You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2866 lines
118 KiB
2866 lines
118 KiB
/**
|
|
******************************************************************************
|
|
* @file stm8s.h
|
|
* @author MCD Application Team
|
|
* @version V2.2.0
|
|
* @date 30-September-2014
|
|
* @brief This file contains all HW registers definitions and memory mapping.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
|
|
*
|
|
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
|
* You may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at:
|
|
*
|
|
* http://www.st.com/software_license_agreement_liberty_v2
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM8S_H
|
|
#define __STM8S_H
|
|
|
|
/** @addtogroup STM8S_StdPeriph_Driver
|
|
* @{
|
|
*/
|
|
|
|
/* Uncomment the line below according to the target STM8S or STM8A device used in your
|
|
application. */
|
|
|
|
/* #define STM8S208 */ /*!< STM8S High density devices with CAN */
|
|
/* #define STM8S207 */ /*!< STM8S High density devices without CAN */
|
|
/* #define STM8S007 */ /*!< STM8S Value Line High density devices */
|
|
/* #define STM8AF52Ax */ /*!< STM8A High density devices with CAN */
|
|
/* #define STM8AF62Ax */ /*!< STM8A High density devices without CAN */
|
|
/* #define STM8S105 */ /*!< STM8S Medium density devices */
|
|
/* #define STM8S005 */ /*!< STM8S Value Line Medium density devices */
|
|
/* #define STM8AF626x */ /*!< STM8A Medium density devices */
|
|
/* #define STM8AF622x */ /*!< STM8A Low density devices */
|
|
/* #define STM8S103 */ /*!< STM8S Low density devices */
|
|
/* #define STM8S003 */ /*!< STM8S Value Line Low density devices */
|
|
/* #define STM8S903 */ /*!< STM8S Low density devices */
|
|
|
|
/* Tip: To avoid modifying this file each time you need to switch between these
|
|
devices, you can define the device in your toolchain compiler preprocessor.
|
|
|
|
- High-Density STM8A devices are the STM8AF52xx STM8AF6269/8x/Ax,
|
|
STM8AF51xx, and STM8AF6169/7x/8x/9x/Ax microcontrollers where the Flash memory
|
|
density ranges between 32 to 128 Kbytes
|
|
- Medium-Density STM8A devices are the STM8AF622x/4x, STM8AF6266/68,
|
|
STM8AF612x/4x, and STM8AF6166/68 microcontrollers where the Flash memory
|
|
density ranges between 8 to 32 Kbytes
|
|
- High-Density STM8S devices are the STM8S207xx, STM8S007 and STM8S208xx microcontrollers
|
|
where the Flash memory density ranges between 32 to 128 Kbytes.
|
|
- Medium-Density STM8S devices are the STM8S105x and STM8S005 microcontrollers
|
|
where the Flash memory density ranges between 16 to 32-Kbytes.
|
|
- Low-Density STM8A devices are the STM8AF622x microcontrollers where the Flash
|
|
density is 8 Kbytes.
|
|
- Low-Density STM8S devices are the STM8S103xx, STM8S003 and STM8S903xx microcontrollers
|
|
where the Flash density is 8 Kbytes. */
|
|
|
|
#if !defined (STM8S208) && !defined (STM8S207) && !defined (STM8S105) && \
|
|
!defined (STM8S103) && !defined (STM8S903) && !defined (STM8AF52Ax) && \
|
|
!defined (STM8AF62Ax) && !defined (STM8AF626x) && !defined (STM8S007) && \
|
|
!defined (STM8S003)&& !defined (STM8S005) && !defined (STM8AF622x)
|
|
#error "Please select first the target STM8S/A device used in your application (in stm8s.h file)"
|
|
#endif
|
|
|
|
/******************************************************************************/
|
|
/* Library configuration section */
|
|
/******************************************************************************/
|
|
/* Check the used compiler */
|
|
#if defined(__CSMC__)
|
|
#define _COSMIC_
|
|
#elif defined(__RCST7__)
|
|
#define _RAISONANCE_
|
|
#elif defined(__ICCSTM8__)
|
|
#define _IAR_
|
|
#elif defined(__SDCC) // SDCC patch: add compiler
|
|
#define _SDCC_
|
|
#else
|
|
#error "Unsupported Compiler!" /* Compiler defines not found */
|
|
#endif
|
|
|
|
#if !defined USE_STDPERIPH_DRIVER
|
|
/* Comment the line below if you will not use the peripherals drivers.
|
|
In this case, these drivers will not be included and the application code will be
|
|
based on direct access to peripherals registers */
|
|
#define USE_STDPERIPH_DRIVER
|
|
#endif
|
|
|
|
/**
|
|
* @brief In the following line adjust the value of External High Speed oscillator (HSE)
|
|
used in your application
|
|
|
|
Tip: To avoid modifying this file each time you need to use different HSE, you
|
|
can define the HSE value in your toolchain compiler preprocessor.
|
|
*/
|
|
#if !defined HSE_Value
|
|
#if defined (STM8S208) || defined (STM8S207) || defined (STM8S007) || defined (STM8AF52Ax) || \
|
|
defined (STM8AF62Ax) || defined (STM8AF622x)
|
|
#define HSE_VALUE ((uint32_t)24000000) /* Value of the External oscillator in Hz*/
|
|
#else
|
|
#define HSE_VALUE ((uint32_t)16000000) /* Value of the External oscillator in Hz*/
|
|
#endif /* STM8S208 || STM8S207 || STM8S007 || STM8AF62Ax || STM8AF52Ax || STM8AF622x */
|
|
#endif /* HSE_Value */
|
|
|
|
/**
|
|
* @brief Definition of Device on-chip RC oscillator frequencies
|
|
*/
|
|
#define HSI_VALUE ((uint32_t)16000000) /*!< Typical Value of the HSI in Hz */
|
|
#define LSI_VALUE ((uint32_t)128000) /*!< Typical Value of the LSI in Hz */
|
|
|
|
#ifdef _COSMIC_
|
|
#define FAR @far
|
|
#define NEAR @near
|
|
#define TINY @tiny
|
|
#define EEPROM @eeprom
|
|
#define CONST const
|
|
#elif defined (_RAISONANCE_) /* __RCST7__ */
|
|
#define FAR far
|
|
#define NEAR data
|
|
#define TINY page0
|
|
#define EEPROM eeprom
|
|
#define CONST code
|
|
#if defined (STM8S208) || defined (STM8S207) || defined (STM8S007) || defined (STM8AF52Ax) || \
|
|
defined (STM8AF62Ax)
|
|
/*!< Used with memory Models for code higher than 64K */
|
|
#define MEMCPY fmemcpy
|
|
#else /* STM8S903, STM8S103, STM8S003, STM8S105, STM8AF626x, STM8AF622x */
|
|
/*!< Used with memory Models for code less than 64K */
|
|
#define MEMCPY memcpy
|
|
#endif /* STM8S208 or STM8S207 or STM8S007 or STM8AF62Ax or STM8AF52Ax */
|
|
#elif defined (_SDCC_) // SDCC patch: mostly not required / not supported
|
|
#define FAR
|
|
#define NEAR
|
|
#define TINY
|
|
#define EEPROM
|
|
#define CONST const
|
|
#else /*_IAR_*/
|
|
#define FAR __far
|
|
#define NEAR __near
|
|
#define TINY __tiny
|
|
#define EEPROM __eeprom
|
|
#define CONST const
|
|
#endif /* __CSMC__ */
|
|
|
|
/* For FLASH routines, select whether pointer will be declared as near (2 bytes,
|
|
to handle code smaller than 64KB) or far (3 bytes, to handle code larger
|
|
than 64K) */
|
|
|
|
#if defined (STM8S105) || defined (STM8S005) || defined (STM8S103) || defined (STM8S003) || \
|
|
defined (STM8S903) || defined (STM8AF626x) || defined (STM8AF622x)
|
|
/*!< Used with memory Models for code smaller than 64K */
|
|
#define PointerAttr NEAR
|
|
#define MemoryAddressCast uint16_t
|
|
#else /* STM8S208 or STM8S207 or STM8AF62Ax or STM8AF52Ax */
|
|
/*!< Used with memory Models for code higher than 64K */
|
|
#define PointerAttr FAR
|
|
#define MemoryAddressCast uint32_t
|
|
#endif /* STM8S105 or STM8S103 or STM8S003 or STM8S903 or STM8AF626x or STM8AF622x */
|
|
|
|
/* Uncomment the line below to enable the FLASH functions execution from RAM */
|
|
#if !defined (RAM_EXECUTION)
|
|
/* #define RAM_EXECUTION (1) */
|
|
#endif /* RAM_EXECUTION */
|
|
|
|
#ifdef RAM_EXECUTION
|
|
#ifdef _COSMIC_
|
|
#define IN_RAM(a) a
|
|
#elif defined (_RAISONANCE_) /* __RCST7__ */
|
|
#define IN_RAM(a) a inram
|
|
#elif defined (_SDCC_) // SDCC patch: code in RAM not yet patched
|
|
#define IN_RAM(a) a
|
|
#else /*_IAR_*/
|
|
#define IN_RAM(a) __ramfunc a
|
|
#endif /* _COSMIC_ */
|
|
#else
|
|
#define IN_RAM(a) a
|
|
#endif /* RAM_EXECUTION */
|
|
|
|
/*!< [31:16] STM8S Standard Peripheral Library main version V2.2.0*/
|
|
#define __STM8S_STDPERIPH_VERSION_MAIN ((uint8_t)0x02) /*!< [31:24] main version */
|
|
#define __STM8S_STDPERIPH_VERSION_SUB1 ((uint8_t)0x02) /*!< [23:16] sub1 version */
|
|
#define __STM8S_STDPERIPH_VERSION_SUB2 ((uint8_t)0x00) /*!< [15:8] sub2 version */
|
|
#define __STM8S_STDPERIPH_VERSION_RC ((uint8_t)0x00) /*!< [7:0] release candidate */
|
|
#define __STM8S_STDPERIPH_VERSION ( (__STM8S_STDPERIPH_VERSION_MAIN << 24)\
|
|
|(__STM8S_STDPERIPH_VERSION_SUB1 << 16)\
|
|
|(__STM8S_STDPERIPH_VERSION_SUB2 << 8)\
|
|
|(__STM8S_STDPERIPH_VERSION_RC))
|
|
|
|
/******************************************************************************/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
|
|
/* Exported types and constants ----------------------------------------------*/
|
|
|
|
/** @addtogroup Exported_types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* IO definitions
|
|
*
|
|
* define access restrictions to peripheral registers
|
|
*/
|
|
#define __I volatile const /*!< defines 'read only' permissions */
|
|
#define __O volatile /*!< defines 'write only' permissions */
|
|
#define __IO volatile /*!< defines 'read / write' permissions */
|
|
|
|
/*!< Signed integer types */
|
|
typedef signed char int8_t;
|
|
typedef signed short int16_t;
|
|
typedef signed long int32_t;
|
|
|
|
/*!< Unsigned integer types */
|
|
typedef unsigned char uint8_t;
|
|
typedef unsigned short uint16_t;
|
|
typedef unsigned long uint32_t;
|
|
|
|
/*!< STM8 Standard Peripheral Library old types (maintained for legacy purpose) */
|
|
|
|
typedef int32_t s32;
|
|
typedef int16_t s16;
|
|
typedef int8_t s8;
|
|
|
|
typedef uint32_t u32;
|
|
typedef uint16_t u16;
|
|
typedef uint8_t u8;
|
|
|
|
|
|
typedef enum {
|
|
FALSE = 0, TRUE = !FALSE
|
|
} bool;
|
|
//#include <stdbool.h>
|
|
//#define TRUE true
|
|
//#define FALSE false
|
|
|
|
typedef enum {
|
|
RESET = 0, SET = !RESET
|
|
} FlagStatus, ITStatus, BitStatus, BitAction;
|
|
|
|
typedef enum {
|
|
DISABLE = 0, ENABLE = !DISABLE
|
|
} FunctionalState;
|
|
#define IS_FUNCTIONALSTATE_OK(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
|
|
|
|
typedef enum {
|
|
ERROR = 0, SUCCESS = !ERROR
|
|
} ErrorStatus;
|
|
|
|
#define U8_MAX (255)
|
|
#define S8_MAX (127)
|
|
#define S8_MIN (-128)
|
|
#define U16_MAX (65535u)
|
|
#define S16_MAX (32767)
|
|
#define S16_MIN (-32768)
|
|
#define U32_MAX (4294967295uL)
|
|
#define S32_MAX (2147483647)
|
|
#define S32_MIN (-2147483648uL)
|
|
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
/**
|
|
* @brief The assert_param macro is used for function's parameters check.
|
|
* @param expr: If expr is false, it calls assert_failed function
|
|
* which reports the name of the source file and the source
|
|
* line number of the call that failed.
|
|
* If expr is true, it returns no value.
|
|
* @retval : None
|
|
*/
|
|
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
|
|
/* Exported functions ------------------------------------------------------- */
|
|
void assert_failed(uint8_t *file, uint32_t line);
|
|
#else
|
|
#define assert_param(expr) ((void)0)
|
|
#endif /* USE_FULL_ASSERT */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup MAP_FILE_Exported_Types_and_Constants
|
|
* @{
|
|
*/
|
|
|
|
/******************************************************************************/
|
|
/* IP registers structures */
|
|
/******************************************************************************/
|
|
|
|
/**
|
|
* @brief General Purpose I/Os (GPIO)
|
|
*/
|
|
typedef struct GPIO_struct {
|
|
__IO uint8_t ODR; /*!< Output Data Register */
|
|
__IO uint8_t IDR; /*!< Input Data Register */
|
|
__IO uint8_t DDR; /*!< Data Direction Register */
|
|
__IO uint8_t CR1; /*!< Configuration Register 1 */
|
|
__IO uint8_t CR2; /*!< Configuration Register 2 */
|
|
}
|
|
GPIO_TypeDef;
|
|
|
|
/** @addtogroup GPIO_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define GPIO_ODR_RESET_VALUE ((uint8_t)0x00)
|
|
#define GPIO_DDR_RESET_VALUE ((uint8_t)0x00)
|
|
#define GPIO_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define GPIO_CR2_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
#if defined(STM8S105) || defined(STM8S005) || defined(STM8S103) || defined(STM8S003) || \
|
|
defined(STM8S903) || defined(STM8AF626x) || defined(STM8AF622x)
|
|
/**
|
|
* @brief Analog to Digital Converter (ADC1)
|
|
*/
|
|
typedef struct ADC1_struct {
|
|
__IO uint8_t DB0RH; /*!< ADC1 Data Buffer Register (MSB) */
|
|
__IO uint8_t DB0RL; /*!< ADC1 Data Buffer Register (LSB) */
|
|
__IO uint8_t DB1RH; /*!< ADC1 Data Buffer Register (MSB) */
|
|
__IO uint8_t DB1RL; /*!< ADC1 Data Buffer Register (LSB) */
|
|
__IO uint8_t DB2RH; /*!< ADC1 Data Buffer Register (MSB) */
|
|
__IO uint8_t DB2RL; /*!< ADC1 Data Buffer Register (LSB) */
|
|
__IO uint8_t DB3RH; /*!< ADC1 Data Buffer Register (MSB) */
|
|
__IO uint8_t DB3RL; /*!< ADC1 Data Buffer Register (LSB) */
|
|
__IO uint8_t DB4RH; /*!< ADC1 Data Buffer Register (MSB) */
|
|
__IO uint8_t DB4RL; /*!< ADC1 Data Buffer Register (LSB) */
|
|
__IO uint8_t DB5RH; /*!< ADC1 Data Buffer Register (MSB) */
|
|
__IO uint8_t DB5RL; /*!< ADC1 Data Buffer Register (LSB) */
|
|
__IO uint8_t DB6RH; /*!< ADC1 Data Buffer Register (MSB) */
|
|
__IO uint8_t DB6RL; /*!< ADC1 Data Buffer Register (LSB) */
|
|
__IO uint8_t DB7RH; /*!< ADC1 Data Buffer Register (MSB) */
|
|
__IO uint8_t DB7RL; /*!< ADC1 Data Buffer Register (LSB) */
|
|
__IO uint8_t DB8RH; /*!< ADC1 Data Buffer Register (MSB) */
|
|
__IO uint8_t DB8RL; /*!< ADC1 Data Buffer Register (LSB) */
|
|
__IO uint8_t DB9RH; /*!< ADC1 Data Buffer Register (MSB) */
|
|
__IO uint8_t DB9RL; /*!< ADC1 Data Buffer Register (LSB) */
|
|
uint8_t RESERVED[12]; /*!< Reserved byte */
|
|
__IO uint8_t CSR; /*!< ADC1 control status register */
|
|
__IO uint8_t CR1; /*!< ADC1 configuration register 1 */
|
|
__IO uint8_t CR2; /*!< ADC1 configuration register 2 */
|
|
__IO uint8_t CR3; /*!< ADC1 configuration register 3 */
|
|
__IO uint8_t DRH; /*!< ADC1 Data high */
|
|
__IO uint8_t DRL; /*!< ADC1 Data low */
|
|
__IO uint8_t TDRH; /*!< ADC1 Schmitt trigger disable register high */
|
|
__IO uint8_t TDRL; /*!< ADC1 Schmitt trigger disable register low */
|
|
__IO uint8_t HTRH; /*!< ADC1 high threshold register High*/
|
|
__IO uint8_t HTRL; /*!< ADC1 high threshold register Low*/
|
|
__IO uint8_t LTRH; /*!< ADC1 low threshold register high */
|
|
__IO uint8_t LTRL; /*!< ADC1 low threshold register low */
|
|
__IO uint8_t AWSRH; /*!< ADC1 watchdog status register high */
|
|
__IO uint8_t AWSRL; /*!< ADC1 watchdog status register low */
|
|
__IO uint8_t AWCRH; /*!< ADC1 watchdog control register high */
|
|
__IO uint8_t AWCRL; /*!< ADC1 watchdog control register low */
|
|
}
|
|
ADC1_TypeDef;
|
|
|
|
/** @addtogroup ADC1_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
#define ADC1_CSR_RESET_VALUE ((uint8_t)0x00)
|
|
#define ADC1_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define ADC1_CR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define ADC1_CR3_RESET_VALUE ((uint8_t)0x00)
|
|
#define ADC1_TDRL_RESET_VALUE ((uint8_t)0x00)
|
|
#define ADC1_TDRH_RESET_VALUE ((uint8_t)0x00)
|
|
#define ADC1_HTRL_RESET_VALUE ((uint8_t)0x03)
|
|
#define ADC1_HTRH_RESET_VALUE ((uint8_t)0xFF)
|
|
#define ADC1_LTRH_RESET_VALUE ((uint8_t)0x00)
|
|
#define ADC1_LTRL_RESET_VALUE ((uint8_t)0x00)
|
|
#define ADC1_AWCRH_RESET_VALUE ((uint8_t)0x00)
|
|
#define ADC1_AWCRL_RESET_VALUE ((uint8_t)0x00)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup ADC1_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
#define ADC1_CSR_EOC ((uint8_t)0x80) /*!< End of Conversion mask */
|
|
#define ADC1_CSR_AWD ((uint8_t)0x40) /*!< Analog Watch Dog Status mask */
|
|
#define ADC1_CSR_EOCIE ((uint8_t)0x20) /*!< Interrupt Enable for EOC mask */
|
|
#define ADC1_CSR_AWDIE ((uint8_t)0x10) /*!< Analog Watchdog interrupt enable mask */
|
|
#define ADC1_CSR_CH ((uint8_t)0x0F) /*!< Channel selection bits mask */
|
|
|
|
#define ADC1_CR1_SPSEL ((uint8_t)0x70) /*!< Prescaler selection mask */
|
|
#define ADC1_CR1_CONT ((uint8_t)0x02) /*!< Continuous conversion mask */
|
|
#define ADC1_CR1_ADON ((uint8_t)0x01) /*!< A/D Converter on/off mask */
|
|
|
|
#define ADC1_CR2_EXTTRIG ((uint8_t)0x40) /*!< External trigger enable mask */
|
|
#define ADC1_CR2_EXTSEL ((uint8_t)0x30) /*!< External event selection mask */
|
|
#define ADC1_CR2_ALIGN ((uint8_t)0x08) /*!< Data Alignment mask */
|
|
#define ADC1_CR2_SCAN ((uint8_t)0x02) /*!< Scan mode mask */
|
|
|
|
#define ADC1_CR3_DBUF ((uint8_t)0x80) /*!< Data Buffer Enable mask */
|
|
#define ADC1_CR3_OVR ((uint8_t)0x40) /*!< Overrun Status Flag mask */
|
|
|
|
#endif /* (STM8S105) ||(STM8S103) || (STM8S005) ||(STM8S003) || (STM8S903) || (STM8AF626x) || (STM8AF622x) */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Analog to Digital Converter (ADC2)
|
|
*/
|
|
#if defined(STM8S208) || defined(STM8S207) || defined (STM8S007) || defined (STM8AF52Ax) || defined (STM8AF62Ax)
|
|
typedef struct ADC2_struct
|
|
{
|
|
__IO uint8_t CSR; /*!< ADC2 control status register */
|
|
__IO uint8_t CR1; /*!< ADC2 configuration register 1 */
|
|
__IO uint8_t CR2; /*!< ADC2 configuration register 2 */
|
|
uint8_t RESERVED; /*!< Reserved byte */
|
|
__IO uint8_t DRH; /*!< ADC2 Data high */
|
|
__IO uint8_t DRL; /*!< ADC2 Data low */
|
|
__IO uint8_t TDRH; /*!< ADC2 Schmitt trigger disable register high */
|
|
__IO uint8_t TDRL; /*!< ADC2 Schmitt trigger disable register low */
|
|
}
|
|
ADC2_TypeDef;
|
|
|
|
/** @addtogroup ADC2_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
#define ADC2_CSR_RESET_VALUE ((uint8_t)0x00)
|
|
#define ADC2_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define ADC2_CR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define ADC2_TDRL_RESET_VALUE ((uint8_t)0x00)
|
|
#define ADC2_TDRH_RESET_VALUE ((uint8_t)0x00)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup ADC2_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
#define ADC2_CSR_EOC ((uint8_t)0x80) /*!< End of Conversion mask */
|
|
#define ADC2_CSR_EOCIE ((uint8_t)0x20) /*!< Interrupt Enable for EOC mask */
|
|
#define ADC2_CSR_CH ((uint8_t)0x0F) /*!< Channel selection bits mask */
|
|
|
|
#define ADC2_CR1_SPSEL ((uint8_t)0x70) /*!< Prescaler selection mask */
|
|
#define ADC2_CR1_CONT ((uint8_t)0x02) /*!< Continuous conversion mask */
|
|
#define ADC2_CR1_ADON ((uint8_t)0x01) /*!< A/D Converter on/off mask */
|
|
|
|
#define ADC2_CR2_EXTTRIG ((uint8_t)0x40) /*!< External trigger enable mask */
|
|
#define ADC2_CR2_EXTSEL ((uint8_t)0x30) /*!< External event selection mask */
|
|
#define ADC2_CR2_ALIGN ((uint8_t)0x08) /*!< Data Alignment mask */
|
|
|
|
#endif /* (STM8S208) ||(STM8S207) || defined (STM8S007) || (STM8AF62Ax) || (STM8AF52Ax) */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Auto Wake Up (AWU) peripheral registers.
