You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
674 lines
26 KiB
674 lines
26 KiB
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_hal_spi.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.4
|
|
* @date 29-April-2016
|
|
* @brief Header file of SPI HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F1xx_HAL_SPI_H
|
|
#define __STM32F1xx_HAL_SPI_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup SPI
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup SPI_Exported_Types SPI Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief SPI Configuration Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t Mode; /*!< Specifies the SPI operating mode.
|
|
This parameter can be a value of @ref SPI_mode */
|
|
|
|
uint32_t Direction; /*!< Specifies the SPI Directional mode state.
|
|
This parameter can be a value of @ref SPI_Direction_mode */
|
|
|
|
uint32_t DataSize; /*!< Specifies the SPI data size.
|
|
This parameter can be a value of @ref SPI_data_size */
|
|
|
|
uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
|
|
This parameter can be a value of @ref SPI_Clock_Polarity */
|
|
|
|
uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
|
|
This parameter can be a value of @ref SPI_Clock_Phase */
|
|
|
|
uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
|
|
hardware (NSS pin) or by software using the SSI bit.
|
|
This parameter can be a value of @ref SPI_Slave_Select_management */
|
|
|
|
uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
|
|
used to configure the transmit and receive SCK clock.
|
|
This parameter can be a value of @ref SPI_BaudRate_Prescaler
|
|
@note The communication clock is derived from the master
|
|
clock. The slave clock does not need to be set */
|
|
|
|
uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
|
|
This parameter can be a value of @ref SPI_MSB_LSB_transmission */
|
|
|
|
uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not.
|
|
This parameter can be a value of @ref SPI_TI_mode */
|
|
|
|
uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
|
|
This parameter can be a value of @ref SPI_CRC_Calculation */
|
|
|
|
uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
|
|
This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
|
|
|
|
}SPI_InitTypeDef;
|
|
|
|
/**
|
|
* @brief HAL SPI State structure definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_SPI_STATE_RESET = 0x00, /*!< SPI not yet initialized or disabled */
|
|
HAL_SPI_STATE_READY = 0x01, /*!< SPI initialized and ready for use */
|
|
HAL_SPI_STATE_BUSY = 0x02, /*!< SPI process is ongoing */
|
|
HAL_SPI_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
|
|
HAL_SPI_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
|
|
HAL_SPI_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
|
|
HAL_SPI_STATE_ERROR = 0x03 /*!< SPI error state */
|
|
|
|
}HAL_SPI_StateTypeDef;
|
|
|
|
|
|
/**
|
|
* @brief SPI handle Structure definition
|
|
*/
|
|
typedef struct __SPI_HandleTypeDef
|
|
{
|
|
SPI_TypeDef *Instance; /*!< SPI registers base address */
|
|
|
|
SPI_InitTypeDef Init; /*!< SPI communication parameters */
|
|
|
|
uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */
|
|
|
|
uint16_t TxXferSize; /*!< SPI Tx transfer size */
|
|
|
|
uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */
|
|
|
|
uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */
|
|
|
|
uint16_t RxXferSize; /*!< SPI Rx transfer size */
|
|
|
|
uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */
|
|
|
|
DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA handle parameters */
|
|
|
|
DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA handle parameters */
|
|
|
|
void (*RxISR)(struct __SPI_HandleTypeDef * hspi); /*!< function pointer on Rx ISR */
|
|
|
|
void (*TxISR)(struct __SPI_HandleTypeDef * hspi); /*!< function pointer on Tx ISR */
|
|
|
|
HAL_LockTypeDef Lock; /*!< SPI locking object */
|
|
|
|
__IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */
|
|
|
|
__IO uint32_t ErrorCode; /*!< SPI Error code */
|
|
|
|
}SPI_HandleTypeDef;
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
|
|
/** @defgroup SPI_Exported_Constants SPI Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup SPI_Error_Codes SPI Error Codes
|
|
* @{
|
|
*/
|
|
#define HAL_SPI_ERROR_NONE ((uint32_t)0x00) /*!< No error */
|
|
#define HAL_SPI_ERROR_MODF ((uint32_t)0x01) /*!< MODF error */
|
|
#define HAL_SPI_ERROR_CRC ((uint32_t)0x02) /*!< CRC error */
