electro
/
remostat
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Regulátor pro remosku s STM8
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
4 Commits
1 Branch
0 Tags
182 KiB
Tag: Branch: Tree: master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'master'
${ noResults }
remostat/TinySPL_S103/stm8s_clk.h

1060 lines
35 KiB
Raw Permalink Normal View History Unescape

initial
8 years ago
/**
******************************************************************************
* @file stm8s_clk.h
* @author MCD Application Team
* @version V2.2.0
* @date 30-September-2014
* @brief This file contains all functions prototype and macros for the CLK peripheral.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM8S_CLK_H
#define __STM8S_CLK_H
/* Includes ------------------------------------------------------------------*/
/* Contains the description of all STM8 hardware registers */
#include "stm8s.h"
/* Exported types ------------------------------------------------------------*/
/** @addtogroup CLK_Exported_Types
* @{
*/
/**
* @brief Switch Mode Auto, Manual.
*/
typedef enum {
CLK_SWITCHMODE_MANUAL = (uint8_t) 0x00, /*!< Enable the manual clock switching mode */
CLK_SWITCHMODE_AUTO = (uint8_t) 0x01 /*!< Enable the automatic clock switching mode */
} CLK_SwitchMode_TypeDef;
/**
* @brief Current Clock State.
*/
typedef enum {
CLK_CURRENTCLOCKSTATE_DISABLE = (uint8_t) 0x00, /*!< Current clock disable */
CLK_CURRENTCLOCKSTATE_ENABLE = (uint8_t) 0x01 /*!< Current clock enable */
} CLK_CurrentClockState_TypeDef;
/**
* @brief Clock security system configuration.
*/
typedef enum {
CLK_CSSCONFIG_ENABLEWITHIT = (uint8_t) 0x05, /*!< Enable CSS with detection interrupt */
CLK_CSSCONFIG_ENABLE = (uint8_t) 0x01, /*!< Enable CSS without detection interrupt */
CLK_CSSCONFIG_DISABLE = (uint8_t) 0x00 /*!< Leave CSS desactivated (to be used in CLK_Init() function) */
} CLK_CSSConfig_TypeDef;
/**
* @brief CLK Clock Source.
*/
typedef enum {
CLK_SOURCE_HSI = (uint8_t) 0xE1, /*!< Clock Source HSI. */
CLK_SOURCE_LSI = (uint8_t) 0xD2, /*!< Clock Source LSI. */
CLK_SOURCE_HSE = (uint8_t) 0xB4 /*!< Clock Source HSE. */
} CLK_Source_TypeDef;
/**
* @brief CLK HSI Calibration Value.
*/
typedef enum {
CLK_HSITRIMVALUE_0 = (uint8_t) 0x00, /*!< HSI Calibration Value 0 */
CLK_HSITRIMVALUE_1 = (uint8_t) 0x01, /*!< HSI Calibration Value 1 */
CLK_HSITRIMVALUE_2 = (uint8_t) 0x02, /*!< HSI Calibration Value 2 */
CLK_HSITRIMVALUE_3 = (uint8_t) 0x03, /*!< HSI Calibration Value 3 */
CLK_HSITRIMVALUE_4 = (uint8_t) 0x04, /*!< HSI Calibration Value 4 */
CLK_HSITRIMVALUE_5 = (uint8_t) 0x05, /*!< HSI Calibration Value 5 */
CLK_HSITRIMVALUE_6 = (uint8_t) 0x06, /*!< HSI Calibration Value 6 */
CLK_HSITRIMVALUE_7 = (uint8_t) 0x07 /*!< HSI Calibration Value 7 */
} CLK_HSITrimValue_TypeDef;
/**
* @brief CLK Clock Output
*/
typedef enum {
CLK_OUTPUT_HSI = (uint8_t) 0x00, /*!< Clock Output HSI */
CLK_OUTPUT_LSI = (uint8_t) 0x02, /*!< Clock Output LSI */
CLK_OUTPUT_HSE = (uint8_t) 0x04, /*!< Clock Output HSE */
CLK_OUTPUT_CPU = (uint8_t) 0x08, /*!< Clock Output CPU */
CLK_OUTPUT_CPUDIV2 = (uint8_t) 0x0A, /*!< Clock Output CPU/2 */
CLK_OUTPUT_CPUDIV4 = (uint8_t) 0x0C, /*!< Clock Output CPU/4 */
CLK_OUTPUT_CPUDIV8 = (uint8_t) 0x0E, /*!< Clock Output CPU/8 */
CLK_OUTPUT_CPUDIV16 = (uint8_t) 0x10, /*!< Clock Output CPU/16 */
CLK_OUTPUT_CPUDIV32 = (uint8_t) 0x12, /*!< Clock Output CPU/32 */
CLK_OUTPUT_CPUDIV64 = (uint8_t) 0x14, /*!< Clock Output CPU/64 */
CLK_OUTPUT_HSIRC = (uint8_t) 0x16, /*!< Clock Output HSI RC */
CLK_OUTPUT_MASTER = (uint8_t) 0x18, /*!< Clock Output Master */
CLK_OUTPUT_OTHERS = (uint8_t) 0x1A /*!< Clock Output OTHER */
} CLK_Output_TypeDef;
/**
* @brief CLK Enable peripheral
*/
/* Elements values convention: 0xXY
X = choice between the peripheral registers
X = 0 : PCKENR1
