electro
/
toaster-oven-bluepill
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

update cube project

Browse Source
fake-chip
Ondřej Hruška 2 years ago
parent e576d5847c
commit 9bbed9f1c4
9 changed files with 297 additions and 68 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 80
      BluepillTrouba.ioc
  2. 132
      BluepillTrouba.txt
  3. 26
      Core/Inc/main.h
  4. 3
      Core/Inc/tim.h
  5. 20
      Core/Src/gpio.c
  6. 1
      Core/Src/main.c
  7. 101
      Core/Src/tim.c
  8. 2
      Makefile
  9. BIN
      pt100.gnumeric

80
BluepillTrouba.ioc
Unescape View File

@ -42,8 +42,9 @@ Mcu.CPN=STM32F103CBT6
Mcu.Family=STM32F1
Mcu.IP0=ADC1
Mcu.IP1=DMA
Mcu.IP10=TIM4
Mcu.IP11=USART1
Mcu.IP10=TIM3
Mcu.IP11=TIM4
Mcu.IP12=USART1
Mcu.IP2=FREERTOS
Mcu.IP3=IWDG
Mcu.IP4=NVIC
@ -52,23 +53,23 @@ Mcu.IP6=RTC
Mcu.IP7=SPI1
Mcu.IP8=SYS
Mcu.IP9=TIM2
Mcu.IPNb=12
Mcu.IPNb=13
Mcu.Name=STM32F103C(8-B)Tx
Mcu.Package=LQFP48
Mcu.Pin0=PC13-TAMPER-RTC
Mcu.Pin1=PC14-OSC32_IN
Mcu.Pin10=PA6
Mcu.Pin11=PA7
Mcu.Pin12=PB11
Mcu.Pin10=PB0
Mcu.Pin11=PB1
Mcu.Pin12=PB10
Mcu.Pin13=PA9
Mcu.Pin14=PA10
Mcu.Pin15=PA13
Mcu.Pin16=PA14
Mcu.Pin17=PA15
Mcu.Pin18=PB5
Mcu.Pin19=PB6
Mcu.Pin18=PB6
Mcu.Pin19=PB7
Mcu.Pin2=PC15-OSC32_OUT
Mcu.Pin20=PB7
Mcu.Pin20=PB8
Mcu.Pin21=VP_ADC1_TempSens_Input
Mcu.Pin22=VP_ADC1_Vref_Input
Mcu.Pin23=VP_FREERTOS_VS_CMSIS_V2
@ -77,14 +78,15 @@ Mcu.Pin25=VP_RTC_VS_RTC_Activate
Mcu.Pin26=VP_RTC_No_RTC_Output
Mcu.Pin27=VP_SYS_VS_tim1
Mcu.Pin28=VP_TIM2_VS_ClockSourceINT
Mcu.Pin29=VP_TIM3_VS_ClockSourceINT
Mcu.Pin3=PD0-OSC_IN
Mcu.Pin4=PD1-OSC_OUT
Mcu.Pin5=PA0-WKUP
Mcu.Pin6=PA1
Mcu.Pin7=PA3
Mcu.Pin8=PA4
Mcu.Pin9=PA5
Mcu.PinsNb=29
Mcu.Pin7=PA5
Mcu.Pin8=PA6
Mcu.Pin9=PA7
Mcu.PinsNb=30
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F103CBTx
@ -128,45 +130,43 @@ PA15.GPIOParameters=GPIO_Speed,GPIO_Label
PA15.GPIO_Label=BUZZER
PA15.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
PA15.Signal=S_TIM2_CH1_ETR
PA3.GPIOParameters=GPIO_Label
PA3.GPIO_Label=OLED_RST
PA3.Locked=true
PA3.Signal=GPIO_Output
PA4.GPIOParameters=GPIO_Label
PA4.GPIO_Label=OLED_DC
PA4.Locked=true
PA4.Signal=GPIO_Output
PA5.GPIOParameters=GPIO_Label
PA5.GPIO_Label=OLED_SCLK
PA5.Mode=TX_Only_Simplex_Unidirect_Master
PA5.Signal=SPI1_SCK
PA6.GPIOParameters=GPIO_Label
PA6.GPIO_Label=OLED_CS
PA6.Locked=true
PA6.Signal=GPIO_Output
PA6.GPIO_Label=HEATER
PA6.Signal=S_TIM3_CH1
PA7.GPIOParameters=GPIO_Label
PA7.GPIO_Label=OLED_MOSI
PA7.Mode=TX_Only_Simplex_Unidirect_Master
PA7.Signal=SPI1_MOSI
PA9.Mode=Asynchronous
PA9.Signal=USART1_TX
PB11.GPIOParameters=GPIO_Label
PB11.GPIO_Label=HEATER
PB11.Locked=true
PB11.Signal=GPIO_Output
PB5.GPIOParameters=GPIO_PuPd,GPIO_Label
