You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
285 lines
9.8 KiB
285 lines
9.8 KiB
/**
|
|
******************************************************************************
|
|
* @file system_stm32l0xx.c
|
|
* @author MCD Application Team
|
|
* @brief CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File.
|
|
*
|
|
* This file provides two functions and one global variable to be called from
|
|
* user application:
|
|
* - SystemInit(): This function is called at startup just after reset and
|
|
* before branch to main program. This call is made inside
|
|
* the "startup_stm32l0xx.s" file.
|
|
*
|
|
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
|
* by the user application to setup the SysTick
|
|
* timer or configure other parameters.
|
|
*
|
|
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
|
* be called whenever the core clock is changed
|
|
* during program execution.
|
|
*
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/** @addtogroup CMSIS
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup stm32l0xx_system
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup STM32L0xx_System_Private_Includes
|
|
* @{
|
|
*/
|
|
|
|
#include "stm32l0xx.h"
|
|
|
|
#if !defined (HSE_VALUE)
|
|
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
|
|
#endif /* HSE_VALUE */
|
|
|
|
#if !defined (MSI_VALUE)
|
|
#define MSI_VALUE ((uint32_t)2000000U) /*!< Value of the Internal oscillator in Hz*/
|
|
#endif /* MSI_VALUE */
|
|
|
|
#if !defined (HSI_VALUE)
|
|
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
|
#endif /* HSI_VALUE */
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32L0xx_System_Private_TypesDefinitions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32L0xx_System_Private_Defines
|
|
* @{
|
|
*/
|
|
/************************* Miscellaneous Configuration ************************/
|
|
|
|
/*!< Uncomment the following line if you need to relocate your vector Table in
|
|
Internal SRAM. */
|
|
/* #define VECT_TAB_SRAM */
|
|
#define VECT_TAB_OFFSET 0x00U /*!< Vector Table base offset field.
|
|
This value must be a multiple of 0x200. */
|
|
/******************************************************************************/
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32L0xx_System_Private_Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32L0xx_System_Private_Variables
|
|
* @{
|
|
*/
|
|
/* This variable is updated in three ways:
|
|
1) by calling CMSIS function SystemCoreClockUpdate()
|
|
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
|
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
|
Note: If you use this function to configure the system clock; then there
|
|
is no need to call the 2 first functions listed above, since SystemCoreClock
|
|
variable is updated automatically.
|
|
*/
|
|
uint32_t SystemCoreClock = 2000000U;
|
|
const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
|
|
const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U};
|
|
const uint8_t PLLMulTable[9] = {3U, 4U, 6U, 8U, 12U, 16U, 24U, 32U, 48U};
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32L0xx_System_Private_FunctionPrototypes
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32L0xx_System_Private_Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Setup the microcontroller system.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemInit (void)
|
|
{
|
|
/*!< Set MSION bit */
|
|
RCC->CR |= (uint32_t)0x00000100U;
|
|
|
|
/*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */
|
|
RCC->CFGR &= (uint32_t) 0x88FF400CU;
|
|
|
|
/*!< Reset HSION, HSIDIVEN, HSEON, CSSON and PLLON bits */
|
|
RCC->CR &= (uint32_t)0xFEF6FFF6U;
|
|
|
|
/*!< Reset HSI48ON bit */
|
|
RCC->CRRCR &= (uint32_t)0xFFFFFFFEU;
|
|
|
|
/*!< Reset HSEBYP bit */
|
|
RCC->CR &= (uint32_t)0xFFFBFFFFU;
|
|
|
|
/*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */
|
|
RCC->CFGR &= (uint32_t)0xFF02FFFFU;
|
|
|
|
/*!< Disable all interrupts */
|
|
RCC->CIER = 0x00000000U;
|
|
|
|
/* Configure the Vector Table location add offset address ------------------*/
|
|
#ifdef VECT_TAB_SRAM
|
|
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
|
#else
|
|
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* @brief Update SystemCoreClock according to Clock Register Values
|
|
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
|
* be used by the user application to setup the SysTick timer or configure
|
|
* other parameters.
|
|
*
|
|
* @note Each time the core clock (HCLK) changes, this function must be called
|
|
* to update SystemCoreClock variable value. Otherwise, any configuration
|
|
* based on this variable will be incorrect.
|
|
*
|
|
* @note - The system frequency computed by this function is not the real
|
|
* frequency in the chip. It is calculated based on the predefined
|
|
* constant and the selected clock source:
|
|
*
|
|
* - If SYSCLK source is MSI, SystemCoreClock will contain the MSI
|
|
* value as defined by the MSI range.
|
|
*
|
|
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
|
*
|
|
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
|
*
|
|
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
|
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
|
*
|
|
* (*) HSI_VALUE is a constant defined in stm32l0xx_hal.h file (default value
|
|
* 16 MHz) but the real value may vary depending on the variations
|
|
* in voltage and temperature.
|
|
*
|
|
* (**) HSE_VALUE is a constant defined in stm32l0xx_hal.h file (default value
|
|
* 8 MHz), user has to ensure that HSE_VALUE is same as the real
|
|
* frequency of the crystal used. Otherwise, this function may
|
|
* have wrong result.
|
|
*
|
|
* - The result of this function could be not correct when using fractional
|
|
* value for HSE crystal.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemCoreClockUpdate (void)
|
|
{
|
|
uint32_t tmp = 0U, pllmul = 0U, plldiv = 0U, pllsource = 0U, msirange = 0U;
|
|
|
|
/* Get SYSCLK source -------------------------------------------------------*/
|
|
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
|
|
|
switch (tmp)
|
|
{
|
|
case 0x00U: /* MSI used as system clock */
|
|
msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13U;
|
|
SystemCoreClock = (32768U * (1U << (msirange + 1U)));
|
|
break;
|
|
case 0x04U: /* HSI used as system clock */
|
|
SystemCoreClock = HSI_VALUE;
|
|
break;
|
|
case 0x08U: /* HSE used as system clock */
|
|
SystemCoreClock = HSE_VALUE;
|
|
break;
|
|
case 0x0CU: /* PLL used as system clock */
|
|
/* Get PLL clock source and multiplication factor ----------------------*/
|
|
pllmul = RCC->CFGR & RCC_CFGR_PLLMUL;
|
|
plldiv = RCC->CFGR & RCC_CFGR_PLLDIV;
|
|
pllmul = PLLMulTable[(pllmul >> 18U)];
|
|
plldiv = (plldiv >> 22U) + 1U;
|
|
|
|
pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
|
|
|
|
if (pllsource == 0x00U)
|
|
{
|
|
/* HSI oscillator clock selected as PLL clock entry */
|
|
SystemCoreClock = (((HSI_VALUE) * pllmul) / plldiv);
|
|
}
|
|
else
|
|
{
|
|
/* HSE selected as PLL clock entry */
|
|
SystemCoreClock = (((HSE_VALUE) * pllmul) / plldiv);
|
|
}
|
|
break;
|
|
default: /* MSI used as system clock */
|
|
msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13U;
|
|
SystemCoreClock = (32768U * (1U << (msirange + 1U)));
|
|
break;
|
|
}
|
|
/* Compute HCLK clock frequency --------------------------------------------*/
|
|
/* Get HCLK prescaler */
|
|
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
|
|
/* HCLK clock frequency */
|
|
SystemCoreClock >>= tmp;
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|