You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
270 lines
11 KiB
270 lines
11 KiB
/******************************************************************************
|
|
* @file mpu_armv7.h
|
|
* @brief CMSIS MPU API for Armv7-M MPU
|
|
* @version V5.0.4
|
|
* @date 10. January 2018
|
|
******************************************************************************/
|
|
/*
|
|
* Copyright (c) 2017-2018 Arm Limited. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the License); you may
|
|
* not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*/
|
|
|
|
#if defined ( __ICCARM__ )
|
|
#pragma system_include /* treat file as system include file for MISRA check */
|
|
#elif defined (__clang__)
|
|
#pragma clang system_header /* treat file as system include file */
|
|
#endif
|
|
|
|
#ifndef ARM_MPU_ARMV7_H
|
|
#define ARM_MPU_ARMV7_H
|
|
|
|
#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes
|
|
#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes
|
|
#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes
|
|
#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes
|
|
#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes
|
|
#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte
|
|
#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes
|
|
#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes
|
|
#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes
|
|
#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes
|
|
#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes
|
|
#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes
|
|
#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes
|
|
#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes
|
|
#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes
|
|
#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte
|
|
#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes
|
|
#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes
|
|
#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes
|
|
#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes
|
|
#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes
|
|
#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes
|
|
#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes
|
|
#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes
|
|
#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes
|
|
#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte
|
|
#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes
|
|
#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes
|
|
|
|
#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access
|
|
#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only
|
|
#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only
|
|
#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access
|
|
#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only
|
|
#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access
|
|
|
|
/** MPU Region Base Address Register Value
|
|
*
|
|
* \param Region The region to be configured, number 0 to 15.
|
|
* \param BaseAddress The base address for the region.
|
|
*/
|
|
#define ARM_MPU_RBAR(Region, BaseAddress) \
|
|
(((BaseAddress) & MPU_RBAR_ADDR_Msk) | \
|
|
((Region) & MPU_RBAR_REGION_Msk) | \
|
|
(MPU_RBAR_VALID_Msk))
|
|
|
|
/**
|
|
* MPU Memory Access Attributes
|
|
*
|
|
* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
|
|
* \param IsShareable Region is shareable between multiple bus masters.
|
|
* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache.
|
|
* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
|
|
*/
|
|
#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \
|
|
((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \
|
|
(((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \
|
|
(((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \
|
|
(((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk))
|
|
|
|
/**
|
|
* MPU Region Attribute and Size Register Value
|
|
*
|
|
* \param DisableExec Instruction access disable bit, 1= disable instruction fetches.
|
|
* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode.
|
|
* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_.
|
|
* \param SubRegionDisable Sub-region disable field.
|
|
* \param Size Region size of the region to be configured, for example 4K, 8K.
|
|
*/
|
|
#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \
|
|
((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \
|
|
(((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \
|
|
(((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk)))
|
|
|
|
/**
|
|
* MPU Region Attribute and Size Register Value
|
|
*
|
|
* \param DisableExec Instruction access disable bit, 1= disable instruction fetches.
|
|
* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode.
|
|
* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
|
|
* \param IsShareable Region is shareable between multiple bus masters.
|
|
* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache.
|
|
* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
|
|
* \param SubRegionDisable Sub-region disable field.
|
|
* \param Size Region size of the region to be configured, for example 4K, 8K.
|
|
*/
|
|
#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \
|
|
ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size)
|
|
|
|
/**
|
|
* MPU Memory Access Attribute for strongly ordered memory.
|
|
* - TEX: 000b
|
|
* - Shareable
|
|
* - Non-cacheable
|
|
* - Non-bufferable
|
|
*/
|
|
#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U)
|
|
|
|
/**
|
|
* MPU Memory Access Attribute for device memory.
|
|
* - TEX: 000b (if non-shareable) or 010b (if shareable)
|
|
* - Shareable or non-shareable
|
|
* - Non-cacheable
|
|
* - Bufferable (if shareable) or non-bufferable (if non-shareable)
|
|
*
|
|
* \param IsShareable Configures the device memory as shareable or non-shareable.
|
|
*/
|
|
#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U))
|
|
|
|
/**
|
|
* MPU Memory Access Attribute for normal memory.