PB5.GPIO_Label=KNOB_PUSH
PB5.GPIO_PuPd=GPIO_PULLUP
PB5.Locked=true
PB5.Signal=GPIO_Input
PB0.GPIOParameters=GPIO_Label
PB0.GPIO_Label=OLED_CS
PB0.Locked=true
PB0.Signal=GPIO_Output
PB1.GPIOParameters=GPIO_Label
PB1.GPIO_Label=OLED_DC
PB1.Locked=true
PB1.Signal=GPIO_Output
PB10.GPIOParameters=GPIO_Label
PB10.GPIO_Label=OLED_RST
PB10.Locked=true
PB10.Signal=GPIO_Output
PB6.GPIOParameters=GPIO_PuPd,GPIO_Label
PB6.GPIO_Label=KNOB_B
PB6.GPIO_Label=KNOB_A
PB6.GPIO_PuPd=GPIO_PULLUP
PB6.Signal=S_TIM4_CH1
PB7.GPIOParameters=GPIO_PuPd,GPIO_Label
PB7.GPIO_Label=KNOB_A
PB7.GPIO_Label=KNOB_B
PB7.GPIO_PuPd=GPIO_PULLUP
PB7.Signal=S_TIM4_CH2
PB8.GPIOParameters=GPIO_Label
PB8.GPIO_Label=KNOB_PUSH
PB8.Locked=true
PB8.Signal=GPIO_Input
PC13-TAMPER-RTC.GPIOParameters=GPIO_Label
PC13-TAMPER-RTC.GPIO_Label=LED
PC13-TAMPER-RTC.Locked=true
@ -207,7 +207,7 @@ ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=Makefile
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_IWDG_Init-IWDG-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true,5-MX_ADC1_Init-ADC1-false-HAL-true,6-MX_SPI1_Init-SPI1-false-HAL-true,7-MX_DMA_Init-DMA-false-HAL-true,8-MX_TIM4_Init-TIM4-false-HAL-true,9-MX_TIM2_Init-TIM2-false-HAL-true
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_IWDG_Init-IWDG-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true,5-MX_ADC1_Init-ADC1-false-HAL-true,6-MX_SPI1_Init-SPI1-false-HAL-true,7-MX_DMA_Init-DMA-false-HAL-true,8-MX_TIM4_Init-TIM4-false-HAL-true,9-MX_TIM2_Init-TIM2-false-HAL-true,10-MX_RTC_Init-RTC-false-HAL-true
RCC.ADCFreqValue=2250000
RCC.ADCPresc=RCC_ADCPCLK2_DIV8
RCC.AHBFreq_Value=72000000
@ -239,6 +239,8 @@ SH.ADCx_IN1.0=ADC1_IN1,IN1
SH.ADCx_IN1.ConfNb=1
SH.S_TIM2_CH1_ETR.0=TIM2_CH1,PWM Generation1 CH1
SH.S_TIM2_CH1_ETR.ConfNb=1
SH.S_TIM3_CH1.0=TIM3_CH1,PWM Generation1 CH1
SH.S_TIM3_CH1.ConfNb=1
SH.S_TIM4_CH1.0=TIM4_CH1,Encoder_Interface
SH.S_TIM4_CH1.ConfNb=1
SH.S_TIM4_CH2.0=TIM4_CH2,Encoder_Interface
@ -252,6 +254,10 @@ SPI1.VirtualType=VM_MASTER
TIM2.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
TIM2.IPParameters=Channel-PWM Generation1 CH1,Prescaler
TIM2.Prescaler=2
TIM3.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
TIM3.IPParameters=Channel-PWM Generation1 CH1,Prescaler,Pulse-PWM Generation1 CH1
TIM3.Prescaler=2
TIM3.Pulse-PWM\ Generation1\ CH1=32768
TIM4.IC2Filter=15
TIM4.IPParameters=IC2Filter,Prescaler
TIM4.Prescaler=0
@ -274,4 +280,6 @@ VP_SYS_VS_tim1.Mode=TIM1
VP_SYS_VS_tim1.Signal=SYS_VS_tim1
VP_TIM2_VS_ClockSourceINT.Mode=Internal
VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
VP_TIM3_VS_ClockSourceINT.Mode=Internal
VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT
board=custom

