/* / _____) _ | | ( (____ _____ ____ _| |_ _____ ____| |__ \____ \| ___ | (_ _) ___ |/ ___) _ \ _____) ) ____| | | || |_| ____( (___| | | | (______/|_____)_|_|_| \__)_____)\____)_| |_| (C)2013 Semtech Description: contains hardaware configuration Macros and Constants License: Revised BSD License, see LICENSE.TXT file include in the project Maintainer: Miguel Luis and Gregory Cristian */ /****************************************************************************** * @file stm32l0xx_hw_conf.h * @author MCD Application Team * @version V1.1.2 * @date 08-September-2017 * @brief contains hardaware configuration Macros and Constants ****************************************************************************** * @attention * *

© Copyright (c) 2017 STMicroelectronics International N.V. * All rights reserved.

* * Redistribution and use in source and binary forms, with or without * modification, are permitted, provided that the following conditions are met: * * 1. Redistribution of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of other * contributors to this software may be used to endorse or promote products * derived from this software without specific written permission. * 4. This software, including modifications and/or derivative works of this * software, must execute solely and exclusively on microcontroller or * microprocessor devices manufactured by or for STMicroelectronics. * 5. Redistribution and use of this software other than as permitted under * this license is void and will automatically terminate your rights under * this license. * * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __HW_CONF_L0_H__ #define __HW_CONF_L0_H__ #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "hw.h" /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ //#define RADIO_DIO_4 //#define RADIO_DIO_5 /* LORA I/O definition */ #define RADIO_RESET_PORT GPIOA #define RADIO_RESET_PIN GPIO_PIN_0 #define RADIO_MOSI_PORT GPIOA #define RADIO_MOSI_PIN GPIO_PIN_7 #define RADIO_MISO_PORT GPIOA #define RADIO_MISO_PIN GPIO_PIN_6 #define RADIO_SCLK_PORT GPIOA #define RADIO_SCLK_PIN GPIO_PIN_5 #define RADIO_NSS_PORT GPIOB #define RADIO_NSS_PIN GPIO_PIN_6 #define RADIO_DIO_0_PORT GPIOA #define RADIO_DIO_0_PIN GPIO_PIN_10 #define RADIO_DIO_1_PORT GPIOB #define RADIO_DIO_1_PIN GPIO_PIN_3 #define RADIO_DIO_2_PORT GPIOB #define RADIO_DIO_2_PIN GPIO_PIN_5 #define RADIO_DIO_3_PORT GPIOB #define RADIO_DIO_3_PIN GPIO_PIN_4 #ifdef RADIO_DIO_4 #define RADIO_DIO_4_PORT GPIOA #define RADIO_DIO_4_PIN GPIO_PIN_9 #endif #ifdef RADIO_DIO_5 #define RADIO_DIO_5_PORT GPIOC #define RADIO_DIO_5_PIN GPIO_PIN_7 #endif #define RADIO_ANT_SWITCH_PORT GPIOC #define RADIO_ANT_SWITCH_PIN GPIO_PIN_1 #define BAT_LEVEL_PORT GPIOA #define BAT_LEVEL_PIN GPIO_PIN_4 /* SPI MACRO redefinition */ #define SPI_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE() #define SPI1_AF GPIO_AF0_SPI1 /* ADC MACRO redefinition */ #ifdef USE_STM32L0XX_NUCLEO #define ADC_READ_CHANNEL ADC_CHANNEL_4 #define ADCCLK_ENABLE() __HAL_RCC_ADC1_CLK_ENABLE() ; #define ADCCLK_DISABLE() __HAL_RCC_ADC1_CLK_DISABLE() ; #endif /* --------------------------- RTC HW definition -------------------------------- */ #define RTC_OUTPUT DBG_RTC_OUTPUT #define RTC_Alarm_IRQn RTC_IRQn /* --------------------------- USART HW definition -------------------------------*/ #define USARTX USART2 #define USARTX_CLK_ENABLE() __USART2_CLK_ENABLE(); #define USARTX_RX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE() #define USARTX_TX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE() #define USARTX_FORCE_RESET() __USART2_FORCE_RESET() #define USARTX_RELEASE_RESET() __USART2_RELEASE_RESET() #define USARTX_TX_PIN GPIO_PIN_2 #define USARTX_TX_GPIO_PORT GPIOA #define USARTX_TX_AF GPIO_AF4_USART2 #define USARTX_RX_PIN GPIO_PIN_3 #define USARTX_RX_GPIO_PORT GPIOA #define USARTX_RX_AF GPIO_AF4_USART2 /* Definition for USARTx's NVIC */ #define USARTX_IRQn USART2_IRQn #define USARTX_IRQHandler USART2_IRQHandler #define LED_Toggle( x ) #define LED_On( x ) #define LED_Off( x ) #ifdef __cplusplus } #endif #endif /* __HW_CONF_L0_H__ */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/