electro
/
spd-lorabees
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
B3M38SPD seminar project - beehive monitor with LoRa reporting
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
8 Commits
1 Branch
0 Tags
15 MiB
 
 
 
 
Tag: Branch: Tree: e22af2bccd
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'e22af2bccd'
${ noResults }
spd-lorabees/Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pcd.h

808 lines
30 KiB
Raw Blame History

/**
******************************************************************************
* @file stm32l0xx_hal_pcd.h
* @author MCD Application Team
* @brief Header file of PCD HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L0xx_HAL_PCD_H
#define __STM32L0xx_HAL_PCD_H
#ifdef __cplusplus
extern "C" {
#endif
#if !defined (STM32L011xx) && !defined (STM32L021xx) && !defined (STM32L031xx) && !defined (STM32L041xx) && !defined (STM32L051xx) && !defined (STM32L061xx) && !defined (STM32L071xx) && !defined (STM32L081xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32l0xx_hal_def.h"
/** @addtogroup STM32L0xx_HAL_Driver
* @{
*/
/** @defgroup PCD PCD
* @{
*/
/** @defgroup PCD_Exported_Types PCD Exported Types
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief PCD State structures definition
*/
typedef enum
{
HAL_PCD_STATE_RESET = 0x00U,
HAL_PCD_STATE_READY = 0x01U,
HAL_PCD_STATE_ERROR = 0x02U,
HAL_PCD_STATE_BUSY = 0x03U,
HAL_PCD_STATE_TIMEOUT = 0x04U
} PCD_StateTypeDef;
/* Device LPM suspend state */
typedef enum
{
LPM_L0 = 0x00, /* on */
LPM_L1 = 0x01, /* LPM L1 sleep */
LPM_L2 = 0x02, /* suspend */
LPM_L3 = 0x03, /* off */
}PCD_LPM_StateTypeDef;
typedef enum
{
/* double buffered endpoint direction */
PCD_EP_DBUF_OUT,
PCD_EP_DBUF_IN,
PCD_EP_DBUF_ERR,
}PCD_EP_DBUF_DIR;
/* endpoint buffer number */
typedef enum
{
PCD_EP_NOBUF,
PCD_EP_BUF0,
PCD_EP_BUF1
}PCD_EP_BUF_NUM;
/**
* @brief PCD Initialization Structure definition
*/
typedef struct
{
uint32_t dev_endpoints; /*!< Device Endpoints number.
This parameter depends on the used USB core.
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint32_t speed; /*!< USB Core speed.
This parameter can be any value of @ref PCD_Speed */
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
This parameter can be any value of @ref PCD_USB_EP0_MPS */
uint32_t phy_itface; /*!< Select the used PHY interface.
This parameter can be any value of @ref PCD_USB_Core_PHY */
uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal.
This parameter can be set to ENABLE or DISABLE */
uint32_t low_power_enable; /*!< Enable or disable Low Power mode
This parameter can be set to ENABLE or DISABLE */
uint32_t lpm_enable; /*!< Enable or disable Link Power Management.
This parameter can be set to ENABLE or DISABLE */
uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.
This parameter can be set to ENABLE or DISABLE */
}PCD_InitTypeDef;
typedef struct
{
uint8_t num; /*!< Endpoint number
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint8_t is_in; /*!< Endpoint direction
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t is_stall; /*!< Endpoint stall condition
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t type; /*!< Endpoint type
This parameter can be any value of @ref PCD_USB_EP_Type */
uint16_t pmaadress; /*!< PMA Address
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
uint16_t pmaaddr0; /*!< PMA Address0
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
uint16_t pmaaddr1; /*!< PMA Address1
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
uint8_t doublebuffer; /*!< Double buffer enable
This parameter can be 0 or 1 */
uint32_t maxpacket; /*!< Endpoint Max packet size
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
uint32_t xfer_len; /*!< Current transfer length */
uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
}PCD_EPTypeDef;
typedef USB_TypeDef PCD_TypeDef;
/**
* @brief PCD Handle Structure definition
*/
typedef struct
{
PCD_TypeDef *Instance; /*!< Register base address */
PCD_InitTypeDef Init; /*!< PCD required parameters */
__IO uint8_t USB_Address; /*!< USB Address */
PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */
PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */
HAL_LockTypeDef Lock; /*!< PCD peripheral status */
__IO PCD_StateTypeDef State; /*!< PCD communication state */
uint32_t Setup[12]; /*!< Setup packet buffer */
PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */
uint32_t BESL;
uint32_t lpm_active; /*!< Enable or disable the Link Power Management .