X = 1 : PCKENR2
Y = Peripheral position in the register
*/
typedef enum {
CLK_PERIPHERAL_I2C = (uint8_t) 0x00, /*!< Peripheral Clock Enable 1, I2C */
CLK_PERIPHERAL_SPI = (uint8_t) 0x01, /*!< Peripheral Clock Enable 1, SPI */
#if defined(STM8S208) || defined(STM8S207) || defined(STM8S007) || defined(STM8AF52Ax) || defined(STM8AF62Ax)
CLK_PERIPHERAL_UART1 = (uint8_t)0x02, /*!< Peripheral Clock Enable 1, UART1 */
#else
CLK_PERIPHERAL_UART1 = (uint8_t) 0x03, /*!< Peripheral Clock Enable 1, UART1 */
#endif
CLK_PERIPHERAL_UART2 = (uint8_t) 0x03, /*!< Peripheral Clock Enable 1, UART2 */
CLK_PERIPHERAL_UART3 = (uint8_t) 0x03, /*!< Peripheral Clock Enable 1, UART3 */
CLK_PERIPHERAL_TIMER6 = (uint8_t) 0x04, /*!< Peripheral Clock Enable 1, Timer6 */
CLK_PERIPHERAL_TIMER4 = (uint8_t) 0x04, /*!< Peripheral Clock Enable 1, Timer4 */
CLK_PERIPHERAL_TIMER5 = (uint8_t) 0x05, /*!< Peripheral Clock Enable 1, Timer5 */
CLK_PERIPHERAL_TIMER2 = (uint8_t) 0x05, /*!< Peripheral Clock Enable 1, Timer2 */
CLK_PERIPHERAL_TIMER3 = (uint8_t) 0x06, /*!< Peripheral Clock Enable 1, Timer3 */
CLK_PERIPHERAL_TIMER1 = (uint8_t) 0x07, /*!< Peripheral Clock Enable 1, Timer1 */
CLK_PERIPHERAL_AWU = (uint8_t) 0x12, /*!< Peripheral Clock Enable 2, AWU */
CLK_PERIPHERAL_ADC = (uint8_t) 0x13, /*!< Peripheral Clock Enable 2, ADC */
CLK_PERIPHERAL_CAN = (uint8_t) 0x17 /*!< Peripheral Clock Enable 2, CAN */
} CLK_Peripheral_TypeDef;
/**
* @brief CLK Flags.
*/
/* Elements values convention: 0xXZZ
X = choice between the flags registers
X = 1 : ICKR
X = 2 : ECKR
X = 3 : SWCR
X = 4 : CSSR
X = 5 : CCOR
ZZ = flag mask in the register (same as map file)
*/
typedef enum {
CLK_FLAG_LSIRDY = (uint16_t) 0x0110, /*!< Low speed internal oscillator ready Flag */
CLK_FLAG_HSIRDY = (uint16_t) 0x0102, /*!< High speed internal oscillator ready Flag */
CLK_FLAG_HSERDY = (uint16_t) 0x0202, /*!< High speed external oscillator ready Flag */
CLK_FLAG_SWIF = (uint16_t) 0x0308, /*!< Clock switch interrupt Flag */
CLK_FLAG_SWBSY = (uint16_t) 0x0301, /*!< Switch busy Flag */
CLK_FLAG_CSSD = (uint16_t) 0x0408, /*!< Clock security system detection Flag */
CLK_FLAG_AUX = (uint16_t) 0x0402, /*!< Auxiliary oscillator connected to master clock */
CLK_FLAG_CCOBSY = (uint16_t) 0x0504, /*!< Configurable clock output busy */
CLK_FLAG_CCORDY = (uint16_t) 0x0502 /*!< Configurable clock output ready */
} CLK_Flag_TypeDef;
/**
* @brief CLK interrupt configuration and Flags cleared by software.
*/
typedef enum {
CLK_IT_CSSD = (uint8_t) 0x0C, /*!< Clock security system detection Flag */
CLK_IT_SWIF = (uint8_t) 0x1C /*!< Clock switch interrupt Flag */
} CLK_IT_TypeDef;
/**
* @brief CLK Clock Divisor.
*/
/* Warning:
0xxxxxx = HSI divider
1xxxxxx = CPU divider
Other bits correspond to the divider's bits mapping
*/
typedef enum {
CLK_PRESCALER_HSIDIV1 = (uint8_t) 0x00, /*!< High speed internal clock prescaler: 1 */
CLK_PRESCALER_HSIDIV2 = (uint8_t) 0x08, /*!< High speed internal clock prescaler: 2 */
CLK_PRESCALER_HSIDIV4 = (uint8_t) 0x10, /*!< High speed internal clock prescaler: 4 */
CLK_PRESCALER_HSIDIV8 = (uint8_t) 0x18, /*!< High speed internal clock prescaler: 8 */
CLK_PRESCALER_CPUDIV1 = (uint8_t) 0x80, /*!< CPU clock division factors 1 */
CLK_PRESCALER_CPUDIV2 = (uint8_t) 0x81, /*!< CPU clock division factors 2 */
CLK_PRESCALER_CPUDIV4 = (uint8_t) 0x82, /*!< CPU clock division factors 4 */
CLK_PRESCALER_CPUDIV8 = (uint8_t) 0x83, /*!< CPU clock division factors 8 */
CLK_PRESCALER_CPUDIV16 = (uint8_t) 0x84, /*!< CPU clock division factors 16 */
CLK_PRESCALER_CPUDIV32 = (uint8_t) 0x85, /*!< CPU clock division factors 32 */
CLK_PRESCALER_CPUDIV64 = (uint8_t) 0x86, /*!< CPU clock division factors 64 */
CLK_PRESCALER_CPUDIV128 = (uint8_t) 0x87 /*!< CPU clock division factors 128 */
} CLK_Prescaler_TypeDef;
/**
* @brief SWIM Clock divider.
