHBRSTR, Periphs);
}
#endif /* RCC_AHBRSTR_SUPPORT */
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB1 APB1
* @{
*/
/**
* @brief Enable APB1 peripherals clock.
* @rmtoll APB1ENR BKPEN LL_APB1_GRP1_EnableClock\n
* APB1ENR CAN1EN LL_APB1_GRP1_EnableClock\n
* APB1ENR CAN2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR CECEN LL_APB1_GRP1_EnableClock\n
* APB1ENR DACEN LL_APB1_GRP1_EnableClock\n
* APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n
* APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR PWREN LL_APB1_GRP1_EnableClock\n
* APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR SPI3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM12EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM13EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM4EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM5EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n
* APB1ENR UART4EN LL_APB1_GRP1_EnableClock\n
* APB1ENR UART5EN LL_APB1_GRP1_EnableClock\n
* APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR USBEN LL_APB1_GRP1_EnableClock\n
* APB1ENR WWDGEN LL_APB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_BKP
* @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB1 peripheral clock is enabled or not
* @rmtoll APB1ENR BKPEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR CAN1EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR CAN2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR UART4EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR UART5EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR USBEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_BKP
* @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs);
}
/**
* @brief Disable APB1 peripherals clock.
* @rmtoll APB1ENR BKPEN LL_APB1_GRP1_DisableClock\n
* APB1ENR CAN1EN LL_APB1_GRP1_DisableClock\n
* APB1ENR CAN2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR CECEN LL_APB1_GRP1_DisableClock\n
* APB1ENR DACEN LL_APB1_GRP1_DisableClock\n
* APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n
* APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR PWREN LL_APB1_GRP1_DisableClock\n
* APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR SPI3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM12EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM13EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM4EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM5EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n
* APB1ENR UART4EN LL_APB1_GRP1_DisableClock\n
* APB1ENR UART5EN LL_APB1_GRP1_DisableClock\n
* APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR USBEN LL_APB1_GRP1_DisableClock\n
* APB1ENR WWDGEN LL_APB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_BKP
* @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1ENR, Periphs);
}
/**
* @brief Force APB1 peripherals reset.
* @rmtoll APB1RSTR BKPRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR CAN1RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR CAN2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR CECRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR SPI3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM12RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM13RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM4RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM5RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR UART4RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR UART5RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR USBRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_ALL
* @arg @ref LL_APB1_GRP1_PERIPH_BKP
* @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB1RSTR, Periphs);
}
/**
* @brief Release APB1 peripherals reset.
* @rmtoll APB1RSTR BKPRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR CAN1RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR CAN2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR UART4RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR UART5RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR USBRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_ALL
* @arg @ref LL_APB1_GRP1_PERIPH_BKP
* @arg @ref LL_APB1_GRP1_PERIPH_CAN1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM12 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM13 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1RSTR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB2 APB2
* @{
*/
/**
* @brief Enable APB2 peripherals clock.
* @rmtoll APB2ENR ADC1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR ADC2EN LL_APB2_GRP1_EnableClock\n
* APB2ENR ADC3EN LL_APB2_GRP1_EnableClock\n
* APB2ENR AFIOEN LL_APB2_GRP1_EnableClock\n
* APB2ENR IOPAEN LL_APB2_GRP1_EnableClock\n
* APB2ENR IOPBEN LL_APB2_GRP1_EnableClock\n
* APB2ENR IOPCEN LL_APB2_GRP1_EnableClock\n
* APB2ENR IOPDEN LL_APB2_GRP1_EnableClock\n
* APB2ENR IOPEEN LL_APB2_GRP1_EnableClock\n
* APB2ENR IOPFEN LL_APB2_GRP1_EnableClock\n
* APB2ENR IOPGEN LL_APB2_GRP1_EnableClock\n
* APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM10EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM11EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n
* APB2ENR TIM9EN LL_APB2_GRP1_EnableClock\n
* APB2ENR USART1EN LL_APB2_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_ADC1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_AFIO
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOF (*)
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOG (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM11 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB2 peripheral clock is enabled or not
* @rmtoll APB2ENR ADC1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR ADC2EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR ADC3EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR AFIOEN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR IOPAEN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR IOPBEN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR IOPCEN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR IOPDEN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR IOPEEN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR IOPFEN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR IOPGEN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM10EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM11EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR TIM9EN LL_APB2_GRP1_IsEnabledClock\n
* APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_ADC1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_AFIO
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOF (*)
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOG (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM11 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs);
}
/**
* @brief Disable APB2 peripherals clock.