|
|
* - TEX: 1BBb (reflecting outer cacheability rules)
|
|
* - Shareable or non-shareable
|
|
* - Cacheable or non-cacheable (reflecting inner cacheability rules)
|
|
* - Bufferable or non-bufferable (reflecting inner cacheability rules)
|
|
*
|
|
* \param OuterCp Configures the outer cache policy.
|
|
* \param InnerCp Configures the inner cache policy.
|
|
* \param IsShareable Configures the memory as shareable or non-shareable.
|
|
*/
|
|
#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U))
|
|
|
|
/**
|
|
* MPU Memory Access Attribute non-cacheable policy.
|
|
*/
|
|
#define ARM_MPU_CACHEP_NOCACHE 0U
|
|
|
|
/**
|
|
* MPU Memory Access Attribute write-back, write and read allocate policy.
|
|
*/
|
|
#define ARM_MPU_CACHEP_WB_WRA 1U
|
|
|
|
/**
|
|
* MPU Memory Access Attribute write-through, no write allocate policy.
|
|
*/
|
|
#define ARM_MPU_CACHEP_WT_NWA 2U
|
|
|
|
/**
|
|
* MPU Memory Access Attribute write-back, no write allocate policy.
|
|
*/
|
|
#define ARM_MPU_CACHEP_WB_NWA 3U
|
|
|
|
|
|
/**
|
|
* Struct for a single MPU Region
|
|
*/
|
|
typedef struct {
|
|
uint32_t RBAR; //!< The region base address register value (RBAR)
|
|
uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR
|
|
} ARM_MPU_Region_t;
|
|
|
|
/** Enable the MPU.
|
|
* \param MPU_Control Default access permissions for unconfigured regions.
|
|
*/
|
|
__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
|
|
{
|
|
__DSB();
|
|
__ISB();
|
|
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
|
|
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
|
|
SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
|
|
#endif
|
|
}
|
|
|
|
/** Disable the MPU.
|
|
*/
|
|
__STATIC_INLINE void ARM_MPU_Disable(void)
|
|
{
|
|
__DSB();
|
|
__ISB();
|
|
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
|
|
SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
|
|
#endif
|
|
MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk;
|
|
}
|
|
|
|
/** Clear and disable the given MPU region.
|
|
* \param rnr Region number to be cleared.
|
|
*/
|
|
__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
|
|
{
|
|
MPU->RNR = rnr;
|
|
MPU->RASR = 0U;
|
|
}
|
|
|
|
/** Configure an MPU region.
|
|
* \param rbar Value for RBAR register.
|
|
* \param rsar Value for RSAR register.
|
|
*/
|
|
__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr)
|
|
{
|
|
MPU->RBAR = rbar;
|
|
MPU->RASR = rasr;
|
|
}
|
|
|
|
/** Configure the given MPU region.
|
|
* \param rnr Region number to be configured.
|
|
* \param rbar Value for RBAR register.
|
|
* \param rsar Value for RSAR register.
|
|
*/
|
|
__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr)
|
|
{
|
|
MPU->RNR = rnr;
|
|
MPU->RBAR = rbar;
|
|
MPU->RASR = rasr;
|
|
}
|
|
|
|
/** Memcopy with strictly ordered memory access, e.g. for register targets.
|
|
* \param dst Destination data is copied to.
|
|
* \param src Source data is copied from.
|
|
* \param len Amount of data words to be copied.
|
|
*/
|
|
__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
|
|
{
|
|
uint32_t i;
|
|
for (i = 0U; i < len; ++i)
|
|
{
|
|
dst[i] = src[i];
|
|
}
|
|
}
|
|
|
|
/** Load the given number of MPU regions from a table.
|
|
* \param table Pointer to the MPU configuration table.
|
|
* \param cnt Amount of regions to be configured.
|
|
*/
|
|
__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt)
|
|
{
|
|
const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
|
|
while (cnt > MPU_TYPE_RALIASES) {
|
|
orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize);
|
|
table += MPU_TYPE_RALIASES;
|
|
cnt -= MPU_TYPE_RALIASES;
|
|
}
|
|
orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize);
|
|
}
|
|
|
|
#endif
|
|
|