You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
144 lines
7.2 KiB
144 lines
7.2 KiB
HowTo DSP_Lib_TestSuite 16.12.2016
|
|
=======================================
|
|
|
|
This file describes the folder structure, content, prerequisites and instructions to validate the
|
|
build of the CMSIS-DSP library. This is done by processing input data sets using the DSP Library
|
|
functions executing on a target simulator or hardware. The output data sets are then compared
|
|
with the reference data set produced by unoptimized DSP functions and a Signal to Noise Ratio (SNR)
|
|
is computed. If the SNR is below a defined threshold the test is considered "passed".
|
|
|
|
|
|
Folder structure
|
|
----------------
|
|
.\DSP_Lib_TestSuite Batch files for building the reference libraries and running the tests.
|
|
.\DSP_Lib_TestSuite\Common
|
|
.\DSP_Lib_TestSuite\Common\inc DSP_Lib test include files
|
|
.\DSP_Lib_TestSuite\Common\JTest JTEST Test Framework + INI files for uVision
|
|
.\DSP_Lib_TestSuite\Common\platform ARM/GCC device startup/system files
|
|
.\DSP_Lib_TestSuite\Common\src DSP_Lib test source files
|
|
.\DSP_Lib_TestSuite\DspLibTest_FVP ARM/GCC DSP_Lib test projects for Fixed Virtual Platforms
|
|
.\DSP_Lib_TestSuite\DspLibTest_MPS2 ARM/GCC DSP_Lib test projects for MPS2
|
|
.\DSP_Lib_TestSuite\DspLibTest_Simulator ARM/GCC DSP_Lib test projects for uVision simulator
|
|
.\DSP_Lib_TestSuite\RefLibs ARM/GCC DSP_Lib reference libraries (and projects)
|
|
|
|
|
|
|
|
Prerequisites
|
|
--------------
|
|
- Python (running on Windows). Tested with ActivePython 2.7.8.10.
|
|
- Keil MDK-ARM (tested with MDK-ARM 5.22: http://www2.keil.com/mdk5)
|
|
- ULINKpro debug adapter (http://www2.keil.com/mdk5/ulink)
|
|
- MPS2 (Cortex-M Prototyping System:https://www.arm.com/products/tools/development-boards/versatile-express/cortex-m-prototyping-system.php)
|
|
- CMSIS 5.0.0 (https://github.com/ARM-software/CMSIS_5/releases/tag/5.0.0)
|
|
|
|
|
|
Setup
|
|
------
|
|
- Copy DSP_Lib_TestSuite to the CMSIS installation/pack folder.
|
|
...
|
|
.\Keil_v5\ARM\PACK\ARM\CMSIS\DSP_Lib
|
|
.\Keil_v5\ARM\PACK\ARM\CMSIS\DSP_Lib_TestSuite <- location of DSP_Lib_TestSuite
|
|
.\Keil_v5\ARM\PACK\ARM\CMSIS\Include
|
|
...
|
|
|
|
- remove 'read-only' tag from folder ./CMSIS/Lib
|
|
(required for rebuild of the DSP_Lib libraries)
|
|
|
|
- open a Windows command window in folder .\CMSIS\DSP_Lib_TestSuite.
|
|
|
|
|
|
|
|
How to run the tests
|
|
---------------------
|
|
|
|
a) build the DSP_Lib libraries:
|
|
- batch file: buildDspLibs.bat
|
|
Note: only require if the DSP_Lib source code got updated or the desired configuration is missing
|
|
buildDspLibs.bat overwrites the prebuild libraries in .\CMSIS\Lib.
|
|
Log files of the build process are generated in folder .\CMSIS\DSP_Lib/[ARM|GCC]
|
|
- run: buildDspLibs.bat in a Windows command window in folder ./CMSIS/DSP_Lib_TestSuite
|
|
buildDspLibs ARM -> builds the ARMCC libraries
|
|
buildDspLibs GCC -> builds the GCC libraries
|
|
|
|
b) build the reference libraries:
|
|
- batch file: buildRefLibs.bat
|
|
|
|
Log files of the build process are generated in folder .\CMSIS\DSP_Lib_TestSuite\RefLibs/[ARM|GCC]
|
|
- run: buildRefLibs.bat in a Windows command window in folder .\CMSIS\DSP_Lib_TestSuite
|
|
buildRefLibs ARM -> builds the ARMCC reference libraries
|
|
buildRefLibs GCC -> builds the GCC reference libraries
|
|
|
|
c) running an individual test using uVision (MDK-ARM):
|
|
- batch file: runTest.bat
|
|
- run: runTest.bat in a Windows command window in folder .\CMSIS\DSP_Lib_TestSuite
|
|
runTest -> prints usage information
|
|
e.g. runTest ARM cortexM4lf Simulator -> runs the test for toolchain ARM, Cortex-M4 littel endian with FPU, uVision Simulator.