|
|
#define HAL_SPI_ERROR_OVR ((uint32_t)0x04) /*!< OVR error */
|
|
#define HAL_SPI_ERROR_DMA ((uint32_t)0x08) /*!< DMA transfer error */
|
|
#define HAL_SPI_ERROR_FLAG ((uint32_t)0x10) /*!< Flag: RXNE,TXE, BSY */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
|
|
|
|
/** @defgroup SPI_mode SPI mode
|
|
* @{
|
|
*/
|
|
#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
|
|
#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_Direction_mode SPI Direction mode
|
|
* @{
|
|
*/
|
|
#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000)
|
|
#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
|
|
#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_data_size SPI data size
|
|
* @{
|
|
*/
|
|
#define SPI_DATASIZE_8BIT ((uint32_t)0x00000000)
|
|
#define SPI_DATASIZE_16BIT SPI_CR1_DFF
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
|
|
* @{
|
|
*/
|
|
#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
|
|
#define SPI_POLARITY_HIGH SPI_CR1_CPOL
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_Clock_Phase SPI Clock Phase
|
|
* @{
|
|
*/
|
|
#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
|
|
#define SPI_PHASE_2EDGE SPI_CR1_CPHA
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_Slave_Select_management SPI Slave Select management
|
|
* @{
|
|
*/
|
|
#define SPI_NSS_SOFT SPI_CR1_SSM
|
|
#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
|
|
#define SPI_NSS_HARD_OUTPUT ((uint32_t)(SPI_CR2_SSOE << 16))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
|
|
* @{
|
|
*/
|
|
#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
|
|
#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)SPI_CR1_BR_0)
|
|
#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)SPI_CR1_BR_1)
|
|
#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)SPI_CR1_BR_1 | SPI_CR1_BR_0)
|
|
#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)SPI_CR1_BR_2)
|
|
#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)SPI_CR1_BR_2 | SPI_CR1_BR_0)
|
|
#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)SPI_CR1_BR_2 | SPI_CR1_BR_1)
|
|
#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission
|
|
* @{
|
|
*/
|
|
#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
|
|
#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_TI_mode SPI TI mode disable
|
|
* @brief SPI TI Mode not supported for STM32F1xx family
|
|
* @{
|
|
*/
|
|
#define SPI_TIMODE_DISABLE ((uint32_t)0x00000000)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
|
|
* @{
|
|
*/
|
|
#define SPI_CRCCALCULATION_DISABLE ((uint32_t)0x00000000)
|
|
#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_Interrupt_configuration_definition SPI Interrupt configuration definition
|
|
* @{
|
|
*/
|
|
#define SPI_IT_TXE SPI_CR2_TXEIE
|
|
#define SPI_IT_RXNE SPI_CR2_RXNEIE
|
|
#define SPI_IT_ERR SPI_CR2_ERRIE
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup SPI_Flag_definition SPI Flag definition
|
|
* @{
|
|
*/
|
|
#define SPI_FLAG_RXNE SPI_SR_RXNE
|
|
#define SPI_FLAG_TXE SPI_SR_TXE
|
|
#define SPI_FLAG_CRCERR SPI_SR_CRCERR
|
|
#define SPI_FLAG_MODF SPI_SR_MODF
|
|
#define SPI_FLAG_OVR SPI_SR_OVR
|
|
#define SPI_FLAG_BSY SPI_SR_BSY
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup SPI_Private_Constants SPI Private Constants
|
|
* @{
|
|
*/
|
|
#define SPI_INVALID_CRC_ERROR 0 /* CRC error wrongly detected */
|
|
#define SPI_VALID_CRC_ERROR 1 /* CRC error is true */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup SPI_Exported_Macros SPI Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Reset SPI handle state
|
|
* @param __HANDLE__: specifies the SPI handle.
|
|
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
|
|
|
|
/** @brief Enable the specified SPI interrupts.
|
|
* @param __HANDLE__: specifies the SPI handle.
|
|
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
|
* @param __INTERRUPT__: specifies the interrupt source to enable.
|
|
* This parameter can be one of the following values:
|
|
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
|
|
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
|
|
* @arg SPI_IT_ERR: Error interrupt enable
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
|
|
|
|
/** @brief Disable the specified SPI interrupts.
|
|
* @param __HANDLE__: specifies the SPI handle.
|
|
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
|
* @param __INTERRUPT__: specifies the interrupt source to disable.
