/** ****************************************************************************** * @file stm32f1xx_hal_rtc_ex.c * @author MCD Application Team * @version V1.0.4 * @date 29-April-2016 * @brief Extended RTC HAL module driver. * This file provides firmware functions to manage the following * functionalities of the Real Time Clock (RTC) Extension peripheral: * + RTC Tamper functions * + Extension Control functions * + Extension RTC features functions * ****************************************************************************** * @attention * *

© COPYRIGHT(c) 2016 STMicroelectronics

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32f1xx_hal.h" /** @addtogroup STM32F1xx_HAL_Driver * @{ */ #ifdef HAL_RTC_MODULE_ENABLED /** @defgroup RTCEx RTCEx * @brief RTC Extended HAL module driver * @{ */ /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* Private macro -------------------------------------------------------------*/ /** @defgroup RTCEx_Private_Macros RTCEx Private Macros * @{ */ /** * @} */ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /* Private functions ---------------------------------------------------------*/ /** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions * @{ */ /** @defgroup RTCEx_Exported_Functions_Group1 RTC Tamper functions * @brief RTC Tamper functions * @verbatim =============================================================================== ##### RTC Tamper functions ##### =============================================================================== [..] This section provides functions allowing to configure Tamper feature @endverbatim * @{ */ /** * @brief Sets Tamper * @note By calling this API we disable the tamper interrupt for all tampers. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param sTamper: Pointer to Tamper Structure. * @note Tamper can be enabled only if ASOE and CCO bit are reset * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper) { /* Check input parameters */ if((hrtc == NULL) || (sTamper == NULL)) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_RTC_TAMPER(sTamper->Tamper)); assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; if (HAL_IS_BIT_SET(BKP->RTCCR,(BKP_RTCCR_CCO | BKP_RTCCR_ASOE))) { hrtc->State = HAL_RTC_STATE_ERROR; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_ERROR; } MODIFY_REG(BKP->CR, (BKP_CR_TPE | BKP_CR_TPAL), (sTamper->Tamper | (sTamper->Trigger))); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Sets Tamper with interrupt. * @note By calling this API we force the tamper interrupt for all tampers. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param sTamper: Pointer to RTC Tamper. * @note Tamper can be enabled only if ASOE and CCO bit are reset * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper) { /* Check input parameters */ if((hrtc == NULL) || (sTamper == NULL)) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_RTC_TAMPER(sTamper->Tamper)); assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; if (HAL_IS_BIT_SET(BKP->RTCCR,(BKP_RTCCR_CCO | BKP_RTCCR_ASOE))) { hrtc->State = HAL_RTC_STATE_ERROR; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_ERROR; } MODIFY_REG(BKP->CR, (BKP_CR_TPE | BKP_CR_TPAL), (sTamper->Tamper | (sTamper->Trigger))); /* Configure the Tamper Interrupt in the BKP->CSR */ __HAL_RTC_TAMPER_ENABLE_IT(hrtc, RTC_IT_TAMP1); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Deactivates Tamper. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param Tamper: Selected tamper pin. * This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper) { /* Check input parameters */ if(hrtc == NULL) { return HAL_ERROR; } assert_param(IS_RTC_TAMPER(Tamper)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the selected Tamper pin */ CLEAR_BIT(BKP->CR, BKP_CR_TPE); /* Disable the Tamper Interrupt in the BKP->CSR */ /* Configure the Tamper Interrupt in the BKP->CSR */ __HAL_RTC_TAMPER_DISABLE_IT(hrtc, RTC_IT_TAMP1); /* Clear the Tamper interrupt pending bit */ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F); SET_BIT(BKP->CSR, BKP_CSR_CTE); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief This function handles Tamper interrupt request. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval None */ void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc) { /* Get the status of the Interrupt */ if(__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP1)) { /* Get the TAMPER Interrupt enable bit and pending bit */ if(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) != (uint32_t)RESET) { /* Tamper callback */ HAL_RTCEx_Tamper1EventCallback(hrtc); /* Clear the Tamper interrupt pending bit */ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F); } } /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; } /** * @brief Tamper 1 callback. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval None */ __weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file */ } /** * @brief This function handles Tamper1 Polling. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param Timeout: Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout) { uint32_t tickstart = HAL_GetTick(); /* Check input parameters */ if(hrtc == NULL) { return HAL_ERROR; } /* Get the status of the Interrupt */ while(__HAL_RTC_TAMPER_GET_FLAG(hrtc,RTC_FLAG_TAMP1F)== RESET) { if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) { hrtc->State = HAL_RTC_STATE_TIMEOUT; return HAL_TIMEOUT; } } } /* Clear the Tamper Flag */ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; return HAL_OK; } /** * @} */ /** @defgroup RTCEx_Exported_Functions_Group2 RTC Second functions * @brief RTC Second functions * @verbatim =============================================================================== ##### RTC Second functions ##### =============================================================================== [..] This section provides functions implementing second interupt handlers @endverbatim * @{ */ /** * @brief Sets Interrupt for second * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetSecond_IT(RTC_HandleTypeDef *hrtc) { /* Check input parameters */ if(hrtc == NULL) { return HAL_ERROR; } /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Enable Second interuption */ __HAL_RTC_SECOND_ENABLE_IT(hrtc, RTC_IT_SEC); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Deactivates Second. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateSecond(RTC_HandleTypeDef *hrtc) { /* Check input parameters */ if(hrtc == NULL) { return HAL_ERROR; } /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Deactivate Second interuption*/ __HAL_RTC_SECOND_DISABLE_IT(hrtc, RTC_IT_SEC); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief This function handles second interrupt request. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval None */ void HAL_RTCEx_RTCIRQHandler(RTC_HandleTypeDef* hrtc) { if(__HAL_RTC_SECOND_GET_IT_SOURCE(hrtc, RTC_IT_SEC)) { /* Get the status of the Interrupt */ if(__HAL_RTC_SECOND_GET_FLAG(hrtc, RTC_FLAG_SEC)) { /* Check if Overrun occurred */ if (__HAL_RTC_SECOND_GET_FLAG(hrtc, RTC_FLAG_OW)) { /* Second error callback */ HAL_RTCEx_RTCEventErrorCallback(hrtc); /* Clear flag Second */ __HAL_RTC_OVERFLOW_CLEAR_FLAG(hrtc, RTC_FLAG_OW); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_ERROR; } else { /* Second callback */ HAL_RTCEx_RTCEventCallback(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; } /* Clear flag Second */ __HAL_RTC_SECOND_CLEAR_FLAG(hrtc, RTC_FLAG_SEC); } } } /** * @brief Second event callback. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval None */ __weak void HAL_RTCEx_RTCEventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_RTCEx_RTCEventCallback could be implemented in the user file */ } /** * @brief Second event error callback. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval None */ __weak void HAL_RTCEx_RTCEventErrorCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function Should not be modified, when the callback is needed, the HAL_RTCEx_RTCEventErrorCallback could be implemented in the user file */ } /** * @} */ /** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions * @brief Extended Peripheral Control functions * @verbatim =============================================================================== ##### Extension Peripheral Control functions ##### =============================================================================== [..] This subsection provides functions allowing to (+) Writes a data in a specified RTC Backup data register (+) Read a data in a specified RTC Backup data register (+) Sets the Smooth calibration parameters. @endverbatim * @{ */ /** * @brief Writes a data in a specified RTC Backup data register. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param BackupRegister: RTC Backup data Register number. * This parameter can be: RTC_BKP_DRx where x can be from 1 to 10 (or 42) to * specify the register (depending devices). * @param Data: Data to be written in the specified RTC Backup data register. * @retval None */ void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data) { uint32_t tmp = 0; /* Check the parameters */ assert_param(IS_RTC_BKP(BackupRegister)); tmp = (uint32_t)BKP_BASE; tmp += (BackupRegister * 4); *(__IO uint32_t *) tmp = (Data & BKP_DR1_D); } /** * @brief Reads data from the specified RTC Backup data Register. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param BackupRegister: RTC Backup data Register number. * This parameter can be: RTC_BKP_DRx where x can be from 1 to 10 (or 42) to * specify the register (depending devices). * @retval Read value */ uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister) { uint32_t backupregister = 0; uint32_t pvalue = 0; /* Check the parameters */ assert_param(IS_RTC_BKP(BackupRegister)); backupregister = (uint32_t)BKP_BASE; backupregister += (BackupRegister * 4); pvalue = (*(__IO uint32_t *)(backupregister)) & BKP_DR1_D; /* Read the specified register */ return pvalue; } /** * @brief Sets the Smooth calibration parameters. * @param hrtc: RTC handle * @param SmoothCalibPeriod: Not used (only present for compatibility with another families) * @param SmoothCalibPlusPulses: Not used (only present for compatibility with another families) * @param SmouthCalibMinusPulsesValue: specifies the RTC Clock Calibration value. * This parameter must be a number between 0 and 0x7F. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue) { /* Check input parameters */ if(hrtc == NULL) { return HAL_ERROR; } /* Check the parameters */ assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmouthCalibMinusPulsesValue)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Sets RTC Clock Calibration value.*/ MODIFY_REG(BKP->RTCCR, BKP_RTCCR_CAL, SmouthCalibMinusPulsesValue); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @} */ /** * @} */ /** * @} */ #endif /* HAL_RTC_MODULE_ENABLED */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/