|
|
*/
|
|
typedef struct AWU_struct {
|
|
__IO uint8_t CSR; /*!< AWU Control status register */
|
|
__IO uint8_t APR; /*!< AWU Asynchronous prescaler buffer */
|
|
__IO uint8_t TBR; /*!< AWU Time base selection register */
|
|
}
|
|
AWU_TypeDef;
|
|
|
|
/** @addtogroup AWU_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
#define AWU_CSR_RESET_VALUE ((uint8_t)0x00)
|
|
#define AWU_APR_RESET_VALUE ((uint8_t)0x3F)
|
|
#define AWU_TBR_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup AWU_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
|
|
#define AWU_CSR_AWUF ((uint8_t)0x20) /*!< Interrupt flag mask */
|
|
#define AWU_CSR_AWUEN ((uint8_t)0x10) /*!< Auto Wake-up enable mask */
|
|
#define AWU_CSR_MSR ((uint8_t)0x01) /*!< LSI Measurement enable mask */
|
|
|
|
#define AWU_APR_APR ((uint8_t)0x3F) /*!< Asynchronous Prescaler divider mask */
|
|
|
|
#define AWU_TBR_AWUTB ((uint8_t)0x0F) /*!< Timebase selection mask */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Beeper (BEEP) peripheral registers.
|
|
*/
|
|
|
|
typedef struct BEEP_struct {
|
|
__IO uint8_t CSR; /*!< BEEP Control status register */
|
|
}
|
|
BEEP_TypeDef;
|
|
|
|
/** @addtogroup BEEP_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
#define BEEP_CSR_RESET_VALUE ((uint8_t)0x1F)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup BEEP_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
#define BEEP_CSR_BEEPSEL ((uint8_t)0xC0) /*!< Beeper frequency selection mask */
|
|
#define BEEP_CSR_BEEPEN ((uint8_t)0x20) /*!< Beeper enable mask */
|
|
#define BEEP_CSR_BEEPDIV ((uint8_t)0x1F) /*!< Beeper Divider prescalar mask */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Clock Controller (CLK)
|
|
*/
|
|
typedef struct CLK_struct {
|
|
__IO uint8_t ICKR; /*!< Internal Clocks Control Register */
|
|
__IO uint8_t ECKR; /*!< External Clocks Control Register */
|
|
uint8_t RESERVED; /*!< Reserved byte */
|
|
__IO uint8_t CMSR; /*!< Clock Master Status Register */
|
|
__IO uint8_t SWR; /*!< Clock Master Switch Register */
|
|
__IO uint8_t SWCR; /*!< Switch Control Register */
|
|
__IO uint8_t CKDIVR; /*!< Clock Divider Register */
|
|
__IO uint8_t PCKENR1; /*!< Peripheral Clock Gating Register 1 */
|
|
__IO uint8_t CSSR; /*!< Clock Security System Register */
|
|
__IO uint8_t CCOR; /*!< Configurable Clock Output Register */
|
|
__IO uint8_t PCKENR2; /*!< Peripheral Clock Gating Register 2 */
|
|
uint8_t RESERVED1; /*!< Reserved byte */
|
|
__IO uint8_t HSITRIMR; /*!< HSI Calibration Trimmer Register */
|
|
__IO uint8_t SWIMCCR; /*!< SWIM clock control register */
|
|
} CLK_TypeDef;
|
|
|
|
/** @addtogroup CLK_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define CLK_ICKR_RESET_VALUE ((uint8_t)0x01)
|
|
#define CLK_ECKR_RESET_VALUE ((uint8_t)0x00)
|
|
#define CLK_CMSR_RESET_VALUE ((uint8_t)0xE1)
|
|
#define CLK_SWR_RESET_VALUE ((uint8_t)0xE1)
|
|
#define CLK_SWCR_RESET_VALUE ((uint8_t)0x00)
|
|
#define CLK_CKDIVR_RESET_VALUE ((uint8_t)0x18)
|
|
#define CLK_PCKENR1_RESET_VALUE ((uint8_t)0xFF)
|
|
#define CLK_PCKENR2_RESET_VALUE ((uint8_t)0xFF)
|
|
#define CLK_CSSR_RESET_VALUE ((uint8_t)0x00)
|
|
#define CLK_CCOR_RESET_VALUE ((uint8_t)0x00)
|
|
#define CLK_HSITRIMR_RESET_VALUE ((uint8_t)0x00)
|
|
#define CLK_SWIMCCR_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup CLK_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
#define CLK_ICKR_SWUAH ((uint8_t)0x20) /*!< Slow Wake-up from Active Halt/Halt modes */
|
|
#define CLK_ICKR_LSIRDY ((uint8_t)0x10) /*!< Low speed internal oscillator ready */
|
|
#define CLK_ICKR_LSIEN ((uint8_t)0x08) /*!< Low speed internal RC oscillator enable */
|
|
#define CLK_ICKR_FHWU ((uint8_t)0x04) /*!< Fast Wake-up from Active Halt/Halt mode */
|
|
#define CLK_ICKR_HSIRDY ((uint8_t)0x02) /*!< High speed internal RC oscillator ready */
|
|
#define CLK_ICKR_HSIEN ((uint8_t)0x01) /*!< High speed internal RC oscillator enable */
|
|
|
|
#define CLK_ECKR_HSERDY ((uint8_t)0x02) /*!< High speed external crystal oscillator ready */
|
|
#define CLK_ECKR_HSEEN ((uint8_t)0x01) /*!< High speed external crystal oscillator enable */
|
|
|
|
#define CLK_CMSR_CKM ((uint8_t)0xFF) /*!< Clock master status bits */
|
|
|
|
#define CLK_SWR_SWI ((uint8_t)0xFF) /*!< Clock master selection bits */
|
|
|
|
#define CLK_SWCR_SWIF ((uint8_t)0x08) /*!< Clock switch interrupt flag */
|
|
#define CLK_SWCR_SWIEN ((uint8_t)0x04) /*!< Clock switch interrupt enable */
|
|
#define CLK_SWCR_SWEN ((uint8_t)0x02) /*!< Switch start/stop */
|
|
#define CLK_SWCR_SWBSY ((uint8_t)0x01) /*!< Switch busy flag*/
|
|
|
|
#define CLK_CKDIVR_HSIDIV ((uint8_t)0x18) /*!< High speed internal clock prescaler */
|
|
#define CLK_CKDIVR_CPUDIV ((uint8_t)0x07) /*!< CPU clock prescaler */
|
|
|
|
#define CLK_PCKENR1_TIM1 ((uint8_t)0x80) /*!< Timer 1 clock enable */
|
|
#define CLK_PCKENR1_TIM3 ((uint8_t)0x40) /*!< Timer 3 clock enable */
|
|
#define CLK_PCKENR1_TIM2 ((uint8_t)0x20) /*!< Timer 2 clock enable */
|
|
#define CLK_PCKENR1_TIM5 ((uint8_t)0x20) /*!< Timer 5 clock enable */
|
|
#define CLK_PCKENR1_TIM4 ((uint8_t)0x10) /*!< Timer 4 clock enable */
|
|
#define CLK_PCKENR1_TIM6 ((uint8_t)0x10) /*!< Timer 6 clock enable */
|
|
#define CLK_PCKENR1_UART3 ((uint8_t)0x08) /*!< UART3 clock enable */
|
|
#define CLK_PCKENR1_UART2 ((uint8_t)0x08) /*!< UART2 clock enable */
|
|
#define CLK_PCKENR1_UART1 ((uint8_t)0x04) /*!< UART1 clock enable */
|
|
#define CLK_PCKENR1_SPI ((uint8_t)0x02) /*!< SPI clock enable */
|
|
#define CLK_PCKENR1_I2C ((uint8_t)0x01) /*!< I2C clock enable */
|
|
|
|
#define CLK_PCKENR2_CAN ((uint8_t)0x80) /*!< CAN clock enable */
|
|
#define CLK_PCKENR2_ADC ((uint8_t)0x08) /*!< ADC clock enable */
|
|
#define CLK_PCKENR2_AWU ((uint8_t)0x04) /*!< AWU clock enable */
|
|
|
|
#define CLK_CSSR_CSSD ((uint8_t)0x08) /*!< Clock security system detection */
|
|
#define CLK_CSSR_CSSDIE ((uint8_t)0x04) /*!< Clock security system detection interrupt enable */
|
|
#define CLK_CSSR_AUX ((uint8_t)0x02) /*!< Auxiliary oscillator connected to master clock */
|
|
#define CLK_CSSR_CSSEN ((uint8_t)0x01) /*!< Clock security system enable */
|
|
|
|
#define CLK_CCOR_CCOBSY ((uint8_t)0x40) /*!< Configurable clock output busy */
|
|
#define CLK_CCOR_CCORDY ((uint8_t)0x20) /*!< Configurable clock output ready */
|
|
#define CLK_CCOR_CCOSEL ((uint8_t)0x1E) /*!< Configurable clock output selection */
|
|
#define CLK_CCOR_CCOEN ((uint8_t)0x01) /*!< Configurable clock output enable */
|
|
|
|
#define CLK_HSITRIMR_HSITRIM ((uint8_t)0x07) /*!< High speed internal oscillator trimmer */
|
|
|
|
#define CLK_SWIMCCR_SWIMDIV ((uint8_t)0x01) /*!< SWIM Clock Dividing Factor */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief 16-bit timer with complementary PWM outputs (TIM1)
|
|
*/
|
|
|
|
typedef struct TIM1_struct {
|
|
__IO uint8_t CR1; /*!< control register 1 */
|
|
__IO uint8_t CR2; /*!< control register 2 */
|
|
__IO uint8_t SMCR; /*!< Synchro mode control register */
|
|
__IO uint8_t ETR; /*!< external trigger register */
|
|
__IO uint8_t IER; /*!< interrupt enable register*/
|
|
__IO uint8_t SR1; /*!< status register 1 */
|
|
__IO uint8_t SR2; /*!< status register 2 */
|
|
__IO uint8_t EGR; /*!< event generation register */
|
|
__IO uint8_t CCMR1; /*!< CC mode register 1 */
|
|
__IO uint8_t CCMR2; /*!< CC mode register 2 */
|
|
__IO uint8_t CCMR3; /*!< CC mode register 3 */
|
|
__IO uint8_t CCMR4; /*!< CC mode register 4 */
|
|
__IO uint8_t CCER1; /*!< CC enable register 1 */
|
|
__IO uint8_t CCER2; /*!< CC enable register 2 */
|
|
__IO uint8_t CNTRH; /*!< counter high */
|
|
__IO uint8_t CNTRL; /*!< counter low */
|
|
__IO uint8_t PSCRH; /*!< prescaler high */
|
|
__IO uint8_t PSCRL; /*!< prescaler low */
|
|
__IO uint8_t ARRH; /*!< auto-reload register high */
|
|
__IO uint8_t ARRL; /*!< auto-reload register low */
|
|
__IO uint8_t RCR; /*!< Repetition Counter register */
|
|
__IO uint8_t CCR1H; /*!< capture/compare register 1 high */
|
|
__IO uint8_t CCR1L; /*!< capture/compare register 1 low */
|
|
__IO uint8_t CCR2H; /*!< capture/compare register 2 high */
|
|
__IO uint8_t CCR2L; /*!< capture/compare register 2 low */
|
|
__IO uint8_t CCR3H; /*!< capture/compare register 3 high */
|
|
__IO uint8_t CCR3L; /*!< capture/compare register 3 low */
|
|
__IO uint8_t CCR4H; /*!< capture/compare register 3 high */
|
|
__IO uint8_t CCR4L; /*!< capture/compare register 3 low */
|
|
__IO uint8_t BKR; /*!< Break Register */
|
|
__IO uint8_t DTR; /*!< dead-time register */
|
|
__IO uint8_t OISR; /*!< Output idle register */
|
|
}
|
|
TIM1_TypeDef;
|
|
|
|
/** @addtogroup TIM1_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define TIM1_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_SMCR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_ETR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_IER_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_SR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_SR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_EGR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCMR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCMR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCMR3_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCMR4_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCER1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCER2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CNTRH_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CNTRL_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_PSCRH_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_PSCRL_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_ARRH_RESET_VALUE ((uint8_t)0xFF)
|
|
#define TIM1_ARRL_RESET_VALUE ((uint8_t)0xFF)
|
|
#define TIM1_RCR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCR1H_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCR1L_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCR2H_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCR2L_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCR3H_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCR3L_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCR4H_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_CCR4L_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_BKR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_DTR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM1_OISR_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIM1_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
/* CR1*/
|
|
#define TIM1_CR1_ARPE ((uint8_t)0x80) /*!< Auto-Reload Preload Enable mask. */
|
|
#define TIM1_CR1_CMS ((uint8_t)0x60) /*!< Center-aligned Mode Selection mask. */
|
|
#define TIM1_CR1_DIR ((uint8_t)0x10) /*!< Direction mask. */
|
|
#define TIM1_CR1_OPM ((uint8_t)0x08) /*!< One Pulse Mode mask. */
|
|
#define TIM1_CR1_URS ((uint8_t)0x04) /*!< Update Request Source mask. */
|
|
#define TIM1_CR1_UDIS ((uint8_t)0x02) /*!< Update DIsable mask. */
|
|
#define TIM1_CR1_CEN ((uint8_t)0x01) /*!< Counter Enable mask. */
|
|
/* CR2*/
|
|
#define TIM1_CR2_TI1S ((uint8_t)0x80) /*!< TI1S Selection mask. */
|
|
#define TIM1_CR2_MMS ((uint8_t)0x70) /*!< MMS Selection mask. */
|
|
#define TIM1_CR2_COMS ((uint8_t)0x04) /*!< Capture/Compare Control Update Selection mask. */
|
|
#define TIM1_CR2_CCPC ((uint8_t)0x01) /*!< Capture/Compare Preloaded Control mask. */
|
|
/* SMCR*/
|
|
#define TIM1_SMCR_MSM ((uint8_t)0x80) /*!< Master/Slave Mode mask. */
|
|
#define TIM1_SMCR_TS ((uint8_t)0x70) /*!< Trigger Selection mask. */
|
|
#define TIM1_SMCR_SMS ((uint8_t)0x07) /*!< Slave Mode Selection mask. */
|
|
/*ETR*/
|
|
#define TIM1_ETR_ETP ((uint8_t)0x80) /*!< External Trigger Polarity mask. */
|
|
#define TIM1_ETR_ECE ((uint8_t)0x40)/*!< External Clock mask. */
|
|
#define TIM1_ETR_ETPS ((uint8_t)0x30) /*!< External Trigger Prescaler mask. */
|
|
#define TIM1_ETR_ETF ((uint8_t)0x0F) /*!< External Trigger Filter mask. */
|
|
/*IER*/
|
|
#define TIM1_IER_BIE ((uint8_t)0x80) /*!< Break Interrupt Enable mask. */
|
|
#define TIM1_IER_TIE ((uint8_t)0x40) /*!< Trigger Interrupt Enable mask. */
|
|
#define TIM1_IER_COMIE ((uint8_t)0x20) /*!< Commutation Interrupt Enable mask.*/
|
|
#define TIM1_IER_CC4IE ((uint8_t)0x10) /*!< Capture/Compare 4 Interrupt Enable mask. */
|
|
#define TIM1_IER_CC3IE ((uint8_t)0x08) /*!< Capture/Compare 3 Interrupt Enable mask. */
|
|
#define TIM1_IER_CC2IE ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Enable mask. */
|
|
#define TIM1_IER_CC1IE ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Enable mask. */
|
|
#define TIM1_IER_UIE ((uint8_t)0x01) /*!< Update Interrupt Enable mask. */
|
|
/*SR1*/
|
|
#define TIM1_SR1_BIF ((uint8_t)0x80) /*!< Break Interrupt Flag mask. */
|
|
#define TIM1_SR1_TIF ((uint8_t)0x40) /*!< Trigger Interrupt Flag mask. */
|
|
#define TIM1_SR1_COMIF ((uint8_t)0x20) /*!< Commutation Interrupt Flag mask. */
|
|
#define TIM1_SR1_CC4IF ((uint8_t)0x10) /*!< Capture/Compare 4 Interrupt Flag mask. */
|
|
#define TIM1_SR1_CC3IF ((uint8_t)0x08) /*!< Capture/Compare 3 Interrupt Flag mask. */
|
|
#define TIM1_SR1_CC2IF ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Flag mask. */
|
|
#define TIM1_SR1_CC1IF ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Flag mask. */
|
|
#define TIM1_SR1_UIF ((uint8_t)0x01) /*!< Update Interrupt Flag mask. */
|
|
/*SR2*/
|
|
#define TIM1_SR2_CC4OF ((uint8_t)0x10) /*!< Capture/Compare 4 Overcapture Flag mask. */
|
|
#define TIM1_SR2_CC3OF ((uint8_t)0x08) /*!< Capture/Compare 3 Overcapture Flag mask. */
|
|
#define TIM1_SR2_CC2OF ((uint8_t)0x04) /*!< Capture/Compare 2 Overcapture Flag mask. */
|
|
#define TIM1_SR2_CC1OF ((uint8_t)0x02) /*!< Capture/Compare 1 Overcapture Flag mask. */
|
|
/*EGR*/
|
|
#define TIM1_EGR_BG ((uint8_t)0x80) /*!< Break Generation mask. */
|
|
#define TIM1_EGR_TG ((uint8_t)0x40) /*!< Trigger Generation mask. */
|
|
#define TIM1_EGR_COMG ((uint8_t)0x20) /*!< Capture/Compare Control Update Generation mask. */
|
|
#define TIM1_EGR_CC4G ((uint8_t)0x10) /*!< Capture/Compare 4 Generation mask. */
|
|
#define TIM1_EGR_CC3G ((uint8_t)0x08) /*!< Capture/Compare 3 Generation mask. */
|
|
#define TIM1_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation mask. */
|
|
#define TIM1_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation mask. */
|
|
#define TIM1_EGR_UG ((uint8_t)0x01) /*!< Update Generation mask. */
|
|
/*CCMR*/
|
|
#define TIM1_CCMR_ICxPSC ((uint8_t)0x0C) /*!< Input Capture x Prescaler mask. */
|
|
#define TIM1_CCMR_ICxF ((uint8_t)0xF0) /*!< Input Capture x Filter mask. */
|
|
#define TIM1_CCMR_OCM ((uint8_t)0x70) /*!< Output Compare x Mode mask. */
|
|
#define TIM1_CCMR_OCxPE ((uint8_t)0x08) /*!< Output Compare x Preload Enable mask. */
|
|
#define TIM1_CCMR_OCxFE ((uint8_t)0x04) /*!< Output Compare x Fast Enable mask. */
|
|
#define TIM1_CCMR_CCxS ((uint8_t)0x03) /*!< Capture/Compare x Selection mask. */
