electro
/
toaster-oven-bluepill
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

heater without pwm

Browse Source
fake-chip
Ondřej Hruška 2 years ago
parent 58afb1e8a5
commit 181f457534
7 changed files with 27 additions and 127 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 25
      BluepillTrouba.ioc
  2. 3
      Core/Inc/tim.h
  3. 16
      Core/Src/app_heater.c
  4. 10
      Core/Src/gpio.c
  5. 1
      Core/Src/main.c
  6. 97
      Core/Src/tim.c
  7. 2
      Makefile

25
BluepillTrouba.ioc
Unescape View File

@ -42,8 +42,7 @@ Mcu.CPN=STM32F103CBT6
Mcu.Family=STM32F1
Mcu.IP0=ADC1
Mcu.IP1=DMA
Mcu.IP10=TIM4
Mcu.IP11=USART1
Mcu.IP10=USART1
Mcu.IP2=FREERTOS
Mcu.IP3=IWDG
Mcu.IP4=NVIC
@ -51,8 +50,8 @@ Mcu.IP5=RCC
Mcu.IP6=SPI1
Mcu.IP7=SYS
Mcu.IP8=TIM2
Mcu.IP9=TIM3
Mcu.IPNb=12
Mcu.IP9=TIM4
Mcu.IPNb=11
Mcu.Name=STM32F103C(8-B)Tx
Mcu.Package=LQFP48
Mcu.Pin0=PC13-TAMPER-RTC
@ -73,7 +72,6 @@ Mcu.Pin21=VP_FREERTOS_VS_CMSIS_V2
Mcu.Pin22=VP_IWDG_VS_IWDG
Mcu.Pin23=VP_SYS_VS_tim1
Mcu.Pin24=VP_TIM2_VS_ClockSourceINT
Mcu.Pin25=VP_TIM3_VS_ClockSourceINT
Mcu.Pin3=PA0-WKUP
Mcu.Pin4=PA1
Mcu.Pin5=PA5
@ -81,7 +79,7 @@ Mcu.Pin6=PA6
Mcu.Pin7=PA7
Mcu.Pin8=PB0
Mcu.Pin9=PB1
Mcu.PinsNb=26
Mcu.PinsNb=25
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32F103CBTx
@ -129,10 +127,10 @@ PA5.GPIOParameters=GPIO_Label
PA5.GPIO_Label=OLED_SCLK
PA5.Mode=TX_Only_Simplex_Unidirect_Master
PA5.Signal=SPI1_SCK
PA6.GPIOParameters=GPIO_Speed,GPIO_Label
PA6.GPIOParameters=GPIO_Label
PA6.GPIO_Label=HEATER
PA6.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
PA6.Signal=S_TIM3_CH1
PA6.Locked=true
PA6.Signal=GPIO_Output
PA7.GPIOParameters=GPIO_Label
PA7.GPIO_Label=OLED_MOSI
PA7.Mode=TX_Only_Simplex_Unidirect_Master
@ -231,8 +229,6 @@ SH.ADCx_IN1.0=ADC1_IN1,IN1
SH.ADCx_IN1.ConfNb=1
SH.S_TIM2_CH1_ETR.0=TIM2_CH1,PWM Generation1 CH1
SH.S_TIM2_CH1_ETR.ConfNb=1
SH.S_TIM3_CH1.0=TIM3_CH1,PWM Generation1 CH1
SH.S_TIM3_CH1.ConfNb=1
SH.S_TIM4_CH1.0=TIM4_CH1,Encoder_Interface
SH.S_TIM4_CH1.ConfNb=1
SH.S_TIM4_CH2.0=TIM4_CH2,Encoder_Interface
@ -246,11 +242,6 @@ SPI1.VirtualType=VM_MASTER
TIM2.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
TIM2.IPParameters=Channel-PWM Generation1 CH1,Prescaler
TIM2.Prescaler=2
TIM3.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
TIM3.IPParameters=Channel-PWM Generation1 CH1,Prescaler,Pulse-PWM Generation1 CH1,Period
TIM3.Period=65535
TIM3.Prescaler=2
TIM3.Pulse-PWM\ Generation1\ CH1=0
TIM4.IC2Filter=15
TIM4.IPParameters=IC2Filter,Prescaler
TIM4.Prescaler=0
@ -269,6 +260,4 @@ VP_SYS_VS_tim1.Mode=TIM1
VP_SYS_VS_tim1.Signal=SYS_VS_tim1
VP_TIM2_VS_ClockSourceINT.Mode=Internal
VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
VP_TIM3_VS_ClockSourceINT.Mode=Internal
VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT
board=custom

3
Core/Inc/tim.h
Unescape View File

@ -34,8 +34,6 @@ extern "C" {
extern TIM_HandleTypeDef htim2;
extern TIM_HandleTypeDef htim3;
extern TIM_HandleTypeDef htim4;
/* USER CODE BEGIN Private defines */
@ -43,7 +41,6 @@ extern TIM_HandleTypeDef htim4;
/* USER CODE END Private defines */
void MX_TIM2_Init(void);
void MX_TIM3_Init(void);
void MX_TIM4_Init(void);
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);