132
BluepillTrouba.txt
Unescape View File

@ -0,0 +1,132 @@
Configuration BluepillTrouba
STM32CubeMX 6.5.0
Date 03/04/2023
MCU STM32F103CBTx
PERIPHERALS MODES FUNCTIONS PINS
ADC1 IN0 ADC1_IN0 PA0-WKUP
ADC1 IN1 ADC1_IN1 PA1
ADC1 Single-ended ADC1_TempSens_Input VP_ADC1_TempSens_Input
ADC1 Vrefint Channel ADC1_Vref_Input VP_ADC1_Vref_Input
RCC Crystal/Ceramic Resonator RCC_OSC_IN PD0-OSC_IN
RCC Crystal/Ceramic Resonator RCC_OSC_OUT PD1-OSC_OUT
RCC Crystal/Ceramic Resonator RCC_OSC32_IN PC14-OSC32_IN
RCC Crystal/Ceramic Resonator RCC_OSC32_OUT PC15-OSC32_OUT
RTC Activate Clock Source RTC_VS_RTC_Activate VP_RTC_VS_RTC_Activate
RTC No RTC Output RTC_No_RTC_Output VP_RTC_No_RTC_Output
SPI1 Transmit Only Master SPI1_MOSI PA7
SPI1 Transmit Only Master SPI1_SCK PA5
SYS Serial Wire SYS_JTCK-SWCLK PA14
SYS Serial Wire SYS_JTMS-SWDIO PA13
SYS TIM1 SYS_VS_tim1 VP_SYS_VS_tim1
TIM2 Internal Clock TIM2_VS_ClockSourceINT VP_TIM2_VS_ClockSourceINT
TIM2 PWM Generation CH1 TIM2_CH1 PA15
TIM3 Internal Clock TIM3_VS_ClockSourceINT VP_TIM3_VS_ClockSourceINT
TIM3 PWM Generation CH1 TIM3_CH1 PA6
TIM4 Encoder Mode TIM4_CH1 PB6
TIM4 Encoder Mode TIM4_CH2 PB7
USART1 Asynchronous USART1_RX PA10
USART1 Asynchronous USART1_TX PA9
Pin Nb PINs FUNCTIONs LABELs
2 PC13-TAMPER-RTC GPIO_Output LED
3 PC14-OSC32_IN RCC_OSC32_IN
4 PC15-OSC32_OUT RCC_OSC32_OUT
5 PD0-OSC_IN RCC_OSC_IN
6 PD1-OSC_OUT RCC_OSC_OUT
10 PA0-WKUP ADC1_IN0 ADC_PT100
11 PA1 ADC1_IN1 ADC_SENSR
15 PA5 SPI1_SCK OLED_SCLK
16 PA6 TIM3_CH1 HEATER
17 PA7 SPI1_MOSI OLED_MOSI
18 PB0 GPIO_Output OLED_CS
19 PB1 GPIO_Output OLED_DC
21 PB10 GPIO_Output OLED_RST
30 PA9 USART1_TX
31 PA10 USART1_RX
34 PA13 SYS_JTMS-SWDIO
37 PA14 SYS_JTCK-SWCLK
38 PA15 TIM2_CH1 BUZZER
42 PB6 TIM4_CH1 KNOB_A
43 PB7 TIM4_CH2 KNOB_B
45 PB8 GPIO_Input KNOB_PUSH
PERIPHERALS MODES FUNCTIONS PINS
ADC1 IN0 ADC1_IN0 PA0-WKUP
ADC1 IN1 ADC1_IN1 PA1
ADC1 Single-ended ADC1_TempSens_Input VP_ADC1_TempSens_Input
ADC1 Vrefint Channel ADC1_Vref_Input VP_ADC1_Vref_Input
RCC Crystal/Ceramic Resonator RCC_OSC_IN PD0-OSC_IN