|
|
|
|
#define CCMR_TIxDirect_Set ((uint8_t)0x01)
|
|
/*CCER1*/
|
|
#define TIM1_CCER1_CC2NP ((uint8_t)0x80) /*!< Capture/Compare 2 Complementary output Polarity mask. */
|
|
#define TIM1_CCER1_CC2NE ((uint8_t)0x40) /*!< Capture/Compare 2 Complementary output enable mask. */
|
|
#define TIM1_CCER1_CC2P ((uint8_t)0x20) /*!< Capture/Compare 2 output Polarity mask. */
|
|
#define TIM1_CCER1_CC2E ((uint8_t)0x10) /*!< Capture/Compare 2 output enable mask. */
|
|
#define TIM1_CCER1_CC1NP ((uint8_t)0x08) /*!< Capture/Compare 1 Complementary output Polarity mask. */
|
|
#define TIM1_CCER1_CC1NE ((uint8_t)0x04) /*!< Capture/Compare 1 Complementary output enable mask. */
|
|
#define TIM1_CCER1_CC1P ((uint8_t)0x02) /*!< Capture/Compare 1 output Polarity mask. */
|
|
#define TIM1_CCER1_CC1E ((uint8_t)0x01) /*!< Capture/Compare 1 output enable mask. */
|
|
/*CCER2*/
|
|
#define TIM1_CCER2_CC4P ((uint8_t)0x20) /*!< Capture/Compare 4 output Polarity mask. */
|
|
#define TIM1_CCER2_CC4E ((uint8_t)0x10) /*!< Capture/Compare 4 output enable mask. */
|
|
#define TIM1_CCER2_CC3NP ((uint8_t)0x08) /*!< Capture/Compare 3 Complementary output Polarity mask. */
|
|
#define TIM1_CCER2_CC3NE ((uint8_t)0x04) /*!< Capture/Compare 3 Complementary output enable mask. */
|
|
#define TIM1_CCER2_CC3P ((uint8_t)0x02) /*!< Capture/Compare 3 output Polarity mask. */
|
|
#define TIM1_CCER2_CC3E ((uint8_t)0x01) /*!< Capture/Compare 3 output enable mask. */
|
|
/*CNTRH*/
|
|
#define TIM1_CNTRH_CNT ((uint8_t)0xFF) /*!< Counter Value (MSB) mask. */
|
|
/*CNTRL*/
|
|
#define TIM1_CNTRL_CNT ((uint8_t)0xFF) /*!< Counter Value (LSB) mask. */
|
|
/*PSCH*/
|
|
#define TIM1_PSCH_PSC ((uint8_t)0xFF) /*!< Prescaler Value (MSB) mask. */
|
|
/*PSCL*/
|
|
#define TIM1_PSCL_PSC ((uint8_t)0xFF) /*!< Prescaler Value (LSB) mask. */
|
|
/*ARR*/
|
|
#define TIM1_ARRH_ARR ((uint8_t)0xFF) /*!< Autoreload Value (MSB) mask. */
|
|
#define TIM1_ARRL_ARR ((uint8_t)0xFF) /*!< Autoreload Value (LSB) mask. */
|
|
/*RCR*/
|
|
#define TIM1_RCR_REP ((uint8_t)0xFF) /*!< Repetition Counter Value mask. */
|
|
/*CCR1*/
|
|
#define TIM1_CCR1H_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (MSB) mask. */
|
|
#define TIM1_CCR1L_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (LSB) mask. */
|
|
/*CCR2*/
|
|
#define TIM1_CCR2H_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (MSB) mask. */
|
|
#define TIM1_CCR2L_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (LSB) mask. */
|
|
/*CCR3*/
|
|
#define TIM1_CCR3H_CCR3 ((uint8_t)0xFF) /*!< Capture/Compare 3 Value (MSB) mask. */
|
|
#define TIM1_CCR3L_CCR3 ((uint8_t)0xFF) /*!< Capture/Compare 3 Value (LSB) mask. */
|
|
/*CCR4*/
|
|
#define TIM1_CCR4H_CCR4 ((uint8_t)0xFF) /*!< Capture/Compare 4 Value (MSB) mask. */
|
|
#define TIM1_CCR4L_CCR4 ((uint8_t)0xFF) /*!< Capture/Compare 4 Value (LSB) mask. */
|
|
/*BKR*/
|
|
#define TIM1_BKR_MOE ((uint8_t)0x80) /*!< Main Output Enable mask. */
|
|
#define TIM1_BKR_AOE ((uint8_t)0x40) /*!< Automatic Output Enable mask. */
|
|
#define TIM1_BKR_BKP ((uint8_t)0x20) /*!< Break Polarity mask. */
|
|
#define TIM1_BKR_BKE ((uint8_t)0x10) /*!< Break Enable mask. */
|
|
#define TIM1_BKR_OSSR ((uint8_t)0x08) /*!< Off-State Selection for Run mode mask. */
|
|
#define TIM1_BKR_OSSI ((uint8_t)0x04) /*!< Off-State Selection for Idle mode mask. */
|
|
#define TIM1_BKR_LOCK ((uint8_t)0x03) /*!< Lock Configuration mask. */
|
|
/*DTR*/
|
|
#define TIM1_DTR_DTG ((uint8_t)0xFF) /*!< Dead-Time Generator set-up mask. */
|
|
/*OISR*/
|
|
#define TIM1_OISR_OIS4 ((uint8_t)0x40) /*!< Output Idle state 4 (OC4 output) mask. */
|
|
#define TIM1_OISR_OIS3N ((uint8_t)0x20) /*!< Output Idle state 3 (OC3N output) mask. */
|
|
#define TIM1_OISR_OIS3 ((uint8_t)0x10) /*!< Output Idle state 3 (OC3 output) mask. */
|
|
#define TIM1_OISR_OIS2N ((uint8_t)0x08) /*!< Output Idle state 2 (OC2N output) mask. */
|
|
#define TIM1_OISR_OIS2 ((uint8_t)0x04) /*!< Output Idle state 2 (OC2 output) mask. */
|
|
#define TIM1_OISR_OIS1N ((uint8_t)0x02) /*!< Output Idle state 1 (OC1N output) mask. */
|
|
#define TIM1_OISR_OIS1 ((uint8_t)0x01) /*!< Output Idle state 1 (OC1 output) mask. */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief 16-bit timer (TIM2)
|
|
*/
|
|
|
|
typedef struct TIM2_struct {
|
|
__IO uint8_t CR1; /*!< control register 1 */
|
|
#if defined(STM8S103) || defined(STM8S003)
|
|
uint8_t RESERVED1; /*!< Reserved register */
|
|
uint8_t RESERVED2; /*!< Reserved register */
|
|
#endif
|
|
__IO uint8_t IER; /*!< interrupt enable register */
|
|
__IO uint8_t SR1; /*!< status register 1 */
|
|
__IO uint8_t SR2; /*!< status register 2 */
|
|
__IO uint8_t EGR; /*!< event generation register */
|
|
__IO uint8_t CCMR1; /*!< CC mode register 1 */
|
|
__IO uint8_t CCMR2; /*!< CC mode register 2 */
|
|
__IO uint8_t CCMR3; /*!< CC mode register 3 */
|
|
__IO uint8_t CCER1; /*!< CC enable register 1 */
|
|
__IO uint8_t CCER2; /*!< CC enable register 2 */
|
|
__IO uint8_t CNTRH; /*!< counter high */
|
|
__IO uint8_t CNTRL; /*!< counter low */
|
|
__IO uint8_t PSCR; /*!< prescaler register */
|
|
__IO uint8_t ARRH; /*!< auto-reload register high */
|
|
__IO uint8_t ARRL; /*!< auto-reload register low */
|
|
__IO uint8_t CCR1H; /*!< capture/compare register 1 high */
|
|
__IO uint8_t CCR1L; /*!< capture/compare register 1 low */
|
|
__IO uint8_t CCR2H; /*!< capture/compare register 2 high */
|
|
__IO uint8_t CCR2L; /*!< capture/compare register 2 low */
|
|
__IO uint8_t CCR3H; /*!< capture/compare register 3 high */
|
|
__IO uint8_t CCR3L; /*!< capture/compare register 3 low */
|
|
}
|
|
TIM2_TypeDef;
|
|
|
|
/** @addtogroup TIM2_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define TIM2_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_IER_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_SR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_SR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_EGR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_CCMR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_CCMR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_CCMR3_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_CCER1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_CCER2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_CNTRH_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_CNTRL_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_PSCR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_ARRH_RESET_VALUE ((uint8_t)0xFF)
|
|
#define TIM2_ARRL_RESET_VALUE ((uint8_t)0xFF)
|
|
#define TIM2_CCR1H_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_CCR1L_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_CCR2H_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_CCR2L_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_CCR3H_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM2_CCR3L_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIM2_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
/*CR1*/
|
|
#define TIM2_CR1_ARPE ((uint8_t)0x80) /*!< Auto-Reload Preload Enable mask. */
|
|
#define TIM2_CR1_OPM ((uint8_t)0x08) /*!< One Pulse Mode mask. */
|
|
#define TIM2_CR1_URS ((uint8_t)0x04) /*!< Update Request Source mask. */
|
|
#define TIM2_CR1_UDIS ((uint8_t)0x02) /*!< Update DIsable mask. */
|
|
#define TIM2_CR1_CEN ((uint8_t)0x01) /*!< Counter Enable mask. */
|
|
/*IER*/
|
|
#define TIM2_IER_CC3IE ((uint8_t)0x08) /*!< Capture/Compare 3 Interrupt Enable mask. */
|
|
#define TIM2_IER_CC2IE ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Enable mask. */
|
|
#define TIM2_IER_CC1IE ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Enable mask. */
|
|
#define TIM2_IER_UIE ((uint8_t)0x01) /*!< Update Interrupt Enable mask. */
|
|
/*SR1*/
|
|
#define TIM2_SR1_CC3IF ((uint8_t)0x08) /*!< Capture/Compare 3 Interrupt Flag mask. */
|
|
#define TIM2_SR1_CC2IF ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Flag mask. */
|
|
#define TIM2_SR1_CC1IF ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Flag mask. */
|
|
#define TIM2_SR1_UIF ((uint8_t)0x01) /*!< Update Interrupt Flag mask. */
|
|
/*SR2*/
|
|
#define TIM2_SR2_CC3OF ((uint8_t)0x08) /*!< Capture/Compare 3 Overcapture Flag mask. */
|
|
#define TIM2_SR2_CC2OF ((uint8_t)0x04) /*!< Capture/Compare 2 Overcapture Flag mask. */
|
|
#define TIM2_SR2_CC1OF ((uint8_t)0x02) /*!< Capture/Compare 1 Overcapture Flag mask. */
|
|
/*EGR*/
|
|
#define TIM2_EGR_CC3G ((uint8_t)0x08) /*!< Capture/Compare 3 Generation mask. */
|
|
#define TIM2_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation mask. */
|
|
#define TIM2_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation mask. */
|
|
#define TIM2_EGR_UG ((uint8_t)0x01) /*!< Update Generation mask. */
|
|
/*CCMR*/
|
|
#define TIM2_CCMR_ICxPSC ((uint8_t)0x0C) /*!< Input Capture x Prescaler mask. */
|
|
#define TIM2_CCMR_ICxF ((uint8_t)0xF0) /*!< Input Capture x Filter mask. */
|
|
#define TIM2_CCMR_OCM ((uint8_t)0x70) /*!< Output Compare x Mode mask. */
|
|
#define TIM2_CCMR_OCxPE ((uint8_t)0x08) /*!< Output Compare x Preload Enable mask. */
|
|
#define TIM2_CCMR_CCxS ((uint8_t)0x03) /*!< Capture/Compare x Selection mask. */
|
|
/*CCER1*/
|
|
#define TIM2_CCER1_CC2P ((uint8_t)0x20) /*!< Capture/Compare 2 output Polarity mask. */
|
|
#define TIM2_CCER1_CC2E ((uint8_t)0x10) /*!< Capture/Compare 2 output enable mask. */
|
|
#define TIM2_CCER1_CC1P ((uint8_t)0x02) /*!< Capture/Compare 1 output Polarity mask. */
|
|
#define TIM2_CCER1_CC1E ((uint8_t)0x01) /*!< Capture/Compare 1 output enable mask. */
|
|
/*CCER2*/
|
|
#define TIM2_CCER2_CC3P ((uint8_t)0x02) /*!< Capture/Compare 3 output Polarity mask. */
|
|
#define TIM2_CCER2_CC3E ((uint8_t)0x01) /*!< Capture/Compare 3 output enable mask. */
|
|
/*CNTR*/
|
|
#define TIM2_CNTRH_CNT ((uint8_t)0xFF) /*!< Counter Value (MSB) mask. */
|
|
#define TIM2_CNTRL_CNT ((uint8_t)0xFF) /*!< Counter Value (LSB) mask. */
|
|
/*PSCR*/
|
|
#define TIM2_PSCR_PSC ((uint8_t)0xFF) /*!< Prescaler Value (MSB) mask. */
|
|
/*ARR*/
|
|
#define TIM2_ARRH_ARR ((uint8_t)0xFF) /*!< Autoreload Value (MSB) mask. */
|
|
#define TIM2_ARRL_ARR ((uint8_t)0xFF) /*!< Autoreload Value (LSB) mask. */
|
|
/*CCR1*/
|
|
#define TIM2_CCR1H_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (MSB) mask. */
|
|
#define TIM2_CCR1L_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (LSB) mask. */
|
|
/*CCR2*/
|
|
#define TIM2_CCR2H_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (MSB) mask. */
|
|
#define TIM2_CCR2L_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (LSB) mask. */
|
|
/*CCR3*/
|
|
#define TIM2_CCR3H_CCR3 ((uint8_t)0xFF) /*!< Capture/Compare 3 Value (MSB) mask. */
|
|
#define TIM2_CCR3L_CCR3 ((uint8_t)0xFF) /*!< Capture/Compare 3 Value (LSB) mask. */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief 16-bit timer (TIM3)
|
|
*/
|
|
typedef struct TIM3_struct {
|
|
__IO uint8_t CR1; /*!< control register 1 */
|
|
__IO uint8_t IER; /*!< interrupt enable register */
|
|
__IO uint8_t SR1; /*!< status register 1 */
|
|
__IO uint8_t SR2; /*!< status register 2 */
|
|
__IO uint8_t EGR; /*!< event generation register */
|
|
__IO uint8_t CCMR1; /*!< CC mode register 1 */
|
|
__IO uint8_t CCMR2; /*!< CC mode register 2 */
|
|
__IO uint8_t CCER1; /*!< CC enable register 1 */
|
|
__IO uint8_t CNTRH; /*!< counter high */
|
|
__IO uint8_t CNTRL; /*!< counter low */
|
|
__IO uint8_t PSCR; /*!< prescaler register */
|
|
__IO uint8_t ARRH; /*!< auto-reload register high */
|
|
__IO uint8_t ARRL; /*!< auto-reload register low */
|
|
__IO uint8_t CCR1H; /*!< capture/compare register 1 high */
|
|
__IO uint8_t CCR1L; /*!< capture/compare register 1 low */
|
|
__IO uint8_t CCR2H; /*!< capture/compare register 2 high */
|
|
__IO uint8_t CCR2L; /*!< capture/compare register 2 low */
|
|
}
|
|
TIM3_TypeDef;
|
|
|
|
/** @addtogroup TIM3_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define TIM3_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_IER_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_SR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_SR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_EGR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_CCMR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_CCMR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_CCER1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_CNTRH_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_CNTRL_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_PSCR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_ARRH_RESET_VALUE ((uint8_t)0xFF)
|
|
#define TIM3_ARRL_RESET_VALUE ((uint8_t)0xFF)
|
|
#define TIM3_CCR1H_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_CCR1L_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_CCR2H_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM3_CCR2L_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIM3_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
/*CR1*/
|
|
#define TIM3_CR1_ARPE ((uint8_t)0x80) /*!< Auto-Reload Preload Enable mask. */
|
|
#define TIM3_CR1_OPM ((uint8_t)0x08) /*!< One Pulse Mode mask. */
|
|
#define TIM3_CR1_URS ((uint8_t)0x04) /*!< Update Request Source mask. */
|
|
#define TIM3_CR1_UDIS ((uint8_t)0x02) /*!< Update DIsable mask. */
|
|
#define TIM3_CR1_CEN ((uint8_t)0x01) /*!< Counter Enable mask. */
|
|
/*IER*/
|
|
#define TIM3_IER_CC2IE ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Enable mask. */
|
|
#define TIM3_IER_CC1IE ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Enable mask. */
|
|
#define TIM3_IER_UIE ((uint8_t)0x01) /*!< Update Interrupt Enable mask. */
|
|
/*SR1*/
|
|
#define TIM3_SR1_CC2IF ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Flag mask. */
|
|
#define TIM3_SR1_CC1IF ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Flag mask. */
|
|
#define TIM3_SR1_UIF ((uint8_t)0x01) /*!< Update Interrupt Flag mask. */
|
|
/*SR2*/
|
|
#define TIM3_SR2_CC2OF ((uint8_t)0x04) /*!< Capture/Compare 2 Overcapture Flag mask. */
|
|
#define TIM3_SR2_CC1OF ((uint8_t)0x02) /*!< Capture/Compare 1 Overcapture Flag mask. */
|
|
/*EGR*/
|
|
#define TIM3_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation mask. */
|
|
#define TIM3_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation mask. */
|
|
#define TIM3_EGR_UG ((uint8_t)0x01) /*!< Update Generation mask. */
|
|
/*CCMR*/
|
|
#define TIM3_CCMR_ICxPSC ((uint8_t)0x0C) /*!< Input Capture x Prescaler mask. */
|
|
#define TIM3_CCMR_ICxF ((uint8_t)0xF0) /*!< Input Capture x Filter mask. */
|
|
#define TIM3_CCMR_OCM ((uint8_t)0x70) /*!< Output Compare x Mode mask. */
|
|
#define TIM3_CCMR_OCxPE ((uint8_t)0x08) /*!< Output Compare x Preload Enable mask. */
|
|
#define TIM3_CCMR_CCxS ((uint8_t)0x03) /*!< Capture/Compare x Selection mask. */
|
|
/*CCER1*/
|
|
#define TIM3_CCER1_CC2P ((uint8_t)0x20) /*!< Capture/Compare 2 output Polarity mask. */
