electro
/
f105-motor-demo_stm32
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
STM32 firmware for a remotely-controlled stepper motor demo with a mobile interface.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
5 Commits
1 Branch
0 Tags
399 KiB
 
 
 
 
 
Tag: Branch: Tree: 5e8886579f
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '5e8886579f'
${ noResults }
f105-motor-demo_stm32/project/dspin.h

925 lines
34 KiB
Raw Blame History

/**
******************************************************************************
* @file dspin.h
* @author IPC Rennes
* @version V2.0
* @date October 4, 2013
* @brief Header for dspin.c module
* @note (C) COPYRIGHT 2013 STMicroelectronics
******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __DSPIN_H
#define __DSPIN_H
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
#include "dspin_config.h"
/* Exported constants --------------------------------------------------------*/
/* Select one of the following two evalboard options, comment the other one --*/
/* #define STEVAL_PCC009V2 */
/* #define STM32_VL_Discovery */
/* #define ST_DSPIN_6470H_DISCOVERY*/
/** @defgroup dSPIN FW library interface
*
* {
*/
#define FALSE (0)
#define TRUE (1)
#ifdef STEVAL_PCC009V2
#define dSPIN_SPI SPI2
#define dSPIN_SCK_Pin GPIO_Pin_13
#define dSPIN_SCK_Port GPIOB
#define dSPIN_MOSI_Pin GPIO_Pin_15
#define dSPIN_MOSI_Port GPIOB
#define dSPIN_MISO_Pin GPIO_Pin_14
#define dSPIN_MISO_Port GPIOB
#define dSPIN_nSS_Pin GPIO_Pin_12
#define dSPIN_nSS_Port GPIOB
#define dSPIN_BUSY_Pin GPIO_Pin_10
#define dSPIN_BUSY_Port GPIOB
#define dSPIN_FLAG_Pin GPIO_Pin_11
#define dSPIN_FLAG_Port GPIOB
#define dSPIN_PWM1_Pin GPIO_Pin_0
#define dSPIN_PWM1_Port GPIOB
#define dSPIN_PWM2_Pin GPIO_Pin_1
#define dSPIN_PWM2_Port GPIOB
#define POWER_LED_Pin GPIO_Pin_4
#define POWER_LED_Port GPIOC
#define STATUS_LED_Pin GPIO_Pin_8
#define STATUS_LED_Port GPIOC
#define dSPIN_STBY_RESET_Pin GPIO_Pin_1
#define dSPIN_STBY_RESET_Port GPIOB
#define TIM_PWM TIM3
/* List all the peripherals, which CLKs have to be enabled! */
#define dSPIN_PERIPHERAL_CLKs_APB1 (RCC_APB1Periph_SPI2|RCC_APB1Periph_TIM3)
#define dSPIN_PERIPHERAL_CLKs_APB2 (RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC | RCC_APB2Periph_AFIO)
/* Note : RCC_APB2Periph_AFIO is mandatory for interrupt enabling */
#endif
/* dSPIN maximum number of bytes of command and arguments to set a parameter */
#define dSPIN_CMD_ARG_MAX_NB_BYTES (4)
/* dSPIN command + argument bytes number */
#define dSPIN_CMD_ARG_NB_BYTES_NOP (1)
#define dSPIN_CMD_ARG_NB_BYTES_RUN (4)
#define dSPIN_CMD_ARG_NB_BYTES_STEP_CLOCK (1)
#define dSPIN_CMD_ARG_NB_BYTES_MOVE (4)
#define dSPIN_CMD_ARG_NB_BYTES_GO_TO (4)
#define dSPIN_CMD_ARG_NB_BYTES_GO_TO_DIR (4)
#define dSPIN_CMD_ARG_NB_BYTES_GO_UNTIL (4)
#define dSPIN_CMD_ARG_NB_BYTES_RELEASE_SW (1)
#define dSPIN_CMD_ARG_NB_BYTES_GO_HOME (1)
#define dSPIN_CMD_ARG_NB_BYTES_GO_MARK (1)
#define dSPIN_CMD_ARG_NB_BYTES_RESET_POS (1)
#define dSPIN_CMD_ARG_NB_BYTES_RESET_DEVICE (1)
#define dSPIN_CMD_ARG_NB_BYTES_SOFT_STOP (1)
#define dSPIN_CMD_ARG_NB_BYTES_HARD_STOP (1)
#define dSPIN_CMD_ARG_NB_BYTES_SOFT_HIZ (1)
#define dSPIN_CMD_ARG_NB_BYTES_HARD_HIZ (1)
#define dSPIN_CMD_ARG_NB_BYTES_GET_STATUS (1)
/* dSPIN response bytes number */
#define dSPIN_RSP_NB_BYTES_GET_STATUS (2)
/* Daisy chain command mask */
#define DAISY_CHAIN_COMMAND_MASK (0xFA)
/** dSPIN signals - Used for connection with STM32 discovery kit
* If another control board is used, please change the following settings
* according to the application board wiring diagram.
* Do not touch if STEVAL-PCC009V2 is used, see defs below for that evalboard.