*/
typedef enum {
CLK_SWIMDIVIDER_2 = (uint8_t) 0x00, /*!< SWIM clock is divided by 2 */
CLK_SWIMDIVIDER_OTHER = (uint8_t) 0x01 /*!< SWIM clock is not divided by 2 */
} CLK_SWIMDivider_TypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @addtogroup CLK_Exported_Constants
* @{
*/
#define CLK_TIMEOUT ((uint16_t)0xFFFF) /*!< Max Timeout for the clock switch operation. */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup CLK_Private_Macros
* @{
*/
/**
* @brief Macros used by the assert function in order to check the different functions parameters.
*/
/**
* @brief Macros used by the assert function in order to check the clock switching modes.
*/
#define IS_CLK_SWITCHMODE_OK(MODE) (((MODE) == CLK_SWITCHMODE_MANUAL) || ((MODE) == CLK_SWITCHMODE_AUTO))
/**
* @brief Macros used by the assert function in order to check the current clock state.
*/
#define IS_CLK_CURRENTCLOCKSTATE_OK(STATE) (((STATE) == CLK_CURRENTCLOCKSTATE_DISABLE) ||\
((STATE) == CLK_CURRENTCLOCKSTATE_ENABLE))
/**
* @brief Macros used by the assert function in order to check the CSS configuration.
*/
#define IS_CLK_CSSCONFIG_OK(CSSVALUE) (((CSSVALUE) == CLK_CSSCONFIG_ENABLEWITHIT) ||\
((CSSVALUE) == CLK_CSSCONFIG_ENABLE) ||\
((CSSVALUE) == CLK_CSSCONFIG_DISABLE))
/**
* @brief Macros used by the assert function in order to check the different clock sources.
*/
#define IS_CLK_SOURCE_OK(SOURCE) (((SOURCE) == CLK_SOURCE_HSI) ||\
((SOURCE) == CLK_SOURCE_LSI) ||\
((SOURCE) == CLK_SOURCE_HSE))
/**
* @brief Macros used by the assert function in order to check the different HSI trimming values.
*/
#define IS_CLK_HSITRIMVALUE_OK(TRIMVALUE) (((TRIMVALUE) == CLK_HSITRIMVALUE_0) ||\
((TRIMVALUE) == CLK_HSITRIMVALUE_1) ||\
((TRIMVALUE) == CLK_HSITRIMVALUE_2) ||\
((TRIMVALUE) == CLK_HSITRIMVALUE_3) ||\
((TRIMVALUE) == CLK_HSITRIMVALUE_4) ||\
((TRIMVALUE) == CLK_HSITRIMVALUE_5) ||\
((TRIMVALUE) == CLK_HSITRIMVALUE_6) ||\
((TRIMVALUE) == CLK_HSITRIMVALUE_7))
/**
* @brief Macros used by the assert function in order to check the different clocks to output.
*/
#define IS_CLK_OUTPUT_OK(OUTPUT) (((OUTPUT) == CLK_OUTPUT_HSI) ||\
((OUTPUT) == CLK_OUTPUT_HSE) ||\
((OUTPUT) == CLK_OUTPUT_LSI) ||\
((OUTPUT) == CLK_OUTPUT_CPU) ||\
((OUTPUT) == CLK_OUTPUT_CPUDIV2) ||\
((OUTPUT) == CLK_OUTPUT_CPUDIV4) ||\
((OUTPUT) == CLK_OUTPUT_CPUDIV8) ||\
((OUTPUT) == CLK_OUTPUT_CPUDIV16) ||\
((OUTPUT) == CLK_OUTPUT_CPUDIV32) ||\
((OUTPUT) == CLK_OUTPUT_CPUDIV64) ||\
((OUTPUT) == CLK_OUTPUT_HSIRC) ||\
((OUTPUT) == CLK_OUTPUT_MASTER) ||\
((OUTPUT) == CLK_OUTPUT_OTHERS))
/**
* @brief Macros used by the assert function in order to check the different peripheral's clock.
*/
#define IS_CLK_PERIPHERAL_OK(PERIPHERAL) (((PERIPHERAL) == CLK_PERIPHERAL_I2C) ||\
((PERIPHERAL) == CLK_PERIPHERAL_SPI) ||\
((PERIPHERAL) == CLK_PERIPHERAL_UART3) ||\
((PERIPHERAL) == CLK_PERIPHERAL_UART2) ||\
((PERIPHERAL) == CLK_PERIPHERAL_UART1) ||\
((PERIPHERAL) == CLK_PERIPHERAL_TIMER4) ||\
((PERIPHERAL) == CLK_PERIPHERAL_TIMER2) ||\
((PERIPHERAL) == CLK_PERIPHERAL_TIMER5) ||\
((PERIPHERAL) == CLK_PERIPHERAL_TIMER6) ||\
((PERIPHERAL) == CLK_PERIPHERAL_TIMER3) ||\
((PERIPHERAL) == CLK_PERIPHERAL_TIMER1) ||\
((PERIPHERAL) == CLK_PERIPHERAL_CAN) ||\
((PERIPHERAL) == CLK_PERIPHERAL_ADC) ||\
((PERIPHERAL) == CLK_PERIPHERAL_AWU))
/**
* @brief Macros used by the assert function in order to check the different clock flags.
*/
#define IS_CLK_FLAG_OK(FLAG) (((FLAG) == CLK_FLAG_LSIRDY) ||\
((FLAG) == CLK_FLAG_HSIRDY) ||\
((FLAG) == CLK_FLAG_HSERDY) ||\
((FLAG) == CLK_FLAG_SWIF) ||\
((FLAG) == CLK_FLAG_SWBSY) ||\
((FLAG) == CLK_FLAG_CSSD) ||\
((FLAG) == CLK_FLAG_AUX) ||\
((FLAG) == CLK_FLAG_CCOBSY) ||\
((FLAG) == CLK_FLAG_CCORDY))
/**
* @brief Macros used by the assert function in order to check the different clock IT pending bits.