|
|
#define TIM3_CCER1_CC2E ((uint8_t)0x10) /*!< Capture/Compare 2 output enable mask. */
|
|
#define TIM3_CCER1_CC1P ((uint8_t)0x02) /*!< Capture/Compare 1 output Polarity mask. */
|
|
#define TIM3_CCER1_CC1E ((uint8_t)0x01) /*!< Capture/Compare 1 output enable mask. */
|
|
/*CNTR*/
|
|
#define TIM3_CNTRH_CNT ((uint8_t)0xFF) /*!< Counter Value (MSB) mask. */
|
|
#define TIM3_CNTRL_CNT ((uint8_t)0xFF) /*!< Counter Value (LSB) mask. */
|
|
/*PSCR*/
|
|
#define TIM3_PSCR_PSC ((uint8_t)0xFF) /*!< Prescaler Value (MSB) mask. */
|
|
/*ARR*/
|
|
#define TIM3_ARRH_ARR ((uint8_t)0xFF) /*!< Autoreload Value (MSB) mask. */
|
|
#define TIM3_ARRL_ARR ((uint8_t)0xFF) /*!< Autoreload Value (LSB) mask. */
|
|
/*CCR1*/
|
|
#define TIM3_CCR1H_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (MSB) mask. */
|
|
#define TIM3_CCR1L_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (LSB) mask. */
|
|
/*CCR2*/
|
|
#define TIM3_CCR2H_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (MSB) mask. */
|
|
#define TIM3_CCR2L_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (LSB) mask. */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief 8-bit system timer (TIM4)
|
|
*/
|
|
|
|
typedef struct TIM4_struct {
|
|
__IO uint8_t CR1; /*!< control register 1 */
|
|
#if defined(STM8S103) || defined(STM8S003)
|
|
uint8_t RESERVED1; /*!< Reserved register */
|
|
uint8_t RESERVED2; /*!< Reserved register */
|
|
#endif
|
|
__IO uint8_t IER; /*!< interrupt enable register */
|
|
__IO uint8_t SR1; /*!< status register 1 */
|
|
__IO uint8_t EGR; /*!< event generation register */
|
|
__IO uint8_t CNTR; /*!< counter register */
|
|
__IO uint8_t PSCR; /*!< prescaler register */
|
|
__IO uint8_t ARR; /*!< auto-reload register */
|
|
}
|
|
TIM4_TypeDef;
|
|
|
|
/** @addtogroup TIM4_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define TIM4_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM4_IER_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM4_SR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM4_EGR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM4_CNTR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM4_PSCR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM4_ARR_RESET_VALUE ((uint8_t)0xFF)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIM4_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
/*CR1*/
|
|
#define TIM4_CR1_ARPE ((uint8_t)0x80) /*!< Auto-Reload Preload Enable mask. */
|
|
#define TIM4_CR1_OPM ((uint8_t)0x08) /*!< One Pulse Mode mask. */
|
|
#define TIM4_CR1_URS ((uint8_t)0x04) /*!< Update Request Source mask. */
|
|
#define TIM4_CR1_UDIS ((uint8_t)0x02) /*!< Update DIsable mask. */
|
|
#define TIM4_CR1_CEN ((uint8_t)0x01) /*!< Counter Enable mask. */
|
|
/*IER*/
|
|
#define TIM4_IER_UIE ((uint8_t)0x01) /*!< Update Interrupt Enable mask. */
|
|
/*SR1*/
|
|
#define TIM4_SR1_UIF ((uint8_t)0x01) /*!< Update Interrupt Flag mask. */
|
|
/*EGR*/
|
|
#define TIM4_EGR_UG ((uint8_t)0x01) /*!< Update Generation mask. */
|
|
/*CNTR*/
|
|
#define TIM4_CNTR_CNT ((uint8_t)0xFF) /*!< Counter Value (LSB) mask. */
|
|
/*PSCR*/
|
|
#define TIM4_PSCR_PSC ((uint8_t)0x07) /*!< Prescaler Value mask. */
|
|
/*ARR*/
|
|
#define TIM4_ARR_ARR ((uint8_t)0xFF) /*!< Autoreload Value mask. */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief 16-bit timer with synchro module (TIM5)
|
|
*/
|
|
|
|
typedef struct TIM5_struct {
|
|
__IO uint8_t CR1; /*!<TIM5 Control Register 1 */
|
|
__IO uint8_t CR2; /*!<TIM5 Control Register 2 */
|
|
__IO uint8_t SMCR; /*!<TIM5 Slave Mode Control Register */
|
|
__IO uint8_t IER; /*!<TIM5 Interrupt Enable Register */
|
|
__IO uint8_t SR1; /*!<TIM5 Status Register 1 */
|
|
__IO uint8_t SR2; /*!<TIM5 Status Register 2 */
|
|
__IO uint8_t EGR; /*!<TIM5 Event Generation Register */
|
|
__IO uint8_t CCMR1; /*!<TIM5 Capture/Compare Mode Register 1 */
|
|
__IO uint8_t CCMR2; /*!<TIM5 Capture/Compare Mode Register 2 */
|
|
__IO uint8_t CCMR3; /*!<TIM5 Capture/Compare Mode Register 3 */
|
|
__IO uint8_t CCER1; /*!<TIM5 Capture/Compare Enable Register 1 */
|
|
__IO uint8_t CCER2; /*!<TIM5 Capture/Compare Enable Register 2 */
|
|
__IO uint8_t CNTRH; /*!<TIM5 Counter High */
|
|
__IO uint8_t CNTRL; /*!<TIM5 Counter Low */
|
|
__IO uint8_t PSCR; /*!<TIM5 Prescaler Register */
|
|
__IO uint8_t ARRH; /*!<TIM5 Auto-Reload Register High */
|
|
__IO uint8_t ARRL; /*!<TIM5 Auto-Reload Register Low */
|
|
__IO uint8_t CCR1H; /*!<TIM5 Capture/Compare Register 1 High */
|
|
__IO uint8_t CCR1L; /*!<TIM5 Capture/Compare Register 1 Low */
|
|
__IO uint8_t CCR2H; /*!<TIM5 Capture/Compare Register 2 High */
|
|
__IO uint8_t CCR2L; /*!<TIM5 Capture/Compare Register 2 Low */
|
|
__IO uint8_t CCR3H; /*!<TIM5 Capture/Compare Register 3 High */
|
|
__IO uint8_t CCR3L; /*!<TIM5 Capture/Compare Register 3 Low */
|
|
} TIM5_TypeDef;
|
|
|
|
/** @addtogroup TIM5_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define TIM5_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_CR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_SMCR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_IER_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_SR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_SR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_EGR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_CCMR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_CCMR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_CCMR3_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_CCER1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_CCER2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_CNTRH_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_CNTRL_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_PSCR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_ARRH_RESET_VALUE ((uint8_t)0xFF)
|
|
#define TIM5_ARRL_RESET_VALUE ((uint8_t)0xFF)
|
|
#define TIM5_CCR1H_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_CCR1L_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_CCR2H_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_CCR2L_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_CCR3H_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM5_CCR3L_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIM5_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
/* CR1*/
|
|
#define TIM5_CR1_ARPE ((uint8_t)0x80) /*!< Auto-Reload Preload Enable mask. */
|
|
#define TIM5_CR1_OPM ((uint8_t)0x08) /*!< One Pulse Mode mask. */
|
|
#define TIM5_CR1_URS ((uint8_t)0x04) /*!< Update Request Source mask. */
|
|
#define TIM5_CR1_UDIS ((uint8_t)0x02) /*!< Update DIsable mask. */
|
|
#define TIM5_CR1_CEN ((uint8_t)0x01) /*!< Counter Enable mask. */
|
|
/* CR2*/
|
|
#define TIM5_CR2_TI1S ((uint8_t)0x80) /*!< TI1S Selection Mask. */
|
|
#define TIM5_CR2_MMS ((uint8_t)0x70) /*!< MMS Selection Mask. */
|
|
/* SMCR*/
|
|
#define TIM5_SMCR_MSM ((uint8_t)0x80) /*!< Master/Slave Mode Mask. */
|
|
#define TIM5_SMCR_TS ((uint8_t)0x70) /*!< Trigger Selection Mask. */
|
|
#define TIM5_SMCR_SMS ((uint8_t)0x07) /*!< Slave Mode Selection Mask. */
|
|
/*IER*/
|
|
#define TIM5_IER_TIE ((uint8_t)0x40) /*!< Trigger Interrupt Enable mask. */
|
|
#define TIM5_IER_CC3IE ((uint8_t)0x08) /*!< Capture/Compare 3 Interrupt Enable mask. */
|
|
#define TIM5_IER_CC2IE ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Enable mask. */
|
|
#define TIM5_IER_CC1IE ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Enable mask. */
|
|
#define TIM5_IER_UIE ((uint8_t)0x01) /*!< Update Interrupt Enable mask. */
|
|
/*SR1*/
|
|
#define TIM5_SR1_TIF ((uint8_t)0x40) /*!< Trigger Interrupt Flag mask. */
|
|
#define TIM5_SR1_CC3IF ((uint8_t)0x08) /*!< Capture/Compare 3 Interrupt Flag mask. */
|
|
#define TIM5_SR1_CC2IF ((uint8_t)0x04) /*!< Capture/Compare 2 Interrupt Flag mask. */
|
|
#define TIM5_SR1_CC1IF ((uint8_t)0x02) /*!< Capture/Compare 1 Interrupt Flag mask. */
|
|
#define TIM5_SR1_UIF ((uint8_t)0x01) /*!< Update Interrupt Flag mask. */
|
|
/*SR2*/
|
|
#define TIM5_SR2_CC3OF ((uint8_t)0x08) /*!< Capture/Compare 3 Overcapture Flag mask. */
|
|
#define TIM5_SR2_CC2OF ((uint8_t)0x04) /*!< Capture/Compare 2 Overcapture Flag mask. */
|
|
#define TIM5_SR2_CC1OF ((uint8_t)0x02) /*!< Capture/Compare 1 Overcapture Flag mask. */
|
|
/*EGR*/
|
|
#define TIM5_EGR_TG ((uint8_t)0x40) /*!< Trigger Generation mask. */
|
|
#define TIM5_EGR_CC3G ((uint8_t)0x08) /*!< Capture/Compare 3 Generation mask. */
|
|
#define TIM5_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation mask. */
|
|
#define TIM5_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation mask. */
|
|
#define TIM5_EGR_UG ((uint8_t)0x01) /*!< Update Generation mask. */
|
|
/*CCMR*/
|
|
#define TIM5_CCMR_ICxPSC ((uint8_t)0x0C) /*!< Input Capture x Prescaler mask. */
|
|
#define TIM5_CCMR_ICxF ((uint8_t)0xF0) /*!< Input Capture x Filter mask. */
|
|
#define TIM5_CCMR_OCM ((uint8_t)0x70) /*!< Output Compare x Mode mask. */
|
|
#define TIM5_CCMR_OCxPE ((uint8_t)0x08) /*!< Output Compare x Preload Enable mask. */
|
|
#define TIM5_CCMR_CCxS ((uint8_t)0x03) /*!< Capture/Compare x Selection mask. */
|
|
/*CCER1*/
|
|
#define TIM5_CCER1_CC2P ((uint8_t)0x20) /*!< Capture/Compare 2 output Polarity mask. */
|
|
#define TIM5_CCER1_CC2E ((uint8_t)0x10) /*!< Capture/Compare 2 output enable mask. */
|
|
#define TIM5_CCER1_CC1P ((uint8_t)0x02) /*!< Capture/Compare 1 output Polarity mask. */
|
|
#define TIM5_CCER1_CC1E ((uint8_t)0x01) /*!< Capture/Compare 1 output enable mask. */
|
|
/*CCER2*/
|
|
#define TIM5_CCER2_CC3P ((uint8_t)0x02) /*!< Capture/Compare 3 output Polarity mask. */
|
|
#define TIM5_CCER2_CC3E ((uint8_t)0x01) /*!< Capture/Compare 3 output enable mask. */
|
|
/*CNTR*/
|
|
#define TIM5_CNTRH_CNT ((uint8_t)0xFF) /*!< Counter Value (MSB) mask. */
|
|
#define TIM5_CNTRL_CNT ((uint8_t)0xFF) /*!< Counter Value (LSB) mask. */
|
|
/*PSCR*/
|
|
#define TIM5_PSCR_PSC ((uint8_t)0xFF) /*!< Prescaler Value (MSB) mask. */
|
|
/*ARR*/
|
|
#define TIM5_ARRH_ARR ((uint8_t)0xFF) /*!< Autoreload Value (MSB) mask. */
|
|
#define TIM5_ARRL_ARR ((uint8_t)0xFF) /*!< Autoreload Value (LSB) mask. */
|
|
/*CCR1*/
|
|
#define TIM5_CCR1H_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (MSB) mask. */
|
|
#define TIM5_CCR1L_CCR1 ((uint8_t)0xFF) /*!< Capture/Compare 1 Value (LSB) mask. */
|
|
/*CCR2*/
|
|
#define TIM5_CCR2H_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (MSB) mask. */
|
|
#define TIM5_CCR2L_CCR2 ((uint8_t)0xFF) /*!< Capture/Compare 2 Value (LSB) mask. */
|
|
/*CCR3*/
|
|
#define TIM5_CCR3H_CCR3 ((uint8_t)0xFF) /*!< Capture/Compare 3 Value (MSB) mask. */
|
|
#define TIM5_CCR3L_CCR3 ((uint8_t)0xFF) /*!< Capture/Compare 3 Value (LSB) mask. */
|
|
/*CCMR*/
|
|
#define TIM5_CCMR_TIxDirect_Set ((uint8_t)0x01)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief 8-bit system timer with synchro module(TIM6)
|
|
*/
|
|
|
|
typedef struct TIM6_struct {
|
|
__IO uint8_t CR1; /*!< control register 1 */
|
|
__IO uint8_t CR2; /*!< control register 2 */
|
|
__IO uint8_t SMCR; /*!< Synchro mode control register */
|
|
__IO uint8_t IER; /*!< interrupt enable register */
|
|
__IO uint8_t SR1; /*!< status register 1 */
|
|
__IO uint8_t EGR; /*!< event generation register */
|
|
__IO uint8_t CNTR; /*!< counter register */
|
|
__IO uint8_t PSCR; /*!< prescaler register */
|
|
__IO uint8_t ARR; /*!< auto-reload register */
|
|
}
|
|
TIM6_TypeDef;
|
|
/** @addtogroup TIM6_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
#define TIM6_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM6_CR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM6_SMCR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM6_IER_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM6_SR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM6_EGR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM6_CNTR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM6_PSCR_RESET_VALUE ((uint8_t)0x00)
|
|
#define TIM6_ARR_RESET_VALUE ((uint8_t)0xFF)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup TIM6_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
/* CR1*/
|
|
#define TIM6_CR1_ARPE ((uint8_t)0x80) /*!< Auto-Reload Preload Enable Mask. */
|
|
#define TIM6_CR1_OPM ((uint8_t)0x08) /*!< One Pulse Mode Mask. */
|
|
#define TIM6_CR1_URS ((uint8_t)0x04) /*!< Update Request Source Mask. */
|
|
#define TIM6_CR1_UDIS ((uint8_t)0x02) /*!< Update DIsable Mask. */
|
|
#define TIM6_CR1_CEN ((uint8_t)0x01) /*!< Counter Enable Mask. */
|
|
/* CR2*/
|
|
#define TIM6_CR2_MMS ((uint8_t)0x70) /*!< MMS Selection Mask. */
|
|
/* SMCR*/
|
|
#define TIM6_SMCR_MSM ((uint8_t)0x80) /*!< Master/Slave Mode Mask. */
|
|
#define TIM6_SMCR_TS ((uint8_t)0x70) /*!< Trigger Selection Mask. */
|
|
#define TIM6_SMCR_SMS ((uint8_t)0x07) /*!< Slave Mode Selection Mask. */
|
|
/* IER*/
|
|
#define TIM6_IER_TIE ((uint8_t)0x40) /*!< Trigger Interrupt Enable Mask. */
|
|
#define TIM6_IER_UIE ((uint8_t)0x01) /*!< Update Interrupt Enable Mask. */
|
|
/* SR1*/
|
|
#define TIM6_SR1_TIF ((uint8_t)0x40) /*!< Trigger Interrupt Flag mask. */
|
|
#define TIM6_SR1_UIF ((uint8_t)0x01) /*!< Update Interrupt Flag Mask. */
|
|
/* EGR*/
|
|
#define TIM6_EGR_TG ((uint8_t)0x40) /*!< Trigger Generation mask. */
|
|
#define TIM6_EGR_UG ((uint8_t)0x01) /*!< Update Generation Mask. */
|
|
/* CNTR*/
|
|
#define TIM6_CNTR_CNT ((uint8_t)0xFF) /*!<Counter Value (LSB) Mask. */
|
|
/* PSCR*/
|
|
#define TIM6_PSCR_PSC ((uint8_t)0x07) /*!<Prescaler Value Mask. */
|
|
|
|
#define TIM6_ARR_ARR ((uint8_t)0xFF) /*!<Autoreload Value Mask. */
|
|
/**
|
|
* @}
|
|
*/
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Inter-Integrated Circuit (I2C)
|
|
*/
|
|
|
|
typedef struct I2C_struct {
|
|
__IO uint8_t CR1; /*!< I2C control register 1 */
|
|
__IO uint8_t CR2; /*!< I2C control register 2 */
|
|
__IO uint8_t FREQR; /*!< I2C frequency register */
|
|
__IO uint8_t OARL; /*!< I2C own address register LSB */
|
|
__IO uint8_t OARH; /*!< I2C own address register MSB */
|
|
uint8_t RESERVED1; /*!< Reserved byte */
|
|
__IO uint8_t DR; /*!< I2C data register */
|
|
__IO uint8_t SR1; /*!< I2C status register 1 */
|
|
__IO uint8_t SR2; /*!< I2C status register 2 */
|
|
__IO uint8_t SR3; /*!< I2C status register 3 */
|
|
__IO uint8_t ITR; /*!< I2C interrupt register */
|
|
__IO uint8_t CCRL; /*!< I2C clock control register low */
|
|
__IO uint8_t CCRH; /*!< I2C clock control register high */
|
|
__IO uint8_t TRISER; /*!< I2C maximum rise time register */
|
|
uint8_t RESERVED2; /*!< Reserved byte */
|
|
}
|
|
I2C_TypeDef;
|
|
|
|
/** @addtogroup I2C_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define I2C_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define I2C_CR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define I2C_FREQR_RESET_VALUE ((uint8_t)0x00)
|
|
#define I2C_OARL_RESET_VALUE ((uint8_t)0x00)
|
|
#define I2C_OARH_RESET_VALUE ((uint8_t)0x00)