|
|
|
|
Tests running on MPS2 requires additional steps to setup. See section 'MPS2'.
|
|
|
|
d) parsing the test output log file
|
|
- script: parseLog.py
|
|
- run: parseLog.py python script in a Windows command window in folder .\CMSIS\DSP_Lib_TestSuite
|
|
command line options should match the invocation of the runTest executed before.
|
|
e.g: runTest ARM cortexM4lf Simulator -> python parseLog.py ARM cortexM4lf Simulator
|
|
|
|
- check the test log
|
|
depending on your test parameters change into the required folder
|
|
.\DSP_Lib_TestSuite\DspLibTest_[FVP|MPS2|Simulator]\[ARM|GCC]\Logs
|
|
the folder will contain the following files (e.g. for a 'runTest') :
|
|
DspLibTest_Simulator.log raw result of the last test run.
|
|
DspLibTest_Simulator_cortexM4lf.log raw result of a cortexM4lf test run
|
|
DspLibTest_Simulator_cortexM4lf_build.log build result of cortexM4lf test
|
|
DspLibTest_Simulator_cortexM4lf_parsed.log parsed log of raw result of a cortexM4lf test run
|
|
DspLibTest_Simulator_cortexM4lf_time.log log how long the test took (some tests e.g. M0 take really a long time!).
|
|
'runTest' produces files of the format: DspLibTest_<test>_<core>...
|
|
|
|
|
|
Differences between the tests for FVP, MPS2, Simulator
|
|
------------------------------------------------------
|
|
- all tests are identical except for:
|
|
'Simulator' uses uVision with uVision simulator and generates also code coverage information
|
|
can be used for little/big endian tests
|
|
! do not use 'Simulator' for M7 with FPU -> no uVision simulation available.
|
|
! do not use 'Simulator' for ARMv8-M devices -> no uVision simulation available.
|
|
'MPS2' uses uVision with ULINKpro debugger and MPS2. No code coverage information is generated.
|
|
can be used for little endian only (because of the lack of MPS2 FPGA images).
|
|
'FVP' uses uVision with Models debugger. No code coverage information is generated.
|
|
can be used for little/big endian tests.
|
|
! config files must be prepared.
|
|
! uVision target for big endianess are not yet prepared.
|
|
|
|
|
|
Setup 'MPS2'
|
|
-------------
|
|
- load the appropriate FPGA image to the MPS2 board matching the CPU of the test builds prior to running the test
|
|
- check if ULINKpro can connect with the configured debug connection (JTAG or SWD) as this must
|
|
match the protocol implemented in the FPGA image.
|
|
|
|
|
|
How to select tests for "run all tests"
|
|
----------------------------------------
|
|
- edit .\CMSIS\DSP_Lib_TestSuite\Common\src\all_tests.c
|
|
comment out all unwanted test groups.
|
|
e.g. // JTEST_GROUP_CALL(complex_math_tests);
|
|
|
|
- edit .\CMSIS\DSP_Lib_TestSuite\Common\src\<test group>/<test group>_group.c
|
|
comment out all unwanted sub test groups.
|
|
e.g. file .\DSP_Lib_TestSuite\Common\src\basic_math_tests\basic_math_test_group.c -> // JTEST_GROUP_CALL(abs_tests);
|
|
|
|
- edit .\CMSIS\DSP_Lib_TestSuite\Common\src\<test group>/<test>_tests.c
|
|
comment out all unwanted tests.
|
|
e.g. file .\DSP_Lib_TestSuite\Common\src\basic_math_tests\abs_tests.c -> // JTEST_TEST_CALL(arm_abs_f32_test);
|
|
|
|
|
|
Notes
|
|
-----
|
|
- How to use ARM Clang (ARM Compiler 6):
|
|
in uVision 'Options for Target' tab you can select which compiler to use
|
|
by default uVision uses ARMCC V5 for Cortex-M devices and ARMCLANG V6 only for ARMv8M.
|
|
Only ARMv8M cores have been tested using ARMCLANG
|
|
|
|
- test data used for the tests is used as provided by DSP Concepts.
|
|
|
|
- some tests run for a very long time before they finish. This is expected
|
|
|
|
|