*/
#define IS_CLK_IT_OK(IT) (((IT) == CLK_IT_CSSD) || ((IT) == CLK_IT_SWIF))
/**
* @brief Macros used by the assert function in order to check the different HSI prescaler values.
*/
#define IS_CLK_HSIPRESCALER_OK(PRESCALER) (((PRESCALER) == CLK_PRESCALER_HSIDIV1) ||\
((PRESCALER) == CLK_PRESCALER_HSIDIV2) ||\
((PRESCALER) == CLK_PRESCALER_HSIDIV4) ||\
((PRESCALER) == CLK_PRESCALER_HSIDIV8))
/**
* @brief Macros used by the assert function in order to check the different clock prescaler values.
*/
#define IS_CLK_PRESCALER_OK(PRESCALER) (((PRESCALER) == CLK_PRESCALER_HSIDIV1) ||\
((PRESCALER) == CLK_PRESCALER_HSIDIV2) ||\
((PRESCALER) == CLK_PRESCALER_HSIDIV4) ||\
((PRESCALER) == CLK_PRESCALER_HSIDIV8) ||\
((PRESCALER) == CLK_PRESCALER_CPUDIV1) ||\
((PRESCALER) == CLK_PRESCALER_CPUDIV2) ||\
((PRESCALER) == CLK_PRESCALER_CPUDIV4) ||\
((PRESCALER) == CLK_PRESCALER_CPUDIV8) ||\
((PRESCALER) == CLK_PRESCALER_CPUDIV16) ||\
((PRESCALER) == CLK_PRESCALER_CPUDIV32) ||\
((PRESCALER) == CLK_PRESCALER_CPUDIV64) ||\
((PRESCALER) == CLK_PRESCALER_CPUDIV128))
/**
* @brief Macros used by the assert function in order to check the different SWIM dividers values.
*/
#define IS_CLK_SWIMDIVIDER_OK(SWIMDIVIDER) (((SWIMDIVIDER) == CLK_SWIMDIVIDER_2) || ((SWIMDIVIDER) == CLK_SWIMDIVIDER_OTHER))
#if 0
/**
* @}
*/
/** @addtogroup CLK_Exported_functions
* @{
*/
void CLK_DeInit(void);
void CLK_HSECmd(FunctionalState NewState);
void CLK_HSICmd(FunctionalState NewState);
void CLK_LSICmd(FunctionalState NewState);
void CLK_CCOCmd(FunctionalState NewState);
void CLK_ClockSwitchCmd(FunctionalState NewState);
void CLK_FastHaltWakeUpCmd(FunctionalState NewState);
void CLK_SlowActiveHaltWakeUpCmd(FunctionalState NewState);
void CLK_PeripheralClockConfig(CLK_Peripheral_TypeDef CLK_Peripheral, FunctionalState NewState);
ErrorStatus
CLK_ClockSwitchConfig(CLK_SwitchMode_TypeDef CLK_SwitchMode, CLK_Source_TypeDef CLK_NewClock, FunctionalState ITState,
CLK_CurrentClockState_TypeDef CLK_CurrentClockState);
void CLK_HSIPrescalerConfig(CLK_Prescaler_TypeDef HSIPrescaler);
void CLK_CCOConfig(CLK_Output_TypeDef CLK_CCO);
void CLK_ITConfig(CLK_IT_TypeDef CLK_IT, FunctionalState NewState);
void CLK_SYSCLKConfig(CLK_Prescaler_TypeDef CLK_Prescaler);
void CLK_SWIMConfig(CLK_SWIMDivider_TypeDef CLK_SWIMDivider);
void CLK_ClockSecuritySystemEnable(void);
void CLK_SYSCLKEmergencyClear(void);
void CLK_AdjustHSICalibrationValue(CLK_HSITrimValue_TypeDef CLK_HSICalibrationValue);
uint32_t CLK_GetClockFreq(void);
CLK_Source_TypeDef CLK_GetSYSCLKSource(void);
FlagStatus CLK_GetFlagStatus(CLK_Flag_TypeDef CLK_FLAG);
ITStatus CLK_GetITStatus(CLK_IT_TypeDef CLK_IT);
void CLK_ClearITPendingBit(CLK_IT_TypeDef CLK_IT);
#endif
/** @addtogroup STM8S_StdPeriph_Driver
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private Constants ---------------------------------------------------------*/
/**
* @addtogroup CLK_Private_Constants
* @{
*/
//CONST uint8_t CLKPrescTable[8] = {1, 2, 4, 8, 10, 16, 20, 40}; /*!< Holds the different CLK prescaler values */
/**
* @}
*/
/* Public functions ----------------------------------------------------------*/
/**
* @addtogroup CLK_Public_Functions
* @{
*/
/**
* @brief Deinitializes the CLK peripheral registers to their default reset
* values.
* @param None
* @retval None
* @par Warning:
* Resetting the CCOR register: \n
* When the CCOEN bit is set, the reset of the CCOR register require
* two consecutive write instructions in order to reset first the CCOEN bit
* and the second one is to reset the CCOSEL bits.