|
|
#define I2C_DR_RESET_VALUE ((uint8_t)0x00)
|
|
#define I2C_SR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define I2C_SR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define I2C_SR3_RESET_VALUE ((uint8_t)0x00)
|
|
#define I2C_ITR_RESET_VALUE ((uint8_t)0x00)
|
|
#define I2C_CCRL_RESET_VALUE ((uint8_t)0x00)
|
|
#define I2C_CCRH_RESET_VALUE ((uint8_t)0x00)
|
|
#define I2C_TRISER_RESET_VALUE ((uint8_t)0x02)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup I2C_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
|
|
#define I2C_CR1_NOSTRETCH ((uint8_t)0x80) /*!< Clock Stretching Disable (Slave mode) */
|
|
#define I2C_CR1_ENGC ((uint8_t)0x40) /*!< General Call Enable */
|
|
#define I2C_CR1_PE ((uint8_t)0x01) /*!< Peripheral Enable */
|
|
|
|
#define I2C_CR2_SWRST ((uint8_t)0x80) /*!< Software Reset */
|
|
#define I2C_CR2_POS ((uint8_t)0x08) /*!< Acknowledge */
|
|
#define I2C_CR2_ACK ((uint8_t)0x04) /*!< Acknowledge Enable */
|
|
#define I2C_CR2_STOP ((uint8_t)0x02) /*!< Stop Generation */
|
|
#define I2C_CR2_START ((uint8_t)0x01) /*!< Start Generation */
|
|
|
|
#define I2C_FREQR_FREQ ((uint8_t)0x3F) /*!< Peripheral Clock Frequency */
|
|
|
|
#define I2C_OARL_ADD ((uint8_t)0xFE) /*!< Interface Address bits [7..1] */
|
|
#define I2C_OARL_ADD0 ((uint8_t)0x01) /*!< Interface Address bit0 */
|
|
|
|
#define I2C_OARH_ADDMODE ((uint8_t)0x80) /*!< Addressing Mode (Slave mode) */
|
|
#define I2C_OARH_ADDCONF ((uint8_t)0x40) /*!< Address Mode Configuration */
|
|
#define I2C_OARH_ADD ((uint8_t)0x06) /*!< Interface Address bits [9..8] */
|
|
|
|
#define I2C_DR_DR ((uint8_t)0xFF) /*!< Data Register */
|
|
|
|
#define I2C_SR1_TXE ((uint8_t)0x80) /*!< Data Register Empty (transmitters) */
|
|
#define I2C_SR1_RXNE ((uint8_t)0x40) /*!< Data Register not Empty (receivers) */
|
|
#define I2C_SR1_STOPF ((uint8_t)0x10) /*!< Stop detection (Slave mode) */
|
|
#define I2C_SR1_ADD10 ((uint8_t)0x08) /*!< 10-bit header sent (Master mode) */
|
|
#define I2C_SR1_BTF ((uint8_t)0x04) /*!< Byte Transfer Finished */
|
|
#define I2C_SR1_ADDR ((uint8_t)0x02) /*!< Address sent (master mode)/matched (slave mode) */
|
|
#define I2C_SR1_SB ((uint8_t)0x01) /*!< Start Bit (Master mode) */
|
|
|
|
#define I2C_SR2_WUFH ((uint8_t)0x20) /*!< Wake-up from Halt */
|
|
#define I2C_SR2_OVR ((uint8_t)0x08) /*!< Overrun/Underrun */
|
|
#define I2C_SR2_AF ((uint8_t)0x04) /*!< Acknowledge Failure */
|
|
#define I2C_SR2_ARLO ((uint8_t)0x02) /*!< Arbitration Lost (master mode) */
|
|
#define I2C_SR2_BERR ((uint8_t)0x01) /*!< Bus Error */
|
|
|
|
#define I2C_SR3_GENCALL ((uint8_t)0x10) /*!< General Call Header (Slave mode) */
|
|
#define I2C_SR3_TRA ((uint8_t)0x04) /*!< Transmitter/Receiver */
|
|
#define I2C_SR3_BUSY ((uint8_t)0x02) /*!< Bus Busy */
|
|
#define I2C_SR3_MSL ((uint8_t)0x01) /*!< Master/Slave */
|
|
|
|
#define I2C_ITR_ITBUFEN ((uint8_t)0x04) /*!< Buffer Interrupt Enable */
|
|
#define I2C_ITR_ITEVTEN ((uint8_t)0x02) /*!< Event Interrupt Enable */
|
|
#define I2C_ITR_ITERREN ((uint8_t)0x01) /*!< Error Interrupt Enable */
|
|
|
|
#define I2C_CCRL_CCR ((uint8_t)0xFF) /*!< Clock Control Register (Master mode) */
|
|
|
|
#define I2C_CCRH_FS ((uint8_t)0x80) /*!< Master Mode Selection */
|
|
#define I2C_CCRH_DUTY ((uint8_t)0x40) /*!< Fast Mode Duty Cycle */
|
|
#define I2C_CCRH_CCR ((uint8_t)0x0F) /*!< Clock Control Register in Fast/Standard mode (Master mode) bits [11..8] */
|
|
|
|
#define I2C_TRISER_TRISE ((uint8_t)0x3F) /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Interrupt Controller (ITC)
|
|
*/
|
|
|
|
typedef struct ITC_struct {
|
|
__IO uint8_t ISPR1; /*!< Interrupt Software Priority register 1 */
|
|
__IO uint8_t ISPR2; /*!< Interrupt Software Priority register 2 */
|
|
__IO uint8_t ISPR3; /*!< Interrupt Software Priority register 3 */
|
|
__IO uint8_t ISPR4; /*!< Interrupt Software Priority register 4 */
|
|
__IO uint8_t ISPR5; /*!< Interrupt Software Priority register 5 */
|
|
__IO uint8_t ISPR6; /*!< Interrupt Software Priority register 6 */
|
|
__IO uint8_t ISPR7; /*!< Interrupt Software Priority register 7 */
|
|
__IO uint8_t ISPR8; /*!< Interrupt Software Priority register 8 */
|
|
}
|
|
ITC_TypeDef;
|
|
|
|
/** @addtogroup ITC_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define ITC_SPRX_RESET_VALUE ((uint8_t)0xFF) /*!< Reset value of Software Priority registers */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup CPU_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
|
|
#define CPU_CC_I1I0 ((uint8_t)0x28) /*!< Condition Code register, I1 and I0 bits mask */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief External Interrupt Controller (EXTI)
|
|
*/
|
|
|
|
typedef struct EXTI_struct {
|
|
__IO uint8_t CR1; /*!< External Interrupt Control Register for PORTA to PORTD */
|
|
__IO uint8_t CR2; /*!< External Interrupt Control Register for PORTE and TLI */
|
|
}
|
|
EXTI_TypeDef;
|
|
|
|
/** @addtogroup EXTI_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define EXTI_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define EXTI_CR2_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup EXTI_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
|
|
#define EXTI_CR1_PDIS ((uint8_t)0xC0) /*!< PORTD external interrupt sensitivity bits mask */
|
|
#define EXTI_CR1_PCIS ((uint8_t)0x30) /*!< PORTC external interrupt sensitivity bits mask */
|
|
#define EXTI_CR1_PBIS ((uint8_t)0x0C) /*!< PORTB external interrupt sensitivity bits mask */
|
|
#define EXTI_CR1_PAIS ((uint8_t)0x03) /*!< PORTA external interrupt sensitivity bits mask */
|
|
|
|
#define EXTI_CR2_TLIS ((uint8_t)0x04) /*!< Top level interrupt sensitivity bit mask */
|
|
#define EXTI_CR2_PEIS ((uint8_t)0x03) /*!< PORTE external interrupt sensitivity bits mask */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief FLASH program and Data memory (FLASH)
|
|
*/
|
|
|
|
typedef struct FLASH_struct {
|
|
__IO uint8_t CR1; /*!< Flash control register 1 */
|
|
__IO uint8_t CR2; /*!< Flash control register 2 */
|
|
__IO uint8_t NCR2; /*!< Flash complementary control register 2 */
|
|
__IO uint8_t FPR; /*!< Flash protection register */
|
|
__IO uint8_t NFPR; /*!< Flash complementary protection register */
|
|
__IO uint8_t IAPSR; /*!< Flash in-application programming status register */
|
|
uint8_t RESERVED1; /*!< Reserved byte */
|
|
uint8_t RESERVED2; /*!< Reserved byte */
|
|
__IO uint8_t PUKR; /*!< Flash program memory unprotection register */
|
|
uint8_t RESERVED3; /*!< Reserved byte */
|
|
__IO uint8_t DUKR; /*!< Data EEPROM unprotection register */
|
|
}
|
|
FLASH_TypeDef;
|
|
|
|
/** @addtogroup FLASH_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define FLASH_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define FLASH_CR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define FLASH_NCR2_RESET_VALUE ((uint8_t)0xFF)
|
|
#define FLASH_IAPSR_RESET_VALUE ((uint8_t)0x40)
|
|
#define FLASH_PUKR_RESET_VALUE ((uint8_t)0x00)
|
|
#define FLASH_DUKR_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup FLASH_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
|
|
#define FLASH_CR1_HALT ((uint8_t)0x08) /*!< Standby in Halt mode mask */
|
|
#define FLASH_CR1_AHALT ((uint8_t)0x04) /*!< Standby in Active Halt mode mask */
|
|
#define FLASH_CR1_IE ((uint8_t)0x02) /*!< Flash Interrupt enable mask */
|
|
#define FLASH_CR1_FIX ((uint8_t)0x01) /*!< Fix programming time mask */
|
|
|
|
#define FLASH_CR2_OPT ((uint8_t)0x80) /*!< Select option byte mask */
|
|
#define FLASH_CR2_WPRG ((uint8_t)0x40) /*!< Word Programming mask */
|
|
#define FLASH_CR2_ERASE ((uint8_t)0x20) /*!< Erase block mask */
|
|
#define FLASH_CR2_FPRG ((uint8_t)0x10) /*!< Fast programming mode mask */
|
|
#define FLASH_CR2_PRG ((uint8_t)0x01) /*!< Program block mask */
|
|
|
|
#define FLASH_NCR2_NOPT ((uint8_t)0x80) /*!< Select option byte mask */
|
|
#define FLASH_NCR2_NWPRG ((uint8_t)0x40) /*!< Word Programming mask */
|
|
#define FLASH_NCR2_NERASE ((uint8_t)0x20) /*!< Erase block mask */
|
|
#define FLASH_NCR2_NFPRG ((uint8_t)0x10) /*!< Fast programming mode mask */
|
|
#define FLASH_NCR2_NPRG ((uint8_t)0x01) /*!< Program block mask */
|
|
|
|
#define FLASH_IAPSR_HVOFF ((uint8_t)0x40) /*!< End of high voltage flag mask */
|
|
#define FLASH_IAPSR_DUL ((uint8_t)0x08) /*!< Data EEPROM unlocked flag mask */
|
|
#define FLASH_IAPSR_EOP ((uint8_t)0x04) /*!< End of operation flag mask */
|
|
#define FLASH_IAPSR_PUL ((uint8_t)0x02) /*!< Flash Program memory unlocked flag mask */
|
|
#define FLASH_IAPSR_WR_PG_DIS ((uint8_t)0x01) /*!< Write attempted to protected page mask */
|
|
|
|
#define FLASH_PUKR_PUK ((uint8_t)0xFF) /*!< Flash Program memory unprotection mask */
|
|
|
|
#define FLASH_DUKR_DUK ((uint8_t)0xFF) /*!< Data EEPROM unprotection mask */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Option Bytes (OPT)
|
|
*/
|
|
typedef struct OPT_struct {
|
|
__IO uint8_t OPT0; /*!< Option byte 0: Read-out protection (not accessible in IAP mode) */
|
|
__IO uint8_t OPT1; /*!< Option byte 1: User boot code */
|
|
__IO uint8_t NOPT1; /*!< Complementary Option byte 1 */
|
|
__IO uint8_t OPT2; /*!< Option byte 2: Alternate function remapping */
|
|
__IO uint8_t NOPT2; /*!< Complementary Option byte 2 */
|
|
__IO uint8_t OPT3; /*!< Option byte 3: Watchdog option */
|
|
__IO uint8_t NOPT3; /*!< Complementary Option byte 3 */
|
|
__IO uint8_t OPT4; /*!< Option byte 4: Clock option */
|
|
__IO uint8_t NOPT4; /*!< Complementary Option byte 4 */
|
|
__IO uint8_t OPT5; /*!< Option byte 5: HSE clock startup */
|
|
__IO uint8_t NOPT5; /*!< Complementary Option byte 5 */
|
|
uint8_t RESERVED1; /*!< Reserved Option byte*/
|
|
uint8_t RESERVED2; /*!< Reserved Option byte*/
|
|
__IO uint8_t OPT7; /*!< Option byte 7: flash wait states */
|
|
__IO uint8_t NOPT7; /*!< Complementary Option byte 7 */
|
|
}
|
|
OPT_TypeDef;
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Independent Watchdog (IWDG)
|
|
*/
|
|
|
|
typedef struct IWDG_struct {
|
|
__IO uint8_t KR; /*!< Key Register */
|
|
__IO uint8_t PR; /*!< Prescaler Register */
|
|
__IO uint8_t RLR; /*!< Reload Register */
|
|
}
|
|
IWDG_TypeDef;
|
|
|
|
/** @addtogroup IWDG_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define IWDG_PR_RESET_VALUE ((uint8_t)0x00)
|
|
#define IWDG_RLR_RESET_VALUE ((uint8_t)0xFF)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Window Watchdog (WWDG)
|
|
*/
|
|
|
|
typedef struct WWDG_struct {
|
|
__IO uint8_t CR; /*!< Control Register */
|
|
__IO uint8_t WR; /*!< Window Register */
|
|
}
|
|
WWDG_TypeDef;
|
|
|
|
/** @addtogroup WWDG_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define WWDG_CR_RESET_VALUE ((uint8_t)0x7F)
|
|
#define WWDG_WR_RESET_VALUE ((uint8_t)0x7F)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup WWDG_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
|
|
#define WWDG_CR_WDGA ((uint8_t)0x80) /*!< WDGA bit mask */
|
|
#define WWDG_CR_T6 ((uint8_t)0x40) /*!< T6 bit mask */
|
|
#define WWDG_CR_T ((uint8_t)0x7F) /*!< T bits mask */
|
|
|
|
#define WWDG_WR_MSB ((uint8_t)0x80) /*!< MSB bit mask */
|
|
#define WWDG_WR_W ((uint8_t)0x7F) /*!< W bits mask */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Reset Controller (RST)
|
|
*/
|
|
|
|
typedef struct RST_struct {
|
|
__IO uint8_t SR; /*!< Reset status register */
|
|
}
|
|
RST_TypeDef;
|
|
|
|
/** @addtogroup RST_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
|
|
#define RST_SR_EMCF ((uint8_t)0x10) /*!< EMC reset flag bit mask */
|
|
#define RST_SR_SWIMF ((uint8_t)0x08) /*!< SWIM reset flag bit mask */
|
|
#define RST_SR_ILLOPF ((uint8_t)0x04) /*!< Illegal opcode reset flag bit mask */
|
|
#define RST_SR_IWDGF ((uint8_t)0x02) /*!< IWDG reset flag bit mask */
|
|
#define RST_SR_WWDGF ((uint8_t)0x01) /*!< WWDG reset flag bit mask */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Serial Peripheral Interface (SPI)
|
|
*/
|
|
|
|
typedef struct SPI_struct {
|
|
__IO uint8_t CR1; /*!< SPI control register 1 */
|
|
__IO uint8_t CR2; /*!< SPI control register 2 */
|
|
__IO uint8_t ICR; /*!< SPI interrupt control register */
|
|
__IO uint8_t SR; /*!< SPI status register */
|
|
__IO uint8_t DR; /*!< SPI data I/O register */
|
|
__IO uint8_t CRCPR; /*!< SPI CRC polynomial register */
|
|
__IO uint8_t RXCRCR; /*!< SPI Rx CRC register */
|
|
__IO uint8_t TXCRCR; /*!< SPI Tx CRC register */
|
|
}
|
|
SPI_TypeDef;
|
|
|
|
/** @addtogroup SPI_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define SPI_CR1_RESET_VALUE ((uint8_t)0x00) /*!< Control Register 1 reset value */
|
|
#define SPI_CR2_RESET_VALUE ((uint8_t)0x00) /*!< Control Register 2 reset value */
|
|
#define SPI_ICR_RESET_VALUE ((uint8_t)0x00) /*!< Interrupt Control Register reset value */
|
|
#define SPI_SR_RESET_VALUE ((uint8_t)0x02) /*!< Status Register reset value */
|
|
#define SPI_DR_RESET_VALUE ((uint8_t)0x00) /*!< Data Register reset value */
|
|
#define SPI_CRCPR_RESET_VALUE ((uint8_t)0x07) /*!< Polynomial Register reset value */
|
|
#define SPI_RXCRCR_RESET_VALUE ((uint8_t)0x00) /*!< RX CRC Register reset value */
|
|
#define SPI_TXCRCR_RESET_VALUE ((uint8_t)0x00) /*!< TX CRC Register reset value */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup SPI_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
|
|
#define SPI_CR1_LSBFIRST ((uint8_t)0x80) /*!< Frame format mask */
|
|
#define SPI_CR1_SPE ((uint8_t)0x40) /*!< Enable bits mask */
|
|
#define SPI_CR1_BR ((uint8_t)0x38) /*!< Baud rate control mask */
|
|
#define SPI_CR1_MSTR ((uint8_t)0x04) /*!< Master Selection mask */
|
|
#define SPI_CR1_CPOL ((uint8_t)0x02) /*!< Clock Polarity mask */
|
|
#define SPI_CR1_CPHA ((uint8_t)0x01) /*!< Clock Phase mask */
|
|
|
|
#define SPI_CR2_BDM ((uint8_t)0x80) /*!< Bi-directional data mode enable mask */
|
|
#define SPI_CR2_BDOE ((uint8_t)0x40) /*!< Output enable in bi-directional mode mask */
|
|
#define SPI_CR2_CRCEN ((uint8_t)0x20) /*!< Hardware CRC calculation enable mask */
|
|
#define SPI_CR2_CRCNEXT ((uint8_t)0x10) /*!< Transmit CRC next mask */
|
|
#define SPI_CR2_RXONLY ((uint8_t)0x04) /*!< Receive only mask */
|
|
#define SPI_CR2_SSM ((uint8_t)0x02) /*!< Software slave management mask */
|
|
#define SPI_CR2_SSI ((uint8_t)0x01) /*!< Internal slave select mask */
|
|
|
|
#define SPI_ICR_TXEI ((uint8_t)0x80) /*!< Tx buffer empty interrupt enable mask */
|
|
#define SPI_ICR_RXEI ((uint8_t)0x40) /*!< Rx buffer empty interrupt enable mask */
|
|
#define SPI_ICR_ERRIE ((uint8_t)0x20) /*!< Error interrupt enable mask */
|
|
#define SPI_ICR_WKIE ((uint8_t)0x10) /*!< Wake-up interrupt enable mask */
|
|
|
|
#define SPI_SR_BSY ((uint8_t)0x80) /*!< Busy flag */
|
|
#define SPI_SR_OVR ((uint8_t)0x40) /*!< Overrun flag */
|
|
#define SPI_SR_MODF ((uint8_t)0x20) /*!< Mode fault */
|
|
#define SPI_SR_CRCERR ((uint8_t)0x10) /*!< CRC error flag */
|
|
#define SPI_SR_WKUP ((uint8_t)0x08) /*!< Wake-Up flag */