This parameter can be set to ENABLE or DISABLE */
uint32_t battery_charging_active; /*!< Enable or disable Battery charging.
This parameter can be set to ENABLE or DISABLE */
void *pData; /*!< Pointer to upper stack Handler */
} PCD_HandleTypeDef;
/**
* @}
*/
#include "stm32l0xx_hal_pcd_ex.h"
/* Exported constants --------------------------------------------------------*/
/** @defgroup PCD_Exported_Constants PCD Exported Constants
* @{
*/
/** @defgroup PCD_EndPoint PCD End Point
* @{
*/
#define PCD_ENDP0 ((uint8_t)0U)
#define PCD_ENDP1 ((uint8_t)1U)
#define PCD_ENDP2 ((uint8_t)2U)
#define PCD_ENDP3 ((uint8_t)3U)
#define PCD_ENDP4 ((uint8_t)4U)
#define PCD_ENDP5 ((uint8_t)5U)
#define PCD_ENDP6 ((uint8_t)6U)
#define PCD_ENDP7 ((uint8_t)7U)
/* Endpoint Kind */
#define PCD_SNG_BUF 0U
#define PCD_DBL_BUF 1U
#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
/**
* @}
*/
/** @defgroup PCD_Speed PCD Speed
* @{
*/
#define PCD_SPEED_HIGH 0U /* Not Supported */
#define PCD_SPEED_FULL 2U
/**
* @}
*/
/** @defgroup PCD_USB_Core_PHY PCD USB Core PHY
* @{
*/
#define PCD_PHY_EMBEDDED 2U
/**
* @}
*/
/** @defgroup PCD_USB_EP0_MPS PCD USB EP0 MPS
* @{
*/
#define DEP0CTL_MPS_64 0U
#define DEP0CTL_MPS_32 1U
#define DEP0CTL_MPS_16 2U
#define DEP0CTL_MPS_8 3U
#define PCD_EP0MPS_64 DEP0CTL_MPS_64
#define PCD_EP0MPS_32 DEP0CTL_MPS_32
#define PCD_EP0MPS_16 DEP0CTL_MPS_16
#define PCD_EP0MPS_08 DEP0CTL_MPS_8
/**
* @}
*/
/** @defgroup PCD_USB_EP_Type PCD USB EP Type
* @{
*/
#define PCD_EP_TYPE_CTRL 0U
#define PCD_EP_TYPE_ISOC 1U
#define PCD_EP_TYPE_BULK 2U
#define PCD_EP_TYPE_INTR 3U
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup PCD_Interrupt_Clock PCD Interrupt
* @brief macros to handle interrupts and specific clock configurations
* @{
*/
#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= (uint16_t) ~(__INTERRUPT__))
#define USB_WAKEUP_EXTI_LINE (EXTI_IMR_IM18) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_WAKEUP_EXTI_LINE
#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE)
#define __HAL_USB_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_WAKEUP_EXTI_LINE)
/* Internal macros -----------------------------------------------------------*/
/* SetENDPOINT */
#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*(&USBx->EP0R + bEpNum * 2U)= (uint16_t)wRegValue)
/* GetENDPOINT */
#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(&USBx->EP0R + bEpNum * 2U))
/**
* @brief sets the type in the endpoint register(bits EP_TYPE[1:0])
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @param wType: Endpoint Type.
