You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
751 lines
34 KiB
751 lines
34 KiB
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_hal_uart.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.4
|
|
* @date 29-April-2016
|
|
* @brief Header file of UART HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F1xx_HAL_UART_H
|
|
#define __STM32F1xx_HAL_UART_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup UART
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup UART_Exported_Types UART Exported Types
|
|
* @{
|
|
*/
|
|
|
|
|
|
/**
|
|
* @brief UART Init Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
|
|
The baud rate is computed using the following formula:
|
|
- IntegerDivider = ((PCLKx) / (16 * (huart->Init.BaudRate)))
|
|
- FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */
|
|
|
|
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
|
|
This parameter can be a value of @ref UART_Word_Length */
|
|
|
|
uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
|
|
This parameter can be a value of @ref UART_Stop_Bits */
|
|
|
|
uint32_t Parity; /*!< Specifies the parity mode.
|
|
This parameter can be a value of @ref UART_Parity
|
|
@note When parity is enabled, the computed parity is inserted
|
|
at the MSB position of the transmitted data (9th bit when
|
|
the word length is set to 9 data bits; 8th bit when the
|
|
word length is set to 8 data bits). */
|
|
|
|
uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
|
|
This parameter can be a value of @ref UART_Mode */
|
|
|
|
uint32_t HwFlowCtl; /*!< Specifies wether the hardware flow control mode is enabled
|
|
or disabled.
|
|
This parameter can be a value of @ref UART_Hardware_Flow_Control */
|
|
|
|
uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
|
|
This parameter can be a value of @ref UART_Over_Sampling. This feature is not available
|
|
on STM32F1xx family, so OverSampling parameter should always be set to 16. */
|
|
}UART_InitTypeDef;
|
|
|
|
/**
|
|
* @brief HAL UART State structures definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
|
|
HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
|
|
HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
|
|
HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
|
|
HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
|
|
HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
|
|
HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
|
|
HAL_UART_STATE_ERROR = 0x04 /*!< Error */
|
|
}HAL_UART_StateTypeDef;
|
|
|
|
|
|
/**
|
|
* @brief UART handle Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
USART_TypeDef *Instance; /*!< UART registers base address */
|
|
|
|
UART_InitTypeDef Init; /*!< UART communication parameters */
|
|
|
|
uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
|
|
|
|
uint16_t TxXferSize; /*!< UART Tx Transfer size */
|
|
|
|
uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
|
|
|
|
uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
|
|
|
|
uint16_t RxXferSize; /*!< UART Rx Transfer size */
|
|
|
|
uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
|
|
|
|
DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
|
|
|
|
DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
|
|
|
|
HAL_LockTypeDef Lock; /*!< Locking object */
|
|
|
|
__IO HAL_UART_StateTypeDef State; /*!< UART communication state */
|
|
|
|
__IO uint32_t ErrorCode; /*!< UART Error code */
|
|
|
|
}UART_HandleTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup UART_Exported_Constants UART Exported constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup UART_Error_Codes UART Error Codes
|
|
* @{
|
|
*/
|
|
|
|
#define HAL_UART_ERROR_NONE ((uint32_t)0x00) /*!< No error */
|
|
#define HAL_UART_ERROR_PE ((uint32_t)0x01) /*!< Parity error */
|
|
#define HAL_UART_ERROR_NE ((uint32_t)0x02) /*!< Noise error */
|
|
#define HAL_UART_ERROR_FE ((uint32_t)0x04) /*!< frame error */
|
|
#define HAL_UART_ERROR_ORE ((uint32_t)0x08) /*!< Overrun error */
|
|
#define HAL_UART_ERROR_DMA ((uint32_t)0x10) /*!< DMA transfer error */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
|
|
|
|
/** @defgroup UART_Word_Length UART Word Length
|
|
* @{
|
|
*/
|
|
#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
|
|
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Stop_Bits UART Number of Stop Bits
|
|
* @{
|
|
*/
|
|
#define UART_STOPBITS_1 ((uint32_t)0x00000000)
|
|
#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Parity UART Parity
|
|
* @{
|
|
*/
|
|
#define UART_PARITY_NONE ((uint32_t)0x00000000)
|
|
#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
|
|
#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
|
|
* @{
|
|
*/
|
|
#define UART_HWCONTROL_NONE ((uint32_t)0x00000000)
|
|
#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
|
|
#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
|
|
#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Mode UART Transfer Mode
|
|
* @{
|
|
*/
|
|
#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
|
|