|
|
* This parameter can be one of the following values:
|
|
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
|
|
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
|
|
* @arg SPI_IT_ERR: Error interrupt enable
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
|
|
|
|
/** @brief Check if the specified SPI interrupt source is enabled or disabled.
|
|
* @param __HANDLE__: specifies the SPI handle.
|
|
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
|
* @param __INTERRUPT__: specifies the SPI interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
|
|
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
|
|
* @arg SPI_IT_ERR: Error interrupt enable
|
|
* @retval The new state of __IT__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
|
|
|
/** @brief Check whether the specified SPI flag is set or not.
|
|
* @param __HANDLE__: specifies the SPI handle.
|
|
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg SPI_FLAG_RXNE: Receive buffer not empty flag
|
|
* @arg SPI_FLAG_TXE: Transmit buffer empty flag
|
|
* @arg SPI_FLAG_CRCERR: CRC error flag
|
|
* @arg SPI_FLAG_MODF: Mode fault flag
|
|
* @arg SPI_FLAG_OVR: Overrun flag
|
|
* @arg SPI_FLAG_BSY: Busy flag
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
|
|
|
|
/** @brief Clear the SPI CRCERR pending flag.
|
|
* @param __HANDLE__: specifies the SPI handle.
|
|
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = ~(SPI_FLAG_CRCERR))
|
|
|
|
/** @brief Clear the SPI MODF pending flag.
|
|
* @param __HANDLE__: specifies the SPI handle.
|
|
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \
|
|
do{ \
|
|
__IO uint32_t tmpreg; \
|
|
tmpreg = (__HANDLE__)->Instance->SR; \
|
|
tmpreg = CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \
|
|
UNUSED(tmpreg); \
|
|
}while(0)
|
|
|
|
/** @brief Clear the SPI OVR pending flag.
|
|
* @param __HANDLE__: specifies the SPI handle.
|
|
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \
|
|
do{ \
|
|
__IO uint32_t tmpreg; \
|
|
tmpreg = (__HANDLE__)->Instance->DR; \
|
|
tmpreg = (__HANDLE__)->Instance->SR; \
|
|
UNUSED(tmpreg); \
|
|
}while(0)
|
|
|
|
|
|
/** @brief Enables the SPI.
|
|
* @param __HANDLE__: specifies the SPI Handle.
|
|
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
|
|
|
|
/** @brief Disables the SPI.
|
|
* @param __HANDLE__: specifies the SPI Handle.
|
|
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Private macros -----------------------------------------------------------*/
|
|
/** @defgroup SPI_Private_Macros SPI Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Checks if SPI Mode parameter is in allowed range.
|
|
* @param __MODE__: specifies the SPI Mode.
|
|
* This parameter can be a value of @ref SPI_mode
|
|
* @retval None
|
|
*/
|
|
#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || ((__MODE__) == SPI_MODE_MASTER))
|
|
|
|
/** @brief Checks if SPI Direction Mode parameter is in allowed range.
|
|
* @param __MODE__: specifies the SPI Direction Mode.
|
|
* This parameter can be a value of @ref SPI_Direction_mode
|
|
* @retval None
|
|
*/
|
|
#define IS_SPI_DIRECTION_MODE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
|
|
((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \
|
|
((__MODE__) == SPI_DIRECTION_1LINE))
|
|
|
|
/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines.
|
|
* @param __MODE__: specifies the SPI Direction Mode.
|
|
* @retval None
|
|
*/
|
|
#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
|
|
((__MODE__) == SPI_DIRECTION_1LINE))
|
|
|
|
/** @brief Checks if SPI Direction Mode parameter is 2 lines.
|
|
* @param __MODE__: specifies the SPI Direction Mode.
|
|
* @retval None
|
|
*/
|
|
#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES)
|
|
|
|
/** @brief Checks if SPI Data Size parameter is in allowed range.
|
|
* @param __DATASIZE__: specifies the SPI Data Size.
|
|
* This parameter can be a value of @ref SPI_data_size
|
|
* @retval None
|
|
*/
|
|
#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \
|
|
((__DATASIZE__) == SPI_DATASIZE_8BIT))
|
|
|
|
/** @brief Checks if SPI Serial clock steady state parameter is in allowed range.
|
|
* @param __CPOL__: specifies the SPI serial clock steady state.
