B3M38SPD seminar project - beehive monitor with LoRa reporting
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
spd-lorabees/Inc/stm32l0xx_hw_conf.h

177 lines
6.7 KiB

7 years ago
/*
/ _____) _ | |
( (____ _____ ____ _| |_ _____ ____| |__
\____ \| ___ | (_ _) ___ |/ ___) _ \
_____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
(C)2013 Semtech
Description: contains hardaware configuration Macros and Constants
License: Revised BSD License, see LICENSE.TXT file include in the project
Maintainer: Miguel Luis and Gregory Cristian
*/
/******************************************************************************
* @file stm32l0xx_hw_conf.h
* @author MCD Application Team
* @version V1.1.2
* @date 08-September-2017
* @brief contains hardaware configuration Macros and Constants
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
* All rights reserved.</center></h2>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted, provided that the following conditions are met:
*
* 1. Redistribution of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of other
* contributors to this software may be used to endorse or promote products
* derived from this software without specific written permission.
* 4. This software, including modifications and/or derivative works of this
* software, must execute solely and exclusively on microcontroller or
* microprocessor devices manufactured by or for STMicroelectronics.
* 5. Redistribution and use of this software other than as permitted under
* this license is void and will automatically terminate your rights under
* this license.
*
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __HW_CONF_L0_H__
#define __HW_CONF_L0_H__
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "hw.h"
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
//#define RADIO_DIO_4
//#define RADIO_DIO_5
/* LORA I/O definition */
#define RADIO_RESET_PORT GPIOA
#define RADIO_RESET_PIN GPIO_PIN_0
#define RADIO_MOSI_PORT GPIOA
#define RADIO_MOSI_PIN GPIO_PIN_7
#define RADIO_MISO_PORT GPIOA
#define RADIO_MISO_PIN GPIO_PIN_6
#define RADIO_SCLK_PORT GPIOA
#define RADIO_SCLK_PIN GPIO_PIN_5
#define RADIO_NSS_PORT GPIOB
#define RADIO_NSS_PIN GPIO_PIN_6
#define RADIO_DIO_0_PORT GPIOA
#define RADIO_DIO_0_PIN GPIO_PIN_10
#define RADIO_DIO_1_PORT GPIOB
#define RADIO_DIO_1_PIN GPIO_PIN_3
#define RADIO_DIO_2_PORT GPIOB
#define RADIO_DIO_2_PIN GPIO_PIN_5
#define RADIO_DIO_3_PORT GPIOB
#define RADIO_DIO_3_PIN GPIO_PIN_4
#ifdef RADIO_DIO_4
#define RADIO_DIO_4_PORT GPIOA
#define RADIO_DIO_4_PIN GPIO_PIN_9
#endif
#ifdef RADIO_DIO_5
#define RADIO_DIO_5_PORT GPIOC
#define RADIO_DIO_5_PIN GPIO_PIN_7
#endif
#define RADIO_ANT_SWITCH_PORT GPIOC
#define RADIO_ANT_SWITCH_PIN GPIO_PIN_1
#define BAT_LEVEL_PORT GPIOA
#define BAT_LEVEL_PIN GPIO_PIN_4
/* SPI MACRO redefinition */
#define SPI_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE()
#define SPI1_AF GPIO_AF0_SPI1
/* ADC MACRO redefinition */
#ifdef USE_STM32L0XX_NUCLEO
#define ADC_READ_CHANNEL ADC_CHANNEL_4
#define ADCCLK_ENABLE() __HAL_RCC_ADC1_CLK_ENABLE() ;
#define ADCCLK_DISABLE() __HAL_RCC_ADC1_CLK_DISABLE() ;
#endif
/* --------------------------- RTC HW definition -------------------------------- */
#define RTC_OUTPUT DBG_RTC_OUTPUT
#define RTC_Alarm_IRQn RTC_IRQn
/* --------------------------- USART HW definition -------------------------------*/
#define USARTX USART2
#define USARTX_CLK_ENABLE() __USART2_CLK_ENABLE();
#define USARTX_RX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
#define USARTX_TX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
#define USARTX_FORCE_RESET() __USART2_FORCE_RESET()
#define USARTX_RELEASE_RESET() __USART2_RELEASE_RESET()
#define USARTX_TX_PIN GPIO_PIN_2
#define USARTX_TX_GPIO_PORT GPIOA
#define USARTX_TX_AF GPIO_AF4_USART2
#define USARTX_RX_PIN GPIO_PIN_3
#define USARTX_RX_GPIO_PORT GPIOA
#define USARTX_RX_AF GPIO_AF4_USART2
/* Definition for USARTx's NVIC */
#define USARTX_IRQn USART2_IRQn
#define USARTX_IRQHandler USART2_IRQHandler
#define LED_Toggle( x )
#define LED_On( x )
#define LED_Off( x )
#ifdef __cplusplus
}
#endif
#endif /* __HW_CONF_L0_H__ */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/