|
|
#define SPI_SR_TXE ((uint8_t)0x02) /*!< Transmit buffer empty */
|
|
#define SPI_SR_RXNE ((uint8_t)0x01) /*!< Receive buffer not empty */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Universal Synchronous Asynchronous Receiver Transmitter (UART1)
|
|
*/
|
|
|
|
typedef struct UART1_struct {
|
|
__IO uint8_t SR; /*!< UART1 status register */
|
|
__IO uint8_t DR; /*!< UART1 data register */
|
|
__IO uint8_t BRR1; /*!< UART1 baud rate register */
|
|
__IO uint8_t BRR2; /*!< UART1 DIV mantissa[11:8] SCIDIV fraction */
|
|
__IO uint8_t CR1; /*!< UART1 control register 1 */
|
|
__IO uint8_t CR2; /*!< UART1 control register 2 */
|
|
__IO uint8_t CR3; /*!< UART1 control register 3 */
|
|
__IO uint8_t CR4; /*!< UART1 control register 4 */
|
|
__IO uint8_t CR5; /*!< UART1 control register 5 */
|
|
__IO uint8_t GTR; /*!< UART1 guard time register */
|
|
__IO uint8_t PSCR; /*!< UART1 prescaler register */
|
|
}
|
|
UART1_TypeDef;
|
|
|
|
/** @addtogroup UART1_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define UART1_SR_RESET_VALUE ((uint8_t)0xC0)
|
|
#define UART1_BRR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART1_BRR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART1_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART1_CR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART1_CR3_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART1_CR4_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART1_CR5_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART1_GTR_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART1_PSCR_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup UART1_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
|
|
#define UART1_SR_TXE ((uint8_t)0x80) /*!< Transmit Data Register Empty mask */
|
|
#define UART1_SR_TC ((uint8_t)0x40) /*!< Transmission Complete mask */
|
|
#define UART1_SR_RXNE ((uint8_t)0x20) /*!< Read Data Register Not Empty mask */
|
|
#define UART1_SR_IDLE ((uint8_t)0x10) /*!< IDLE line detected mask */
|
|
#define UART1_SR_OR ((uint8_t)0x08) /*!< OverRun error mask */
|
|
#define UART1_SR_NF ((uint8_t)0x04) /*!< Noise Flag mask */
|
|
#define UART1_SR_FE ((uint8_t)0x02) /*!< Framing Error mask */
|
|
#define UART1_SR_PE ((uint8_t)0x01) /*!< Parity Error mask */
|
|
|
|
#define UART1_BRR1_DIVM ((uint8_t)0xFF) /*!< LSB mantissa of UART1DIV [7:0] mask */
|
|
|
|
#define UART1_BRR2_DIVM ((uint8_t)0xF0) /*!< MSB mantissa of UART1DIV [11:8] mask */
|
|
#define UART1_BRR2_DIVF ((uint8_t)0x0F) /*!< Fraction bits of UART1DIV [3:0] mask */
|
|
|
|
#define UART1_CR1_R8 ((uint8_t)0x80) /*!< Receive Data bit 8 */
|
|
#define UART1_CR1_T8 ((uint8_t)0x40) /*!< Transmit data bit 8 */
|
|
#define UART1_CR1_UARTD ((uint8_t)0x20) /*!< UART1 Disable (for low power consumption) */
|
|
#define UART1_CR1_M ((uint8_t)0x10) /*!< Word length mask */
|
|
#define UART1_CR1_WAKE ((uint8_t)0x08) /*!< Wake-up method mask */
|
|
#define UART1_CR1_PCEN ((uint8_t)0x04) /*!< Parity Control Enable mask */
|
|
#define UART1_CR1_PS ((uint8_t)0x02) /*!< UART1 Parity Selection */
|
|
#define UART1_CR1_PIEN ((uint8_t)0x01) /*!< UART1 Parity Interrupt Enable mask */
|
|
|
|
#define UART1_CR2_TIEN ((uint8_t)0x80) /*!< Transmitter Interrupt Enable mask */
|
|
#define UART1_CR2_TCIEN ((uint8_t)0x40) /*!< Transmission Complete Interrupt Enable mask */
|
|
#define UART1_CR2_RIEN ((uint8_t)0x20) /*!< Receiver Interrupt Enable mask */
|
|
#define UART1_CR2_ILIEN ((uint8_t)0x10) /*!< IDLE Line Interrupt Enable mask */
|
|
#define UART1_CR2_TEN ((uint8_t)0x08) /*!< Transmitter Enable mask */
|
|
#define UART1_CR2_REN ((uint8_t)0x04) /*!< Receiver Enable mask */
|
|
#define UART1_CR2_RWU ((uint8_t)0x02) /*!< Receiver Wake-Up mask */
|
|
#define UART1_CR2_SBK ((uint8_t)0x01) /*!< Send Break mask */
|
|
|
|
#define UART1_CR3_LINEN ((uint8_t)0x40) /*!< Alternate Function output mask */
|
|
#define UART1_CR3_STOP ((uint8_t)0x30) /*!< STOP bits [1:0] mask */
|
|
#define UART1_CR3_CKEN ((uint8_t)0x08) /*!< Clock Enable mask */
|
|
#define UART1_CR3_CPOL ((uint8_t)0x04) /*!< Clock Polarity mask */
|
|
#define UART1_CR3_CPHA ((uint8_t)0x02) /*!< Clock Phase mask */
|
|
#define UART1_CR3_LBCL ((uint8_t)0x01) /*!< Last Bit Clock pulse mask */
|
|
|
|
#define UART1_CR4_LBDIEN ((uint8_t)0x40) /*!< LIN Break Detection Interrupt Enable mask */
|
|
#define UART1_CR4_LBDL ((uint8_t)0x20) /*!< LIN Break Detection Length mask */
|
|
#define UART1_CR4_LBDF ((uint8_t)0x10) /*!< LIN Break Detection Flag mask */
|
|
#define UART1_CR4_ADD ((uint8_t)0x0F) /*!< Address of the UART1 node mask */
|
|
|
|
#define UART1_CR5_SCEN ((uint8_t)0x20) /*!< Smart Card Enable mask */
|
|
#define UART1_CR5_NACK ((uint8_t)0x10) /*!< Smart Card Nack Enable mask */
|
|
#define UART1_CR5_HDSEL ((uint8_t)0x08) /*!< Half-Duplex Selection mask */
|
|
#define UART1_CR5_IRLP ((uint8_t)0x04) /*!< Irda Low Power Selection mask */
|
|
#define UART1_CR5_IREN ((uint8_t)0x02) /*!< Irda Enable mask */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Universal Synchronous Asynchronous Receiver Transmitter (UART2)
|
|
*/
|
|
|
|
typedef struct UART2_struct {
|
|
__IO uint8_t SR; /*!< UART1 status register */
|
|
__IO uint8_t DR; /*!< UART1 data register */
|
|
__IO uint8_t BRR1; /*!< UART1 baud rate register */
|
|
__IO uint8_t BRR2; /*!< UART1 DIV mantissa[11:8] SCIDIV fraction */
|
|
__IO uint8_t CR1; /*!< UART1 control register 1 */
|
|
__IO uint8_t CR2; /*!< UART1 control register 2 */
|
|
__IO uint8_t CR3; /*!< UART1 control register 3 */
|
|
__IO uint8_t CR4; /*!< UART1 control register 4 */
|
|
__IO uint8_t CR5; /*!< UART1 control register 5 */
|
|
__IO uint8_t CR6; /*!< UART1 control register 6 */
|
|
__IO uint8_t GTR; /*!< UART1 guard time register */
|
|
__IO uint8_t PSCR; /*!< UART1 prescaler register */
|
|
}
|
|
UART2_TypeDef;
|
|
|
|
/** @addtogroup UART2_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define UART2_SR_RESET_VALUE ((uint8_t)0xC0)
|
|
#define UART2_BRR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART2_BRR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART2_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART2_CR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART2_CR3_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART2_CR4_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART2_CR5_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART2_CR6_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART2_GTR_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART2_PSCR_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup UART2_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
|
|
#define UART2_SR_TXE ((uint8_t)0x80) /*!< Transmit Data Register Empty mask */
|
|
#define UART2_SR_TC ((uint8_t)0x40) /*!< Transmission Complete mask */
|
|
#define UART2_SR_RXNE ((uint8_t)0x20) /*!< Read Data Register Not Empty mask */
|
|
#define UART2_SR_IDLE ((uint8_t)0x10) /*!< IDLE line detected mask */
|
|
#define UART2_SR_OR ((uint8_t)0x08) /*!< OverRun error mask */
|
|
#define UART2_SR_NF ((uint8_t)0x04) /*!< Noise Flag mask */
|
|
#define UART2_SR_FE ((uint8_t)0x02) /*!< Framing Error mask */
|
|
#define UART2_SR_PE ((uint8_t)0x01) /*!< Parity Error mask */
|
|
|
|
#define UART2_BRR1_DIVM ((uint8_t)0xFF) /*!< LSB mantissa of UART2DIV [7:0] mask */
|
|
|
|
#define UART2_BRR2_DIVM ((uint8_t)0xF0) /*!< MSB mantissa of UART2DIV [11:8] mask */
|
|
#define UART2_BRR2_DIVF ((uint8_t)0x0F) /*!< Fraction bits of UART2DIV [3:0] mask */
|
|
|
|
#define UART2_CR1_R8 ((uint8_t)0x80) /*!< Receive Data bit 8 */
|
|
#define UART2_CR1_T8 ((uint8_t)0x40) /*!< Transmit data bit 8 */
|
|
#define UART2_CR1_UARTD ((uint8_t)0x20) /*!< UART2 Disable (for low power consumption) */
|
|
#define UART2_CR1_M ((uint8_t)0x10) /*!< Word length mask */
|
|
#define UART2_CR1_WAKE ((uint8_t)0x08) /*!< Wake-up method mask */
|
|
#define UART2_CR1_PCEN ((uint8_t)0x04) /*!< Parity Control Enable mask */
|
|
#define UART2_CR1_PS ((uint8_t)0x02) /*!< UART2 Parity Selection */
|
|
#define UART2_CR1_PIEN ((uint8_t)0x01) /*!< UART2 Parity Interrupt Enable mask */
|
|
|
|
#define UART2_CR2_TIEN ((uint8_t)0x80) /*!< Transmitter Interrupt Enable mask */
|
|
#define UART2_CR2_TCIEN ((uint8_t)0x40) /*!< Transmission Complete Interrupt Enable mask */
|
|
#define UART2_CR2_RIEN ((uint8_t)0x20) /*!< Receiver Interrupt Enable mask */
|
|
#define UART2_CR2_ILIEN ((uint8_t)0x10) /*!< IDLE Line Interrupt Enable mask */
|
|
#define UART2_CR2_TEN ((uint8_t)0x08) /*!< Transmitter Enable mask */
|
|
#define UART2_CR2_REN ((uint8_t)0x04) /*!< Receiver Enable mask */
|
|
#define UART2_CR2_RWU ((uint8_t)0x02) /*!< Receiver Wake-Up mask */
|
|
#define UART2_CR2_SBK ((uint8_t)0x01) /*!< Send Break mask */
|
|
|
|
#define UART2_CR3_LINEN ((uint8_t)0x40) /*!< Alternate Function output mask */
|
|
#define UART2_CR3_STOP ((uint8_t)0x30) /*!< STOP bits [1:0] mask */
|
|
#define UART2_CR3_CKEN ((uint8_t)0x08) /*!< Clock Enable mask */
|
|
#define UART2_CR3_CPOL ((uint8_t)0x04) /*!< Clock Polarity mask */
|
|
#define UART2_CR3_CPHA ((uint8_t)0x02) /*!< Clock Phase mask */
|
|
#define UART2_CR3_LBCL ((uint8_t)0x01) /*!< Last Bit Clock pulse mask */
|
|
|
|
#define UART2_CR4_LBDIEN ((uint8_t)0x40) /*!< LIN Break Detection Interrupt Enable mask */
|
|
#define UART2_CR4_LBDL ((uint8_t)0x20) /*!< LIN Break Detection Length mask */
|
|
#define UART2_CR4_LBDF ((uint8_t)0x10) /*!< LIN Break Detection Flag mask */
|
|
#define UART2_CR4_ADD ((uint8_t)0x0F) /*!< Address of the UART2 node mask */
|
|
|
|
#define UART2_CR5_SCEN ((uint8_t)0x20) /*!< Smart Card Enable mask */
|
|
#define UART2_CR5_NACK ((uint8_t)0x10) /*!< Smart Card Nack Enable mask */
|
|
#define UART2_CR5_IRLP ((uint8_t)0x04) /*!< Irda Low Power Selection mask */
|
|
#define UART2_CR5_IREN ((uint8_t)0x02) /*!< Irda Enable mask */
|
|
|
|
#define UART2_CR6_LDUM ((uint8_t)0x80) /*!< LIN Divider Update Method */
|
|
#define UART2_CR6_LSLV ((uint8_t)0x20) /*!< LIN Slave Enable */
|
|
#define UART2_CR6_LASE ((uint8_t)0x10) /*!< LIN Auto synchronization Enable */
|
|
#define UART2_CR6_LHDIEN ((uint8_t)0x04) /*!< LIN Header Detection Interrupt Enable */
|
|
#define UART2_CR6_LHDF ((uint8_t)0x02) /*!< LIN Header Detection Flag */
|
|
#define UART2_CR6_LSF ((uint8_t)0x01) /*!< LIN Synch Field */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief LIN Universal Asynchronous Receiver Transmitter (UART3)
|
|
*/
|
|
|
|
typedef struct UART3_struct {
|
|
__IO uint8_t SR; /*!< status register */
|
|
__IO uint8_t DR; /*!< data register */
|
|
__IO uint8_t BRR1; /*!< baud rate register */
|
|
__IO uint8_t BRR2; /*!< DIV mantissa[11:8] SCIDIV fraction */
|
|
__IO uint8_t CR1; /*!< control register 1 */
|
|
__IO uint8_t CR2; /*!< control register 2 */
|
|
__IO uint8_t CR3; /*!< control register 3 */
|
|
__IO uint8_t CR4; /*!< control register 4 */
|
|
uint8_t RESERVED; /*!< Reserved byte */
|
|
__IO uint8_t CR6; /*!< control register 5 */
|
|
}
|
|
UART3_TypeDef;
|
|
|
|
/** @addtogroup UART3_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define UART3_SR_RESET_VALUE ((uint8_t)0xC0)
|
|
#define UART3_BRR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART3_BRR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART3_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART3_CR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART3_CR3_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART3_CR4_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART3_CR6_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup UART3_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
|
|
#define UART3_SR_TXE ((uint8_t)0x80) /*!< Transmit Data Register Empty mask */
|
|
#define UART3_SR_TC ((uint8_t)0x40) /*!< Transmission Complete mask */
|
|
#define UART3_SR_RXNE ((uint8_t)0x20) /*!< Read Data Register Not Empty mask */
|
|
#define UART3_SR_IDLE ((uint8_t)0x10) /*!< IDLE line detected mask */
|
|
#define UART3_SR_OR ((uint8_t)0x08) /*!< OverRun error mask */
|
|
#define UART3_SR_NF ((uint8_t)0x04) /*!< Noise Flag mask */
|
|
#define UART3_SR_FE ((uint8_t)0x02) /*!< Framing Error mask */
|
|
#define UART3_SR_PE ((uint8_t)0x01) /*!< Parity Error mask */
|
|
|
|
#define UART3_BRR1_DIVM ((uint8_t)0xFF) /*!< LSB mantissa of UARTDIV [7:0] mask */
|
|
|
|
#define UART3_BRR2_DIVM ((uint8_t)0xF0) /*!< MSB mantissa of UARTDIV [11:8] mask */
|
|
#define UART3_BRR2_DIVF ((uint8_t)0x0F) /*!< Fraction bits of UARTDIV [3:0] mask */
|
|
|
|
#define UART3_CR1_R8 ((uint8_t)0x80) /*!< Receive Data bit 8 */
|
|
#define UART3_CR1_T8 ((uint8_t)0x40) /*!< Transmit data bit 8 */
|
|
#define UART3_CR1_UARTD ((uint8_t)0x20) /*!< UART Disable (for low power consumption) */
|
|
#define UART3_CR1_M ((uint8_t)0x10) /*!< Word length mask */
|
|
#define UART3_CR1_WAKE ((uint8_t)0x08) /*!< Wake-up method mask */
|
|
#define UART3_CR1_PCEN ((uint8_t)0x04) /*!< Parity control enable mask */
|
|
#define UART3_CR1_PS ((uint8_t)0x02) /*!< Parity selection bit mask */
|
|
#define UART3_CR1_PIEN ((uint8_t)0x01) /*!< Parity interrupt enable bit mask */
|
|
|
|
#define UART3_CR2_TIEN ((uint8_t)0x80) /*!< Transmitter Interrupt Enable mask */
|
|
#define UART3_CR2_TCIEN ((uint8_t)0x40) /*!< Transmission Complete Interrupt Enable mask */
|
|
#define UART3_CR2_RIEN ((uint8_t)0x20) /*!< Receiver Interrupt Enable mask */
|
|
#define UART3_CR2_ILIEN ((uint8_t)0x10) /*!< IDLE Line Interrupt Enable mask */
|
|
#define UART3_CR2_TEN ((uint8_t)0x08) /*!< Transmitter Enable mask */
|
|
#define UART3_CR2_REN ((uint8_t)0x04) /*!< Receiver Enable mask */
|
|
#define UART3_CR2_RWU ((uint8_t)0x02) /*!< Receiver Wake-Up mask */
|
|
#define UART3_CR2_SBK ((uint8_t)0x01) /*!< Send Break mask */
|
|
|
|
#define UART3_CR3_LINEN ((uint8_t)0x40) /*!< Alternate Function output mask */
|
|
#define UART3_CR3_STOP ((uint8_t)0x30) /*!< STOP bits [1:0] mask */
|
|
|
|
#define UART3_CR4_LBDIEN ((uint8_t)0x40) /*!< LIN Break Detection Interrupt Enable mask */
|
|
#define UART3_CR4_LBDL ((uint8_t)0x20) /*!< LIN Break Detection Length mask */
|
|
#define UART3_CR4_LBDF ((uint8_t)0x10) /*!< LIN Break Detection Flag mask */
|
|
#define UART3_CR4_ADD ((uint8_t)0x0F) /*!< Address of the UART3 node mask */
|
|
|
|
#define UART3_CR6_LDUM ((uint8_t)0x80) /*!< LIN Divider Update Method */
|
|
#define UART3_CR6_LSLV ((uint8_t)0x20) /*!< LIN Slave Enable */
|
|
#define UART3_CR6_LASE ((uint8_t)0x10) /*!< LIN Auto synchronization Enable */
|
|
#define UART3_CR6_LHDIEN ((uint8_t)0x04) /*!< LIN Header Detection Interrupt Enable */
|
|
#define UART3_CR6_LHDF ((uint8_t)0x02) /*!< LIN Header Detection Flag */
|
|
#define UART3_CR6_LSF ((uint8_t)0x01) /*!< LIN Synch Field */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Universal Synchronous Asynchronous Receiver Transmitter (UART4)
|
|
*/
|
|
#if defined(STM8AF622x)
|
|
typedef struct UART4_struct
|
|
{
|