#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
|
|
#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_State UART State
|
|
* @{
|
|
*/
|
|
#define UART_STATE_DISABLE ((uint32_t)0x00000000)
|
|
#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Over_Sampling UART Over Sampling
|
|
* @{
|
|
*/
|
|
#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length
|
|
* @{
|
|
*/
|
|
#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
|
|
#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_WakeUp_functions UART Wakeup Functions
|
|
* @{
|
|
*/
|
|
#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000)
|
|
#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Flags UART FLags
|
|
* Elements values convention: 0xXXXX
|
|
* - 0xXXXX : Flag mask in the SR register
|
|
* @{
|
|
*/
|
|
#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS)
|
|
#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD)
|
|
#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE)
|
|
#define UART_FLAG_TC ((uint32_t)USART_SR_TC)
|
|
#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
|
|
#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
|
|
#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE)
|
|
#define UART_FLAG_NE ((uint32_t)USART_SR_NE)
|
|
#define UART_FLAG_FE ((uint32_t)USART_SR_FE)
|
|
#define UART_FLAG_PE ((uint32_t)USART_SR_PE)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup UART_Interrupt_definition UART Interrupt Definitions
|
|
* Elements values convention: 0xY000XXXX
|
|
* - XXXX : Interrupt mask (16 bits) in the Y register
|
|
* - Y : Interrupt source register (2bits)
|
|
* - 0001: CR1 register
|
|
* - 0010: CR2 register
|
|
* - 0011: CR3 register
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_PEIE))
|
|
#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TXEIE))
|
|
#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TCIE))
|
|
#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE))
|
|
#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE))
|
|
|
|
#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28 | USART_CR2_LBDIE))
|
|
|
|
#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_CTSIE))
|
|
#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_EIE))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup UART_Exported_Macros UART Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
|
|
/** @brief Reset UART handle state
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
|
|
|
|
/** @brief Flush the UART DR register
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
*/
|
|
#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
|
|
|
|
/** @brief Check whether the specified UART flag is set or not.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
|
|
* @arg UART_FLAG_LBD: LIN Break detection flag
|
|
* @arg UART_FLAG_TXE: Transmit data register empty flag
|
|
* @arg UART_FLAG_TC: Transmission Complete flag
|
|
* @arg UART_FLAG_RXNE: Receive data register not empty flag
|
|
* @arg UART_FLAG_IDLE: Idle Line detection flag
|
|
* @arg UART_FLAG_ORE: OverRun Error flag
|
|
* @arg UART_FLAG_NE: Noise Error flag
|
|
* @arg UART_FLAG_FE: Framing Error flag
|
|
* @arg UART_FLAG_PE: Parity Error flag
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
|
|
|
|
/** @brief Clear the specified UART pending flag.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
|
|
* @arg UART_FLAG_LBD: LIN Break detection flag.
|
|
* @arg UART_FLAG_TC: Transmission Complete flag.
|
|
* @arg UART_FLAG_RXNE: Receive data register not empty flag.
|
|
*
|
|
* @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
|
|
* error) and IDLE (Idle line detected) flags are cleared by software
|
|
* sequence: a read operation to USART_SR register followed by a read
|
|
* operation to USART_DR register.
|
|
* @note RXNE flag can be also cleared by a read to the USART_DR register.
|
|
* @note TC flag can be also cleared by software sequence: a read operation to
|
|
* USART_SR register followed by a write operation to USART_DR register.
|
|
* @note TXE flag is cleared only by a write to the USART_DR register.
|
|
*
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
|
|
|
|
/** @brief Clear the UART PE pending flag.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \
|
|
do{ \
|
|
__IO uint32_t tmpreg; \
|
|
tmpreg = (__HANDLE__)->Instance->SR; \
|
|
tmpreg = (__HANDLE__)->Instance->DR; \
|
|
UNUSED(tmpreg); \
|
|
}while(0)
|
|
|
|
|
|
|
|
/** @brief Clear the UART FE pending flag.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
|
|
|
/** @brief Clear the UART NE pending flag.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
|
|
|
/** @brief Clear the UART ORE pending flag.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
|
|
|
/** @brief Clear the UART IDLE pending flag.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
|
|
|
|
/** @brief Enable the specified UART interrupt.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
* @param __INTERRUPT__: specifies the UART interrupt source to enable.