*
*/
#ifdef STM32_VL_Discovery
#define dSPIN_SPI SPI1
#define dSPIN_SCK_Pin GPIO_Pin_5
#define dSPIN_SCK_Port GPIOA
#define dSPIN_MOSI_Pin GPIO_Pin_7
#define dSPIN_MOSI_Port GPIOA
#define dSPIN_MISO_Pin GPIO_Pin_6
#define dSPIN_MISO_Port GPIOA
#define dSPIN_nSS_Pin GPIO_Pin_4
#define dSPIN_nSS_Port GPIOA
#define dSPIN_BUSY_Pin GPIO_Pin_4
#define dSPIN_BUSY_Port GPIOC
#define dSPIN_FLAG_Pin GPIO_Pin_5
#define dSPIN_FLAG_Port GPIOC
#define dSPIN_PWM1_Pin GPIO_Pin_1
#define dSPIN_PWM1_Port GPIOA
#define dSPIN_PWM2_Pin GPIO_Pin_0
#define dSPIN_PWM2_Port GPIOB
/* List all the peripherals, which CLKs have to be enabled! */
#define dSPIN_PERIPHERAL_CLKs_APB1 (0x00)
#define dSPIN_PERIPHERAL_CLKs_APB2 (RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC | RCC_APB2Periph_SPI1)
#endif
/** dSPIN signals - Used for connection with ST_DSPIN_6470H_DISCOVERY
*/
#ifdef ST_DSPIN_6470H_DISCOVERY
#define dSPIN_SPI SPI1
#define dSPIN_SCK_Pin GPIO_Pin_5
#define dSPIN_SCK_Port GPIOA
#define dSPIN_MOSI_Pin GPIO_Pin_7
#define dSPIN_MOSI_Port GPIOA
#define dSPIN_MISO_Pin GPIO_Pin_6
#define dSPIN_MISO_Port GPIOA
#define dSPIN_nSS_Pin GPIO_Pin_4
#define dSPIN_nSS_Port GPIOA
#define dSPIN_BUSY_Pin GPIO_Pin_11
#define dSPIN_BUSY_Port GPIOB
#define dSPIN_FLAG_Pin GPIO_Pin_10
#define dSPIN_FLAG_Port GPIOB
/* LED_READY, GREEN*/
#define POWER_LED_Pin GPIO_Pin_3
#define POWER_LED_Port GPIOC
/* LED_BUSY, ORANGE */
#define LED_BUSY_Pin GPIO_Pin_2
#define LED_BUSY_Port GPIOC
/* LED_ERROR, RED */
#define STATUS_LED_Pin GPIO_Pin_1
#define STATUS_LED_Port GPIOC
/* LED_SPARE, YELLOW */
#define LED_SPARE_Pin GPIO_Pin_0
#define LED_SPARE_Port GPIOC
#define dSPIN_PWM1_Pin GPIO_Pin_3
#define dSPIN_PWM1_Port GPIOA
#define SW_MOTOR_Pin GPIO_Pin_0
#define SW_MOTOR_Port GPIOA
#define dSPIN_SW_Pin GPIO_Pin_4
#define dSPIN_SW_Port GPIOC
#define BUTTON_A_Pin GPIO_Pin_1
#define BUTTON_A_Port GPIOA
#define BUTTON_B_Pin GPIO_Pin_2
#define BUTTON_B_Port GPIOA
#define dSPIN_STBY_RESET_Pin GPIO_Pin_5
#define dSPIN_STBY_RESET_Port GPIOC
#define TIM_PWM TIM5
/* List all the peripherals, which CLKs have to be enabled! */
/* Note : RCC_APB2Periph_AFIO is mandatory for interrupt enabling */
#define dSPIN_PERIPHERAL_CLKs_APB1 (RCC_APB1Periph_TIM5)
#define dSPIN_PERIPHERAL_CLKs_APB2 (RCC_APB2Periph_SPI1 | \
RCC_APB2Periph_GPIOA | \
RCC_APB2Periph_GPIOB | \
RCC_APB2Periph_GPIOC | \
RCC_APB2Periph_AFIO)
#endif
/** dSPIN parameter min and max values
*/
#define dSPIN_CONF_PARAM_STALL_TH_MA_MAX ((uint16_t)(4000)) /* current in mA */
/** Register bits / masks
*/
/* dSPIN electrical position register masks */
#define dSPIN_ELPOS_STEP_MASK ((uint8_t)0xC0)
#define dSPIN_ELPOS_MICROSTEP_MASK ((uint8_t)0x3F)
/* dSPIN min speed register bit / mask */
#define dSPIN_LSPD_OPT ((uint16_t)0x1000)
#define dSPIN_MIN_SPEED_MASK ((uint16_t)0x0FFF)
/* dSPIN Sync Output frequency enabling bit */
#define dSPIN_SYNC_EN 0x80
#if defined(L6472)
/* dSPIN step mode bit3 must be 1 */
#define dSPIN_STEP_MODE_BIT3 0x08
#endif /* defined(L6472) */
/* Exported types ------------------------------------------------------------*/
#if defined(L6470)
/**
* @brief dSPIN Init structure definition
*/
typedef struct {
uint32_t ABS_POS;
uint16_t EL_POS;
uint32_t MARK;
uint32_t SPEED;
uint16_t ACC;
uint16_t DEC;
uint16_t MAX_SPEED;
uint16_t MIN_SPEED;
uint16_t FS_SPD;
uint8_t KVAL_HOLD;
uint8_t KVAL_RUN;
uint8_t KVAL_ACC;
uint8_t KVAL_DEC;
uint16_t INT_SPD;
uint8_t ST_SLP;
uint8_t FN_SLP_ACC;
uint8_t FN_SLP_DEC;
uint8_t K_THERM;
uint8_t ADC_OUT;
uint8_t OCD_TH;
uint8_t STALL_TH;
uint8_t STEP_MODE;
uint8_t ALARM_EN;
uint16_t CONFIG;
uint16_t STATUS;
} dSPIN_RegsStruct_TypeDef;
/* dSPIN Low speed optimization */
typedef enum {
dSPIN_LSPD_OPT_OFF = ((uint16_t)0x0000),
dSPIN_LSPD_OPT_ON = ((uint16_t)dSPIN_LSPD_OPT)
} dSPIN_LSPD_OPT_TypeDef;
/* dSPIN overcurrent threshold options */
typedef enum {
dSPIN_OCD_TH_375mA = ((uint8_t)0x00),
dSPIN_OCD_TH_750mA = ((uint8_t)0x01),
