B3M38SPD seminar project - beehive monitor with LoRa reporting
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
spd-lorabees/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_firewall.c

305 lines
12 KiB

/**
******************************************************************************
* @file stm32l0xx_hal_firewall.c
* @author MCD Application Team
* @brief FIREWALL HAL module driver.
* This file provides firmware functions to manage the Firewall
* Peripheral initialization and enabling.
*
*
@verbatim
===============================================================================
##### How to use this driver #####
===============================================================================
[..]
The FIREWALL HAL driver can be used as follows:
(#) Declare a FIREWALL_InitTypeDef initialization structure.
(#) Resort to HAL_FIREWALL_Config() API to initialize the Firewall
(#) Enable the FIREWALL in calling HAL_FIREWALL_EnableFirewall() API
(#) To ensure that any code executed outside the protected segment closes the
FIREWALL, the user must set the flag FIREWALL_PRE_ARM_SET in calling
__HAL_FIREWALL_PREARM_ENABLE() macro if called within a protected code segment
or
HAL_FIREWALL_EnablePreArmFlag() API if called outside of protected code segment
after HAL_FIREWALL_Config() call.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
#if !defined (STM32L011xx) && !defined (STM32L021xx) && !defined (STM32L031xx) && !defined (STM32L041xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32l0xx_hal.h"
/** @addtogroup STM32L0xx_HAL_Driver
* @{
*/
#ifdef HAL_FIREWALL_MODULE_ENABLED
/** @addtogroup FIREWALL
* @brief HAL FIREWALL module driver
* @{
*/
/** @addtogroup FIREWALL_Exported_Functions
* @{
*/
/** @addtogroup FIREWALL_Exported_Functions_Group1
* @brief Initialization and Configuration Functions
*
@verbatim
===============================================================================
##### Initialization and Configuration functions #####
===============================================================================
[..]
This subsection provides the functions allowing to initialize the Firewall.
Initialization is done by HAL_FIREWALL_Config():
(+) Enable the Firewall clock thru __HAL_RCC_FIREWALL_CLK_ENABLE() macro.
(+) Set the protected code segment address start and length.
(+) Set the protected non-volatile and/or volatile data segments
address starts and lengths if applicable.
(+) Set the volatile data segment execution and sharing status.
(+) Length must be set to 0 for an unprotected segment.
@endverbatim
* @{
*/
/**
* @brief Initialize the Firewall according to the FIREWALL_InitTypeDef structure parameters.
* @param fw_init: Firewall initialization structure
* @note The API returns HAL_ERROR if the Firewall is already enabled.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_FIREWALL_Config(FIREWALL_InitTypeDef * fw_init)
{
/* Check the Firewall initialization structure allocation */
if(fw_init == NULL)
{
return HAL_ERROR;
}
/* Enable Firewall clock */
__HAL_RCC_FIREWALL_CLK_ENABLE();
/* Make sure that Firewall is not enabled already */
if (__HAL_FIREWALL_IS_ENABLED() != RESET)
{
return HAL_ERROR;
}
/* Check Firewall configuration addresses and lengths when segment is protected */
/* Code segment */
if (fw_init->CodeSegmentLength != 0U)
{
assert_param(IS_FIREWALL_CODE_SEGMENT_ADDRESS(fw_init->CodeSegmentStartAddress));
assert_param(IS_FIREWALL_CODE_SEGMENT_LENGTH(fw_init->CodeSegmentStartAddress, fw_init->CodeSegmentLength));
}
/* Non volatile data segment */
if (fw_init->NonVDataSegmentLength != 0U)
{
assert_param(IS_FIREWALL_NONVOLATILEDATA_SEGMENT_ADDRESS(fw_init->NonVDataSegmentStartAddress));
assert_param(IS_FIREWALL_NONVOLATILEDATA_SEGMENT_LENGTH(fw_init->NonVDataSegmentStartAddress, fw_init->NonVDataSegmentLength));
}
/* Volatile data segment */
if (fw_init->VDataSegmentLength != 0U)
{
assert_param(IS_FIREWALL_VOLATILEDATA_SEGMENT_ADDRESS(fw_init->VDataSegmentStartAddress));
assert_param(IS_FIREWALL_VOLATILEDATA_SEGMENT_LENGTH(fw_init->VDataSegmentStartAddress, fw_init->VDataSegmentLength));
}
/* Check Firewall Configuration Register parameters */
assert_param(IS_FIREWALL_VOLATILEDATA_EXECUTE(fw_init->VolatileDataExecution));
assert_param(IS_FIREWALL_VOLATILEDATA_SHARE(fw_init->VolatileDataShared));
/* Configuration */
/* Protected code segment start address configuration */
WRITE_REG(FIREWALL->CSSA, (FW_CSSA_ADD & fw_init->CodeSegmentStartAddress));
/* Protected code segment length configuration */
WRITE_REG(FIREWALL->CSL, (FW_CSL_LENG & fw_init->CodeSegmentLength));
/* Protected non volatile data segment start address configuration */
WRITE_REG(FIREWALL->NVDSSA, (FW_NVDSSA_ADD & fw_init->NonVDataSegmentStartAddress));
/* Protected non volatile data segment length configuration */
WRITE_REG(FIREWALL->NVDSL, (FW_NVDSL_LENG & fw_init->NonVDataSegmentLength));
/* Protected volatile data segment start address configuration */
WRITE_REG(FIREWALL->VDSSA, (FW_VDSSA_ADD & fw_init->VDataSegmentStartAddress));
/* Protected volatile data segment length configuration */
WRITE_REG(FIREWALL->VDSL, (FW_VDSL_LENG & fw_init->VDataSegmentLength));
/* Set Firewall Configuration Register VDE and VDS bits
(volatile data execution and shared configuration) */
MODIFY_REG(FIREWALL->CR, FW_CR_VDS|FW_CR_VDE, fw_init->VolatileDataExecution|fw_init->VolatileDataShared);
return HAL_OK;
}
/**
* @brief Retrieve the Firewall configuration.