* @retval None
*/
#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT(USBx, bEpNum,\
((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_T_MASK) | wType )))
/**
* @brief gets the type in the endpoint register(bits EP_TYPE[1:0])
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval Endpoint Type
*/
#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_T_FIELD)
/**
* @brief free buffer used from the application realizing it to the line
* toggles bit SW_BUF in the double buffered endpoint register
* @param USBx: USB device.
* @param bEpNum, bDir
* @retval None
*/
#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\
do {\
if (bDir == PCD_EP_DBUF_OUT)\
{ /* OUT double buffered endpoint */\
PCD_TX_DTOG(USBx, bEpNum);\
}\
else if (bDir == PCD_EP_DBUF_IN)\
{ /* IN double buffered endpoint */\
PCD_RX_DTOG(USBx, bEpNum);\
}\
} while(0)
/**
* @brief gets direction of the double buffered endpoint
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval EP_DBUF_OUT, EP_DBUF_IN,
* EP_DBUF_ERR if the endpoint counter not yet programmed.
*/
#define PCD_GET_DB_DIR(USBx, bEpNum)\
do {\
if ((uint16_t)(*PCD_EP_RX_CNT(USBx, bEpNum) & 0xFC00U) != 0U)\
return(PCD_EP_DBUF_OUT);\
else if (((uint16_t)(*PCD_EP_TX_CNT(USBx, bEpNum)) & 0x03FFU) != 0U)\
return(PCD_EP_DBUF_IN);\
else\
return(PCD_EP_DBUF_ERR);\
} while(0)
/**
* @brief sets the status for tx transfer (bits STAT_TX[1:0]).
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @param wState: new state
* @retval None
*/
#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) do {\
register uint16_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPTX_DTOGMASK;\
/* toggle first bit ? */ \
if((USB_EPTX_DTOG1 & wState)!= 0U) \
_wRegVal ^= USB_EPTX_DTOG1; \
/* toggle second bit ? */ \
if((USB_EPTX_DTOG2 & wState)!= 0U) \
_wRegVal ^= USB_EPTX_DTOG2; \
PCD_SET_ENDPOINT(USBx, bEpNum, (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
} while(0) /* PCD_SET_EP_TX_STATUS */
/**
* @brief sets the status for rx transfer (bits STAT_TX[1:0])
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @param wState: new state
* @retval None
*/
#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) do {\
register uint16_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPRX_DTOGMASK;\
/* toggle first bit ? */ \
if((USB_EPRX_DTOG1 & wState)!= 0U) \
_wRegVal ^= USB_EPRX_DTOG1; \
/* toggle second bit ? */ \
if((USB_EPRX_DTOG2 & wState)!= 0U) \
_wRegVal ^= USB_EPRX_DTOG2; \
PCD_SET_ENDPOINT(USBx, bEpNum, (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
} while(0) /* PCD_SET_EP_RX_STATUS */
/**
* @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @param wStaterx: new state.
* @param wStatetx: new state.
* @retval None
*/
#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) do {\
register uint32_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\
/* toggle first bit ? */ \
if((USB_EPRX_DTOG1 & wStaterx)!= 0U) \
_wRegVal ^= USB_EPRX_DTOG1; \
/* toggle second bit ? */ \
if((USB_EPRX_DTOG2 & wStaterx)!= 0U) \
_wRegVal ^= USB_EPRX_DTOG2; \
/* toggle first bit ? */ \
if((USB_EPTX_DTOG1 & wStatetx)!= 0U) \
_wRegVal ^= USB_EPTX_DTOG1; \
/* toggle second bit ? */ \
if((USB_EPTX_DTOG2 & wStatetx)!= 0U) \
_wRegVal ^= USB_EPTX_DTOG2; \
PCD_SET_ENDPOINT(USBx, bEpNum, _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \
} while(0) /* PCD_SET_EP_TXRX_STATUS */
/**
* @brief gets the status for tx/rx transfer (bits STAT_TX[1:0]
* /STAT_RX[1:0])
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval status
*/
#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPTX_STAT)
#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPRX_STAT)
/**
* @brief sets directly the VALID tx/rx-status into the endpoint register
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS(USBx, bEpNum, USB_EP_TX_VALID))
#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS(USBx, bEpNum, USB_EP_RX_VALID))
/**
* @brief checks stall condition in an endpoint.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval TRUE = endpoint in stall condition.