dSPIN_OCD_TH_1125mA = ((uint8_t)0x02),
dSPIN_OCD_TH_1500mA = ((uint8_t)0x03),
dSPIN_OCD_TH_1875mA = ((uint8_t)0x04),
dSPIN_OCD_TH_2250mA = ((uint8_t)0x05),
dSPIN_OCD_TH_2625mA = ((uint8_t)0x06),
dSPIN_OCD_TH_3000mA = ((uint8_t)0x07),
dSPIN_OCD_TH_3375mA = ((uint8_t)0x08),
dSPIN_OCD_TH_3750mA = ((uint8_t)0x09),
dSPIN_OCD_TH_4125mA = ((uint8_t)0x0A),
dSPIN_OCD_TH_4500mA = ((uint8_t)0x0B),
dSPIN_OCD_TH_4875mA = ((uint8_t)0x0C),
dSPIN_OCD_TH_5250mA = ((uint8_t)0x0D),
dSPIN_OCD_TH_5625mA = ((uint8_t)0x0E),
dSPIN_OCD_TH_6000mA = ((uint8_t)0x0F)
} dSPIN_OCD_TH_TypeDef;
/* dSPIN STEP_MODE register masks */
typedef enum {
dSPIN_STEP_MODE_STEP_SEL = ((uint8_t)0x07),
dSPIN_STEP_MODE_SYNC_SEL = ((uint8_t)0x70),
dSPIN_STEP_MODE_SYNC_EN = ((uint8_t)0x80)
} dSPIN_STEP_MODE_Masks_TypeDef;
/* dSPIN STEP_MODE register options */
/* dSPIN STEP_SEL options */
typedef enum {
dSPIN_STEP_SEL_1 = ((uint8_t)0x00),
dSPIN_STEP_SEL_1_2 = ((uint8_t)0x01),
dSPIN_STEP_SEL_1_4 = ((uint8_t)0x02),
dSPIN_STEP_SEL_1_8 = ((uint8_t)0x03),
dSPIN_STEP_SEL_1_16 = ((uint8_t)0x04),
dSPIN_STEP_SEL_1_32 = ((uint8_t)0x05),
dSPIN_STEP_SEL_1_64 = ((uint8_t)0x06),
dSPIN_STEP_SEL_1_128 = ((uint8_t)0x07)
} dSPIN_STEP_SEL_TypeDef;
/* dSPIN SYNC_SEL options */
typedef enum {
dSPIN_SYNC_SEL_DISABLED = ((uint8_t)0x00),
dSPIN_SYNC_SEL_1_2 = ((uint8_t)(dSPIN_SYNC_EN | 0x00)),
dSPIN_SYNC_SEL_1 = ((uint8_t)(dSPIN_SYNC_EN | 0x10)),
dSPIN_SYNC_SEL_2 = ((uint8_t)(dSPIN_SYNC_EN | 0x20)),
dSPIN_SYNC_SEL_4 = ((uint8_t)(dSPIN_SYNC_EN | 0x30)),
dSPIN_SYNC_SEL_8 = ((uint8_t)(dSPIN_SYNC_EN | 0x40)),
dSPIN_SYNC_SEL_16 = ((uint8_t)(dSPIN_SYNC_EN | 0x50)),
dSPIN_SYNC_SEL_32 = ((uint8_t)(dSPIN_SYNC_EN | 0x60)),
dSPIN_SYNC_SEL_64 = ((uint8_t)(dSPIN_SYNC_EN | 0x70))
} dSPIN_SYNC_SEL_TypeDef;
/* dSPIN ALARM_EN register options */
typedef enum {
dSPIN_ALARM_EN_OVERCURRENT = ((uint8_t)0x01),
dSPIN_ALARM_EN_THERMAL_SHUTDOWN = ((uint8_t)0x02),
dSPIN_ALARM_EN_THERMAL_WARNING = ((uint8_t)0x04),
dSPIN_ALARM_EN_UNDER_VOLTAGE = ((uint8_t)0x08),
dSPIN_ALARM_EN_STALL_DET_A = ((uint8_t)0x10),
dSPIN_ALARM_EN_STALL_DET_B = ((uint8_t)0x20),
dSPIN_ALARM_EN_SW_TURN_ON = ((uint8_t)0x40),
dSPIN_ALARM_EN_WRONG_NPERF_CMD = ((uint8_t)0x80)
} dSPIN_ALARM_EN_TypeDef;
/* dSPIN Config register masks */
typedef enum {
dSPIN_CONFIG_OSC_SEL = ((uint16_t)0x0007),
dSPIN_CONFIG_EXT_CLK = ((uint16_t)0x0008),
dSPIN_CONFIG_SW_MODE = ((uint16_t)0x0010),
dSPIN_CONFIG_EN_VSCOMP = ((uint16_t)0x0020),
dSPIN_CONFIG_OC_SD = ((uint16_t)0x0080),
dSPIN_CONFIG_POW_SR = ((uint16_t)0x0300),
dSPIN_CONFIG_F_PWM_DEC = ((uint16_t)0x1C00),
dSPIN_CONFIG_F_PWM_INT = ((uint16_t)0xE000)
} dSPIN_CONFIG_Masks_TypeDef;
/* dSPIN Config register options */
typedef enum {
dSPIN_CONFIG_INT_16MHZ = ((uint16_t)0x0000),
dSPIN_CONFIG_INT_16MHZ_OSCOUT_2MHZ = ((uint16_t)0x0008),
dSPIN_CONFIG_INT_16MHZ_OSCOUT_4MHZ = ((uint16_t)0x0009),
dSPIN_CONFIG_INT_16MHZ_OSCOUT_8MHZ = ((uint16_t)0x000A),
dSPIN_CONFIG_INT_16MHZ_OSCOUT_16MHZ = ((uint16_t)0x000B),
dSPIN_CONFIG_EXT_8MHZ_XTAL_DRIVE = ((uint16_t)0x0004),
dSPIN_CONFIG_EXT_16MHZ_XTAL_DRIVE = ((uint16_t)0x0005),
dSPIN_CONFIG_EXT_24MHZ_XTAL_DRIVE = ((uint16_t)0x0006),
dSPIN_CONFIG_EXT_32MHZ_XTAL_DRIVE = ((uint16_t)0x0007),
dSPIN_CONFIG_EXT_8MHZ_OSCOUT_INVERT = ((uint16_t)0x000C),
dSPIN_CONFIG_EXT_16MHZ_OSCOUT_INVERT = ((uint16_t)0x000D),
dSPIN_CONFIG_EXT_24MHZ_OSCOUT_INVERT = ((uint16_t)0x000E),
dSPIN_CONFIG_EXT_32MHZ_OSCOUT_INVERT = ((uint16_t)0x000F)
} dSPIN_CONFIG_OSC_MGMT_TypeDef;
typedef enum {
dSPIN_CONFIG_SW_HARD_STOP = ((uint16_t)0x0000),
dSPIN_CONFIG_SW_USER = ((uint16_t)0x0010)
} dSPIN_CONFIG_SW_MODE_TypeDef;
typedef enum {
dSPIN_CONFIG_VS_COMP_DISABLE = ((uint16_t)0x0000),
dSPIN_CONFIG_VS_COMP_ENABLE = ((uint16_t)0x0020)
} dSPIN_CONFIG_EN_VSCOMP_TypeDef;
typedef enum {
dSPIN_CONFIG_OC_SD_DISABLE = ((uint16_t)0x0000),
dSPIN_CONFIG_OC_SD_ENABLE = ((uint16_t)0x0080)
} dSPIN_CONFIG_OC_SD_TypeDef;
typedef enum {
dSPIN_CONFIG_SR_320V_us = ((uint16_t)0x0000),
dSPIN_CONFIG_SR_075V_us = ((uint16_t)0x0100),
