esp32 firmware for a toaster reflow oven WIP!!!!!
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
reflower/main/knob.c

108 lines
2.8 KiB

#include <driver/gpio.h>
#include <freertos/FreeRTOS.h>
#include <freertos/task.h>
#include "knob.h"
#include "gui.h"
const int pushPin = 5;
const int wheelPin1 = 18;
const int wheelPin2 = 23;
#define DEBOUNCE_WHEEL_MS 2
#define DEBOUNCE_BTN_MS 5
static void debounce_service(void *arg);
static TaskHandle_t hDebouncer;
void knob_init() {
printf("Knob init\n");
gpio_config_t cfgPush = {
.pin_bit_mask = (1 << pushPin) | (1 << wheelPin1) | (1 << wheelPin2),
.mode = GPIO_MODE_INPUT,
.pull_up_en = 1
};
gpio_config(&cfgPush);
int rv = xTaskCreate(debounce_service, "debo", 4096, NULL, 6, &hDebouncer);
assert (rv == pdPASS);
}
static void __attribute__((noreturn)) debounce_service(void *arg) {
struct debo {
bool state;
uint32_t start_time;
uint32_t debo_time;
};
struct debo state[3] = {
{.debo_time = pdMS_TO_TICKS(DEBOUNCE_BTN_MS)}, // push
{.debo_time = pdMS_TO_TICKS(DEBOUNCE_WHEEL_MS), .state=1}, // wheel input 1
{.debo_time = pdMS_TO_TICKS(DEBOUNCE_WHEEL_MS), .state=1} // wheel input 2
};
while (1) {
vTaskDelay(pdMS_TO_TICKS(1));
uint32_t now = xTaskGetTickCount();
const uint32_t inputs = gpio_input_get();
bool input[3] = {
(inputs & (1 << pushPin)) == 0,
(inputs & (1 << wheelPin1)) != 0,
(inputs & (1 << wheelPin2)) != 0,
};
enum change {
CHG_NONE = 2,
CHG_SET = 1,
CHG_CLEAR = 0,
};
enum change changes[3] = {CHG_NONE, CHG_NONE, CHG_NONE};
for (int i=0; i<3;i++) {
if (input[i] == !state[i].state) {
// Change detected
if (state[i].start_time == 0) {
// start counting
state[i].start_time = now;
}
if ((state[i].start_time != 0) && (now - state[i].start_time > state[i].debo_time)) {
state[i].state = !state[i].state;
changes[i] = state[i].state ? CHG_SET : CHG_CLEAR;
}
}
else {
// returned back to original, reset counter
state[i].start_time = 0;
}
}
uint32_t signal = 0;
// Wheel logic
if (changes[1] == CHG_SET) {
if (state[2].state) {
signal |= 0b01;
}
else {
signal |= 0b10;
}
}
// knob
if (changes[0] != CHG_NONE) {
signal |= 0b100 << changes[0];
}
// send event to GUI
if (signal != 0) {
BaseType_t higherWoken = 0;
xTaskNotifyFromISR(hGuiThread, signal, eSetBits, &higherWoken);
if (higherWoken) portYIELD_FROM_ISR();
}
}
}