|
|
* This parameter can be one of the following values:
|
|
* @arg UART_IT_CTS: CTS change interrupt
|
|
* @arg UART_IT_LBD: LIN Break detection interrupt
|
|
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
|
|
* @arg UART_IT_TC: Transmission complete interrupt
|
|
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
|
|
* @arg UART_IT_IDLE: Idle line detection interrupt
|
|
* @arg UART_IT_PE: Parity Error interrupt
|
|
* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
|
|
(((__INTERRUPT__) >> 28) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
|
|
((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
|
|
|
|
|
|
/** @brief Disable the specified UART interrupt.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
* @param __INTERRUPT__: specifies the UART interrupt source to disable.
|
|
* This parameter can be one of the following values:
|
|
* @arg UART_IT_CTS: CTS change interrupt
|
|
* @arg UART_IT_LBD: LIN Break detection interrupt
|
|
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
|
|
* @arg UART_IT_TC: Transmission complete interrupt
|
|
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
|
|
* @arg UART_IT_IDLE: Idle line detection interrupt
|
|
* @arg UART_IT_PE: Parity Error interrupt
|
|
* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
|
|
(((__INTERRUPT__) >> 28) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
|
|
((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
|
|
|
|
/** @brief Check whether the specified UART interrupt has occurred or not.
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
* @param __IT__: specifies the UART interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
|
|
* @arg UART_IT_LBD: LIN Break detection interrupt
|
|
* @arg UART_IT_TXE: Transmit Data Register empty interrupt
|
|
* @arg UART_IT_TC: Transmission complete interrupt
|
|
* @arg UART_IT_RXNE: Receive Data register not empty interrupt
|
|
* @arg UART_IT_IDLE: Idle line detection interrupt
|
|
* @arg UART_IT_ERR: Error interrupt
|
|
* @retval The new state of __IT__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == UART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == UART_CR2_REG_INDEX)? \
|
|
(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
|
|
|
|
/** @brief Enable CTS flow control
|
|
* This macro allows to enable CTS hardware flow control for a given UART instance,
|
|
* without need to call HAL_UART_Init() function.
|
|
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
|
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
|
|
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
|
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
|
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
|
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be any USARTx (supporting the HW Flow control feature).
|
|
* It is used to select the USART peripheral (USART availability and x value depending on device).
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
|
|
do{ \
|
|
SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
|
|
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
|
|
} while(0)
|
|
|
|
/** @brief Disable CTS flow control
|
|
* This macro allows to disable CTS hardware flow control for a given UART instance,
|
|
* without need to call HAL_UART_Init() function.
|
|
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
|
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
|
|
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
|
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
|
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
|
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be any USARTx (supporting the HW Flow control feature).
|
|
* It is used to select the USART peripheral (USART availability and x value depending on device).
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
|
|
do{ \
|
|
CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
|
|
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
|
|
} while(0)
|
|
|
|
/** @brief Enable RTS flow control
|
|
* This macro allows to enable RTS hardware flow control for a given UART instance,
|
|
* without need to call HAL_UART_Init() function.
|
|
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
|
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
|
|
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
|
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
|
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
|
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be any USARTx (supporting the HW Flow control feature).
|
|
* It is used to select the USART peripheral (USART availability and x value depending on device).
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
|
|
do{ \
|
|
SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
|
|
(__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
|
|
} while(0)
|
|
|
|
/** @brief Disable RTS flow control
|
|
* This macro allows to disable RTS hardware flow control for a given UART instance,
|
|
* without need to call HAL_UART_Init() function.
|
|
* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
|
|
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
|
|
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
|
|
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
|
|
* - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
|
|
* and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* This parameter can be any USARTx (supporting the HW Flow control feature).
|
|
* It is used to select the USART peripheral (USART availability and x value depending on device).