dSPIN_CONFIG_SR_110V_us = ((uint16_t)0x0200),
dSPIN_CONFIG_SR_260V_us = ((uint16_t)0x0300)
} dSPIN_CONFIG_POW_SR_TypeDef;
typedef enum {
dSPIN_CONFIG_PWM_DIV_1 = (((uint16_t)0x00) << 13),
dSPIN_CONFIG_PWM_DIV_2 = (((uint16_t)0x01) << 13),
dSPIN_CONFIG_PWM_DIV_3 = (((uint16_t)0x02) << 13),
dSPIN_CONFIG_PWM_DIV_4 = (((uint16_t)0x03) << 13),
dSPIN_CONFIG_PWM_DIV_5 = (((uint16_t)0x04) << 13),
dSPIN_CONFIG_PWM_DIV_6 = (((uint16_t)0x05) << 13),
dSPIN_CONFIG_PWM_DIV_7 = (((uint16_t)0x06) << 13)
} dSPIN_CONFIG_F_PWM_INT_TypeDef;
typedef enum {
dSPIN_CONFIG_PWM_MUL_0_625 = (((uint16_t)0x00) << 10),
dSPIN_CONFIG_PWM_MUL_0_75 = (((uint16_t)0x01) << 10),
dSPIN_CONFIG_PWM_MUL_0_875 = (((uint16_t)0x02) << 10),
dSPIN_CONFIG_PWM_MUL_1 = (((uint16_t)0x03) << 10),
dSPIN_CONFIG_PWM_MUL_1_25 = (((uint16_t)0x04) << 10),
dSPIN_CONFIG_PWM_MUL_1_5 = (((uint16_t)0x05) << 10),
dSPIN_CONFIG_PWM_MUL_1_75 = (((uint16_t)0x06) << 10),
dSPIN_CONFIG_PWM_MUL_2 = (((uint16_t)0x07) << 10)
} dSPIN_CONFIG_F_PWM_DEC_TypeDef;
/* Status Register bit masks */
typedef enum {
dSPIN_STATUS_HIZ = (((uint16_t)0x0001)),
dSPIN_STATUS_BUSY = (((uint16_t)0x0002)),
dSPIN_STATUS_SW_F = (((uint16_t)0x0004)),
dSPIN_STATUS_SW_EVN = (((uint16_t)0x0008)),
dSPIN_STATUS_DIR = (((uint16_t)0x0010)),
dSPIN_STATUS_MOT_STATUS = (((uint16_t)0x0060)),
dSPIN_STATUS_NOTPERF_CMD = (((uint16_t)0x0080)),
dSPIN_STATUS_WRONG_CMD = (((uint16_t)0x0100)),
dSPIN_STATUS_UVLO = (((uint16_t)0x0200)),
dSPIN_STATUS_TH_WRN = (((uint16_t)0x0400)),
dSPIN_STATUS_TH_SD = (((uint16_t)0x0800)),
dSPIN_STATUS_OCD = (((uint16_t)0x1000)),
dSPIN_STATUS_STEP_LOSS_A = (((uint16_t)0x2000)),
dSPIN_STATUS_STEP_LOSS_B = (((uint16_t)0x4000)),
dSPIN_STATUS_SCK_MOD = (((uint16_t)0x8000))
} dSPIN_STATUS_Masks_TypeDef;
/* Status Register options */
typedef enum {
dSPIN_STATUS_MOT_STATUS_STOPPED = (((uint16_t)0x0000) << 5),
dSPIN_STATUS_MOT_STATUS_ACCELERATION = (((uint16_t)0x0001) << 5),
dSPIN_STATUS_MOT_STATUS_DECELERATION = (((uint16_t)0x0002) << 5),
dSPIN_STATUS_MOT_STATUS_CONST_SPD = (((uint16_t)0x0003) << 5)
} dSPIN_STATUS_TypeDef;
/* dSPIN internal register addresses */
typedef enum {
dSPIN_ABS_POS = ((uint8_t)0x01),
dSPIN_EL_POS = ((uint8_t)0x02),
dSPIN_MARK = ((uint8_t)0x03),
dSPIN_SPEED = ((uint8_t)0x04),
dSPIN_ACC = ((uint8_t)0x05),
dSPIN_DEC = ((uint8_t)0x06),
dSPIN_MAX_SPEED = ((uint8_t)0x07),
dSPIN_MIN_SPEED = ((uint8_t)0x08),
dSPIN_FS_SPD = ((uint8_t)0x15),
dSPIN_KVAL_HOLD = ((uint8_t)0x09),
dSPIN_KVAL_RUN = ((uint8_t)0x0A),
dSPIN_KVAL_ACC = ((uint8_t)0x0B),
dSPIN_KVAL_DEC = ((uint8_t)0x0C),
dSPIN_INT_SPD = ((uint8_t)0x0D),
dSPIN_ST_SLP = ((uint8_t)0x0E),
dSPIN_FN_SLP_ACC = ((uint8_t)0x0F),
dSPIN_FN_SLP_DEC = ((uint8_t)0x10),
dSPIN_K_THERM = ((uint8_t)0x11),
dSPIN_ADC_OUT = ((uint8_t)0x12),
dSPIN_OCD_TH = ((uint8_t)0x13),
dSPIN_STALL_TH = ((uint8_t)0x14),
dSPIN_STEP_MODE = ((uint8_t)0x16),
dSPIN_ALARM_EN = ((uint8_t)0x17),
dSPIN_CONFIG = ((uint8_t)0x18),
dSPIN_STATUS = ((uint8_t)0x19),
dSPIN_RESERVED_REG2 = ((uint8_t)0x1A),
dSPIN_RESERVED_REG1 = ((uint8_t)0x1B)
} dSPIN_Registers_TypeDef;
/* dSPIN command set */
typedef enum {
dSPIN_NOP = ((uint8_t)0x00),
dSPIN_SET_PARAM = ((uint8_t)0x00),
dSPIN_GET_PARAM = ((uint8_t)0x20),
dSPIN_RUN = ((uint8_t)0x50),
dSPIN_STEP_CLOCK = ((uint8_t)0x58),
dSPIN_MOVE = ((uint8_t)0x40),
dSPIN_GO_TO = ((uint8_t)0x60),
dSPIN_GO_TO_DIR = ((uint8_t)0x68),
dSPIN_GO_UNTIL = ((uint8_t)0x82),
dSPIN_GO_UNTIL_ACT_CPY = ((uint8_t)0x8A),
dSPIN_RELEASE_SW = ((uint8_t)0x92),
dSPIN_GO_HOME = ((uint8_t)0x70),
dSPIN_GO_MARK = ((uint8_t)0x78),
dSPIN_RESET_POS = ((uint8_t)0xD8),
dSPIN_RESET_DEVICE = ((uint8_t)0xC0),
dSPIN_SOFT_STOP = ((uint8_t)0xB0),
dSPIN_HARD_STOP = ((uint8_t)0xB8),
dSPIN_SOFT_HIZ = ((uint8_t)0xA0),
dSPIN_HARD_HIZ = ((uint8_t)0xA8),
dSPIN_GET_STATUS = ((uint8_t)0xD0),
dSPIN_RESERVED_CMD2 = ((uint8_t)0xEB),
dSPIN_RESERVED_CMD1 = ((uint8_t)0xF8)
} dSPIN_Commands_TypeDef;
/* dSPIN direction options */
typedef enum {
FWD = ((uint8_t)0x01),