*/
inline void CLK_DeInit(void)
{
CLK->ICKR = CLK_ICKR_RESET_VALUE;
CLK->ECKR = CLK_ECKR_RESET_VALUE;
CLK->SWR = CLK_SWR_RESET_VALUE;
CLK->SWCR = CLK_SWCR_RESET_VALUE;
CLK->CKDIVR = CLK_CKDIVR_RESET_VALUE;
CLK->PCKENR1 = CLK_PCKENR1_RESET_VALUE;
CLK->PCKENR2 = CLK_PCKENR2_RESET_VALUE;
CLK->CSSR = CLK_CSSR_RESET_VALUE;
CLK->CCOR = CLK_CCOR_RESET_VALUE;
while ((CLK->CCOR & CLK_CCOR_CCOEN) != 0) {}
CLK->CCOR = CLK_CCOR_RESET_VALUE;
CLK->HSITRIMR = CLK_HSITRIMR_RESET_VALUE;
CLK->SWIMCCR = CLK_SWIMCCR_RESET_VALUE;
}
/**
* @brief Configures the High Speed Internal oscillator (HSI).
* @par Full description:
* If CLK_FastHaltWakeup is enabled, HSI oscillator is automatically
* switched-on (HSIEN=1) and selected as next clock master
* (CKM=SWI=HSI) when resuming from HALT/ActiveHalt modes.\n
* @param NewState this parameter is the Wake-up Mode state.
* @retval None
*/
inline void CLK_FastHaltWakeUpCmd(FunctionalState NewState)
{
/* check the parameters */
assert_param(IS_FUNCTIONALSTATE_OK(NewState));
if (NewState != DISABLE) {
/* Set FHWU bit (HSI oscillator is automatically switched-on) */
CLK->ICKR |= CLK_ICKR_FHWU;
} else /* FastHaltWakeup = DISABLE */
{
/* Reset FHWU bit */
CLK->ICKR &= (uint8_t) (~CLK_ICKR_FHWU);
}
}
/**
* @brief Enable or Disable the External High Speed oscillator (HSE).
* @param NewState new state of HSEEN, value accepted ENABLE, DISABLE.
* @retval None
*/
inline void CLK_HSECmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONALSTATE_OK(NewState));
if (NewState != DISABLE) {
/* Set HSEEN bit */
CLK->ECKR |= CLK_ECKR_HSEEN;
} else {
/* Reset HSEEN bit */
CLK->ECKR &= (uint8_t) (~CLK_ECKR_HSEEN);
}
}
/**
* @brief Enables or disables the Internal High Speed oscillator (HSI).
* @param NewState new state of HSIEN, value accepted ENABLE, DISABLE.
* @retval None
*/
inline void CLK_HSICmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONALSTATE_OK(NewState));
if (NewState != DISABLE) {
/* Set HSIEN bit */
CLK->ICKR |= CLK_ICKR_HSIEN;
} else {
/* Reset HSIEN bit */
CLK->ICKR &= (uint8_t) (~CLK_ICKR_HSIEN);
}
}
/**
* @brief Enables or disables the Internal Low Speed oscillator (LSI).
* @param NewState new state of LSIEN, value accepted ENABLE, DISABLE.
* @note Before using the LSI clock you have to enable the option bytes (LSI_EN option bit is set).
* @retval None
*/
inline void CLK_LSICmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONALSTATE_OK(NewState));
if (NewState != DISABLE) {
/* Set LSIEN bit */
CLK->ICKR |= CLK_ICKR_LSIEN;
} else {
/* Reset LSIEN bit */
CLK->ICKR &= (uint8_t) (~CLK_ICKR_LSIEN);
}
}
/**
* @brief Enables or disablle the Configurable Clock Output (CCO).
* @param NewState : New state of CCEN bit (CCO register).
* This parameter can be any of the @ref FunctionalState enumeration.
* @retval None
*/
inline void CLK_CCOCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONALSTATE_OK(NewState));
if (NewState != DISABLE) {
/* Set CCOEN bit */
CLK->CCOR |= CLK_CCOR_CCOEN;
} else {
/* Reset CCOEN bit */
CLK->CCOR &= (uint8_t) (~CLK_CCOR_CCOEN);
}
}
/**
* @brief Starts or Stops manually the clock switch execution.
* @par Full description:
* NewState parameter set the SWEN.
* @param NewState new state of SWEN, value accepted ENABLE, DISABLE.
* @retval None
*/
inline void CLK_ClockSwitchCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONALSTATE_OK(NewState));
if (NewState != DISABLE) {
/* Enable the Clock Switch */
CLK->SWCR |= CLK_SWCR_SWEN;
} else {
/* Disable the Clock Switch */
CLK->SWCR &= (uint8_t) (~CLK_SWCR_SWEN);
}
}
/**
* @brief Configures the slow active halt wake up
* @param NewState: specifies the Slow Active Halt wake up state.
* can be set of the following values:
* - DISABLE: Slow Active Halt mode disabled;
* - ENABLE: Slow Active Halt mode enabled.
* @retval None
*/
inline void CLK_SlowActiveHaltWakeUpCmd(FunctionalState NewState)
{
/* check the parameters */
assert_param(IS_FUNCTIONALSTATE_OK(NewState));
if (NewState != DISABLE) {
/* Set S_ACTHALT bit */
CLK->ICKR |= CLK_ICKR_SWUAH;
} else {
/* Reset S_ACTHALT bit */
CLK->ICKR &= (uint8_t) (~CLK_ICKR_SWUAH);
}
}
/**
* @brief Enables or disables the specified peripheral CLK.
* @param CLK_Peripheral : This parameter specifies the peripheral clock to gate.
* This parameter can be any of the @ref CLK_Peripheral_TypeDef enumeration.
* @param NewState : New state of specified peripheral clock.
* This parameter can be any of the @ref FunctionalState enumeration.