|
__IO uint8_t SR; /*!< UART4 status register */
|
|
__IO uint8_t DR; /*!< UART4 data register */
|
|
__IO uint8_t BRR1; /*!< UART4 baud rate register */
|
|
__IO uint8_t BRR2; /*!< UART4 DIV mantissa[11:8] SCIDIV fraction */
|
|
__IO uint8_t CR1; /*!< UART4 control register 1 */
|
|
__IO uint8_t CR2; /*!< UART4 control register 2 */
|
|
__IO uint8_t CR3; /*!< UART4 control register 3 */
|
|
__IO uint8_t CR4; /*!< UART4 control register 4 */
|
|
__IO uint8_t CR5; /*!< UART4 control register 5 */
|
|
__IO uint8_t CR6; /*!< UART4 control register 6 */
|
|
__IO uint8_t GTR; /*!< UART4 guard time register */
|
|
__IO uint8_t PSCR; /*!< UART4 prescaler register */
|
|
}
|
|
UART4_TypeDef;
|
|
|
|
/** @addtogroup UART4_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define UART4_SR_RESET_VALUE ((uint8_t)0xC0)
|
|
#define UART4_BRR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART4_BRR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART4_CR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART4_CR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART4_CR3_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART4_CR4_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART4_CR5_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART4_CR6_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART4_GTR_RESET_VALUE ((uint8_t)0x00)
|
|
#define UART4_PSCR_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup UART4_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
|
|
#define UART4_SR_TXE ((uint8_t)0x80) /*!< Transmit Data Register Empty mask */
|
|
#define UART4_SR_TC ((uint8_t)0x40) /*!< Transmission Complete mask */
|
|
#define UART4_SR_RXNE ((uint8_t)0x20) /*!< Read Data Register Not Empty mask */
|
|
#define UART4_SR_IDLE ((uint8_t)0x10) /*!< IDLE line detected mask */
|
|
#define UART4_SR_OR ((uint8_t)0x08) /*!< OverRun error mask */
|
|
#define UART4_SR_NF ((uint8_t)0x04) /*!< Noise Flag mask */
|
|
#define UART4_SR_FE ((uint8_t)0x02) /*!< Framing Error mask */
|
|
#define UART4_SR_PE ((uint8_t)0x01) /*!< Parity Error mask */
|
|
|
|
#define UART4_BRR1_DIVM ((uint8_t)0xFF) /*!< LSB mantissa of UART4DIV [7:0] mask */
|
|
|
|
#define UART4_BRR2_DIVM ((uint8_t)0xF0) /*!< MSB mantissa of UART4DIV [11:8] mask */
|
|
#define UART4_BRR2_DIVF ((uint8_t)0x0F) /*!< Fraction bits of UART4DIV [3:0] mask */
|
|
|
|
#define UART4_CR1_R8 ((uint8_t)0x80) /*!< Receive Data bit 8 */
|
|
#define UART4_CR1_T8 ((uint8_t)0x40) /*!< Transmit data bit 8 */
|
|
#define UART4_CR1_UARTD ((uint8_t)0x20) /*!< UART4 Disable (for low power consumption) */
|
|
#define UART4_CR1_M ((uint8_t)0x10) /*!< Word length mask */
|
|
#define UART4_CR1_WAKE ((uint8_t)0x08) /*!< Wake-up method mask */
|
|
#define UART4_CR1_PCEN ((uint8_t)0x04) /*!< Parity Control Enable mask */
|
|
#define UART4_CR1_PS ((uint8_t)0x02) /*!< UART4 Parity Selection */
|
|
#define UART4_CR1_PIEN ((uint8_t)0x01) /*!< UART4 Parity Interrupt Enable mask */
|
|
|
|
#define UART4_CR2_TIEN ((uint8_t)0x80) /*!< Transmitter Interrupt Enable mask */
|
|
#define UART4_CR2_TCIEN ((uint8_t)0x40) /*!< Transmission Complete Interrupt Enable mask */
|
|
#define UART4_CR2_RIEN ((uint8_t)0x20) /*!< Receiver Interrupt Enable mask */
|
|
#define UART4_CR2_ILIEN ((uint8_t)0x10) /*!< IDLE Line Interrupt Enable mask */
|
|
#define UART4_CR2_TEN ((uint8_t)0x08) /*!< Transmitter Enable mask */
|
|
#define UART4_CR2_REN ((uint8_t)0x04) /*!< Receiver Enable mask */
|
|
#define UART4_CR2_RWU ((uint8_t)0x02) /*!< Receiver Wake-Up mask */
|
|
#define UART4_CR2_SBK ((uint8_t)0x01) /*!< Send Break mask */
|
|
|
|
#define UART4_CR3_LINEN ((uint8_t)0x40) /*!< Alternate Function output mask */
|
|
#define UART4_CR3_STOP ((uint8_t)0x30) /*!< STOP bits [1:0] mask */
|
|
#define UART4_CR3_CKEN ((uint8_t)0x08) /*!< Clock Enable mask */
|
|
#define UART4_CR3_CPOL ((uint8_t)0x04) /*!< Clock Polarity mask */
|
|
#define UART4_CR3_CPHA ((uint8_t)0x02) /*!< Clock Phase mask */
|
|
#define UART4_CR3_LBCL ((uint8_t)0x01) /*!< Last Bit Clock pulse mask */
|
|
|
|
#define UART4_CR4_LBDIEN ((uint8_t)0x40) /*!< LIN Break Detection Interrupt Enable mask */
|
|
#define UART4_CR4_LBDL ((uint8_t)0x20) /*!< LIN Break Detection Length mask */
|
|
#define UART4_CR4_LBDF ((uint8_t)0x10) /*!< LIN Break Detection Flag mask */
|
|
#define UART4_CR4_ADD ((uint8_t)0x0F) /*!< Address of the UART4 node mask */
|
|
|
|
#define UART4_CR5_SCEN ((uint8_t)0x20) /*!< Smart Card Enable mask */
|
|
#define UART4_CR5_NACK ((uint8_t)0x10) /*!< Smart Card Nack Enable mask */
|
|
#define UART4_CR5_HDSEL ((uint8_t)0x08) /*!< Half-Duplex Selection mask */
|
|
#define UART4_CR5_IRLP ((uint8_t)0x04) /*!< Irda Low Power Selection mask */
|
|
#define UART4_CR5_IREN ((uint8_t)0x02) /*!< Irda Enable mask */
|
|
|
|
#define UART4_CR6_LDUM ((uint8_t)0x80) /*!< LIN Divider Update Method */
|
|
#define UART4_CR6_LSLV ((uint8_t)0x20) /*!< LIN Slave Enable */
|
|
#define UART4_CR6_LASE ((uint8_t)0x10) /*!< LIN Auto synchronization Enable */
|
|
#define UART4_CR6_LHDIEN ((uint8_t)0x04) /*!< LIN Header Detection Interrupt Enable */
|
|
#define UART4_CR6_LHDF ((uint8_t)0x02) /*!< LIN Header Detection Flag */
|
|
#define UART4_CR6_LSF ((uint8_t)0x01) /*!< LIN Synch Field */
|
|
#endif /* STM8AF622x */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
/**
|
|
* @brief Controller Area Network (CAN)
|
|
*/
|
|
|
|
typedef struct {
|
|
__IO uint8_t MCR; /*!< CAN master control register */
|
|
__IO uint8_t MSR; /*!< CAN master status register */
|
|
__IO uint8_t TSR; /*!< CAN transmit status register */
|
|
__IO uint8_t TPR; /*!< CAN transmit priority register */
|
|
__IO uint8_t RFR; /*!< CAN receive FIFO register */
|
|
__IO uint8_t IER; /*!< CAN interrupt enable register */
|
|
__IO uint8_t DGR; /*!< CAN diagnosis register */
|
|
__IO uint8_t PSR; /*!< CAN page selection register */
|
|
|
|
union {
|
|
struct {
|
|
__IO uint8_t MCSR;
|
|
__IO uint8_t MDLCR;
|
|
__IO uint8_t MIDR1;
|
|
__IO uint8_t MIDR2;
|
|
__IO uint8_t MIDR3;
|
|
__IO uint8_t MIDR4;
|
|
__IO uint8_t MDAR1;
|
|
__IO uint8_t MDAR2;
|
|
__IO uint8_t MDAR3;
|
|
__IO uint8_t MDAR4;
|
|
__IO uint8_t MDAR5;
|
|
__IO uint8_t MDAR6;
|
|
__IO uint8_t MDAR7;
|
|
__IO uint8_t MDAR8;
|
|
__IO uint8_t MTSRL;
|
|
__IO uint8_t MTSRH;
|
|
} TxMailbox;
|
|
|
|
struct {
|
|
__IO uint8_t FR01;
|
|
__IO uint8_t FR02;
|
|
__IO uint8_t FR03;
|
|
__IO uint8_t FR04;
|
|
__IO uint8_t FR05;
|
|
__IO uint8_t FR06;
|
|
__IO uint8_t FR07;
|
|
__IO uint8_t FR08;
|
|
|
|
__IO uint8_t FR09;
|
|
__IO uint8_t FR10;
|
|
__IO uint8_t FR11;
|
|
__IO uint8_t FR12;
|
|
__IO uint8_t FR13;
|
|
__IO uint8_t FR14;
|
|
__IO uint8_t FR15;
|
|
__IO uint8_t FR16;
|
|
} Filter;
|
|
|
|
struct {
|
|
__IO uint8_t F0R1;
|
|
__IO uint8_t F0R2;
|
|
__IO uint8_t F0R3;
|
|
__IO uint8_t F0R4;
|
|
__IO uint8_t F0R5;
|
|
__IO uint8_t F0R6;
|
|
__IO uint8_t F0R7;
|
|
__IO uint8_t F0R8;
|
|
|
|
__IO uint8_t F1R1;
|
|
__IO uint8_t F1R2;
|
|
__IO uint8_t F1R3;
|
|
__IO uint8_t F1R4;
|
|
__IO uint8_t F1R5;
|
|
__IO uint8_t F1R6;
|
|
__IO uint8_t F1R7;
|
|
__IO uint8_t F1R8;
|
|
} Filter01;
|
|
|
|
struct {
|
|
__IO uint8_t F2R1;
|
|
__IO uint8_t F2R2;
|
|
__IO uint8_t F2R3;
|
|
__IO uint8_t F2R4;
|
|
__IO uint8_t F2R5;
|
|
__IO uint8_t F2R6;
|
|
__IO uint8_t F2R7;
|
|
__IO uint8_t F2R8;
|
|
|
|
__IO uint8_t F3R1;
|
|
__IO uint8_t F3R2;
|
|
__IO uint8_t F3R3;
|
|
__IO uint8_t F3R4;
|
|
__IO uint8_t F3R5;
|
|
__IO uint8_t F3R6;
|
|
__IO uint8_t F3R7;
|
|
__IO uint8_t F3R8;
|
|
} Filter23;
|
|
|
|
struct {
|
|
__IO uint8_t F4R1;
|
|
__IO uint8_t F4R2;
|
|
__IO uint8_t F4R3;
|
|
__IO uint8_t F4R4;
|
|
__IO uint8_t F4R5;
|
|
__IO uint8_t F4R6;
|
|
__IO uint8_t F4R7;
|
|
__IO uint8_t F4R8;
|
|
|
|
__IO uint8_t F5R1;
|
|
__IO uint8_t F5R2;
|
|
__IO uint8_t F5R3;
|
|
__IO uint8_t F5R4;
|
|
__IO uint8_t F5R5;
|
|
__IO uint8_t F5R6;
|
|
__IO uint8_t F5R7;
|
|
__IO uint8_t F5R8;
|
|
} Filter45;
|
|
|
|
struct {
|
|
__IO uint8_t ESR;
|
|
__IO uint8_t EIER;
|
|
__IO uint8_t TECR;
|
|
__IO uint8_t RECR;
|
|
__IO uint8_t BTR1;
|
|
__IO uint8_t BTR2;
|
|
uint8_t Reserved1[2];
|
|
__IO uint8_t FMR1;
|
|
__IO uint8_t FMR2;
|
|
__IO uint8_t FCR1;
|
|
__IO uint8_t FCR2;
|
|
__IO uint8_t FCR3;
|
|
uint8_t Reserved2[3];
|
|
} Config;
|
|
|
|
struct {
|
|
__IO uint8_t MFMI;
|
|
__IO uint8_t MDLCR;
|
|
__IO uint8_t MIDR1;
|
|
__IO uint8_t MIDR2;
|
|
__IO uint8_t MIDR3;
|
|
__IO uint8_t MIDR4;
|
|
__IO uint8_t MDAR1;
|
|
__IO uint8_t MDAR2;
|
|
__IO uint8_t MDAR3;
|
|
__IO uint8_t MDAR4;
|
|
__IO uint8_t MDAR5;
|
|
__IO uint8_t MDAR6;
|
|
__IO uint8_t MDAR7;
|
|
__IO uint8_t MDAR8;
|
|
__IO uint8_t MTSRL;
|
|
__IO uint8_t MTSRH;
|
|
} RxFIFO;
|
|
} Page;
|
|
} CAN_TypeDef;
|
|
|
|
/** @addtogroup CAN_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
/******************************* Common ***************************************/
|
|
/* CAN Master Control Register bits */
|
|
#define CAN_MCR_INRQ ((uint8_t)0x01)
|
|
#define CAN_MCR_SLEEP ((uint8_t)0x02)
|
|
#define CAN_MCR_TXFP ((uint8_t)0x04)
|
|
#define CAN_MCR_RFLM ((uint8_t)0x08)
|
|
#define CAN_MCR_NART ((uint8_t)0x10)
|
|
#define CAN_MCR_AWUM ((uint8_t)0x20)
|
|
#define CAN_MCR_ABOM ((uint8_t)0x40)
|
|
#define CAN_MCR_TTCM ((uint8_t)0x80)
|
|
|
|
/* CAN Master Status Register bits */
|
|
#define CAN_MSR_INAK ((uint8_t)0x01)
|
|
#define CAN_MSR_SLAK ((uint8_t)0x02)
|
|
#define CAN_MSR_ERRI ((uint8_t)0x04)
|
|
#define CAN_MSR_WKUI ((uint8_t)0x08)
|
|
#define CAN_MSR_TX ((uint8_t)0x10)
|
|
#define CAN_MSR_RX ((uint8_t)0x20)
|
|
|
|
/* CAN Transmit Status Register bits */
|
|
#define CAN_TSR_RQCP0 ((uint8_t)0x01)
|
|
#define CAN_TSR_RQCP1 ((uint8_t)0x02)
|
|
#define CAN_TSR_RQCP2 ((uint8_t)0x04)
|
|
#define CAN_TSR_RQCP012 ((uint8_t)0x07)
|
|
#define CAN_TSR_TXOK0 ((uint8_t)0x10)
|
|
#define CAN_TSR_TXOK1 ((uint8_t)0x20)
|
|
#define CAN_TSR_TXOK2 ((uint8_t)0x40)
|
|
|
|
#define CAN_TPR_CODE0 ((uint8_t)0x01)
|
|
#define CAN_TPR_TME0 ((uint8_t)0x04)
|
|
#define CAN_TPR_TME1 ((uint8_t)0x08)
|
|
#define CAN_TPR_TME2 ((uint8_t)0x10)
|
|
#define CAN_TPR_LOW0 ((uint8_t)0x20)
|
|
#define CAN_TPR_LOW1 ((uint8_t)0x40)
|
|
#define CAN_TPR_LOW2 ((uint8_t)0x80)
|
|
/* CAN Receive FIFO Register bits */
|
|
#define CAN_RFR_FMP01 ((uint8_t)0x03)
|
|
#define CAN_RFR_FULL ((uint8_t)0x08)
|
|
#define CAN_RFR_FOVR ((uint8_t)0x10)
|
|
#define CAN_RFR_RFOM ((uint8_t)0x20)
|
|
|
|
/* CAN Interrupt Register bits */
|
|
#define CAN_IER_TMEIE ((uint8_t)0x01)
|
|
#define CAN_IER_FMPIE ((uint8_t)0x02)
|
|
#define CAN_IER_FFIE ((uint8_t)0x04)
|
|
#define CAN_IER_FOVIE ((uint8_t)0x08)
|
|
#define CAN_IER_WKUIE ((uint8_t)0x80)
|
|
|
|
|
|
/* CAN diagnostic Register bits */
|
|
#define CAN_DGR_LBKM ((uint8_t)0x01)
|
|
#define CAN_DGR_SLIM ((uint8_t)0x02)
|
|
#define CAN_DGR_SAMP ((uint8_t)0x04)
|
|
#define CAN_DGR_RX ((uint8_t)0x08)
|
|
#define CAN_DGR_TXM2E ((uint8_t)0x10)
|
|
|
|
|
|
/* CAN page select Register bits */
|
|
#define CAN_PSR_PS0 ((uint8_t)0x01)
|
|
#define CAN_PSR_PS1 ((uint8_t)0x02)
|
|
#define CAN_PSR_PS2 ((uint8_t)0x04)
|
|
|
|
/******************** Tx MailBox & Fifo Page common bits **********************/
|
|
#define CAN_MCSR_TXRQ ((uint8_t)0x01)
|
|
#define CAN_MCSR_ABRQ ((uint8_t)0x02)
|
|
#define CAN_MCSR_RQCP ((uint8_t)0x04)
|
|
#define CAN_MCSR_TXOK ((uint8_t)0x08)
|
|
#define CAN_MCSR_ALST ((uint8_t)0x10)
|
|
#define CAN_MCSR_TERR ((uint8_t)0x20)
|
|
|
|
#define CAN_MDLCR_DLC ((uint8_t)0x0F)
|
|
#define CAN_MDLCR_TGT ((uint8_t)0x80)
|
|
|
|
#define CAN_MIDR1_RTR ((uint8_t)0x20)
|
|
#define CAN_MIDR1_IDE ((uint8_t)0x40)
|
|
|
|
|
|
/************************* Filter Page ****************************************/
|
|
|
|
/* CAN Error Status Register bits */
|
|
#define CAN_ESR_EWGF ((uint8_t)0x01)
|
|
#define CAN_ESR_EPVF ((uint8_t)0x02)
|
|
#define CAN_ESR_BOFF ((uint8_t)0x04)
|
|
#define CAN_ESR_LEC0 ((uint8_t)0x10)
|
|
#define CAN_ESR_LEC1 ((uint8_t)0x20)
|
|
#define CAN_ESR_LEC2 ((uint8_t)0x40)
|
|
#define CAN_ESR_LEC ((uint8_t)0x70)
|
|
|
|
/* CAN Error Status Register bits */
|
|
#define CAN_EIER_EWGIE ((uint8_t)0x01)
|
|
#define CAN_EIER_EPVIE ((uint8_t)0x02)
|
|
#define CAN_EIER_BOFIE ((uint8_t)0x04)
|
|
#define CAN_EIER_LECIE ((uint8_t)0x10)
|
|
#define CAN_EIER_ERRIE ((uint8_t)0x80)
|
|
|
|
/* CAN transmit error counter Register bits(CAN_TECR) */
|
|
#define CAN_TECR_TEC0 ((uint8_t)0x01)
|
|
#define CAN_TECR_TEC1 ((uint8_t)0x02)
|
|
#define CAN_TECR_TEC2 ((uint8_t)0x04)
|
|
#define CAN_TECR_TEC3 ((uint8_t)0x08)
|
|
#define CAN_TECR_TEC4 ((uint8_t)0x10)
|
|
#define CAN_TECR_TEC5 ((uint8_t)0x20)
|
|
#define CAN_TECR_TEC6 ((uint8_t)0x40)
|
|
#define CAN_TECR_TEC7 ((uint8_t)0x80)
|
|
|
|
/* CAN RECEIVE error counter Register bits(CAN_TECR) */
|
|
#define CAN_RECR_REC0 ((uint8_t)0x01)
|
|
#define CAN_RECR_REC1 ((uint8_t)0x02)
|
|
#define CAN_RECR_REC2 ((uint8_t)0x04)
|
|
#define CAN_RECR_REC3 ((uint8_t)0x08)
|
|
#define CAN_RECR_REC4 ((uint8_t)0x10)
|
|
#define CAN_RECR_REC5 ((uint8_t)0x20)
|
|
#define CAN_RECR_REC6 ((uint8_t)0x40)
|
|
#define CAN_RECR_REC7 ((uint8_t)0x80)
|
|
|
|
/* CAN filter mode register bits (CAN_FMR) */
|
|
#define CAN_FMR1_FML0 ((uint8_t)0x01)
|
|
#define CAN_FMR1_FMH0 ((uint8_t)0x02)
|
|
#define CAN_FMR1_FML1 ((uint8_t)0x04)
|
|
#define CAN_FMR1_FMH1 ((uint8_t)0x08)
|
|
#define CAN_FMR1_FML2 ((uint8_t)0x10)
|
|
#define CAN_FMR1_FMH2 ((uint8_t)0x20)
|
|
#define CAN_FMR1_FML3 ((uint8_t)0x40)
|
|
#define CAN_FMR1_FMH3 ((uint8_t)0x80)
|
|
|
|
#define CAN_FMR2_FML4 ((uint8_t)0x01)
|
|
#define CAN_FMR2_FMH4 ((uint8_t)0x02)
|
|
#define CAN_FMR2_FML5 ((uint8_t)0x04)
|
|
#define CAN_FMR2_FMH5 ((uint8_t)0x08)
|
|
|
|
/* CAN filter Config register bits (CAN_FCR) */
|
|
#define CAN_FCR1_FACT0 ((uint8_t)0x01)
|
|
#define CAN_FCR1_FACT1 ((uint8_t)0x10)
|
|
#define CAN_FCR2_FACT2 ((uint8_t)0x01)
|
|
#define CAN_FCR2_FACT3 ((uint8_t)0x10)
|
|
#define CAN_FCR3_FACT4 ((uint8_t)0x01)
|
|
#define CAN_FCR3_FACT5 ((uint8_t)0x10)
|
|
|
|
#define CAN_FCR1_FSC00 ((uint8_t)0x02)
|
|
#define CAN_FCR1_FSC01 ((uint8_t)0x04)
|
|
#define CAN_FCR1_FSC10 ((uint8_t)0x20)
|
|
#define CAN_FCR1_FSC11 ((uint8_t)0x40)
|
|
#define CAN_FCR2_FSC20 ((uint8_t)0x02)
|
|
#define CAN_FCR2_FSC21 ((uint8_t)0x04)
|
|
#define CAN_FCR2_FSC30 ((uint8_t)0x20)
|
|
#define CAN_FCR2_FSC31 ((uint8_t)0x40)
|
|
#define CAN_FCR3_FSC40 ((uint8_t)0x02)
|
|
#define CAN_FCR3_FSC41 ((uint8_t)0x04)
|
|
#define CAN_FCR3_FSC50 ((uint8_t)0x20)
|
|
#define CAN_FCR3_FSC51 ((uint8_t)0x40)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup CAN_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
#define CAN_MCR_RESET_VALUE ((uint8_t)0x02)
|
|
#define CAN_MSR_RESET_VALUE ((uint8_t)0x02)
|
|
#define CAN_TSR_RESET_VALUE ((uint8_t)0x00)
|
|
#define CAN_TPR_RESET_VALUE ((uint8_t)0x0C)
|
|
#define CAN_RFR_RESET_VALUE ((uint8_t)0x00)
|
|
#define CAN_IER_RESET_VALUE ((uint8_t)0x00)
|
|
#define CAN_DGR_RESET_VALUE ((uint8_t)0x0C)
