25개 이상의 토픽을 선택하실 수 없습니다.
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Ondřej Hruška
b49668e3e8
|
6 년 전 | |
---|---|---|
.settings | 6 년 전 | |
Docs | 6 년 전 | |
Drivers | 6 년 전 | |
Inc | 6 년 전 | |
Middlewares/Third_Party/Lora | 7 년 전 | |
Src | 6 년 전 | |
startup | 7 년 전 | |
.cproject | 6 년 전 | |
.gitignore | 7 년 전 | |
.mxproject | 7 년 전 | |
.project | 6 년 전 | |
Bees3 Debug.cfg | 7 년 전 | |
CMakeLists.txt | 7 년 전 | |
Makefile | 7 년 전 | |
NUCLEO-L073RZ.xml | 7 년 전 | |
README.md | 6 년 전 | |
STM32L073RZTx_FLASH.ld | 7 년 전 | |
lora_bees_final Run.cfg | 6 년 전 | |
mx.scratch | 7 년 전 | |
proj Debug.cfg | 7 년 전 | |
proj.ioc | 7 년 전 |
README.md
lorabees
Beehive monitoring project with LoRa / P-NUCLEO-LRWAN1 (STM32L073RZ)
This is an experimental student project focused on learning how to use LoRa. It captures some environmental properites, samples audio and computes its frequency spectrum. Then the principal peaks of the spectrum are detected and reported together with the other information to a LoRa gateway. Those packets can be captured using a Node-RED MQTT flow to a file.
-> See the Docs/ folder for a demo video and a PDF about the project
Sensors
- BME680 (Temperature, Relative Humidity, Atmospheric Pressure, Volatile Organic Compounds)
- Microphone for buzzing capture & analysis (electret mic with a transistor-based amplifier)
Progress
- LoRa integration
- BME680 communication, basic reading
- MBE680 periodic reporting to LoRa
- Try to use BSEC for better sensor compensation
- Design and build the microphone amplifier
- Microphone capture via DMA and ADC
- Waveform analysis (Fourier transform, peak detection, noise level..)
- Waveform principal characteristics reporting to LoRa
- Data analysis backend (Mosquitto on RPi receiving packets from The Things Network, storing to DB, some graphs)