/** ****************************************************************************** * @file stm32f1xx_hal_gpio_ex.h * @author MCD Application Team * @version V1.0.4 * @date 29-April-2016 * @brief Header file of GPIO HAL Extension module. ****************************************************************************** * @attention * *

© COPYRIGHT(c) 2016 STMicroelectronics

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F1xx_HAL_GPIO_EX_H #define __STM32F1xx_HAL_GPIO_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f1xx_hal_def.h" /** @addtogroup STM32F1xx_HAL_Driver * @{ */ /** @defgroup GPIOEx GPIOEx * @{ */ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ /** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants * @{ */ /** @defgroup GPIOEx_EVENTOUT EVENTOUT Cortex Configuration * @brief This section propose definition to use the Cortex EVENTOUT signal. * @{ */ /** @defgroup GPIOEx_EVENTOUT_PIN EVENTOUT Pin * @{ */ #define AFIO_EVENTOUT_PIN_0 AFIO_EVCR_PIN_PX0 /*!< EVENTOUT on pin 0 */ #define AFIO_EVENTOUT_PIN_1 AFIO_EVCR_PIN_PX1 /*!< EVENTOUT on pin 1 */ #define AFIO_EVENTOUT_PIN_2 AFIO_EVCR_PIN_PX2 /*!< EVENTOUT on pin 2 */ #define AFIO_EVENTOUT_PIN_3 AFIO_EVCR_PIN_PX3 /*!< EVENTOUT on pin 3 */ #define AFIO_EVENTOUT_PIN_4 AFIO_EVCR_PIN_PX4 /*!< EVENTOUT on pin 4 */ #define AFIO_EVENTOUT_PIN_5 AFIO_EVCR_PIN_PX5 /*!< EVENTOUT on pin 5 */ #define AFIO_EVENTOUT_PIN_6 AFIO_EVCR_PIN_PX6 /*!< EVENTOUT on pin 6 */ #define AFIO_EVENTOUT_PIN_7 AFIO_EVCR_PIN_PX7 /*!< EVENTOUT on pin 7 */ #define AFIO_EVENTOUT_PIN_8 AFIO_EVCR_PIN_PX8 /*!< EVENTOUT on pin 8 */ #define AFIO_EVENTOUT_PIN_9 AFIO_EVCR_PIN_PX9 /*!< EVENTOUT on pin 9 */ #define AFIO_EVENTOUT_PIN_10 AFIO_EVCR_PIN_PX10 /*!< EVENTOUT on pin 10 */ #define AFIO_EVENTOUT_PIN_11 AFIO_EVCR_PIN_PX11 /*!< EVENTOUT on pin 11 */ #define AFIO_EVENTOUT_PIN_12 AFIO_EVCR_PIN_PX12 /*!< EVENTOUT on pin 12 */ #define AFIO_EVENTOUT_PIN_13 AFIO_EVCR_PIN_PX13 /*!< EVENTOUT on pin 13 */ #define AFIO_EVENTOUT_PIN_14 AFIO_EVCR_PIN_PX14 /*!< EVENTOUT on pin 14 */ #define AFIO_EVENTOUT_PIN_15 AFIO_EVCR_PIN_PX15 /*!< EVENTOUT on pin 15 */ #define IS_AFIO_EVENTOUT_PIN(__PIN__) (((__PIN__) == AFIO_EVENTOUT_PIN_0) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_1) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_2) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_3) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_4) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_5) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_6) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_7) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_8) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_9) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_10) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_11) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_12) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_13) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_14) || \ ((__PIN__) == AFIO_EVENTOUT_PIN_15)) /** * @} */ /** @defgroup GPIOEx_EVENTOUT_PORT EVENTOUT Port * @{ */ #define AFIO_EVENTOUT_PORT_A AFIO_EVCR_PORT_PA /*!< EVENTOUT on port A */ #define AFIO_EVENTOUT_PORT_B AFIO_EVCR_PORT_PB /*!< EVENTOUT on port B */ #define AFIO_EVENTOUT_PORT_C AFIO_EVCR_PORT_PC /*!< EVENTOUT on port C */ #define AFIO_EVENTOUT_PORT_D AFIO_EVCR_PORT_PD /*!< EVENTOUT on port D */ #define AFIO_EVENTOUT_PORT_E AFIO_EVCR_PORT_PE /*!< EVENTOUT on port E */ #define IS_AFIO_EVENTOUT_PORT(__PORT__) (((__PORT__) == AFIO_EVENTOUT_PORT_A) || \ ((__PORT__) == AFIO_EVENTOUT_PORT_B) || \ ((__PORT__) == AFIO_EVENTOUT_PORT_C) || \ ((__PORT__) == AFIO_EVENTOUT_PORT_D) || \ ((__PORT__) == AFIO_EVENTOUT_PORT_E)) /** * @} */ /** * @} */ /** @defgroup GPIOEx_AFIO_AF_REMAPPING Alternate Function Remapping * @brief This section propose definition to remap the alternate function to some other port/pins. * @{ */ /** * @brief Enable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. * @note ENABLE: Remap (NSS/PA15, SCK/PB3, MISO/PB4, MOSI/PB5) * @retval None */ #define __HAL_AFIO_REMAP_SPI1_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_SPI1_REMAP) /** * @brief Disable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. * @note