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
|
|
do{ \
|
|
CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
|
|
(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
|
|
} while(0)
|
|
|
|
|
|
/** @brief Enable UART
|
|
* @param __HANDLE__: specifies the UART Handle.
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
|
|
|
|
/** @brief Disable UART
|
|
* UART Handle selects the USARTx or UARTy peripheral
|
|
* (USART,UART availability and x,y values depending on device).
|
|
* @retval None
|
|
*/
|
|
#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Private macros --------------------------------------------------------*/
|
|
/** @defgroup UART_Private_Macros UART Private Macros
|
|
* @{
|
|
*/
|
|
|
|
#define UART_CR1_REG_INDEX 1
|
|
#define UART_CR2_REG_INDEX 2
|
|
#define UART_CR3_REG_INDEX 3
|
|
|
|
#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
|
|
#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100)
|
|
#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
|
|
/* UART BRR = mantissa + overflow + fraction
|
|
= (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0F) */
|
|
#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4) + \
|
|
(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0)) + \
|
|
(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0F))
|
|
#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
|
|
((LENGTH) == UART_WORDLENGTH_9B))
|
|
#define IS_UART_LIN_WORD_LENGTH(LENGTH) ((LENGTH) == UART_WORDLENGTH_8B)
|
|
|
|
#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
|
|
((STOPBITS) == UART_STOPBITS_2))
|
|
|
|
#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
|
|
((PARITY) == UART_PARITY_EVEN) || \
|
|
((PARITY) == UART_PARITY_ODD))
|
|
|
|
#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
|
|
(((CONTROL) == UART_HWCONTROL_NONE) || \
|
|
((CONTROL) == UART_HWCONTROL_RTS) || \
|
|
((CONTROL) == UART_HWCONTROL_CTS) || \
|
|
((CONTROL) == UART_HWCONTROL_RTS_CTS))
|
|
|
|
#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)UART_MODE_TX_RX))) == 0x00) && \
|
|
((MODE) != (uint32_t)0x00000000))
|
|
|
|
#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
|
|
((STATE) == UART_STATE_ENABLE))
|
|
|
|
#define IS_UART_OVERSAMPLING(SAMPLING) ((SAMPLING) == UART_OVERSAMPLING_16)
|
|
#define IS_UART_LIN_OVERSAMPLING(SAMPLING) ((SAMPLING) == UART_OVERSAMPLING_16)
|
|
|
|
#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
|
|
((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
|
|
|
|
#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
|
|
((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
|
|
|
|
|
|
/** Check UART Baud rate
|
|
* __BAUDRATE__: Baudrate specified by the user
|
|
* The maximum Baud Rate is derived from the maximum clock on APB (i.e. 72 MHz)
|
|
* divided by the smallest oversampling used on the USART (i.e. 16)
|
|
* Retrun : TRUE or FALSE
|
|
*/
|
|
#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001)
|
|
|
|
/** Check UART Node Address
|
|
* __ADDRESS__: UART Node address specified by the user
|
|
* UART Node address is used in Multi processor communication for wakeup
|
|
* with address mark detection.
|
|
* This parameter must be a number between Min_Data = 0 and Max_Data = 15
|
|
* Return : TRUE or FALSE
|
|
*/
|
|
#define IS_UART_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF)
|
|
|
|
/** UART interruptions flag mask
|
|
*/
|
|
#define UART_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
|
|
USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE )
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/** @addtogroup UART_Exported_Functions UART Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @{
|
|
*/
|
|
|
|
/* Initialization and de-initialization functions ****************************/
|
|
HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
|
|
HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
|
|
HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
|
|
void HAL_UART_MspInit(UART_HandleTypeDef *huart);
|
|
void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
|
|
* @{
|
|
*/
|
|
|
|
/* IO operation functions *****************************************************/
|
|
HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
|
|
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
|
|
void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
|
|
void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
|
|
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
|
|
void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
|
|
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions
|
|
* @{
|
|
*/
|
|
|
|
/* Peripheral Control functions ************************************************/
|
|
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
|
|
HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Errors functions
|
|
* @{
|
|
*/
|
|
|
|
/* Peripheral State and Errors functions **************************************************/
|
|
HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
|
|
uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F1xx_HAL_UART_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|