|
|
* This parameter can be a value of @ref SPI_Clock_Polarity
|
|
* @retval None
|
|
*/
|
|
#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \
|
|
((__CPOL__) == SPI_POLARITY_HIGH))
|
|
|
|
/** @brief Checks if SPI Clock Phase parameter is in allowed range.
|
|
* @param __CPHA__: specifies the SPI Clock Phase.
|
|
* This parameter can be a value of @ref SPI_Clock_Phase
|
|
* @retval None
|
|
*/
|
|
#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \
|
|
((__CPHA__) == SPI_PHASE_2EDGE))
|
|
|
|
/** @brief Checks if SPI Slave select parameter is in allowed range.
|
|
* @param __NSS__: specifies the SPI Slave Slelect management parameter.
|
|
* This parameter can be a value of @ref SPI_Slave_Select_management
|
|
* @retval None
|
|
*/
|
|
#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \
|
|
((__NSS__) == SPI_NSS_HARD_INPUT) || \
|
|
((__NSS__) == SPI_NSS_HARD_OUTPUT))
|
|
|
|
/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range.
|
|
* @param __PRESCALER__: specifies the SPI Baudrate prescaler.
|
|
* This parameter can be a value of @ref SPI_BaudRate_Prescaler
|
|
* @retval None
|
|
*/
|
|
#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \
|
|
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \
|
|
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \
|
|
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \
|
|
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \
|
|
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \
|
|
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \
|
|
((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256))
|
|
|
|
/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range.
|
|
* @param __BIT__: specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit).
|
|
* This parameter can be a value of @ref SPI_MSB_LSB_transmission
|
|
* @retval None
|
|
*/
|
|
#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \
|
|
((__BIT__) == SPI_FIRSTBIT_LSB))
|
|
|
|
/** @brief Checks if SPI TI mode parameter is in allowed range.
|
|
* @param __MODE__: specifies the SPI TI mode.
|
|
* This parameter can be a value of @ref SPI_TI_mode
|
|
* @retval None
|
|
*/
|
|
#define IS_SPI_TIMODE(__MODE__) ((__MODE__) == SPI_TIMODE_DISABLE)
|
|
|
|
/** @brief Checks if SPI CRC calculation enabled state is in allowed range.
|
|
* @param __CALCULATION__: specifies the SPI CRC calculation enable state.
|
|
* This parameter can be a value of @ref SPI_CRC_Calculation
|
|
* @retval None
|
|
*/
|
|
#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \
|
|
((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE))
|
|
|
|
/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range.
|
|
* @param __POLYNOMIAL__: specifies the SPI polynomial value to be used for the CRC calculation.
|
|
* This parameter must be a number between Min_Data = 0 and Max_Data = 65535
|
|
* @retval None
|
|
*/
|
|
#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1) && ((__POLYNOMIAL__) <= 0xFFFF))
|
|
|
|
/** @brief Sets the SPI transmit-only mode.
|
|
* @param __HANDLE__: specifies the SPI Handle.
|
|
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
|
* @retval None
|
|
*/
|
|
#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
|
|
|
|
/** @brief Sets the SPI receive-only mode.
|
|
* @param __HANDLE__: specifies the SPI Handle.
|
|
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
|
* @retval None
|
|
*/
|
|
#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
|
|
|
|
/** @brief Resets the CRC calculation of the SPI.
|
|
* @param __HANDLE__: specifies the SPI Handle.
|
|
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
|
|
* @retval None
|
|
*/
|
|
#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\
|
|
SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup SPI_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/* Initialization/de-initialization functions **********************************/
|
|
/** @addtogroup SPI_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
|
|
HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
|
|
void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
|
|
void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* I/O operation functions *****************************************************/
|
|
/** @addtogroup SPI_Exported_Functions_Group2
|
|
* @{
|
|
*/
|
|
HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
|
|
HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
|
|
HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
|
|
|
|
void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
|
|
void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
|
|
void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
|
|
void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
|
|
void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
|
|
void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
|
|
void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
|
|
void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Peripheral State and Control functions **************************************/
|
|
/** @addtogroup SPI_Exported_Functions_Group3
|
|
* @{
|
|
*/
|
|
HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
|
|
uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Private functions --------------------------------------------------------*/
|
|
/** @addtogroup SPI_Private_Functions
|
|
* @{
|
|
*/
|
|
uint8_t SPI_ISCRCErrorValid(SPI_HandleTypeDef *hspi);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F1xx_HAL_SPI_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|