B3M38SPD seminar project - beehive monitor with LoRa reporting
您最多能選擇 25 個主題 主題必須以字母或數字為開頭,可包含連接號「-」且最長為 35 個字元。
 
 
 
 
spd-lorabees/proj Debug.cfg

28 行
778 B

# This is an NUCLEO-L073RZ board with a single STM32L073RZTx chip
#
# Generated by System Workbench for STM32
# Take care that such file, as generated, may be overridden without any early notice. Please have a look to debug launch configuration setup(s)
source [find interface/stlink.cfg]
set WORKAREASIZE 0x5000
transport select "hla_swd"
set CHIPNAME STM32L073RZTx
# Enable debug when in low power modes
set ENABLE_LOW_POWER 1
# Stop Watchdog counters when halt
set STOP_WATCHDOG 1
# STlink Debug clock frequency
set CLOCK_FREQ 4000
# use hardware reset, connect under reset
# connect_assert_srst needed if low power mode application running (WFI...)
reset_config srst_only srst_nogate connect_assert_srst
set CONNECT_UNDER_RESET 1
source [find target/stm32l0x.cfg]