DISABLE: No remap (NSS/PA4, SCK/PA5, MISO/PA6, MOSI/PA7) * @retval None */ #define __HAL_AFIO_REMAP_SPI1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SPI1_REMAP) /** * @brief Enable the remapping of I2C1 alternate function SCL and SDA. * @note ENABLE: Remap (SCL/PB8, SDA/PB9) * @retval None */ #define __HAL_AFIO_REMAP_I2C1_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_I2C1_REMAP) /** * @brief Disable the remapping of I2C1 alternate function SCL and SDA. * @note DISABLE: No remap (SCL/PB6, SDA/PB7) * @retval None */ #define __HAL_AFIO_REMAP_I2C1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_I2C1_REMAP) /** * @brief Enable the remapping of USART1 alternate function TX and RX. * @note ENABLE: Remap (TX/PB6, RX/PB7) * @retval None */ #define __HAL_AFIO_REMAP_USART1_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_USART1_REMAP) /** * @brief Disable the remapping of USART1 alternate function TX and RX. * @note DISABLE: No remap (TX/PA9, RX/PA10) * @retval None */ #define __HAL_AFIO_REMAP_USART1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART1_REMAP) /** * @brief Enable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. * @note ENABLE: Remap (CTS/PD3, RTS/PD4, TX/PD5, RX/PD6, CK/PD7) * @retval None */ #define __HAL_AFIO_REMAP_USART2_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_USART2_REMAP) /** * @brief Disable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. * @note DISABLE: No remap (CTS/PA0, RTS/PA1, TX/PA2, RX/PA3, CK/PA4) * @retval None */ #define __HAL_AFIO_REMAP_USART2_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART2_REMAP) /** * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. * @note ENABLE: Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) * @retval None */ #define __HAL_AFIO_REMAP_USART3_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_USART3_REMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) /** * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. * @note PARTIAL: Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) * @retval None */ #define __HAL_AFIO_REMAP_USART3_PARTIAL() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_USART3_REMAP, AFIO_MAPR_USART3_REMAP_PARTIALREMAP) /** * @brief Disable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. * @note DISABLE: No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) * @retval None */ #define __HAL_AFIO_REMAP_USART3_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_USART3_REMAP, AFIO_MAPR_USART3_REMAP_NOREMAP) /** * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) * @note ENABLE: Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) * @retval None */ #define __HAL_AFIO_REMAP_TIM1_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) /** * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) * @note PARTIAL: Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) * @retval None */ #define __HAL_AFIO_REMAP_TIM1_PARTIAL() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP, AFIO_MAPR_TIM1_REMAP_PARTIALREMAP) /** * @brief Disable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) * @note DISABLE: No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) * @retval None */ #define __HAL_AFIO_REMAP_TIM1_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP, AFIO_MAPR_TIM1_REMAP_NOREMAP) /** * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) * @note ENABLE: Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) * @retval None */ #define __HAL_AFIO_REMAP_TIM2_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP) /** * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) * @note PARTIAL_2: Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) * @retval None */ #define __HAL_AFIO_REMAP_TIM2_PARTIAL_2() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2) /** * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) * @note PARTIAL_1: Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) * @retval None */ #define __HAL_AFIO_REMAP_TIM2_PARTIAL_1() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1) /** * @brief Disable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) * @note DISABLE: No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) * @retval None */ #define __HAL_AFIO_REMAP_TIM2_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_NOREMAP) /** * @brief Enable the remapping of TIM3 alternate function channels 1 to 4 * @note ENABLE: Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) * @note TIM3_ETR on PE0 is not re-mapped. * @retval None */ #define __HAL_AFIO_REMAP_TIM3_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) /** * @brief Enable the remapping of TIM3 alternate function channels 1 to 4 * @note PARTIAL: Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) * @note TIM3_ETR on PE0 is not re-mapped. * @retval None */ #define __HAL_AFIO_REMAP_TIM3_PARTIAL() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP, AFIO_MAPR_TIM3_REMAP_PARTIALREMAP) /** * @brief Disable the remapping of TIM3 alternate function channels 1 to 4 * @note DISABLE: No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) * @note TIM3_ETR on PE0 is not re-mapped. * @retval None */ #define __HAL_AFIO_REMAP_TIM3_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP, AFIO_MAPR_TIM3_REMAP_NOREMAP) /** * @brief Enable the remapping of TIM4 alternate function channels 1 to 4. * @note ENABLE: Full remap (TIM4_CH1/PD12, TIM4_CH2/PD13, TIM4_CH3/PD14, TIM4_CH4/PD15) * @note TIM4_ETR on PE0 is not re-mapped. * @retval None */ #define __HAL_AFIO_REMAP_TIM4_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM4_REMAP) /** * @brief Disable the remapping of TIM4 alternate function channels 1 to 4. * @note DISABLE: No remap (TIM4_CH1/PB6, TIM4_CH2/PB7, TIM4_CH3/PB8, TIM4_CH4/PB9) * @note TIM4_ETR on PE0 is not re-mapped. * @retval None */ #define __HAL_AFIO_REMAP_TIM4_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM4_REMAP) #if defined(AFIO_MAPR_CAN_REMAP_REMAP1) /** * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. * @note CASE 1: CAN_RX mapped to PA11, CAN_TX mapped to PA12 * @retval None */ #define __HAL_AFIO_REMAP_CAN1_1() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_CAN_REMAP, AFIO_MAPR_CAN_REMAP_REMAP1) /** * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. * @note CASE 2: CAN_RX mapped to PB8, CAN_TX mapped to PB9 (not available on 36-pin package) * @retval None */ #define __HAL_AFIO_REMAP_CAN1_2() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_CAN_REMAP, AFIO_MAPR_CAN_REMAP_REMAP2) /** * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. * @note CASE 3: CAN_RX mapped to PD0, CAN_TX mapped to PD1 * @retval None */ #define __HAL_AFIO_REMAP_CAN1_3() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_CAN_REMAP, AFIO_MAPR_CAN_REMAP_REMAP3) #endif /** * @brief Enable the remapping of PD0 and PD1. When the HSE oscillator is not used * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available * on 100-pin and 144-pin packages, no need for remapping). * @note ENABLE: PD0 remapped on OSC_IN, PD1 remapped on OSC_OUT. * @retval None */ #define __HAL_AFIO_REMAP_PD01_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_PD01_REMAP) /** * @brief Disable the remapping of PD0 and PD1. When the HSE oscillator is not used * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available * on 100-pin and 144-pin packages, no need for remapping). * @note DISABLE: No remapping of PD0 and PD1 * @retval None */ #define __HAL_AFIO_REMAP_PD01_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_PD01_REMAP) #if defined(AFIO_MAPR_TIM5CH4_IREMAP) /** * @brief Enable the remapping of TIM5CH4. * @note ENABLE: LSI internal clock is connected to TIM5_CH4 input for calibration purpose. * @note This function is available only in high density value line devices. * @retval None */ #define __HAL_AFIO_REMAP_TIM5CH4_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM5CH4_IREMAP) /** * @brief Disable the remapping of TIM5CH4. * @note DISABLE: TIM5_CH4 is connected to PA3 * @note This function is available only in high density value line devices. * @retval None */ #define __HAL_AFIO_REMAP_TIM5CH4_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM5CH4_IREMAP) #endif #if defined(AFIO_MAPR_ETH_REMAP) /** * @brief Enable the remapping of Ethernet MAC connections with the PHY. * @note ENABLE: Remap (RX_DV-CRS_DV/PD8, RXD0/PD9, RXD1/PD10, RXD2/PD11, RXD3/PD12) * @note This bit is available only in connectivity line devices