REV = ((uint8_t)0x00)
} dSPIN_Direction_TypeDef;
/* dSPIN action options */
typedef enum {
ACTION_RESET = ((uint8_t)0x00),
ACTION_COPY = ((uint8_t)0x08)
} dSPIN_Action_TypeDef;
/**
* @}
*/
#endif /* defined(L6470) */
#if defined(L6472)
/**
* @brief dSPIN Init structure definition
*/
typedef struct {
uint32_t ABS_POS;
uint16_t EL_POS;
uint32_t MARK;
uint32_t SPEED;
uint16_t ACC;
uint16_t DEC;
uint16_t MAX_SPEED;
uint16_t MIN_SPEED;
uint16_t FS_SPD;
uint8_t TVAL_HOLD;
uint8_t TVAL_RUN;
uint8_t TVAL_ACC;
uint8_t TVAL_DEC;
uint16_t RESERVED_3;
uint8_t T_FAST;
uint8_t TON_MIN;
uint8_t TOFF_MIN;
uint8_t RESERVED_2;
uint8_t ADC_OUT;
uint8_t OCD_TH;
uint8_t RESERVED_1;
uint8_t STEP_MODE;
uint8_t ALARM_EN;
uint16_t CONFIG;
} dSPIN_RegsStruct_TypeDef;
/* dSPIN maximum fall step times */
typedef enum {
dSPIN_FAST_STEP_2us = ((uint8_t)0x00),
dSPIN_FAST_STEP_4us = ((uint8_t)0x01),
dSPIN_FAST_STEP_6us = ((uint8_t)0x02),
dSPIN_FAST_STEP_8us = ((uint8_t)0x03),
dSPIN_FAST_STEP_10us = ((uint8_t)0x04),
dSPIN_FAST_STEP_12us = ((uint8_t)0x05),
dSPIN_FAST_STEP_14us = ((uint8_t)0x06),
dSPIN_FAST_STEP_16us = ((uint8_t)0x07),
dSPIN_FAST_STEP_18us = ((uint8_t)0x08),
dSPIN_FAST_STEP_20us = ((uint8_t)0x09),
dSPIN_FAST_STEP_22us = ((uint8_t)0x0A),
dSPIN_FAST_STEP_24s = ((uint8_t)0x0B),
dSPIN_FAST_STEP_26us = ((uint8_t)0x0C),
dSPIN_FAST_STEP_28us = ((uint8_t)0x0D),
dSPIN_FAST_STEP_30us = ((uint8_t)0x0E),
dSPIN_FAST_STEP_32us = ((uint8_t)0x0F)
} dSPIN_FAST_STEP_TypeDef;
/* dSPIN maximum fast decay times */
typedef enum {
dSPIN_TOFF_FAST_2us = (((uint8_t)0x00) << 4),
dSPIN_TOFF_FAST_4us = (((uint8_t)0x01) << 4),
dSPIN_TOFF_FAST_6us = (((uint8_t)0x02) << 4),
dSPIN_TOFF_FAST_8us = (((uint8_t)0x03) << 4),
dSPIN_TOFF_FAST_10us = (((uint8_t)0x04) << 4),
dSPIN_TOFF_FAST_12us = (((uint8_t)0x05) << 4),
dSPIN_TOFF_FAST_14us = (((uint8_t)0x06) << 4),
dSPIN_TOFF_FAST_16us = (((uint8_t)0x07) << 4),
dSPIN_TOFF_FAST_18us = (((uint8_t)0x08) << 4),
dSPIN_TOFF_FAST_20us = (((uint8_t)0x09) << 4),
dSPIN_TOFF_FAST_22us = (((uint8_t)0x0A) << 4),
dSPIN_TOFF_FAST_24us = (((uint8_t)0x0B) << 4),
dSPIN_TOFF_FAST_26us = (((uint8_t)0x0C) << 4),
dSPIN_TOFF_FAST_28us = (((uint8_t)0x0D) << 4),
dSPIN_TOFF_FAST_30us = (((uint8_t)0x0E) << 4),
dSPIN_TOFF_FAST_32us = (((uint8_t)0x0F) << 4)
} dSPIN_TOFF_FAST_TypeDef;
/* dSPIN overcurrent threshold options */
typedef enum {
dSPIN_OCD_TH_375mA = ((uint8_t)0x00),
dSPIN_OCD_TH_750mA = ((uint8_t)0x01),
dSPIN_OCD_TH_1125mA = ((uint8_t)0x02),
dSPIN_OCD_TH_1500mA = ((uint8_t)0x03),
dSPIN_OCD_TH_1875mA = ((uint8_t)0x04),
dSPIN_OCD_TH_2250mA = ((uint8_t)0x05),
dSPIN_OCD_TH_2625mA = ((uint8_t)0x06),
dSPIN_OCD_TH_3000mA = ((uint8_t)0x07),
dSPIN_OCD_TH_3375mA = ((uint8_t)0x08),
dSPIN_OCD_TH_3750mA = ((uint8_t)0x09),
dSPIN_OCD_TH_4125mA = ((uint8_t)0x0A),
dSPIN_OCD_TH_4500mA = ((uint8_t)0x0B),
dSPIN_OCD_TH_4875mA = ((uint8_t)0x0C),
dSPIN_OCD_TH_5250mA = ((uint8_t)0x0D),
dSPIN_OCD_TH_5625mA = ((uint8_t)0x0E),
dSPIN_OCD_TH_6000mA = ((uint8_t)0x0F)
} dSPIN_OCD_TH_TypeDef;
/* dSPIN STEP_MODE register masks */
typedef enum {
dSPIN_STEP_MODE_STEP_SEL = ((uint8_t)0x07),
dSPIN_STEP_MODE_SYNC_SEL = ((uint8_t)0x70),
dSPIN_STEP_MODE_SYNC_EN = ((uint8_t)0x80)
} dSPIN_STEP_MODE_Masks_TypeDef;
/* dSPIN STEP_MODE register options */
/* dSPIN STEP_SEL options */
typedef enum {
dSPIN_STEP_SEL_1 = ((uint8_t)(dSPIN_STEP_MODE_BIT3 | 0x00)),
dSPIN_STEP_SEL_1_2 = ((uint8_t)(dSPIN_STEP_MODE_BIT3 | 0x01)),
dSPIN_STEP_SEL_1_4 = ((uint8_t)(dSPIN_STEP_MODE_BIT3 | 0x02)),
dSPIN_STEP_SEL_1_8 = ((uint8_t)(dSPIN_STEP_MODE_BIT3 | 0x03)),
dSPIN_STEP_SEL_1_16 = ((uint8_t)(dSPIN_STEP_MODE_BIT3 | 0x04))
} dSPIN_STEP_SEL_TypeDef;
/* dSPIN SYNC_SEL options */
typedef enum {
dSPIN_SYNC_SEL_DISABLED = ((uint8_t)0x00),
dSPIN_SYNC_SEL_1_2 = ((uint8_t)(dSPIN_SYNC_EN | 0x00)),
dSPIN_SYNC_SEL_1 = ((uint8_t)(dSPIN_SYNC_EN | 0x10)),
dSPIN_SYNC_SEL_2 = ((uint8_t)(dSPIN_SYNC_EN | 0x20)),
dSPIN_SYNC_SEL_4 = ((uint8_t)(dSPIN_SYNC_EN | 0x30)),