RCC Crystal/Ceramic Resonator RCC_OSC_OUT PD1-OSC_OUT
RCC Crystal/Ceramic Resonator RCC_OSC32_IN PC14-OSC32_IN
RCC Crystal/Ceramic Resonator RCC_OSC32_OUT PC15-OSC32_OUT
RTC Activate Clock Source RTC_VS_RTC_Activate VP_RTC_VS_RTC_Activate
RTC No RTC Output RTC_No_RTC_Output VP_RTC_No_RTC_Output
SPI1 Transmit Only Master SPI1_MOSI PA7
SPI1 Transmit Only Master SPI1_SCK PA5
SYS Serial Wire SYS_JTCK-SWCLK PA14
SYS Serial Wire SYS_JTMS-SWDIO PA13
SYS TIM1 SYS_VS_tim1 VP_SYS_VS_tim1
TIM2 Internal Clock TIM2_VS_ClockSourceINT VP_TIM2_VS_ClockSourceINT
TIM2 PWM Generation CH1 TIM2_CH1 PA15
TIM3 Internal Clock TIM3_VS_ClockSourceINT VP_TIM3_VS_ClockSourceINT
TIM3 PWM Generation CH1 TIM3_CH1 PA6
TIM4 Encoder Mode TIM4_CH1 PB6
TIM4 Encoder Mode TIM4_CH2 PB7
USART1 Asynchronous USART1_RX PA10
USART1 Asynchronous USART1_TX PA9
Pin Nb PINs FUNCTIONs LABELs
2 PC13-TAMPER-RTC GPIO_Output LED
3 PC14-OSC32_IN RCC_OSC32_IN
4 PC15-OSC32_OUT RCC_OSC32_OUT
5 PD0-OSC_IN RCC_OSC_IN
6 PD1-OSC_OUT RCC_OSC_OUT
10 PA0-WKUP ADC1_IN0 ADC_PT100
11 PA1 ADC1_IN1 ADC_SENSR
15 PA5 SPI1_SCK OLED_SCLK
16 PA6 TIM3_CH1 HEATER
17 PA7 SPI1_MOSI OLED_MOSI
18 PB0 GPIO_Output OLED_CS
19 PB1 GPIO_Output OLED_DC
21 PB10 GPIO_Output OLED_RST
30 PA9 USART1_TX
31 PA10 USART1_RX
34 PA13 SYS_JTMS-SWDIO
37 PA14 SYS_JTCK-SWCLK
38 PA15 TIM2_CH1 BUZZER
42 PB6 TIM4_CH1 KNOB_A
43 PB7 TIM4_CH2 KNOB_B
45 PB8 GPIO_Input KNOB_PUSH
SOFTWARE PROJECT
Project Settings :
Project Name : BluepillTrouba
Project Folder : /home/ondra/STM32Cube/BluepillTrouba
Toolchain / IDE : Makefile
Firmware Package Name and Version : STM32Cube FW_F1 V1.8.4
Code Generation Settings :
STM32Cube MCU packages and embedded software packs : Copy only the necessary library files
Generate peripheral initialization as a pair of '.c/.h' files per peripheral : Yes
Backup previously generated files when re-generating : No
Delete previously generated files when not re-generated : Yes
Set all free pins as analog (to optimize the power consumption) : No
Toolchains Settings :
Compiler Optimizations :