*/
#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS(USBx, bEpNum) \
== USB_EP_TX_STALL)
#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS(USBx, bEpNum) \
== USB_EP_RX_STALL)
/**
* @brief set & clear EP_KIND bit.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
(USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT(USBx, bEpNum) | USB_EP_KIND) & USB_EPREG_MASK))))
#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
(USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPKIND_MASK))))
/**
* @brief Sets/clears directly STATUS_OUT bit in the endpoint register.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND(USBx, bEpNum)
#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND(USBx, bEpNum)
/**
* @brief Sets/clears directly EP_KIND bit in the endpoint register.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND(USBx, bEpNum)
#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND(USBx, bEpNum)
/**
* @brief Clears bit CTR_RX / CTR_TX in the endpoint register.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum,\
PCD_GET_ENDPOINT(USBx, bEpNum) & 0x7FFFU & USB_EPREG_MASK))
#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum,\
PCD_GET_ENDPOINT(USBx, bEpNum) & 0xFF7FU & USB_EPREG_MASK))
/**
* @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK)))
#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK)))
/**
* @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_DTOG_RX) != 0)\
PCD_RX_DTOG(USBx, bEpNum)
#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_DTOG_TX) != 0)\
PCD_TX_DTOG(USBx, bEpNum)
/**
* @brief Sets address in an endpoint register.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @param bAddr: Address.
* @retval None
*/
#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT(USBx, bEpNum,\
USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK) | bAddr)
/**
* @brief Gets address in an endpoint register.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPADDR_FIELD))
#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8U)+ ((uint32_t)USBx + 0x400U)))
#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8U+2U)+ ((uint32_t)USBx + 0x400U)))
#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8U+4U)+ ((uint32_t)USBx + 0x400U)))
#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8U+6U)+ ((uint32_t)USBx + 0x400U)))
/**
* @brief sets address of the tx/rx buffer.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @param wAddr: address to be set (must be word aligned).
* @retval None
*/
#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS(USBx, bEpNum) = ((wAddr >> 1U) << 1U))
#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS(USBx, bEpNum) = ((wAddr >> 1U) << 1U))
/**
* @brief Gets address of the tx/rx buffer.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval address of the buffer.
*/
#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS(USBx, bEpNum))
#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS(USBx, bEpNum))
/**
* @brief Sets counter of rx buffer with no. of blocks.
* @param dwReg: Register.
* @param wCount: Counter.
* @param wNBlocks: Nb of block
* @retval None
*/
#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) do {\
wNBlocks = wCount >> 5;\
if((wCount & 0x1f) == 0)\
wNBlocks--;\
*pdwReg = (uint16_t)((wNBlocks << 10U) | 0x8000U);\
} while(0) /* PCD_CALC_BLK32 */
#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) do {\
wNBlocks = wCount >> 1;\
if((wCount & 0x1) != 0)\
wNBlocks++;\
*pdwReg = (uint16_t)(wNBlocks << 10U);\
} while(0) /* PCD_CALC_BLK2 */
#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount) do {\
uint16_t wNBlocks;\
if(wCount > 62){PCD_CALC_BLK32(dwReg,wCount,wNBlocks);}\
else {PCD_CALC_BLK2(dwReg,wCount,wNBlocks);}\
} while(0) /* PCD_SET_EP_CNT_RX_REG */
#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) do {\
uint16_t *pdwReg = PCD_EP_TX_CNT(USBx, bEpNum); \
PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
} while(0)
/**
* @brief sets counter for the tx/rx buffer.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @param wCount: Counter value.