and is reserved otherwise. * @retval None */ #define __HAL_AFIO_REMAP_ETH_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ETH_REMAP) /** * @brief Disable the remapping of Ethernet MAC connections with the PHY. * @note DISABLE: No remap (RX_DV-CRS_DV/PA7, RXD0/PC4, RXD1/PC5, RXD2/PB0, RXD3/PB1) * @note This bit is available only in connectivity line devices and is reserved otherwise. * @retval None */ #define __HAL_AFIO_REMAP_ETH_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ETH_REMAP) #endif #if defined(AFIO_MAPR_CAN2_REMAP) /** * @brief Enable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX. * @note ENABLE: Remap (CAN2_RX/PB5, CAN2_TX/PB6) * @note This bit is available only in connectivity line devices and is reserved otherwise. * @retval None */ #define __HAL_AFIO_REMAP_CAN2_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN2_REMAP) /** * @brief Disable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX. * @note DISABLE: No remap (CAN2_RX/PB12, CAN2_TX/PB13) * @note This bit is available only in connectivity line devices and is reserved otherwise. * @retval None */ #define __HAL_AFIO_REMAP_CAN2_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_CAN2_REMAP) #endif #if defined(AFIO_MAPR_MII_RMII_SEL) /** * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY. * @note ETH_RMII: Configure Ethernet MAC for connection with an RMII PHY * @note This bit is available only in connectivity line devices and is reserved otherwise. * @retval None */ #define __HAL_AFIO_ETH_RMII() SET_BIT(AFIO->MAPR, AFIO_MAPR_MII_RMII_SEL) /** * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY. * @note ETH_MII: Configure Ethernet MAC for connection with an MII PHY * @note This bit is available only in connectivity line devices and is reserved otherwise. * @retval None */ #define __HAL_AFIO_ETH_MII() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_MII_RMII_SEL) #endif /** * @brief Enable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). * @note ENABLE: ADC1 External Event injected conversion is connected to TIM8 Channel4. * @retval None */ #define __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGINJ_REMAP) /** * @brief Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). * @note DISABLE: ADC1 External trigger injected conversion is connected to EXTI15 * @retval None */ #define __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGINJ_REMAP) /** * @brief Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). * @note ENABLE: ADC1 External Event regular conversion is connected to TIM8 TRG0. * @retval None */ #define __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGREG_REMAP) /** * @brief Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). * @note DISABLE: ADC1 External trigger regular conversion is connected to EXTI11 * @retval None */ #define __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGREG_REMAP) #if defined(AFIO_MAPR_ADC2_ETRGINJ_REMAP) /** * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion). * @note ENABLE: ADC2 External Event injected conversion is connected to TIM8 Channel4. * @retval None */ #define __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGINJ_REMAP) /** * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion). * @note DISABLE: ADC2 External trigger injected conversion is connected to EXTI15 * @retval None */ #define __HAL_AFIO_REMAP_ADC2_ETRGINJ_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGINJ_REMAP) #endif #if defined (AFIO_MAPR_ADC2_ETRGREG_REMAP) /** * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). * @note ENABLE: ADC2 External Event regular conversion is connected to TIM8 TRG0. * @retval None */ #define __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGREG_REMAP) /** * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). * @note DISABLE: ADC2 External trigger regular conversion is connected to EXTI11 * @retval None */ #define __HAL_AFIO_REMAP_ADC2_ETRGREG_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGREG_REMAP) #endif /** * @brief Enable the Serial wire JTAG configuration * @note ENABLE: Full SWJ (JTAG-DP + SW-DP): Reset State * @retval None */ #define __HAL_AFIO_REMAP_SWJ_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_RESET) /** * @brief