26
Core/Inc/main.h
Unescape View File

@ -63,26 +63,26 @@ void Error_Handler(void);
#define ADC_PT100_GPIO_Port GPIOA
#define ADC_SENSR_Pin GPIO_PIN_1
#define ADC_SENSR_GPIO_Port GPIOA
#define OLED_RST_Pin GPIO_PIN_3
#define OLED_RST_GPIO_Port GPIOA
#define OLED_DC_Pin GPIO_PIN_4
#define OLED_DC_GPIO_Port GPIOA
#define OLED_SCLK_Pin GPIO_PIN_5
#define OLED_SCLK_GPIO_Port GPIOA
#define OLED_CS_Pin GPIO_PIN_6
#define OLED_CS_GPIO_Port GPIOA
#define HEATER_Pin GPIO_PIN_6
#define HEATER_GPIO_Port GPIOA
#define OLED_MOSI_Pin GPIO_PIN_7
#define OLED_MOSI_GPIO_Port GPIOA
#define HEATER_Pin GPIO_PIN_11
#define HEATER_GPIO_Port GPIOB
#define OLED_CS_Pin GPIO_PIN_0
#define OLED_CS_GPIO_Port GPIOB
#define OLED_DC_Pin GPIO_PIN_1
#define OLED_DC_GPIO_Port GPIOB
#define OLED_RST_Pin GPIO_PIN_10
#define OLED_RST_GPIO_Port GPIOB
#define BUZZER_Pin GPIO_PIN_15
#define BUZZER_GPIO_Port GPIOA
#define KNOB_PUSH_Pin GPIO_PIN_5
#define KNOB_PUSH_GPIO_Port GPIOB
#define KNOB_B_Pin GPIO_PIN_6
#define KNOB_B_GPIO_Port GPIOB
#define KNOB_A_Pin GPIO_PIN_7
#define KNOB_A_Pin GPIO_PIN_6
#define KNOB_A_GPIO_Port GPIOB
#define KNOB_B_Pin GPIO_PIN_7
#define KNOB_B_GPIO_Port GPIOB
#define KNOB_PUSH_Pin GPIO_PIN_8
#define KNOB_PUSH_GPIO_Port GPIOB
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */

3
Core/Inc/tim.h
Unescape View File

@ -34,6 +34,8 @@ extern "C" {
extern TIM_HandleTypeDef htim2;
extern TIM_HandleTypeDef htim3;
extern TIM_HandleTypeDef htim4;
/* USER CODE BEGIN Private defines */
@ -41,6 +43,7 @@ extern TIM_HandleTypeDef htim4;
/* USER CODE END Private defines */
void MX_TIM2_Init(void);
void MX_TIM3_Init(void);
void MX_TIM4_Init(void);
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);

20
Core/Src/gpio.c
Unescape View File

@ -54,10 +54,7 @@ void MX_GPIO_Init(void)
HAL_GPIO_WritePin(LED_GPIO_Port, LED_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOA, OLED_RST_Pin|OLED_DC_Pin|OLED_CS_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(HEATER_GPIO_Port, HEATER_Pin, GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOB, OLED_CS_Pin|OLED_DC_Pin|OLED_RST_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin : PtPin */
GPIO_InitStruct.Pin = LED_Pin;
@ -66,24 +63,17 @@ void MX_GPIO_Init(void)
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(LED_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pins : PAPin PAPin PAPin */
GPIO_InitStruct.Pin = OLED_RST_Pin|OLED_DC_Pin|OLED_CS_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/*Configure GPIO pin : PtPin */
GPIO_InitStruct.Pin = HEATER_Pin;
/*Configure GPIO pins : PBPin PBPin PBPin */
GPIO_InitStruct.Pin = OLED_CS_Pin|OLED_DC_Pin|OLED_RST_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(HEATER_GPIO_Port, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/*Configure GPIO pin : PtPin */
GPIO_InitStruct.Pin = KNOB_PUSH_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(KNOB_PUSH_GPIO_Port, &GPIO_InitStruct);
}

1
Core/Src/main.c
Unescape View File

@ -106,6 +106,7 @@ int main(void)
MX_TIM4_Init();
MX_TIM2_Init();
MX_RTC_Init();
MX_TIM3_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */

101
Core/Src/tim.c
Unescape View File

@ -25,6 +25,7 @@
/* USER CODE END 0 */
TIM_HandleTypeDef htim2;
TIM_HandleTypeDef htim3;
TIM_HandleTypeDef htim4;
/* TIM2 init function */
@ -80,6 +81,60 @@ void MX_TIM2_Init(void)
/* USER CODE END TIM2_Init 2 */
HAL_TIM_MspPostInit(&htim2);
}
/* TIM3 init function */
void MX_TIM3_Init(void)
{
/* USER CODE BEGIN TIM3_Init 0 */
/* USER CODE END TIM3_Init 0 */
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
TIM_MasterConfigTypeDef sMasterConfig = {0};
TIM_OC_InitTypeDef sConfigOC = {0};
/* USER CODE BEGIN TIM3_Init 1 */
/* USER CODE END TIM3_Init 1 */
htim3.Instance = TIM3;
htim3.Init.Prescaler = 2;
htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
htim3.Init.Period = 65535;
htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
if (HAL_TIM_Base_Init(&htim3) != HAL_OK)
{
Error_Handler();
}
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
if (HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig) != HAL_OK)
{
Error_Handler();
}
if (HAL_TIM_PWM_Init(&htim3) != HAL_OK)
{
Error_Handler();
}
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
{
Error_Handler();
}
sConfigOC.OCMode = TIM_OCMODE_PWM1;
sConfigOC.Pulse = 32768;
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN TIM3_Init 2 */
/* USER CODE END TIM3_Init 2 */
HAL_TIM_MspPostInit(&htim3);
}
/* TIM4 init function */
void MX_TIM4_Init(void)
@ -140,6 +195,17 @@ void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
/* USER CODE END TIM2_MspInit 1 */
}
else if(tim_baseHandle->Instance==TIM3)
{
/* USER CODE BEGIN TIM3_MspInit 0 */
/* USER CODE END TIM3_MspInit 0 */
/* TIM3 clock enable */
__HAL_RCC_TIM3_CLK_ENABLE();
/* USER CODE BEGIN TIM3_MspInit 1 */
/* USER CODE END TIM3_MspInit 1 */
}
}
void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef* tim_encoderHandle)
@ -159,7 +225,7 @@ void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef* tim_encoderHandle)
PB6 ------> TIM4_CH1
PB7 ------> TIM4_CH2
*/
GPIO_InitStruct.Pin = KNOB_B_Pin|KNOB_A_Pin;
GPIO_InitStruct.Pin = KNOB_A_Pin|KNOB_B_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
@ -181,7 +247,6 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle)
/* USER CODE BEGIN TIM2_MspPostInit 0 */
/* USER CODE END TIM2_MspPostInit 0 */
__HAL_RCC_GPIOA_CLK_ENABLE();
/**TIM2 GPIO Configuration
PA15 ------> TIM2_CH1
@ -197,6 +262,25 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle)
/* USER CODE END TIM2_MspPostInit 1 */
}
else if(timHandle->Instance==TIM3)
{
/* USER CODE BEGIN TIM3_MspPostInit 0 */
/* USER CODE END TIM3_MspPostInit 0 */
__HAL_RCC_GPIOA_CLK_ENABLE();
/**TIM3 GPIO Configuration
PA6 ------> TIM3_CH1
*/
GPIO_InitStruct.Pin = HEATER_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(HEATER_GPIO_Port, &GPIO_InitStruct);
/* USER CODE BEGIN TIM3_MspPostInit 1 */
/* USER CODE END TIM3_MspPostInit 1 */
}
}
@ -214,6 +298,17 @@ void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
/* USER CODE END TIM2_MspDeInit 1 */
}
else if(tim_baseHandle->Instance==TIM3)
{
/* USER CODE BEGIN TIM3_MspDeInit 0 */
/* USER CODE END TIM3_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_TIM3_CLK_DISABLE();
/* USER CODE BEGIN TIM3_MspDeInit 1 */
/* USER CODE END TIM3_MspDeInit 1 */
}
}
void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef* tim_encoderHandle)
@ -231,7 +326,7 @@ void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef* tim_encoderHandle)
PB6 ------> TIM4_CH1
PB7 ------> TIM4_CH2
*/
HAL_GPIO_DeInit(GPIOB, KNOB_B_Pin|KNOB_A_Pin);
HAL_GPIO_DeInit(GPIOB, KNOB_A_Pin|KNOB_B_Pin);
/* TIM4 interrupt Deinit */
HAL_NVIC_DisableIRQ(TIM4_IRQn);

2
Makefile
Unescape View File

@ -1,5 +1,5 @@
##########################################################################################################################
# File automatically-generated by tool: [projectgenerator] version: [3.16.0] date: [Thu Feb 23 00:46:03 CET 2023]
# File automatically-generated by tool: [projectgenerator] version: [3.16.0] date: [Sat Mar 04 11:28:52 CET 2023]
##########################################################################################################################
# ------------------------------------------------

BIN
pt100.gnumeric
View File

Binary file not shown.
Write Preview
Loading…
Cancel
Save