dSPIN_SYNC_SEL_8 = ((uint8_t)(dSPIN_SYNC_EN | 0x40))
} dSPIN_SYNC_SEL_TypeDef;
/* dSPIN ALARM_EN register options */
typedef enum {
dSPIN_ALARM_EN_OVERCURRENT = ((uint8_t)0x01),
dSPIN_ALARM_EN_THERMAL_SHUTDOWN = ((uint8_t)0x02),
dSPIN_ALARM_EN_THERMAL_WARNING = ((uint8_t)0x04),
dSPIN_ALARM_EN_UNDER_VOLTAGE = ((uint8_t)0x08),
dSPIN_ALARM_EN_SW_TURN_ON = ((uint8_t)0x40),
dSPIN_ALARM_EN_WRONG_NPERF_CMD = ((uint8_t)0x80)
} dSPIN_ALARM_EN_TypeDef;
/* dSPIN Config register masks */
typedef enum {
dSPIN_CONFIG_OSC_SEL = ((uint16_t)0x0007),
dSPIN_CONFIG_EXT_CLK = ((uint16_t)0x0008),
dSPIN_CONFIG_SW_MODE = ((uint16_t)0x0010),
dSPIN_CONFIG_EN_VSCOMP = ((uint16_t)0x0020),
dSPIN_CONFIG_OC_SD = ((uint16_t)0x0080),
dSPIN_CONFIG_POW_SR = ((uint16_t)0x0300),
dSPIN_CONFIG_TSW = ((uint16_t)0x7C00),
dSPIN_CONFIG_PRED_EN = ((uint16_t)0x8000)
} dSPIN_CONFIG_Masks_TypeDef;
/* dSPIN Config register options */
typedef enum {
dSPIN_CONFIG_INT_16MHZ = ((uint16_t)0x0000),
dSPIN_CONFIG_INT_16MHZ_OSCOUT_2MHZ = ((uint16_t)0x0008),
dSPIN_CONFIG_INT_16MHZ_OSCOUT_4MHZ = ((uint16_t)0x0009),
dSPIN_CONFIG_INT_16MHZ_OSCOUT_8MHZ = ((uint16_t)0x000A),
dSPIN_CONFIG_INT_16MHZ_OSCOUT_16MHZ = ((uint16_t)0x000B),
dSPIN_CONFIG_EXT_8MHZ_XTAL_DRIVE = ((uint16_t)0x0004),
dSPIN_CONFIG_EXT_16MHZ_XTAL_DRIVE = ((uint16_t)0x0005),
dSPIN_CONFIG_EXT_24MHZ_XTAL_DRIVE = ((uint16_t)0x0006),
dSPIN_CONFIG_EXT_32MHZ_XTAL_DRIVE = ((uint16_t)0x0007),
dSPIN_CONFIG_EXT_8MHZ_OSCOUT_INVERT = ((uint16_t)0x000C),
dSPIN_CONFIG_EXT_16MHZ_OSCOUT_INVERT = ((uint16_t)0x000D),
dSPIN_CONFIG_EXT_24MHZ_OSCOUT_INVERT = ((uint16_t)0x000E),
dSPIN_CONFIG_EXT_32MHZ_OSCOUT_INVERT = ((uint16_t)0x000F)
} dSPIN_CONFIG_OSC_MGMT_TypeDef;
typedef enum {
dSPIN_CONFIG_SW_HARD_STOP = ((uint16_t)0x0000),
dSPIN_CONFIG_SW_USER = ((uint16_t)0x0010)
} dSPIN_CONFIG_SW_MODE_TypeDef;
typedef enum {
dSPIN_CONFIG_TQ_REG_TVAL_USED = ((uint16_t)0x0000),
dSPIN_CONFIG_TQ_REG_ADC_OUT = ((uint16_t)0x0020)
} dSPIN_CONFIG_EN_TQREG_TypeDef;
typedef enum {
dSPIN_CONFIG_OC_SD_DISABLE = ((uint16_t)0x0000),
dSPIN_CONFIG_OC_SD_ENABLE = ((uint16_t)0x0080)
} dSPIN_CONFIG_OC_SD_TypeDef;
typedef enum {
dSPIN_CONFIG_SR_320V_us = ((uint16_t)0x0000),
dSPIN_CONFIG_SR_075V_us = ((uint16_t)0x0100),
dSPIN_CONFIG_SR_110V_us = ((uint16_t)0x0200),
dSPIN_CONFIG_SR_260V_us = ((uint16_t)0x0300)
} dSPIN_CONFIG_POW_SR_TypeDef;
typedef enum {
dSPIN_CONFIG_PRED_DISABLE = ((uint16_t)0x0000),
dSPIN_CONFIG_PRED_ENABLE = ((uint16_t)0x8000)
} dSPIN_CONFIG_PRED_EN_TypeDef;
typedef enum {
dSPIN_CONFIG_TSW_004us = (((uint16_t)0x01) << 10),
dSPIN_CONFIG_TSW_008us = (((uint16_t)0x02) << 10),
dSPIN_CONFIG_TSW_012us = (((uint16_t)0x03) << 10),
dSPIN_CONFIG_TSW_016us = (((uint16_t)0x04) << 10),
dSPIN_CONFIG_TSW_020us = (((uint16_t)0x05) << 10),
dSPIN_CONFIG_TSW_024us = (((uint16_t)0x06) << 10),
dSPIN_CONFIG_TSW_028us = (((uint16_t)0x07) << 10),
dSPIN_CONFIG_TSW_032us = (((uint16_t)0x08) << 10),
dSPIN_CONFIG_TSW_036us = (((uint16_t)0x09) << 10),
dSPIN_CONFIG_TSW_040us = (((uint16_t)0x0A) << 10),
dSPIN_CONFIG_TSW_044us = (((uint16_t)0x0B) << 10),
dSPIN_CONFIG_TSW_048us = (((uint16_t)0x0C) << 10),
dSPIN_CONFIG_TSW_052us = (((uint16_t)0x0D) << 10),
dSPIN_CONFIG_TSW_056us = (((uint16_t)0x0E) << 10),
dSPIN_CONFIG_TSW_060us = (((uint16_t)0x0F) << 10),
dSPIN_CONFIG_TSW_064us = (((uint16_t)0x10) << 10),
dSPIN_CONFIG_TSW_068us = (((uint16_t)0x11) << 10),
dSPIN_CONFIG_TSW_072us = (((uint16_t)0x12) << 10),
dSPIN_CONFIG_TSW_076us = (((uint16_t)0x13) << 10),
dSPIN_CONFIG_TSW_080us = (((uint16_t)0x14) << 10),
dSPIN_CONFIG_TSW_084us = (((uint16_t)0x15) << 10),
dSPIN_CONFIG_TSW_088us = (((uint16_t)0x16) << 10),
dSPIN_CONFIG_TSW_092us = (((uint16_t)0x17) << 10),
dSPIN_CONFIG_TSW_096us = (((uint16_t)0x18) << 10),
dSPIN_CONFIG_TSW_100us = (((uint16_t)0x19) << 10),
dSPIN_CONFIG_TSW_104us = (((uint16_t)0x1A) << 10),
dSPIN_CONFIG_TSW_108us = (((uint16_t)0x1B) << 10),
dSPIN_CONFIG_TSW_112us = (((uint16_t)0x1C) << 10),
dSPIN_CONFIG_TSW_116us = (((uint16_t)0x1D) << 10),