* @param fw_config: Firewall configuration, type is same as initialization structure
* @note This API can't be executed inside a code area protected by the Firewall
* when the Firewall is enabled
* @note If NVDSL register is different from 0, that is, if the non volatile data segment
* is defined, this API can't be executed when the Firewall is enabled.
* @note User should resort to __HAL_FIREWALL_GET_PREARM() macro to retrieve FPA bit status
* @retval None
*/
void HAL_FIREWALL_GetConfig(FIREWALL_InitTypeDef * fw_config)
{
/* Enable Firewall clock, in case no Firewall configuration has been carried
out up to this point */
__HAL_RCC_FIREWALL_CLK_ENABLE();
/* Retrieve code segment protection setting */
fw_config->CodeSegmentStartAddress = (READ_REG(FIREWALL->CSSA) & FW_CSSA_ADD);
fw_config->CodeSegmentLength = (READ_REG(FIREWALL->CSL) & FW_CSL_LENG);
/* Retrieve non volatile data segment protection setting */
fw_config->NonVDataSegmentStartAddress = (READ_REG(FIREWALL->NVDSSA) & FW_NVDSSA_ADD);
fw_config->NonVDataSegmentLength = (READ_REG(FIREWALL->NVDSL) & FW_NVDSL_LENG);
/* Retrieve volatile data segment protection setting */
fw_config->VDataSegmentStartAddress = (READ_REG(FIREWALL->VDSSA) & FW_VDSSA_ADD);
fw_config->VDataSegmentLength = (READ_REG(FIREWALL->VDSL) & FW_VDSL_LENG);
/* Retrieve volatile data execution setting */
fw_config->VolatileDataExecution = (READ_REG(FIREWALL->CR) & FW_CR_VDE);
/* Retrieve volatile data shared setting */
fw_config->VolatileDataShared = (READ_REG(FIREWALL->CR) & FW_CR_VDS);
return;
}
/**
* @brief Enable FIREWALL.
* @note Firewall is enabled in clearing FWDIS bit of SYSCFG CFGR1 register.
* Once enabled, the Firewall cannot be disabled by software. Only a
* system reset can set again FWDIS bit.
* @retval None
*/
void HAL_FIREWALL_EnableFirewall(void)
{
/* Clears FWDIS bit of SYSCFG CFGR1 register */
CLEAR_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_FWDISEN);
}
/**
* @brief Enable FIREWALL pre arm.
* @note When FPA bit is set, any code executed outside the protected segment
* will close the Firewall.
* @note This API provides the same service as __HAL_FIREWALL_PREARM_ENABLE() macro
* but can't be executed inside a code area protected by the Firewall.
* @note When the Firewall is disabled, user can resort to HAL_FIREWALL_EnablePreArmFlag() API any time.
* @note When the Firewall is enabled and NVDSL register is equal to 0 (that is,
* when the non volatile data segment is not defined),
* ** this API can be executed when the Firewall is closed
* ** when the Firewall is opened, user should resort to
* __HAL_FIREWALL_PREARM_ENABLE() macro instead
* @note When the Firewall is enabled and NVDSL register is different from 0
* (that is, when the non volatile data segment is defined)
* ** FW_CR register can be accessed only when the Firewall is opened:
* user should resort to __HAL_FIREWALL_PREARM_ENABLE() macro instead.
* @retval None
*/
void HAL_FIREWALL_EnablePreArmFlag(void)
{
/* Set FPA bit */
SET_BIT(FIREWALL->CR, FW_CR_FPA);
}
/**
* @brief Disable FIREWALL pre arm.
* @note When FPA bit is reset, any code executed outside the protected segment
* when the Firewall is opened will generate a system reset.
* @note This API provides the same service as __HAL_FIREWALL_PREARM_DISABLE() macro
* but can't be executed inside a code area protected by the Firewall.
* @note When the Firewall is disabled, user can resort to HAL_FIREWALL_EnablePreArmFlag() API any time.
* @note When the Firewall is enabled and NVDSL register is equal to 0 (that is,
* when the non volatile data segment is not defined),
* ** this API can be executed when the Firewall is closed
* ** when the Firewall is opened, user should resort to
* __HAL_FIREWALL_PREARM_DISABLE() macro instead
* @note When the Firewall is enabled and NVDSL register is different from 0
* (that is, when the non volatile data segment is defined)
* ** FW_CR register can be accessed only when the Firewall is opened:
* user should resort to __HAL_FIREWALL_PREARM_DISABLE() macro instead.
* @retval None
*/
void HAL_FIREWALL_DisablePreArmFlag(void)
{
/* Clear FPA bit */
CLEAR_BIT(FIREWALL->CR, FW_CR_FPA);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_FIREWALL_MODULE_ENABLED */
/**
* @}
*/
#endif /* #if !defined (STM32L011xx) && !defined (STM32L021xx) && !defined (STM32L031xx) && !defined (STM32L041xx) */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/