16
Core/Src/app_heater.c
Unescape View File

@ -8,18 +8,18 @@
void app_heater_init()
{
HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_1);
TIM3->ARR = 25714;
// HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_1);
// TIM3->ARR = 25714;
}
void app_heater_set(bool active)
{
if (active) {
TIM3->CCR1 = TIM3->ARR / 2; // testing - 50%
} else {
TIM3->CCR1 = 0;
}
// if (active) {
// TIM3->CCR1 = TIM3->ARR / 2; // testing - 50%
// } else {
// TIM3->CCR1 = 0;
// }
//HAL_GPIO_WritePin(HEATER_GPIO_Port, HEATER_Pin, active);
HAL_GPIO_WritePin(HEATER_GPIO_Port, HEATER_Pin, active);
}

10
Core/Src/gpio.c
Unescape View File

@ -53,6 +53,9 @@ void MX_GPIO_Init(void)
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(LED_GPIO_Port, LED_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(HEATER_GPIO_Port, HEATER_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOB, OLED_CS_Pin|OLED_DC_Pin|OLED_RST_Pin, GPIO_PIN_RESET);
@ -63,6 +66,13 @@ void MX_GPIO_Init(void)
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(LED_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pin : PtPin */
GPIO_InitStruct.Pin = HEATER_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(HEATER_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pins : PBPin PBPin PBPin */
GPIO_InitStruct.Pin = OLED_CS_Pin|OLED_DC_Pin|OLED_RST_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;

1
Core/Src/main.c
Unescape View File

@ -104,7 +104,6 @@ int main(void)
MX_DMA_Init();
MX_TIM4_Init();
MX_TIM2_Init();
MX_TIM3_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */

97
Core/Src/tim.c
Unescape View File

@ -25,7 +25,6 @@
/* USER CODE END 0 */
TIM_HandleTypeDef htim2;
TIM_HandleTypeDef htim3;
TIM_HandleTypeDef htim4;
/* TIM2 init function */
@ -81,60 +80,6 @@ void MX_TIM2_Init(void)
/* USER CODE END TIM2_Init 2 */
HAL_TIM_MspPostInit(&htim2);
}
/* TIM3 init function */
void MX_TIM3_Init(void)
{
/* USER CODE BEGIN TIM3_Init 0 */
/* USER CODE END TIM3_Init 0 */
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
TIM_MasterConfigTypeDef sMasterConfig = {0};
TIM_OC_InitTypeDef sConfigOC = {0};
/* USER CODE BEGIN TIM3_Init 1 */
/* USER CODE END TIM3_Init 1 */
htim3.Instance = TIM3;
htim3.Init.Prescaler = 2;
htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
htim3.Init.Period = 65535;
htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
if (HAL_TIM_Base_Init(&htim3) != HAL_OK)
{
Error_Handler();
}
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
if (HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig) != HAL_OK)
{
Error_Handler();
}
if (HAL_TIM_PWM_Init(&htim3) != HAL_OK)
{
Error_Handler();
}
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
{
Error_Handler();
}
sConfigOC.OCMode = TIM_OCMODE_PWM1;
sConfigOC.Pulse = 0;
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN TIM3_Init 2 */
/* USER CODE END TIM3_Init 2 */
HAL_TIM_MspPostInit(&htim3);
}
/* TIM4 init function */
void MX_TIM4_Init(void)
@ -195,17 +140,6 @@ void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
/* USER CODE END TIM2_MspInit 1 */
}
else if(tim_baseHandle->Instance==TIM3)
{
/* USER CODE BEGIN TIM3_MspInit 0 */
/* USER CODE END TIM3_MspInit 0 */
/* TIM3 clock enable */
__HAL_RCC_TIM3_CLK_ENABLE();
/* USER CODE BEGIN TIM3_MspInit 1 */
/* USER CODE END TIM3_MspInit 1 */
}
}
void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef* tim_encoderHandle)
@ -247,6 +181,7 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle)
/* USER CODE BEGIN TIM2_MspPostInit 0 */
/* USER CODE END TIM2_MspPostInit 0 */
__HAL_RCC_GPIOA_CLK_ENABLE();
/**TIM2 GPIO Configuration
PA15 ------> TIM2_CH1
@ -262,25 +197,6 @@ void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle)
/* USER CODE END TIM2_MspPostInit 1 */
}
else if(timHandle->Instance==TIM3)
{
/* USER CODE BEGIN TIM3_MspPostInit 0 */
/* USER CODE END TIM3_MspPostInit 0 */
__HAL_RCC_GPIOA_CLK_ENABLE();
/**TIM3 GPIO Configuration
PA6 ------> TIM3_CH1
*/
GPIO_InitStruct.Pin = HEATER_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(HEATER_GPIO_Port, &GPIO_InitStruct);
/* USER CODE BEGIN TIM3_MspPostInit 1 */
/* USER CODE END TIM3_MspPostInit 1 */
}
}
@ -298,17 +214,6 @@ void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
/* USER CODE END TIM2_MspDeInit 1 */
}
else if(tim_baseHandle->Instance==TIM3)
{
/* USER CODE BEGIN TIM3_MspDeInit 0 */
/* USER CODE END TIM3_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_TIM3_CLK_DISABLE();
/* USER CODE BEGIN TIM3_MspDeInit 1 */
/* USER CODE END TIM3_MspDeInit 1 */
}
}
void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef* tim_encoderHandle)

2
Makefile
Unescape View File

@ -1,5 +1,5 @@
##########################################################################################################################
# File automatically-generated by tool: [projectgenerator] version: [3.16.0] date: [Mon Mar 06 00:33:47 CET 2023]
# File automatically-generated by tool: [projectgenerator] version: [3.16.0] date: [Mon Mar 06 00:56:47 CET 2023]
##########################################################################################################################
# ------------------------------------------------

Write Preview
Loading…
Cancel
Save