dSPIN_CONFIG_TSW_120us = (((uint16_t)0x1E) << 10),
dSPIN_CONFIG_TSW_124us = (((uint16_t)0x1F) << 10)
} dSPIN_CONFIG_TSW_TypeDef;
/* Status Register bit masks */
typedef enum {
dSPIN_STATUS_HIZ = (((uint16_t)0x0001)),
dSPIN_STATUS_BUSY = (((uint16_t)0x0002)),
dSPIN_STATUS_SW_F = (((uint16_t)0x0004)),
dSPIN_STATUS_SW_EVN = (((uint16_t)0x0008)),
dSPIN_STATUS_DIR = (((uint16_t)0x0010)),
dSPIN_STATUS_MOT_STATUS = (((uint16_t)0x0060)),
dSPIN_STATUS_NOTPERF_CMD = (((uint16_t)0x0080)),
dSPIN_STATUS_WRONG_CMD = (((uint16_t)0x0100)),
dSPIN_STATUS_UVLO = (((uint16_t)0x0200)),
dSPIN_STATUS_TH_WRN = (((uint16_t)0x0400)),
dSPIN_STATUS_TH_SD = (((uint16_t)0x0800)),
dSPIN_STATUS_OCD = (((uint16_t)0x1000)),
dSPIN_STATUS_SCK_MOD = (((uint16_t)0x8000))
} dSPIN_STATUS_Masks_TypeDef;
/* Status Register options */
typedef enum {
dSPIN_STATUS_MOT_STATUS_STOPPED = (((uint16_t)0x0000) << 5),
dSPIN_STATUS_MOT_STATUS_ACCELERATION = (((uint16_t)0x0001) << 5),
dSPIN_STATUS_MOT_STATUS_DECELERATION = (((uint16_t)0x0002) << 5),
dSPIN_STATUS_MOT_STATUS_CONST_SPD = (((uint16_t)0x0003) << 5)
} dSPIN_STATUS_TypeDef;
/* dSPIN internal register addresses */
typedef enum {
dSPIN_ABS_POS = ((uint8_t)0x01),
dSPIN_EL_POS = ((uint8_t)0x02),
dSPIN_MARK = ((uint8_t)0x03),
dSPIN_SPEED = ((uint8_t)0x04),
dSPIN_ACC = ((uint8_t)0x05),
dSPIN_DEC = ((uint8_t)0x06),
dSPIN_MAX_SPEED = ((uint8_t)0x07),
dSPIN_MIN_SPEED = ((uint8_t)0x08),
dSPIN_FS_SPD = ((uint8_t)0x15),
dSPIN_TVAL_HOLD = ((uint8_t)0x09),
dSPIN_TVAL_RUN = ((uint8_t)0x0A),
dSPIN_TVAL_ACC = ((uint8_t)0x0B),
dSPIN_TVAL_DEC = ((uint8_t)0x0C),
dSPIN_RESERVED_REG5 = ((uint8_t)0x0D),
dSPIN_T_FAST = ((uint8_t)0x0E),
dSPIN_TON_MIN = ((uint8_t)0x0F),
dSPIN_TOFF_MIN = ((uint8_t)0x10),
dSPIN_RESERVED_REG4 = ((uint8_t)0x11),
dSPIN_ADC_OUT = ((uint8_t)0x12),
dSPIN_OCD_TH = ((uint8_t)0x13),
dSPIN_RESERVED_REG3 = ((uint8_t)0x14),
dSPIN_STEP_MODE = ((uint8_t)0x16),
dSPIN_ALARM_EN = ((uint8_t)0x17),
dSPIN_CONFIG = ((uint8_t)0x18),
dSPIN_STATUS = ((uint8_t)0x19),
dSPIN_RESERVED_REG2 = ((uint8_t)0x1A),
dSPIN_RESERVED_REG1 = ((uint8_t)0x1B)
} dSPIN_Registers_TypeDef;
/* dSPIN command set */
typedef enum {
dSPIN_NOP = ((uint8_t)0x00),
dSPIN_SET_PARAM = ((uint8_t)0x00),
dSPIN_GET_PARAM = ((uint8_t)0x20),
dSPIN_RUN = ((uint8_t)0x50),
dSPIN_STEP_CLOCK = ((uint8_t)0x58),
dSPIN_MOVE = ((uint8_t)0x40),
dSPIN_GO_TO = ((uint8_t)0x60),
dSPIN_GO_TO_DIR = ((uint8_t)0x68),
dSPIN_GO_UNTIL = ((uint8_t)0x82),
dSPIN_GO_UNTIL_ACT_CPY = ((uint8_t)0x8A),
dSPIN_RELEASE_SW = ((uint8_t)0x92),
dSPIN_GO_HOME = ((uint8_t)0x70),
dSPIN_GO_MARK = ((uint8_t)0x78),
dSPIN_RESET_POS = ((uint8_t)0xD8),
dSPIN_RESET_DEVICE = ((uint8_t)0xC0),
dSPIN_SOFT_STOP = ((uint8_t)0xB0),
dSPIN_HARD_STOP = ((uint8_t)0xB8),
dSPIN_SOFT_HIZ = ((uint8_t)0xA0),
dSPIN_HARD_HIZ = ((uint8_t)0xA8),
dSPIN_GET_STATUS = ((uint8_t)0xD0),
dSPIN_RESERVED_CMD2 = ((uint8_t)0xEB),
dSPIN_RESERVED_CMD1 = ((uint8_t)0xF8)
} dSPIN_Commands_TypeDef;
/* dSPIN direction options */
typedef enum {
FWD = ((uint8_t)0x01),
REV = ((uint8_t)0x00)
} dSPIN_Direction_TypeDef;
/* dSPIN action options */
typedef enum {
ACTION_RESET = ((uint8_t)0x00),
ACTION_COPY = ((uint8_t)0x08)
} dSPIN_Action_TypeDef;
/**
* @}
*/
#endif /* defined(L6472) */
/* Exported macro ------------------------------------------------------------*/
#define Speed_Steps_to_Par(steps) ((uint32_t)(((steps)*67.108864)+0.5)) /* Speed conversion, range 0 to 15625 steps/s */
#define AccDec_Steps_to_Par(steps) ((uint16_t)(((steps)*0.068719476736)+0.5)) /* Acc/Dec rates conversion, range 14.55 to 59590 steps/s2 */
#define MaxSpd_Steps_to_Par(steps) ((uint16_t)(((steps)*0.065536)+0.5)) /* Max Speed conversion, range 15.25 to 15610 steps/s */
#define MinSpd_Steps_to_Par(steps) ((uint16_t)(((steps)*4.194304)+0.5)) /* Min Speed conversion, range 0 to 976.3 steps/s */
#define FSSpd_Steps_to_Par(steps) ((uint16_t)((steps)*0.065536)) /* Full Step Speed conversion, range 7.63 to 15625 steps/s */
#if defined(L6470)
