improvements and better example main.c

CMakeLists.txt.clion

@@ -0,0 +1,27 @@
+cmake_minimum_required(VERSION 3.7)
+project(stm8 C)
+project(STM8S)
+set(CMAKE_CXX_STANDARD GNU99)
+
+add_definitions(
+        -DSKIP_TRAPS=1
+        -DSTM8S103
+        -D__SDCC__
+        -D_SDCC_
+        -DINTERRUPT=
+        -D__interrupt\(n\)=__attribute__\(\(interrupt\(n\)\)\)
+        -D__SDCC)
+
+# User program
+include_directories(User)
+include_directories(Library/SPL)
+#include_directories(Libraries/SPL/inc)
+file(GLOB_RECURSE USER_SOURCES "User/*.c" "User/*.h")
+
+file(GLOB_RECURSE LIB_SOURCES "Library/SPL/*.h")
+
+# Systemmake
+include_directories(/usr/share/sdcc/include/)
+link_directories(/usr/share/sdcc/include/)
+
+add_executable(firmware ${USER_SOURCES} ${LIB_SOURCES})

Library/SPL/stm8s_itc.h

@@ -169,8 +169,8 @@ typedef enum {
 /** @addtogroup ITC_Exported_Functions
   * @{
   */
-#if 0
 
+#if 0
 uint8_t ITC_GetCPUCC(void);
 
 void ITC_DeInit(void);
@@ -180,10 +180,10 @@ uint8_t ITC_GetSoftIntStatus(void);
 void ITC_SetSoftwarePriority(ITC_Irq_TypeDef IrqNum, ITC_PriorityLevel_TypeDef PriorityValue);
 
 ITC_PriorityLevel_TypeDef ITC_GetSoftwarePriority(ITC_Irq_TypeDef IrqNum);
-
 #endif
 
 
+
 /** @addtogroup STM8S_StdPeriph_Driver
   * @{
   */

Library/SPL/stm8s_uart1.h

@@ -181,12 +181,13 @@ typedef enum {
  * Baud rates at 16 MHz
  */
 typedef enum {
-	UART_BAUD_9600 = (uint16_t) 0x0693,
+	UART_BAUD_9600 = (uint16_t) 0x0368,
-	UART_BAUD_19200 = (uint16_t) 0x0341,
+	UART_BAUD_19200 = (uint16_t) 0x0134,
-	UART_BAUD_57600 = (uint16_t) 0x0116,
+	UART_BAUD_57600 = (uint16_t) 0x0611,
-	UART_BAUD_115200 = (uint16_t) 0x0008B,
+	UART_BAUD_115200 = (uint16_t) 0x0B08,
-	UART_BAUD_230400 = (uint16_t) 0x00045,
+	UART_BAUD_230400 = (uint16_t) 0x0504,
-	UART_BAUD_460800 = (uint16_t) 0x00023
+	UART_BAUD_460800 = (uint16_t) 0x0302,
+	UART_BAUD_921600 = (uint16_t) 0x0101
 } UART_Baud_TypeDef;
 
 /**
@@ -196,14 +197,11 @@ typedef enum {
  * @param baud - UART_BAUD_*
  */
 void inline UART_SimpleInit(UART_Baud_TypeDef baud) {
-	UART1->BRR1 = (uint8_t) ((baud) & 0xFF);
 	UART1->BRR2 = (uint8_t) (((baud) >> 8) & 0xFF);
-	UART1->CR2 |= (uint8_t) (UART1_CR2_TEN | UART1_CR2_REN);
+	UART1->BRR1 = (uint8_t) ((baud) & 0xFF);
-	UART1->CR3 |= (uint8_t) UART1_CR3_CKEN;
+	UART1->CR2 = (uint8_t) (UART1_CR2_TEN | UART1_CR2_REN);
 }
 
-
-
 /**
   * @}
   */

Makefile

@@ -38,6 +38,8 @@ PRJ_OBJECTS := $(addprefix $(OUTPUT_DIR)/, $(PRJ_SOURCE:.c=.rel))
 #SPL_SRC_DIR = /usr/share/sdcc/lib/src/stm8/
 #SPL_INC_DIR = /usr/share/sdcc/include/stm8/
 
+LIB_INC_DIR = /usr/share/sdcc/include/
+
 #SPL_SRC_DIR = Libraries/SPL/src/
 SPL_INC_DIR = Library/SPL/
 # add all library sources used here
@@ -46,7 +48,7 @@ SPL_SOURCE  =
 SPL_OBJECTS := $(addprefix $(OUTPUT_DIR)/, $(SPL_SOURCE:.c=.rel))
 
 # collect all include folders
-INCLUDE = -I$(PRJ_SRC_DIR) -I$(SPL_INC_DIR)
+INCLUDE = -I$(PRJ_SRC_DIR) -I$(SPL_INC_DIR) -I$(LIB_INC_DIR)
 
 # collect all source directories
 VPATH=$(PRJ_SRC_DIR):$(SPL_SRC_DIR)

README.md

@@ -12,3 +12,6 @@ there's lots of crap I don't understand, so you'll do better just keeping it
 intact or re-implementing it).
 
 This is intended to be used with SDCC on linux.
+
+**The CMakeLists file is for CLion to stop bitching about missing includes and fake syntax errors.
+It's not used for building. Remove the .clion suffix if you want to use it**

User/main.c

@@ -1,12 +1,70 @@
-#include <stdio.h>
+#include "stm8s.h"
+#include <stdlib.h>
 
-#include <stm8s.h>
+void Delay(uint16_t nCount) {
-#include "stm8s_it.h"
+	uint8_t i;
+	for (; nCount != 0; nCount--) {
+		for (i = 255; i != 0; i--) {}
+	}
+}
+
+void putchar(char c) {
+	while ((UART1->SR & UART1_SR_TXE) == 0);
+	UART1->DR = (u8)c;
+}
+
+void puts(const char *ch) {
+	char c;
+	while ((c = *ch++) != 0)
+		putchar(c);
+}
+
+void puts_itoa(int32_t n, unsigned char radix) {
+	char s[10], i, c;
+	_ltoa(n, s, radix);
+	i = 0;
+	while((c = s[i++]) != 0) {
+		putchar(c);
+	}
+}
 
 void main(void)
 {
+	// Disable div8
 	CLK_HSIPrescalerConfig(CLK_PRESCALER_HSIDIV1);
+
+	// LED for blinking
+	GPIO_Init(GPIOB, GPIO_PIN_5, GPIO_MODE_OUT_PP_HIGH_FAST);
+
+	// minimal uart init
 	UART_SimpleInit(UART_BAUD_115200);
 
-	while(1);
+	// irq conf
+	UART1_ITConfig(UART1_IT_RXNE_OR, ENABLE);
+	enableInterrupts();
+
+	// Clear screen & print system frequency
+	puts("\033c\033[?25lClock freq = "); // cls
+	puts_itoa(CLK_GetClockFreq(), 10);
+	puts(" Hz"); // cls
+
+	// echo & blinking
+	while (1) {
+		Delay(2000);
+		GPIOB->ODR ^= GPIO_PIN_5;
+	}
+}
+
+/**
+  * @brief UART1 RX Interrupt routine.
+  * @param  None
+  * @retval None
+  */
+INTERRUPT_HANDLER(UART1_RX_IRQHandler, 18)
+{
+	if (UART1->SR & UART1_SR_RXNE)
+		UART1->DR = (u8) (UART1->DR); // echo
+
+	if (UART1->SR & UART1_SR_OR)
+		UART1->SR &= ~UART1_SR_OR; // clear OR flag
 }