Enable the Serial wire JTAG configuration * @note NONJTRST: Full SWJ (JTAG-DP + SW-DP) but without NJTRST * @retval None */ #define __HAL_AFIO_REMAP_SWJ_NONJTRST() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_NOJNTRST) /** * @brief Enable the Serial wire JTAG configuration * @note NOJTAG: JTAG-DP Disabled and SW-DP Enabled * @retval None */ #define __HAL_AFIO_REMAP_SWJ_NOJTAG() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_JTAGDISABLE) /** * @brief Disable the Serial wire JTAG configuration * @note DISABLE: JTAG-DP Disabled and SW-DP Disabled * @retval None */ #define __HAL_AFIO_REMAP_SWJ_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_DISABLE) #if defined(AFIO_MAPR_SPI3_REMAP) /** * @brief Enable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD. * @note ENABLE: Remap (SPI3_NSS-I2S3_WS/PA4, SPI3_SCK-I2S3_CK/PC10, SPI3_MISO/PC11, SPI3_MOSI-I2S3_SD/PC12) * @note This bit is available only in connectivity line devices and is reserved otherwise. * @retval None */ #define __HAL_AFIO_REMAP_SPI3_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_SPI3_REMAP) /** * @brief Disable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD. * @note DISABLE: No remap (SPI3_NSS-I2S3_WS/PA15, SPI3_SCK-I2S3_CK/PB3, SPI3_MISO/PB4, SPI3_MOSI-I2S3_SD/PB5). * @note This bit is available only in connectivity line devices and is reserved otherwise. * @retval None */ #define __HAL_AFIO_REMAP_SPI3_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SPI3_REMAP) #endif #if defined(AFIO_MAPR_TIM2ITR1_IREMAP) /** * @brief Control of TIM2_ITR1 internal mapping. * @note TO_USB: Connect USB OTG SOF (Start of Frame) output to TIM2_ITR1 for calibration purposes. * @note This bit is available only in connectivity line devices and is reserved otherwise. * @retval None */ #define __HAL_AFIO_TIM2ITR1_TO_USB() SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2ITR1_IREMAP) /** * @brief Control of TIM2_ITR1 internal mapping. * @note TO_ETH: Connect TIM2_ITR1 internally to the Ethernet PTP output for calibration purposes. * @note This bit is available only in connectivity line devices and is reserved otherwise. * @retval None */ #define __HAL_AFIO_TIM2ITR1_TO_ETH() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM2ITR1_IREMAP) #endif #if defined(AFIO_MAPR_PTP_PPS_REMAP) /** * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). * @note ENABLE: PTP_PPS is output on PB5 pin. * @note This bit is available only in connectivity line devices and is reserved otherwise. * @retval None */ #define __HAL_AFIO_ETH_PTP_PPS_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_PTP_PPS_REMAP) /** * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). * @note DISABLE: PTP_PPS not output on PB5 pin. * @note This bit is available only in connectivity line devices and is reserved otherwise. * @retval None */ #define __HAL_AFIO_ETH_PTP_PPS_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_PTP_PPS_REMAP) #endif #if defined(AFIO_MAPR2_TIM9_REMAP) /** * @brief Enable the remapping of TIM9_CH1 and TIM9_CH2. * @note ENABLE: Remap (TIM9_CH1 on PE5 and TIM9_CH2 on PE6). * @retval None */ #define __HAL_AFIO_REMAP_TIM9_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP) /** * @brief Disable the remapping of TIM9_CH1 and TIM9_CH2. * @note DISABLE: No remap (TIM9_CH1 on PA2 and TIM9_CH2 on PA3). * @retval None */ #define __HAL_AFIO_REMAP_TIM9_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP) #endif #if defined(AFIO_MAPR2_TIM10_REMAP) /** * @brief Enable the remapping of TIM10_CH1. * @note ENABLE: Remap (TIM10_CH1 on PF6). * @retval None */ #define __HAL_AFIO_REMAP_TIM10_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP) /** * @brief Disable the remapping of TIM10_CH1. * @note DISABLE: No remap (TIM10_CH1 on PB8). * @retval None */ #define __HAL_AFIO_REMAP_TIM10_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP) #endif #if defined(AFIO_MAPR2_TIM11_REMAP) /** * @brief Enable the remapping of TIM11_CH1. * @note ENABLE: Remap (TIM11_CH1 on PF7). * @retval None */ #define __HAL_AFIO_REMAP_TIM11_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP) /** * @brief Disable the remapping of TIM11_CH1. * @note DISABLE: No remap (TIM11_CH1 on