Bootstrap and definition library for programming STM32L100RC in ARM assembler. This was a class project to learn ARM assembly
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 

106 lines
4.6 KiB

;********************************************************************************
; FILE : INI_BASE.S
; AUTHOR : Ondrej Hruska
; DATE : 10/2015
; DESCR : Base library file. This file must be included before any other library
; files. This file defines memory map and base addresses of peripherals.
;
; Part of an assembler library for STM32L100, based on the STM32 CMSIS.
; Developed for educational purposes at the Department of Measure of CTU in Prague.
; See the LICENSE file for detailed terms of use.
;********************************************************************************
FLASH_BASE EQU 0x08000000 ; FLASH base address in the alias region
SRAM_BASE EQU 0x20000000 ; SRAM base address in the alias region
PERIPH_BASE EQU 0x40000000 ; Peripheral base address in the alias region
SRAM_BB_BASE EQU (SRAM_BASE + 0x02000000) ; SRAM base address in the bit-band region
PERIPH_BB_BASE EQU (PERIPH_BASE + 0x02000000) ; Peripheral base address in the bit-band region
; ------------------------- System Config Blocks -----------------------------
_SCS_BASE EQU 0xE000E000 ; System Control Space base
_SCB EQU (_SCS_BASE + 0x0D00) ; System Control Block base
_NVIC EQU (_SCS_BASE + 0x0100) ; Nested Interrupt Vector Controller base
_OB EQU 0x1FF80000 ; FLASH Option Bytes base address
_AES EQU 0x50060000 ; Encryption module
_FSMC EQU 0xA0000000 ; External Memory Control base
_DBGMCU EQU 0xE0042000 ; Debug MCU registers base address
; ----------------------------- Peripherals ----------------------------------
; *** Peripheral bus bases ***
_APB1 EQU PERIPH_BASE ; Advanced Peripheral Bus 1 base
_APB2 EQU (PERIPH_BASE + 0x10000) ; Advanced Peripheral Bus 2 base
_AHB EQU (PERIPH_BASE + 0x20000) ; Advanced High-speed Bus base
; *** Peripheral Bus 1 devices ***
_TIM2 EQU (_APB1 + 0x0000) ; Timer bases
_TIM3 EQU (_APB1 + 0x0400)
_TIM4 EQU (_APB1 + 0x0800)
_TIM5 EQU (_APB1 + 0x0C00)
_TIM6 EQU (_APB1 + 0x1000)
_TIM7 EQU (_APB1 + 0x1400)
_LCD EQU (_APB1 + 0x2400) ; LCD controller base
_RTC EQU (_APB1 + 0x2800) ; RTC base
_WWDG EQU (_APB1 + 0x2C00) ; Window Watchdog base
_IWDG EQU (_APB1 + 0x3000) ; Independent Watchdog base
_SPI2 EQU (_APB1 + 0x3800) ; SPI base
_SPI3 EQU (_APB1 + 0x3C00)
_USART2 EQU (_APB1 + 0x4400) ; USART base
_USART3 EQU (_APB1 + 0x4800)
_UART4 EQU (_APB1 + 0x4C00) ; UART base (?)
_UART5 EQU (_APB1 + 0x5000)
_I2C1 EQU (_APB1 + 0x5400) ; I2C base
_I2C2 EQU (_APB1 + 0x5800)
_PWR EQU (_APB1 + 0x7000) ; Power Control block base
_DAC EQU (_APB1 + 0x7400) ; D/A config base
_COMP EQU (_APB1 + 0x7C00) ; Analog Comparator base
_RI EQU (_APB1 + 0x7C04) ; Routing Interface base (analog pin connections)
_OPAMP EQU (_APB1 + 0x7C5C) ; OpAmp config base
_USB EQU (_APB1 + 0x5C00) ; USB registers base
; *** Peripheral Bus 2 devices ***
_TIM9 EQU (_APB2 + 0x0800) ; Timer base
_TIM10 EQU (_APB2 + 0x0C00)
_TIM11 EQU (_APB2 + 0x1000)
_SYSCFG EQU (_APB2 + 0x0000) ; System config block base
_EXTI EQU (_APB2 + 0x0400) ; External interrupt settings base
_ADC1 EQU (_APB2 + 0x2400) ; A/D 1
_ADCC EQU (_APB2 + 0x2700) ; common A/D registers base
_SDIO EQU (_APB2 + 0x2C00) ; SD host
_SPI1 EQU (_APB2 + 0x3000) ; SPI
_USART1 EQU (_APB2 + 0x3800)
; *** High Speed Bus devices ***
_GPIO EQU (_AHB + 0x0000) ; GPIO block base
_CRC EQU (_AHB + 0x3000) ; CRC module base
_RCC EQU (_AHB + 0x3800) ; Reset and Clock Config base
_DMA1 EQU (_AHB + 0x6000) ; DMA control base
_DMA2 EQU (_AHB + 0x6400)
_FLASH EQU (_AHB + 0x3C00) ; FLASH control base
END