* @retval None
*/
inline void CLK_PeripheralClockConfig(CLK_Peripheral_TypeDef CLK_Peripheral, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONALSTATE_OK(NewState));
assert_param(IS_CLK_PERIPHERAL_OK(CLK_Peripheral));
if (((uint8_t) CLK_Peripheral & (uint8_t) 0x10) == 0x00) {
if (NewState != DISABLE) {
/* Enable the peripheral Clock */
CLK->PCKENR1 |= (uint8_t) ((uint8_t) 1 << ((uint8_t) CLK_Peripheral & (uint8_t) 0x0F));
} else {
/* Disable the peripheral Clock */
CLK->PCKENR1 &= (uint8_t) (~(uint8_t) (((uint8_t) 1 << ((uint8_t) CLK_Peripheral & (uint8_t) 0x0F))));
}
} else {
if (NewState != DISABLE) {
/* Enable the peripheral Clock */
CLK->PCKENR2 |= (uint8_t) ((uint8_t) 1 << ((uint8_t) CLK_Peripheral & (uint8_t) 0x0F));
} else {
/* Disable the peripheral Clock */
CLK->PCKENR2 &= (uint8_t) (~(uint8_t) (((uint8_t) 1 << ((uint8_t) CLK_Peripheral & (uint8_t) 0x0F))));
}
}
}
/**
* @brief configures the Switch from one clock to another
* @param CLK_SwitchMode select the clock switch mode.
* It can be set of the values of @ref CLK_SwitchMode_TypeDef
* @param CLK_NewClock choice of the future clock.
* It can be set of the values of @ref CLK_Source_TypeDef
* @param NewState Enable or Disable the Clock Switch interrupt.
* @param CLK_CurrentClockState current clock to switch OFF or to keep ON.
* It can be set of the values of @ref CLK_CurrentClockState_TypeDef
* @note LSI selected as master clock source only if LSI_EN option bit is set.
* @retval ErrorStatus this shows the clock switch status (ERROR/SUCCESS).
*/
inline ErrorStatus
CLK_ClockSwitchConfig(CLK_SwitchMode_TypeDef CLK_SwitchMode, CLK_Source_TypeDef CLK_NewClock, FunctionalState ITState,
CLK_CurrentClockState_TypeDef CLK_CurrentClockState)
{
CLK_Source_TypeDef clock_master;
uint16_t DownCounter = CLK_TIMEOUT;
ErrorStatus Swif = ERROR;
/* Check the parameters */
assert_param(IS_CLK_SOURCE_OK(CLK_NewClock));
assert_param(IS_CLK_SWITCHMODE_OK(CLK_SwitchMode));
assert_param(IS_FUNCTIONALSTATE_OK(ITState));
assert_param(IS_CLK_CURRENTCLOCKSTATE_OK(CLK_CurrentClockState));
/* Current clock master saving */
clock_master = (CLK_Source_TypeDef) CLK->CMSR;
/* Automatic switch mode management */
if (CLK_SwitchMode == CLK_SWITCHMODE_AUTO) {
/* Enables Clock switch */
CLK->SWCR |= CLK_SWCR_SWEN;
/* Enables or Disables Switch interrupt */
if (ITState != DISABLE) {
CLK->SWCR |= CLK_SWCR_SWIEN;
} else {
CLK->SWCR &= (uint8_t) (~CLK_SWCR_SWIEN);
}
/* Selection of the target clock source */
CLK->SWR = (uint8_t) CLK_NewClock;
/* Wait until the target clock source is ready */
while ((((CLK->SWCR & CLK_SWCR_SWBSY) != 0) && (DownCounter != 0))) {
DownCounter--;
}
if (DownCounter != 0) {
Swif = SUCCESS;
} else {
Swif = ERROR;
}
} else /* CLK_SwitchMode == CLK_SWITCHMODE_MANUAL */
{
/* Enables or Disables Switch interrupt if required */
if (ITState != DISABLE) {
CLK->SWCR |= CLK_SWCR_SWIEN;
} else {
CLK->SWCR &= (uint8_t) (~CLK_SWCR_SWIEN);
}
/* Selection of the target clock source */
CLK->SWR = (uint8_t) CLK_NewClock;
/* Wait until the target clock source is ready */
while ((((CLK->SWCR & CLK_SWCR_SWIF) != 0) && (DownCounter != 0))) {
DownCounter--;
}
if (DownCounter != 0) {
/* Enables Clock switch */
CLK->SWCR |= CLK_SWCR_SWEN;
Swif = SUCCESS;
} else {
Swif = ERROR;
}
}
if (Swif != ERROR) {
/* Switch OFF current clock if required */
if ((CLK_CurrentClockState == CLK_CURRENTCLOCKSTATE_DISABLE) && (clock_master == CLK_SOURCE_HSI)) {
CLK->ICKR &= (uint8_t) (~CLK_ICKR_HSIEN);
} else if ((CLK_CurrentClockState == CLK_CURRENTCLOCKSTATE_DISABLE) && (clock_master == CLK_SOURCE_LSI)) {
CLK->ICKR &= (uint8_t) (~CLK_ICKR_LSIEN);
} else if ((CLK_CurrentClockState == CLK_CURRENTCLOCKSTATE_DISABLE) && (clock_master == CLK_SOURCE_HSE)) {
CLK->ECKR &= (uint8_t) (~CLK_ECKR_HSEEN);
}
}
return (Swif);
}
/**
* @brief Configures the HSI clock dividers.
* @param HSIPrescaler : Specifies the HSI clock divider to apply.
* This parameter can be any of the @ref CLK_Prescaler_TypeDef enumeration.