#define IntSpd_Steps_to_Par(steps) ((uint16_t)(((steps)*4.194304)+0.5)) /* Intersect Speed conversion, range 0 to 3906 steps/s */
#define Kval_Perc_to_Par(perc) ((uint8_t)(((perc)/0.390625)+0.5)) /* KVAL conversions, range 0.4% to 99.6% */
#define BEMF_Slope_Perc_to_Par(perc) ((uint8_t)(((perc)/0.00156862745098)+0.5)) /* BEMF compensation slopes, range 0 to 0.4% s/step */
#define KTherm_to_Par(KTherm) ((uint8_t)(((KTherm - 1)/0.03125)+0.5)) /* K_THERM compensation conversion, range 1 to 1.46875 */
#define StallTh_to_Par(StallTh) ((uint8_t)(((StallTh - 31.25)/31.25)+0.5)) /* Stall Threshold conversion, range 31.25mA to 4000mA */
#endif /* defined(L6470) */
#if defined(L6472)
#define Tval_Current_to_Par(Tval) ((uint8_t)(((Tval - 31.25)/31.25)+0.5)) /* Torque regulation DAC current conversion, range 31.25mA to 4000mA */
#define Tmin_Time_to_Par(Tmin) ((uint8_t)(((Tmin - 0.5)*2)+0.5)) /* Minimum time conversion, range 0.5us to 64us */
#endif /* defined(L6472) */
/* Exported functions ------------------------------------------------------- */
void dSPIN_Delay(__IO uint32_t nCount);
void dSPIN_Gpio_Toggle(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void dSPIN_Led_Check(void);
void dSPIN_Reset_And_Standby(void);
void dSPIN_Peripherals_Init(void);
void dSPIN_PWM_Enable(uint16_t Period);
void dSPIN_PWM_DISABLE(void);
void dSPIN_Interrupt_Channel_Config(void);
void dSPIN_Flag_Interrupt_GPIO_Config(void);
void dSPIN_Busy_Interrupt_GPIO_Config(void);
void dSPIN_Busy_Interrupt_GPIO_DeConfig(void);
void dSPIN_Buttons_Interrupts_GPIO_Config(void);
void dSPIN_Switch_Motor_Interrupt_Config(void);
/* Config */
void dSPIN_Regs_Struct_Reset(dSPIN_RegsStruct_TypeDef* dSPIN_RegsStruct);
void dSPIN_Registers_Set(dSPIN_RegsStruct_TypeDef* dSPIN_RegsStruct);
/* Commands */
void dSPIN_Nop(void);
void dSPIN_Run(dSPIN_Direction_TypeDef direction, uint32_t speed);
void dSPIN_Step_Clock(dSPIN_Direction_TypeDef direction);
void dSPIN_Move(dSPIN_Direction_TypeDef direction, uint32_t n_step);
void dSPIN_Go_To(uint32_t abs_pos);
void dSPIN_Go_To_Dir(dSPIN_Direction_TypeDef direction, uint32_t abs_pos);
void dSPIN_Go_Until(dSPIN_Action_TypeDef action, dSPIN_Direction_TypeDef direction, uint32_t speed);
void dSPIN_Release_SW(dSPIN_Action_TypeDef action, dSPIN_Direction_TypeDef direction);
void dSPIN_Go_Home(void);
void dSPIN_Go_Mark(void);
void dSPIN_Reset_Pos(void);
void dSPIN_Reset_Device(void);
void dSPIN_Soft_Stop(void);
void dSPIN_Hard_Stop(void);
void dSPIN_Soft_HiZ(void);
void dSPIN_Hard_HiZ(void);
/* Low level commands */
void dSPIN_Set_Param(dSPIN_Registers_TypeDef param, uint32_t value);
uint32_t dSPIN_Get_Param(dSPIN_Registers_TypeDef param);
/* Low level stuff */
uint16_t dSPIN_Get_Status(void);
uint8_t dSPIN_Busy_HW(void);
uint8_t dSPIN_Busy_SW(void);
uint8_t dSPIN_Flag(void);
uint8_t dSPIN_Write_Byte(uint8_t byte);
/* TRASH */
void dSPIN_Write_Daisy_Chain_Bytes(uint8_t *pTxByte, uint8_t *pRxByte, uint8_t nBytes);
void dSPIN_All_Slaves_Registers_Set(uint8_t slaves_number, dSPIN_RegsStruct_TypeDef *dSPIN_RegsStructArray);
void dSPIN_All_Slaves_Set_Param(uint8_t slaves_number, uint8_t *pParam, uint32_t *pValue);
void dSPIN_All_Slaves_Get_Param(uint8_t slaves_number, uint8_t *pParam, uint32_t *pValue);
void dSPIN_One_Slave_Move(uint8_t slaveNumber, uint8_t slaves_number, dSPIN_Direction_TypeDef direction, uint32_t n_step);
void dSPIN_One_Slave_Run(uint8_t slaveNumber, uint8_t slaves_number, dSPIN_Direction_TypeDef direction, uint32_t speed);
void dSPIN_One_Slave_Send_Command(uint8_t slaveNumber, uint8_t slaves_number, uint8_t param, uint32_t value);
void dSPIN_All_Slaves_Send_Command(uint8_t slaves_number, uint8_t *pParam, uint32_t *pValue);
void dSPIN_All_Slaves_Get_Status(uint8_t slaves_number, uint32_t *pValue);
uint8_t dSPIN_One_Or_More_Slaves_Busy_SW(uint8_t slaves_number);
/** @} */
#endif /* __DSPIN_H */
/******************* (C) COPYRIGHT 2013 STMicroelectronics *****END OF FILE****/