* @retval None
*/
#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT(USBx, bEpNum) = wCount)
#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) do {\
uint16_t *pdwReg = PCD_EP_RX_CNT(USBx, bEpNum); \
PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
} while(0)
/**
* @brief gets counter of the tx buffer.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval Counter value
*/
#define PCD_GET_EP_TX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_TX_CNT(USBx, bEpNum)) & 0x3ffU)
#define PCD_GET_EP_RX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_RX_CNT(USBx, bEpNum)) & 0x3ffU)
/**
* @brief Sets buffer 0/1 address in a double buffer endpoint.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @param wBuf0Addr: buffer 0 address.
* @retval Counter value
*/
#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wBuf0Addr);}
#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wBuf1Addr);}
/**
* @brief Sets addresses in a double buffer endpoint.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @param wBuf0Addr: buffer 0 address.
* @param wBuf1Addr = buffer 1 address.
* @retval None
*/
#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \
PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr);\
PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr);\
} /* PCD_SET_EP_DBUF_ADDR */
/**
* @brief Gets buffer 0/1 address of a double buffer endpoint.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS(USBx, bEpNum))
#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS(USBx, bEpNum))
/**
* @brief Gets buffer 0/1 address of a double buffer endpoint.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @param bDir: endpoint dir EP_DBUF_OUT = OUT and EP_DBUF_IN = IN
* @param wCount: Counter value
* @retval None
*/
#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) { \
if(bDir == PCD_EP_DBUF_OUT)\
/* OUT endpoint */ \
{PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount);} \
else if(bDir == PCD_EP_DBUF_IN)\
/* IN endpoint */ \
*PCD_EP_TX_CNT(USBx, bEpNum) = (uint32_t)wCount; \
} /* SetEPDblBuf0Count*/
#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) { \
if(bDir == PCD_EP_DBUF_OUT)\
/* OUT endpoint */ \
{PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount);}\
else if(bDir == PCD_EP_DBUF_IN)\
/* IN endpoint */\
*PCD_EP_RX_CNT(USBx, bEpNum) = (uint32_t)wCount; \
} /* SetEPDblBuf1Count */
#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) do {\
PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount); \
PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount); \
} while(0) /* PCD_SET_EP_DBUF_CNT */
/**
* @brief Gets buffer 0/1 rx/tx counter for double buffering.
* @param USBx: USB device.
* @param bEpNum: Endpoint Number.
* @retval None
*/
#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT(USBx, bEpNum))
#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT(USBx, bEpNum))
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup PCD_Exported_Functions PCD Exported Functions
* @{
*/
/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
* @{
*/
/* Initialization/de-initialization functions **********************************/
HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
/**
* @}
*/
/** @defgroup PCD_Exported_Functions_Group2 IO Data transfers functions
* @brief Data transfers functions
* @{
*/
/* I/O operation functions *****************************************************/
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
/**
* @}
*/
/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions
* @brief management functions
* @{
*/
/* Peripheral Control functions ************************************************/
HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
void PCD_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
void PCD_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
/**
* @}
*/
/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions
* @brief Peripheral State functions
* @{
*/
/* Peripheral State functions **************************************************/
PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
/**
* @}
*/
/**
* @}
*/
/* Define the private group ***********************************/
/**************************************************************/
/** @defgroup PCD_Private PCD Private
* @{
*/
/**
* @}
*/
/**************************************************************/
/**
* @}
*/
/**
* @}
*/
#endif /* #if !defined (STM32L011xx) && !defined (STM32L021xx) && !defined (STM32L031xx) && !defined (STM32L041xx) && !defined (STM32L051xx) && !defined (STM32L061xx) && !defined (STM32L071xx) && !defined (STM32L081xx) */
#ifdef __cplusplus
}
#endif
#endif /* __STM32L0xx_HAL_PCD_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/