* @retval None
*/
inline void CLK_HSIPrescalerConfig(CLK_Prescaler_TypeDef HSIPrescaler)
{
/* check the parameters */
assert_param(IS_CLK_HSIPRESCALER_OK(HSIPrescaler));
/* Clear High speed internal clock prescaler */
CLK->CKDIVR &= (uint8_t) (~CLK_CKDIVR_HSIDIV);
/* Set High speed internal clock prescaler */
CLK->CKDIVR |= (uint8_t) HSIPrescaler;
}
/**
* @brief Output the selected clock on a dedicated I/O pin.
* @param CLK_CCO : Specifies the clock source.
* This parameter can be any of the @ref CLK_Output_TypeDef enumeration.
* @retval None
* @par Required preconditions:
* The dedicated I/O pin must be set at 1 in the corresponding Px_CR1 register \n
* to be set as input with pull-up or push-pull output.
*/
inline void CLK_CCOConfig(CLK_Output_TypeDef CLK_CCO)
{
/* check the parameters */
assert_param(IS_CLK_OUTPUT_OK(CLK_CCO));
/* Clears of the CCO type bits part */
CLK->CCOR &= (uint8_t) (~CLK_CCOR_CCOSEL);
/* Selects the source provided on cco_ck output */
CLK->CCOR |= (uint8_t) CLK_CCO;
/* Enable the clock output */
CLK->CCOR |= CLK_CCOR_CCOEN;
}
/**
* @brief Enables or disables the specified CLK interrupts.
* @param CLK_IT This parameter specifies the interrupt sources.
* It can be one of the values of @ref CLK_IT_TypeDef.
* @param NewState New state of the Interrupt.
* Value accepted ENABLE, DISABLE.
* @retval None
*/
inline void CLK_ITConfig(CLK_IT_TypeDef CLK_IT, FunctionalState NewState)
{
/* check the parameters */
assert_param(IS_FUNCTIONALSTATE_OK(NewState));
assert_param(IS_CLK_IT_OK(CLK_IT));
if (NewState != DISABLE) {
switch (CLK_IT) {
case CLK_IT_SWIF: /* Enable the clock switch interrupt */
CLK->SWCR |= CLK_SWCR_SWIEN;
break;
case CLK_IT_CSSD: /* Enable the clock security system detection interrupt */
CLK->CSSR |= CLK_CSSR_CSSDIE;
break;
default:
break;
}
} else /*(NewState == DISABLE)*/
{
switch (CLK_IT) {
case CLK_IT_SWIF: /* Disable the clock switch interrupt */
CLK->SWCR &= (uint8_t) (~CLK_SWCR_SWIEN);
break;
case CLK_IT_CSSD: /* Disable the clock security system detection interrupt */
CLK->CSSR &= (uint8_t) (~CLK_CSSR_CSSDIE);
break;
default:
break;
}
}
}
/**
* @brief Configures the HSI and CPU clock dividers.
* @param ClockPrescaler Specifies the HSI or CPU clock divider to apply.
* @retval None
*/
inline void CLK_SYSCLKConfig(CLK_Prescaler_TypeDef CLK_Prescaler)
{
/* check the parameters */
assert_param(IS_CLK_PRESCALER_OK(CLK_Prescaler));
if (((uint8_t) CLK_Prescaler & (uint8_t) 0x80) == 0x00) /* Bit7 = 0 means HSI divider */
{
CLK->CKDIVR &= (uint8_t) (~CLK_CKDIVR_HSIDIV);
CLK->CKDIVR |= (uint8_t) ((uint8_t) CLK_Prescaler & (uint8_t) CLK_CKDIVR_HSIDIV);
} else /* Bit7 = 1 means CPU divider */
{
CLK->CKDIVR &= (uint8_t) (~CLK_CKDIVR_CPUDIV);
CLK->CKDIVR |= (uint8_t) ((uint8_t) CLK_Prescaler & (uint8_t) CLK_CKDIVR_CPUDIV);
}
}
/**
* @brief Configures the SWIM clock frequency on the fly.
* @param CLK_SWIMDivider Specifies the SWIM clock divider to apply.
* can be one of the value of @ref CLK_SWIMDivider_TypeDef
* @retval None
*/
inline void CLK_SWIMConfig(CLK_SWIMDivider_TypeDef CLK_SWIMDivider)
{
/* check the parameters */
assert_param(IS_CLK_SWIMDIVIDER_OK(CLK_SWIMDivider));
if (CLK_SWIMDivider != CLK_SWIMDIVIDER_2) {
/* SWIM clock is not divided by 2 */
CLK->SWIMCCR |= CLK_SWIMCCR_SWIMDIV;
} else /* CLK_SWIMDivider == CLK_SWIMDIVIDER_2 */
{
/* SWIM clock is divided by 2 */
CLK->SWIMCCR &= (uint8_t) (~CLK_SWIMCCR_SWIMDIV);
}
}
/**
* @brief Enables the Clock Security System.
* @par Full description:
* once CSS is enabled it cannot be disabled until the next reset.
* @param None
* @retval None
*/
inline void CLK_ClockSecuritySystemEnable(void)
{
/* Set CSSEN bit */
CLK->CSSR |= CLK_CSSR_CSSEN;
}
/**
* @brief Returns the clock source used as system clock.
* @param None
* @retval Clock source used.
* can be one of the values of @ref CLK_Source_TypeDef
*/
inline CLK_Source_TypeDef CLK_GetSYSCLKSource(void)
{
return ((CLK_Source_TypeDef) CLK->CMSR);
}
/**
* @brief This function returns the frequencies of different on chip clocks.
