B3M38SPD seminar project - beehive monitor with LoRa reporting
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

226 lines
7.9 KiB

/**
* Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* Neither the name of the copyright holder nor the names of the
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER
* OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
*
* The information provided is believed to be accurate and reliable.
* The copyright holder assumes no responsibility
* for the consequences of use
* of such information nor for any infringement of patents or
* other rights of third parties which may result from its use.
* No license is granted by implication or otherwise under any patent or
* patent rights of the copyright holder.
*
* @file bme680.h
* @date 30 Oct 2017
* @version 3.5.3
* @brief
*
*/
/*! @file bme680.h
@brief Sensor driver for BME680 sensor */
/*!
* @defgroup BME680 SENSOR API
* @{*/
#ifndef BME680_H_
#define BME680_H_
/*! CPP guard */
#ifdef __cplusplus
extern "C"
{
#endif
/* Header includes */
#include "bme680_defs.h"
/* function prototype declarations */
/*!
* @brief This API is the entry point.
* It reads the chip-id and calibration data from the sensor.
*
* @param[in,out] dev : Structure instance of bme680_dev
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme680_init(struct bme680_dev *dev);
/*!
* @brief This API writes the given data to the register address
* of the sensor.
*
* @param[in] reg_addr : Register address from where the data to be written.
* @param[in] reg_data : Pointer to data buffer which is to be written
* in the sensor.
* @param[in] len : No of bytes of data to write..
* @param[in] dev : Structure instance of bme680_dev.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme680_set_regs(const uint8_t *reg_addr, const uint8_t *reg_data, uint8_t len, struct bme680_dev *dev);
/*!
* @brief This API reads the data from the given register address of the sensor.
*
* @param[in] reg_addr : Register address from where the data to be read
* @param[out] reg_data : Pointer to data buffer to store the read data.
* @param[in] len : No of bytes of data to be read.
* @param[in] dev : Structure instance of bme680_dev.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme680_get_regs(uint8_t reg_addr, uint8_t *reg_data, uint16_t len, struct bme680_dev *dev);
/*!
* @brief This API performs the soft reset of the sensor.
*
* @param[in] dev : Structure instance of bme680_dev.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
*/
int8_t bme680_soft_reset(struct bme680_dev *dev);
/*!
* @brief This API is used to set the power mode of the sensor.
*
* @param[in] dev : Structure instance of bme680_dev
* @note : Pass the value to bme680_dev.power_mode structure variable.
*
* value | mode
* -------------|------------------
* 0x00 | BME680_SLEEP_MODE
* 0x01 | BME680_FORCED_MODE
*
* * @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme680_set_sensor_mode(struct bme680_dev *dev);
/*!
* @brief This API is used to get the power mode of the sensor.
*
* @param[in] dev : Structure instance of bme680_dev
* @note : bme680_dev.power_mode structure variable hold the power mode.
*
* value | mode
* ---------|------------------
* 0x00 | BME680_SLEEP_MODE
* 0x01 | BME680_FORCED_MODE
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme680_get_sensor_mode(struct bme680_dev *dev);
/*!
* @brief This API is used to set the profile duration of the sensor.
*
* @param[in] dev : Structure instance of bme680_dev.
* @param[in] duration : Duration of the measurement in ms.
*
* @return Nothing
*/
void bme680_set_profile_dur(uint16_t duration, struct bme680_dev *dev);
/*!
* @brief This API is used to get the profile duration of the sensor.
*
* @param[in] dev : Structure instance of bme680_dev.
* @param[in] duration : Duration of the measurement in ms.
*
* @return Nothing
*/
void bme680_get_profile_dur(uint16_t *duration, const struct bme680_dev *dev);
/*!
* @brief This API reads the pressure, temperature and humidity and gas data
* from the sensor, compensates the data and store it in the bme680_data
* structure instance passed by the user.
*
* @param[out] data: Structure instance to hold the data.
* @param[in] dev : Structure instance of bme680_dev.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme680_get_sensor_data(struct bme680_field_data *data, struct bme680_dev *dev);
/*!
* @brief This API is used to set the oversampling, filter and T,P,H, gas selection
* settings in the sensor.
*
* @param[in] dev : Structure instance of bme680_dev.
* @param[in] desired_settings : Variable used to select the settings which
* are to be set in the sensor.
*
* Macros | Functionality
*---------------------------------|----------------------------------------------
* BME680_OST_SEL | To set temperature oversampling.
* BME680_OSP_SEL | To set pressure oversampling.
* BME680_OSH_SEL | To set humidity oversampling.
* BME680_GAS_MEAS_SEL | To set gas measurement setting.
* BME680_FILTER_SEL | To set filter setting.
* BME680_HCNTRL_SEL | To set humidity control setting.
* BME680_RUN_GAS_SEL | To set run gas setting.
* BME680_NBCONV_SEL | To set NB conversion setting.
* BME680_GAS_SENSOR_SEL | To set all gas sensor related settings
*
* @note : Below are the macros to be used by the user for selecting the
* desired settings. User can do OR operation of these macros for configuring
* multiple settings.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
*/
int8_t bme680_set_sensor_settings(uint16_t desired_settings, struct bme680_dev *dev);
/*!
* @brief This API is used to get the oversampling, filter and T,P,H, gas selection
* settings in the sensor.
*
* @param[in] dev : Structure instance of bme680_dev.
* @param[in] desired_settings : Variable used to select the settings which
* are to be get from the sensor.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
*/
int8_t bme680_get_sensor_settings(uint16_t desired_settings, struct bme680_dev *dev);
#ifdef __cplusplus
}
#endif /* End of CPP guard */
#endif /* BME680_H_ */
/** @}*/