PB9). * @retval None */ #define __HAL_AFIO_REMAP_TIM11_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP) #endif #if defined(AFIO_MAPR2_TIM13_REMAP) /** * @brief Enable the remapping of TIM13_CH1. * @note ENABLE: Remap STM32F100:(TIM13_CH1 on PF8). Others:(TIM13_CH1 on PB0). * @retval None */ #define __HAL_AFIO_REMAP_TIM13_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP) /** * @brief Disable the remapping of TIM13_CH1. * @note DISABLE: No remap STM32F100:(TIM13_CH1 on PA6). Others:(TIM13_CH1 on PC8). * @retval None */ #define __HAL_AFIO_REMAP_TIM13_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP) #endif #if defined(AFIO_MAPR2_TIM14_REMAP) /** * @brief Enable the remapping of TIM14_CH1. * @note ENABLE: Remap STM32F100:(TIM14_CH1 on PB1). Others:(TIM14_CH1 on PF9). * @retval None */ #define __HAL_AFIO_REMAP_TIM14_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP) /** * @brief Disable the remapping of TIM14_CH1. * @note DISABLE: No remap STM32F100:(TIM14_CH1 on PC9). Others:(TIM14_CH1 on PA7). * @retval None */ #define __HAL_AFIO_REMAP_TIM14_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP) #endif #if defined(AFIO_MAPR2_FSMC_NADV_REMAP) /** * @brief Controls the use of the optional FSMC_NADV signal. * @note DISCONNECTED: The NADV signal is not connected. The I/O pin can be used by another peripheral. * @retval None */ #define __HAL_AFIO_FSMCNADV_DISCONNECTED() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP) /** * @brief Controls the use of the optional FSMC_NADV signal. * @note CONNECTED: The NADV signal is connected to the output (default). * @retval None */ #define __HAL_AFIO_FSMCNADV_CONNECTED() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP) #endif #if defined(AFIO_MAPR2_TIM15_REMAP) /** * @brief Enable the remapping of TIM15_CH1 and TIM15_CH2. * @note ENABLE: Remap (TIM15_CH1 on PB14 and TIM15_CH2 on PB15). * @retval None */ #define __HAL_AFIO_REMAP_TIM15_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP) /** * @brief Disable the remapping of TIM15_CH1 and TIM15_CH2. * @note DISABLE: No remap (TIM15_CH1 on PA2 and TIM15_CH2 on PA3). * @retval None */ #define __HAL_AFIO_REMAP_TIM15_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP) #endif #if defined(AFIO_MAPR2_TIM16_REMAP) /** * @brief Enable the remapping of TIM16_CH1. * @note ENABLE: Remap (TIM16_CH1 on PA6). * @retval None */ #define __HAL_AFIO_REMAP_TIM16_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP) /** * @brief Disable the remapping of TIM16_CH1. * @note DISABLE: No remap (TIM16_CH1 on PB8). * @retval None */ #define __HAL_AFIO_REMAP_TIM16_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP) #endif #if defined(AFIO_MAPR2_TIM17_REMAP) /** * @brief Enable the remapping of TIM17_CH1. * @note ENABLE: Remap (TIM17_CH1 on PA7). * @retval None */ #define __HAL_AFIO_REMAP_TIM17_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP) /** * @brief Disable the remapping of TIM17_CH1. * @note DISABLE: No remap (TIM17_CH1 on PB9). * @retval None */ #define __HAL_AFIO_REMAP_TIM17_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP) #endif #if defined(AFIO_MAPR2_CEC_REMAP) /** * @brief Enable the remapping of CEC. * @note ENABLE: Remap (CEC on PB10). * @retval None */ #define __HAL_AFIO_REMAP_CEC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP) /** * @brief Disable the remapping of CEC. * @note DISABLE: No remap (CEC on PB8). * @retval None */ #define __HAL_AFIO_REMAP_CEC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP) #endif #if defined(AFIO_MAPR2_TIM1_DMA_REMAP) /** * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels. * @note ENABLE: Remap (TIM1_CH1 DMA request/DMA1 Channel6, TIM1_CH2 DMA request/DMA1 Channel6) * @retval None */ #define __HAL_AFIO_REMAP_TIM1DMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP) /** * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels. * @note DISABLE: No remap (TIM1_CH1 DMA request/DMA1 Channel2, TIM1_CH2 DMA request/DMA1 Channel3). * @retval None */ #define __HAL_AFIO_REMAP_TIM1DMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP) #endif #if defined(AFIO_MAPR2_TIM67_DAC_DMA_REMAP) /** * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels. * @note ENABLE: Remap (TIM6_DAC1 