* @param None
* @retval the master clock frequency
*/
inline uint32_t CLK_GetClockFreq(void)
{
// static const CONST uint8_t HSIDivFactor[4] = {1, 2, 4, 8}; /*!< Holds the different HSI Divider factors */
uint32_t clockfrequency = 0;
CLK_Source_TypeDef clocksource = CLK_SOURCE_HSI;
uint8_t tmp = 0, presc = 0;
/* Get CLK source. */
clocksource = (CLK_Source_TypeDef) CLK->CMSR;
if (clocksource == CLK_SOURCE_HSI) {
tmp = (uint8_t) (CLK->CKDIVR & CLK_CKDIVR_HSIDIV);
tmp = (uint8_t) (tmp >> 3);
presc = (uint8_t)(1<<tmp);// HSIDivFactor[tmp]; // CHANGED
clockfrequency = HSI_VALUE / presc;
} else if (clocksource == CLK_SOURCE_LSI) {
clockfrequency = LSI_VALUE;
} else {
clockfrequency = HSE_VALUE;
}
return ((uint32_t) clockfrequency);
}
/**
* @brief Adjusts the Internal High Speed oscillator (HSI) calibration value.
* @par Full description:
* @param CLK_HSICalibrationValue calibration trimming value.
* can be one of the values of @ref CLK_HSITrimValue_TypeDef
* @retval None
*/
inline void CLK_AdjustHSICalibrationValue(CLK_HSITrimValue_TypeDef CLK_HSICalibrationValue)
{
/* check the parameters */
assert_param(IS_CLK_HSITRIMVALUE_OK(CLK_HSICalibrationValue));
/* Store the new value */
CLK->HSITRIMR = (uint8_t) ((uint8_t) (CLK->HSITRIMR & (uint8_t) (~CLK_HSITRIMR_HSITRIM)) |
((uint8_t) CLK_HSICalibrationValue));
}
/**
* @brief Reset the SWBSY flag (SWICR Register)
* @par Full description:
* This function reset SWBSY flag in order to reset clock switch operations (target
* oscillator is broken, stabilization is longing too much, etc.). If at the same time \n
* software attempts to set SWEN and clear SWBSY, SWBSY action takes precedence.
* @param None
* @retval None
*/
inline void CLK_SYSCLKEmergencyClear(void)
{
CLK->SWCR &= (uint8_t) (~CLK_SWCR_SWBSY);
}
/**
* @brief Checks whether the specified CLK flag is set or not.
* @par Full description:
* @param CLK_FLAG Flag to check.
* can be one of the values of @ref CLK_Flag_TypeDef
* @retval FlagStatus, status of the checked flag
*/
inline FlagStatus CLK_GetFlagStatus(CLK_Flag_TypeDef CLK_FLAG)
{
uint16_t statusreg = 0;
uint8_t tmpreg = 0;
FlagStatus bitstatus = RESET;
/* check the parameters */
assert_param(IS_CLK_FLAG_OK(CLK_FLAG));
/* Get the CLK register index */
statusreg = (uint16_t) ((uint16_t) CLK_FLAG & (uint16_t) 0xFF00);
if (statusreg == 0x0100) /* The flag to check is in ICKRregister */
{
tmpreg = CLK->ICKR;
} else if (statusreg == 0x0200) /* The flag to check is in ECKRregister */
{
tmpreg = CLK->ECKR;
} else if (statusreg == 0x0300) /* The flag to check is in SWIC register */
{
tmpreg = CLK->SWCR;
} else if (statusreg == 0x0400) /* The flag to check is in CSS register */
{
tmpreg = CLK->CSSR;
} else /* The flag to check is in CCO register */
{
tmpreg = CLK->CCOR;
}
if ((tmpreg & (uint8_t) CLK_FLAG) != (uint8_t) RESET) {
bitstatus = SET;
} else {
bitstatus = RESET;
}
/* Return the flag status */
return ((FlagStatus) bitstatus);
}
/**
* @brief Checks whether the specified CLK interrupt has is enabled or not.
* @param CLK_IT specifies the CLK interrupt.
* can be one of the values of @ref CLK_IT_TypeDef
* @retval ITStatus, new state of CLK_IT (SET or RESET).
*/
inline ITStatus CLK_GetITStatus(CLK_IT_TypeDef CLK_IT)
{
ITStatus bitstatus = RESET;
/* check the parameters */
assert_param(IS_CLK_IT_OK(CLK_IT));
if (CLK_IT == CLK_IT_SWIF) {
/* Check the status of the clock switch interrupt */
if ((CLK->SWCR & (uint8_t) CLK_IT) == (uint8_t) 0x0C) {
bitstatus = SET;
} else {
bitstatus = RESET;
}
} else /* CLK_IT == CLK_IT_CSSDIE */
{
/* Check the status of the security system detection interrupt */
if ((CLK->CSSR & (uint8_t) CLK_IT) == (uint8_t) 0x0C) {
bitstatus = SET;
} else {
bitstatus = RESET;
}
}
/* Return the CLK_IT status */
return bitstatus;
}
/**
* @brief Clears the CLK's interrupt pending bits.
* @param CLK_IT specifies the interrupt pending bits.
* can be one of the values of @ref CLK_IT_TypeDef
* @retval None
*/
inline void CLK_ClearITPendingBit(CLK_IT_TypeDef CLK_IT)
{
/* check the parameters */
assert_param(IS_CLK_IT_OK(CLK_IT));
if (CLK_IT == (uint8_t) CLK_IT_CSSD) {
/* Clear the status of the security system detection interrupt */
CLK->CSSR &= (uint8_t) (~CLK_CSSR_CSSD);
} else /* CLK_PendingBit == (uint8_t)CLK_IT_SWIF */
{
/* Clear the status of the clock switch interrupt */
CLK->SWCR &= (uint8_t) (~CLK_SWCR_SWIF);
}
}
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
/**
* @}
*/
#endif /* __STM8S_CLK_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/