|
|
#define CAN_PSR_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
#define CAN_ESR_RESET_VALUE ((uint8_t)0x00)
|
|
#define CAN_EIER_RESET_VALUE ((uint8_t)0x00)
|
|
#define CAN_TECR_RESET_VALUE ((uint8_t)0x00)
|
|
#define CAN_RECR_RESET_VALUE ((uint8_t)0x00)
|
|
#define CAN_BTR1_RESET_VALUE ((uint8_t)0x40)
|
|
#define CAN_BTR2_RESET_VALUE ((uint8_t)0x23)
|
|
#define CAN_FMR1_RESET_VALUE ((uint8_t)0x00)
|
|
#define CAN_FMR2_RESET_VALUE ((uint8_t)0x00)
|
|
#define CAN_FCR_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
#define CAN_MFMI_RESET_VALUE ((uint8_t)0x00)
|
|
#define CAN_MDLC_RESET_VALUE ((uint8_t)0x00)
|
|
#define CAN_MCSR_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @brief Configuration Registers (CFG)
|
|
*/
|
|
|
|
typedef struct CFG_struct {
|
|
__IO uint8_t GCR; /*!< Global Configuration register */
|
|
}
|
|
CFG_TypeDef;
|
|
|
|
/** @addtogroup CFG_Registers_Reset_Value
|
|
* @{
|
|
*/
|
|
|
|
#define CFG_GCR_RESET_VALUE ((uint8_t)0x00)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup CFG_Registers_Bits_Definition
|
|
* @{
|
|
*/
|
|
|
|
#define CFG_GCR_SWD ((uint8_t)0x01) /*!< Swim disable bit mask */
|
|
#define CFG_GCR_AL ((uint8_t)0x02) /*!< Activation Level bit mask */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/******************************************************************************/
|
|
/* Peripherals Base Address */
|
|
/******************************************************************************/
|
|
|
|
/** @addtogroup MAP_FILE_Base_Addresses
|
|
* @{
|
|
*/
|
|
#define OPT_BaseAddress 0x4800
|
|
#define GPIOA_BaseAddress 0x5000
|
|
#define GPIOB_BaseAddress 0x5005
|
|
#define GPIOC_BaseAddress 0x500A
|
|
#define GPIOD_BaseAddress 0x500F
|
|
#define GPIOE_BaseAddress 0x5014
|
|
#define GPIOF_BaseAddress 0x5019
|
|
#define GPIOG_BaseAddress 0x501E
|
|
#define GPIOH_BaseAddress 0x5023
|
|
#define GPIOI_BaseAddress 0x5028
|
|
#define FLASH_BaseAddress 0x505A
|
|
#define EXTI_BaseAddress 0x50A0
|
|
#define RST_BaseAddress 0x50B3
|
|
#define CLK_BaseAddress 0x50C0
|
|
#define WWDG_BaseAddress 0x50D1
|
|
#define IWDG_BaseAddress 0x50E0
|
|
#define AWU_BaseAddress 0x50F0
|
|
#define BEEP_BaseAddress 0x50F3
|
|
#define SPI_BaseAddress 0x5200
|
|
#define I2C_BaseAddress 0x5210
|
|
#define UART1_BaseAddress 0x5230
|
|
#define UART2_BaseAddress 0x5240
|
|
#define UART3_BaseAddress 0x5240
|
|
#define UART4_BaseAddress 0x5230
|
|
#define TIM1_BaseAddress 0x5250
|
|
#define TIM2_BaseAddress 0x5300
|
|
#define TIM3_BaseAddress 0x5320
|
|
#define TIM4_BaseAddress 0x5340
|
|
#define TIM5_BaseAddress 0x5300
|
|
#define TIM6_BaseAddress 0x5340
|
|
#define ADC1_BaseAddress 0x53E0
|
|
#define ADC2_BaseAddress 0x5400
|
|
#define CAN_BaseAddress 0x5420
|
|
#define CFG_BaseAddress 0x7F60
|
|
#define ITC_BaseAddress 0x7F70
|
|
#define DM_BaseAddress 0x7F90
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/******************************************************************************/
|
|
/* Peripherals declarations */
|
|
/******************************************************************************/
|
|
|
|
#if defined(STM8S105) || defined(STM8S005) || defined(STM8S103) || defined(STM8S003) || \
|
|
defined(STM8S903) || defined(STM8AF626x) || defined(STM8AF622x)
|
|
#define ADC1 ((ADC1_TypeDef *) ADC1_BaseAddress)
|
|
#endif /* (STM8S105) ||(STM8S103) || (STM8S005) ||(STM8S003) || (STM8S903) || (STM8AF626x) || (STM8AF622x)*/
|
|
|
|
#if defined(STM8S208) || defined(STM8S207) || defined (STM8S007) || defined (STM8AF52Ax) || \
|
|
defined (STM8AF62Ax)
|
|
#define ADC2 ((ADC2_TypeDef *) ADC2_BaseAddress)
|
|
#endif /* (STM8S208) ||(STM8S207) || (STM8S007) || (STM8AF52Ax) || (STM8AF62Ax) */
|
|
|
|
#define AWU ((AWU_TypeDef *) AWU_BaseAddress)
|
|
|
|
#define BEEP ((BEEP_TypeDef *) BEEP_BaseAddress)
|
|
|
|
#if defined (STM8S208) || defined (STM8AF52Ax)
|
|
#define CAN ((CAN_TypeDef *) CAN_BaseAddress)
|
|
#endif /* (STM8S208) || (STM8AF52Ax) */
|
|
|
|
#define CLK ((CLK_TypeDef *) CLK_BaseAddress)
|
|
|
|
#define EXTI ((EXTI_TypeDef *) EXTI_BaseAddress)
|
|
|
|
#define FLASH ((FLASH_TypeDef *) FLASH_BaseAddress)
|
|
|
|
#define OPT ((OPT_TypeDef *) OPT_BaseAddress)
|
|
|
|
#define GPIOA ((GPIO_TypeDef *) GPIOA_BaseAddress)
|
|
|
|
#define GPIOB ((GPIO_TypeDef *) GPIOB_BaseAddress)
|
|
|
|
#define GPIOC ((GPIO_TypeDef *) GPIOC_BaseAddress)
|
|
|
|
#define GPIOD ((GPIO_TypeDef *) GPIOD_BaseAddress)
|
|
|
|
#define GPIOE ((GPIO_TypeDef *) GPIOE_BaseAddress)
|
|
|
|
#define GPIOF ((GPIO_TypeDef *) GPIOF_BaseAddress)
|
|
|
|
#if defined(STM8S207) || defined (STM8S007) || defined(STM8S208) || defined(STM8S105) || \
|
|
defined(STM8S005) || defined (STM8AF52Ax) || defined (STM8AF62Ax) || defined (STM8AF626x)
|
|
#define GPIOG ((GPIO_TypeDef *) GPIOG_BaseAddress)
|
|
#endif /* (STM8S208) ||(STM8S207) || (STM8S105) || (STM8AF52Ax) || (STM8AF62Ax) || (STM8AF626x) */
|
|
|
|
#if defined(STM8S207) || defined (STM8S007) || defined(STM8S208) || defined (STM8AF52Ax) || \
|
|
defined (STM8AF62Ax)
|
|
#define GPIOH ((GPIO_TypeDef *) GPIOH_BaseAddress)
|
|
#define GPIOI ((GPIO_TypeDef *) GPIOI_BaseAddress)
|
|
#endif /* (STM8S208) ||(STM8S207) || (STM8AF62Ax) || (STM8AF52Ax) */
|
|
|
|
#define RST ((RST_TypeDef *) RST_BaseAddress)
|
|
|
|
#define WWDG ((WWDG_TypeDef *) WWDG_BaseAddress)
|
|
#define IWDG ((IWDG_TypeDef *) IWDG_BaseAddress)
|
|
|
|
#define SPI ((SPI_TypeDef *) SPI_BaseAddress)
|
|
#define I2C ((I2C_TypeDef *) I2C_BaseAddress)
|
|
|
|
#if defined(STM8S208) || defined(STM8S207) || defined (STM8S007) || defined(STM8S103) || \
|
|
defined(STM8S003) || defined(STM8S903) || defined (STM8AF52Ax) || defined (STM8AF62Ax)
|
|
#define UART1 ((UART1_TypeDef *) UART1_BaseAddress)
|
|
#endif /* (STM8S208) ||(STM8S207) || (STM8S103) || (STM8S903) || (STM8AF52Ax) || (STM8AF62Ax) */
|
|
|
|
#if defined (STM8S105) || defined (STM8S005) || defined (STM8AF626x)
|
|
#define UART2 ((UART2_TypeDef *) UART2_BaseAddress)
|
|
#endif /* STM8S105 || STM8S005 || STM8AF626x */
|
|
|
|
#if defined(STM8S208) || defined(STM8S207) || defined (STM8S007) || defined (STM8AF52Ax) || \
|
|
defined (STM8AF62Ax)
|
|
#define UART3 ((UART3_TypeDef *) UART3_BaseAddress)
|
|
#endif /* (STM8S208) ||(STM8S207) || (STM8AF62Ax) || (STM8AF52Ax) */
|
|
|
|
#if defined(STM8AF622x)
|
|
#define UART4 ((UART4_TypeDef *) UART4_BaseAddress)
|
|
#endif /* (STM8AF622x) */
|
|
|
|
#define TIM1 ((TIM1_TypeDef *) TIM1_BaseAddress)
|
|
|
|
#if defined(STM8S208) || defined(STM8S207) || defined (STM8S007) || defined(STM8S103) || \
|
|
defined(STM8S003) || defined(STM8S105) || defined(STM8S005) || defined (STM8AF52Ax) || \
|
|
defined (STM8AF62Ax) || defined (STM8AF626x)
|
|
#define TIM2 ((TIM2_TypeDef *) TIM2_BaseAddress)
|
|
#endif /* (STM8S208) ||(STM8S207) || (STM8S103) || (STM8S105) || (STM8AF52Ax) || (STM8AF62Ax) || (STM8AF626x)*/
|
|
|
|
#if defined(STM8S208) || defined(STM8S207) || defined (STM8S007) || defined(STM8S105) || \
|
|
defined(STM8S005) || defined (STM8AF52Ax) || defined (STM8AF62Ax) || defined (STM8AF626x)
|
|
#define TIM3 ((TIM3_TypeDef *) TIM3_BaseAddress)
|
|
#endif /* (STM8S208) ||(STM8S207) || (STM8S105) || (STM8AF62Ax) || (STM8AF52Ax) || (STM8AF626x)*/
|
|
|
|
#if defined(STM8S208) || defined(STM8S207) || defined (STM8S007) || defined(STM8S103) || \
|
|
defined(STM8S003) || defined(STM8S105) || defined(STM8S005) || defined (STM8AF52Ax) || \
|
|
defined (STM8AF62Ax) || defined (STM8AF626x)
|
|
#define TIM4 ((TIM4_TypeDef *) TIM4_BaseAddress)
|
|
#endif /* (STM8S208) ||(STM8S207) || (STM8S103) || (STM8S105) || (STM8AF52Ax) || (STM8AF62Ax) || (STM8AF626x)*/
|
|
|
|
#if defined (STM8S903) || defined (STM8AF622x)
|
|
#define TIM5 ((TIM5_TypeDef *) TIM5_BaseAddress)
|
|
#define TIM6 ((TIM6_TypeDef *) TIM6_BaseAddress)
|
|
#endif /* (STM8S903) || (STM8AF622x) */
|
|
|
|
#define ITC ((ITC_TypeDef *) ITC_BaseAddress)
|
|
|
|
#define CFG ((CFG_TypeDef *) CFG_BaseAddress)
|
|
|
|
#define DM ((DM_TypeDef *) DM_BaseAddress)
|
|
|
|
|
|
#ifdef USE_STDPERIPH_DRIVER
|
|
|
|
#include "stm8s_conf.h"
|
|
|
|
#endif
|
|
|
|
/* Exported macro --------------------------------------------------------------*/
|
|
|
|
/*============================== Interrupts ====================================*/
|
|
#ifdef _RAISONANCE_
|
|
#include <intrins.h>
|
|
#define enableInterrupts() _rim_() /* enable interrupts */
|
|
#define disableInterrupts() _sim_() /* disable interrupts */
|
|
#define rim() _rim_() /* enable interrupts */
|
|
#define sim() _sim_() /* disable interrupts */
|
|
#define nop() _nop_() /* No Operation */
|
|
#define trap() _trap_() /* Trap (soft IT) */
|
|
#define wfi() _wfi_() /* Wait For Interrupt */
|
|
#define halt() _halt_() /* Halt */
|
|
#elif defined(_COSMIC_)
|
|
#define enableInterrupts() {_asm("rim\n");} /* enable interrupts */
|
|
#define disableInterrupts() {_asm("sim\n");} /* disable interrupts */
|
|
#define rim() {_asm("rim\n");} /* enable interrupts */
|
|
#define sim() {_asm("sim\n");} /* disable interrupts */
|
|
#define nop() {_asm("nop\n");} /* No Operation */
|
|
#define trap() {_asm("trap\n");} /* Trap (soft IT) */
|
|
#define wfi() {_asm("wfi\n");} /* Wait For Interrupt */
|
|
#define halt() {_asm("halt\n");} /* Halt */
|
|
#elif defined(_SDCC_) // SDCC patch: for inline assembly
|
|
#define enableInterrupts() __asm__("rim") /* enable interrupts */
|
|
#define disableInterrupts() __asm__("sim") /* disable interrupts */
|
|
#define rim() __asm__("rim") /* enable interrupts */
|
|
#define sim() __asm__("sim") /* disable interrupts */
|
|
#define nop() __asm__("nop") /* No Operation */
|
|
#define trap() __asm__("trap") /* Trap (soft IT) */
|
|
#define wfi() __asm__("wfi") /* Wait For Interrupt */
|
|
#define halt() __asm__("halt") /* Halt */
|
|
#else /*_IAR_*/
|
|
#include <intrinsics.h>
|
|
#define enableInterrupts() __enable_interrupt() /* enable interrupts */
|
|
#define disableInterrupts() __disable_interrupt() /* disable interrupts */
|
|
#define rim() __enable_interrupt() /* enable interrupts */
|
|
#define sim() __disable_interrupt() /* disable interrupts */
|
|
#define nop() __no_operation() /* No Operation */
|
|
#define trap() __trap() /* Trap (soft IT) */
|
|
#define wfi() __wait_for_interrupt() /* Wait For Interrupt */
|
|
#define halt() __halt() /* Halt */
|
|
#endif /*_RAISONANCE_*/
|
|
|
|
/*============================== Interrupt vector Handling ========================*/
|
|
|
|
#ifdef _COSMIC_
|
|
#define INTERRUPT_HANDLER(a,b) @far @interrupt void a(void)
|
|
#define INTERRUPT_HANDLER_TRAP(a) void @far @interrupt a(void)
|
|
#endif /* _COSMIC_ */
|
|
|
|
#ifdef _RAISONANCE_
|
|
#define INTERRUPT_HANDLER(a,b) void a(void) interrupt b
|
|
#define INTERRUPT_HANDLER_TRAP(a) void a(void) trap
|
|
#endif /* _RAISONANCE_ */
|
|
|
|
#ifdef _IAR_
|
|
#define STRINGVECTOR(x) #x
|
|
#define VECTOR_ID(x) STRINGVECTOR( vector = (x) )
|
|
#define INTERRUPT_HANDLER( a, b ) \
|
|
_Pragma( VECTOR_ID( (b)+2 ) ) \
|
|
__interrupt void (a)( void )
|
|
#define INTERRUPT_HANDLER_TRAP(a) \
|
|
_Pragma( VECTOR_ID( 1 ) ) \
|
|
__interrupt void (a) (void)
|
|
#endif /* _IAR_ */
|
|
|
|
#ifdef _SDCC_ // SDCC patch: ISR handlers
|
|
#define INTERRUPT_HANDLER(a, b) void a() __interrupt(b)
|
|
#if (SKIP_TRAPS == 0) // SDCC patch: trap handling requires SDCC >=v3.4.3
|
|
#define INTERRUPT_HANDLER_TRAP(a) void a(void) __trap
|
|
#endif /* USE_TRAPS=1 */
|
|
#endif /* _SDCC_ */
|
|
|
|
/*============================== Interrupt Handler declaration ========================*/
|
|
#ifdef _COSMIC_
|
|
#define INTERRUPT @far @interrupt
|
|
#elif defined(_IAR_)
|
|
#define INTERRUPT __interrupt
|
|
#elif defined(_SDCC_) // SDCC patch: doesn't work, yet :-(
|
|
#define INTERRUPT __interrupt
|
|
#endif /* _COSMIC_ */
|
|
|
|
/*============================== Handling bits ====================================*/
|
|
/*-----------------------------------------------------------------------------
|
|
Method : I
|
|
Description : Handle the bit from the character variables.
|
|
Comments : The different parameters of commands are
|
|
- VAR : Name of the character variable where the bit is located.
|
|
- Place : Bit position in the variable (7 6 5 4 3 2 1 0)
|
|
- Value : Can be 0 (reset bit) or not 0 (set bit)
|
|
The "MskBit" command allows to select some bits in a source
|
|
variables and copy it in a destination var (return the value).
|
|
The "ValBit" command returns the value of a bit in a char
|
|
variable: the bit is reset if it returns 0 else the bit is set.
|
|
This method generates not an optimised code yet.
|
|
-----------------------------------------------------------------------------*/
|
|
#define SetBit(VAR, Place) ( (VAR) |= (uint8_t)((uint8_t)1<<(uint8_t)(Place)) )
|
|
#define ClrBit(VAR, Place) ( (VAR) &= (uint8_t)((uint8_t)((uint8_t)1<<(uint8_t)(Place))^(uint8_t)255) )
|
|
|
|
#define ChgBit(VAR, Place) ( (VAR) ^= (uint8_t)((uint8_t)1<<(uint8_t)(Place)) )
|
|
#define AffBit(VAR, Place, Value) ((Value) ? \
|
|
((VAR) |= ((uint8_t)1<<(Place))) : \
|
|
((VAR) &= (((uint8_t)1<<(Place))^(uint8_t)255)))
|
|
#define MskBit(Dest, Msk, Src) ( (Dest) = ((Msk) & (Src)) | ((~(Msk)) & (Dest)) )
|
|
|
|
#define ValBit(VAR, Place) ((uint8_t)(VAR) & (uint8_t)((uint8_t)1<<(uint8_t)(Place)))
|
|
|
|
#define BYTE_0(n) ((uint8_t)((n) & (uint8_t)0xFF)) /*!< Returns the low byte of the 32-bit value */
|
|
#define BYTE_1(n) ((uint8_t)(BYTE_0((n) >> (uint8_t)8))) /*!< Returns the second byte of the 32-bit value */
|
|
#define BYTE_2(n) ((uint8_t)(BYTE_0((n) >> (uint8_t)16))) /*!< Returns the third byte of the 32-bit value */
|
|
#define BYTE_3(n) ((uint8_t)(BYTE_0((n) >> (uint8_t)24))) /*!< Returns the high byte of the 32-bit value */
|
|
|
|
/*============================== Assert Macros ====================================*/
|
|
#define IS_STATE_VALUE_OK(SensitivityValue) \
|
|
(((SensitivityValue) == ENABLE) || \
|
|
((SensitivityValue) == DISABLE))
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
Method : II
|
|
Description : Handle directly the bit.
|
|
Comments : The idea is to handle directly with the bit name. For that, it is
|
|
necessary to have RAM area descriptions (example: HW register...)
|
|
and the following command line for each area.
|
|
This method generates the most optimized code.
|
|
-----------------------------------------------------------------------------*/
|
|
|
|
#define AREA 0x00 /* The area of bits begins at address 0x10. */
|
|
|
|
#define BitClr(BIT) ( *((unsigned char *) (AREA+(BIT)/8)) &= (~(1<<(7-(BIT)%8))) )
|
|
#define BitSet(BIT) ( *((unsigned char *) (AREA+(BIT)/8)) |= (1<<(7-(BIT)%8)) )
|
|
#define BitVal(BIT) ( *((unsigned char *) (AREA+(BIT)/8)) & (1<<(7-(BIT)%8)) )
|
|
|
|
/* Exported functions ------------------------------------------------------- */
|
|
|
|
#endif /* __STM8S_H */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|