DMA request/DMA1 Channel3, TIM7_DAC2 DMA request/DMA1 Channel4) * @retval None */ #define __HAL_AFIO_REMAP_TIM67DACDMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP) /** * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels. * @note DISABLE: No remap (TIM6_DAC1 DMA request/DMA2 Channel3, TIM7_DAC2 DMA request/DMA2 Channel4) * @retval None */ #define __HAL_AFIO_REMAP_TIM67DACDMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP) #endif #if defined(AFIO_MAPR2_TIM12_REMAP) /** * @brief Enable the remapping of TIM12_CH1 and TIM12_CH2. * @note ENABLE: Remap (TIM12_CH1 on PB12 and TIM12_CH2 on PB13). * @note This bit is available only in high density value line devices. * @retval None */ #define __HAL_AFIO_REMAP_TIM12_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP) /** * @brief Disable the remapping of TIM12_CH1 and TIM12_CH2. * @note DISABLE: No remap (TIM12_CH1 on PC4 and TIM12_CH2 on PC5). * @note This bit is available only in high density value line devices. * @retval None */ #define __HAL_AFIO_REMAP_TIM12_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP) #endif #if defined(AFIO_MAPR2_MISC_REMAP) /** * @brief Miscellaneous features remapping. * This bit is set and cleared by software. It controls miscellaneous features. * The DMA2 channel 5 interrupt position in the vector table. * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register). * @note ENABLE: DMA2 channel 5 interrupt is mapped separately at position 60 and TIM15 TRGO event is * selected as DAC Trigger 3, TIM15 triggers TIM1/3. * @note This bit is available only in high density value line devices. * @retval None */ #define __HAL_AFIO_REMAP_MISC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP) /** * @brief Miscellaneous features remapping. * This bit is set and cleared by software. It controls miscellaneous features. * The DMA2 channel 5 interrupt position in the vector table. * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register). * @note DISABLE: DMA2 channel 5 interrupt is mapped with DMA2 channel 4 at position 59, TIM5 TRGO * event is selected as DAC Trigger 3, TIM5 triggers TIM1/3. * @note This bit is available only in high density value line devices. * @retval None */ #define __HAL_AFIO_REMAP_MISC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP) #endif /** * @} */ /** * @} */ /** @defgroup GPIOEx_Private_Macros GPIOEx Private Macros * @{ */ #if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) #define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ ((__GPIOx__) == (GPIOB))? 1U :\ ((__GPIOx__) == (GPIOC))? 2U :3U) #elif defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F103xB) || defined(STM32F105xC) || defined(STM32F107xC) #define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ ((__GPIOx__) == (GPIOB))? 1U :\ ((__GPIOx__) == (GPIOC))? 2U :\ ((__GPIOx__) == (GPIOD))? 3U :4U) #elif defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) #define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ ((__GPIOx__) == (GPIOB))? 1U :\ ((__GPIOx__) == (GPIOC))? 2U :\ ((__GPIOx__) == (GPIOD))? 3U :\ ((__GPIOx__) == (GPIOE))? 4U :\ ((__GPIOx__) == (GPIOF))? 5U :6U) #endif /** * @} */ /* Exported macro ------------------------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ /** @addtogroup GPIOEx_Exported_Functions * @{ */ /** @addtogroup GPIOEx_Exported_Functions_Group1 * @{ */ /*- injected dox -*/ /** * @brief Configures the port and pin on which the EVENTOUT Cortex signal will be connected. * @param GPIO_PortSource Select the port used to output the Cortex EVENTOUT signal. * This parameter can be a value of @ref GPIOEx_EVENTOUT_PORT. * @param GPIO_PinSource Select the pin used to output the Cortex EVENTOUT signal. * This parameter can be a value of @ref GPIOEx_EVENTOUT_PIN. * @retval None */ void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource); /*- injected dox -*/ /** * @brief Enables the Event Output. * @retval None */ void HAL_GPIOEx_EnableEventout(void); /*- injected dox -*/ /** * @brief Disables the Event Output. * @retval None */ void HAL_GPIOEx_DisableEventout(void); /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F1xx_HAL_GPIO_EX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/