* @rmtoll APB2ENR ADC1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR ADC2EN LL_APB2_GRP1_DisableClock\n
* APB2ENR ADC3EN LL_APB2_GRP1_DisableClock\n
* APB2ENR AFIOEN LL_APB2_GRP1_DisableClock\n
* APB2ENR IOPAEN LL_APB2_GRP1_DisableClock\n
* APB2ENR IOPBEN LL_APB2_GRP1_DisableClock\n
* APB2ENR IOPCEN LL_APB2_GRP1_DisableClock\n
* APB2ENR IOPDEN LL_APB2_GRP1_DisableClock\n
* APB2ENR IOPEEN LL_APB2_GRP1_DisableClock\n
* APB2ENR IOPFEN LL_APB2_GRP1_DisableClock\n
* APB2ENR IOPGEN LL_APB2_GRP1_DisableClock\n
* APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM10EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM11EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n
* APB2ENR TIM9EN LL_APB2_GRP1_DisableClock\n
* APB2ENR USART1EN LL_APB2_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_ADC1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_AFIO
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOF (*)
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOG (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM11 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2ENR, Periphs);
}
/**
* @brief Force APB2 peripherals reset.
* @rmtoll APB2RSTR ADC1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR ADC2RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR ADC3RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR AFIORST LL_APB2_GRP1_ForceReset\n
* APB2RSTR IOPARST LL_APB2_GRP1_ForceReset\n
* APB2RSTR IOPBRST LL_APB2_GRP1_ForceReset\n
* APB2RSTR IOPCRST LL_APB2_GRP1_ForceReset\n
* APB2RSTR IOPDRST LL_APB2_GRP1_ForceReset\n
* APB2RSTR IOPERST LL_APB2_GRP1_ForceReset\n
* APB2RSTR IOPFRST LL_APB2_GRP1_ForceReset\n
* APB2RSTR IOPGRST LL_APB2_GRP1_ForceReset\n
* APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM10RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM11RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR TIM9RST LL_APB2_GRP1_ForceReset\n
* APB2RSTR USART1RST LL_APB2_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_ALL
* @arg @ref LL_APB2_GRP1_PERIPH_ADC1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_AFIO
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOF (*)
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOG (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM11 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @brief Release APB2 peripherals reset.
* @rmtoll APB2RSTR ADC1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR ADC2RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR ADC3RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR AFIORST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR IOPARST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR IOPBRST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR IOPCRST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR IOPDRST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR IOPERST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR IOPFRST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR IOPGRST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM10RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM11RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM15RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM17RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR TIM9RST LL_APB2_GRP1_ReleaseReset\n
* APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB2_GRP1_PERIPH_ALL
* @arg @ref LL_APB2_GRP1_PERIPH_ADC1
* @arg @ref LL_APB2_GRP1_PERIPH_ADC2 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_ADC3 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_AFIO
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOA
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOB
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOC
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOD
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOF (*)
* @arg @ref LL_APB2_GRP1_PERIPH_GPIOG (*)
* @arg @ref LL_APB2_GRP1_PERIPH_SPI1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM10 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM11 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM15 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM16 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM1
* @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_TIM9 (*)
* @arg @ref LL_APB2_GRP1_PERIPH_USART1
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined(RCC) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F1xx_LL_BUS_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/