/* Cgi/template routines for the /wifi url. */ /* * ---------------------------------------------------------------------------- * "THE BEER-WARE LICENSE" (Revision 42): * Jeroen Domburg wrote this file. As long as you retain * this notice you can do whatever you want with this stuff. If we meet some day, * and you think this stuff is worth it, you can buy me a beer in return. * ---------------------------------------------------------------------------- */ #include #include "cgiwifi.h" //Enable this to disallow any changes in AP settings //#define DEMO_MODE //WiFi access point data typedef struct { char ssid[32]; char bssid[8]; int channel; char rssi; char enc; } ApData; //Scan result typedef struct { char scanInProgress; //if 1, don't access the underlying stuff from the webpage. ApData **apData; int noAps; } ScanResultData; //Static scan status storage. static ScanResultData cgiWifiAps; #define CONNTRY_IDLE 0 #define CONNTRY_WORKING 1 #define CONNTRY_SUCCESS 2 #define CONNTRY_FAIL 3 //Connection result var static int connTryStatus=CONNTRY_IDLE; static os_timer_t resetTimer; //Callback the code calls when a wlan ap scan is done. Basically stores the result in //the cgiWifiAps struct. void ICACHE_FLASH_ATTR wifiScanDoneCb(void *arg, STATUS status) { int n; struct bss_info *bss_link = (struct bss_info *)arg; dbg("wifiScanDoneCb %d\n", status); if (status!=OK) { cgiWifiAps.scanInProgress=0; return; } //Clear prev ap data if needed. if (cgiWifiAps.apData!=NULL) { for (n=0; nnext.stqe_next; n++; } //Allocate memory for access point data cgiWifiAps.apData=(ApData **)malloc(sizeof(ApData *)*n); cgiWifiAps.noAps=n; info("Scan done: found %d APs\n", n); //Copy access point data to the static struct n=0; bss_link = (struct bss_info *)arg; while (bss_link != NULL) { if (n>=cgiWifiAps.noAps) { //This means the bss_link changed under our nose. Shouldn't happen! //Break because otherwise we will write in unallocated memory. warn("Huh? I have more than the allocated %d aps!\n", cgiWifiAps.noAps); break; } //Save the ap data. cgiWifiAps.apData[n]=(ApData *)malloc(sizeof(ApData)); cgiWifiAps.apData[n]->rssi=bss_link->rssi; cgiWifiAps.apData[n]->channel=bss_link->channel; cgiWifiAps.apData[n]->enc=bss_link->authmode; strncpy(cgiWifiAps.apData[n]->ssid, (char*)bss_link->ssid, 32); strncpy(cgiWifiAps.apData[n]->bssid, (char*)bss_link->bssid, 6); bss_link = bss_link->next.stqe_next; n++; } //We're done. cgiWifiAps.scanInProgress=0; } //Routine to start a WiFi access point scan. static void ICACHE_FLASH_ATTR wifiStartScan() { // int x; if (cgiWifiAps.scanInProgress) return; cgiWifiAps.scanInProgress=1; wifi_station_scan(NULL, wifiScanDoneCb); } //This CGI is called from the bit of AJAX-code in wifi.tpl. It will initiate a //scan for access points and if available will return the result of an earlier scan. //The result is embedded in a bit of JSON parsed by the javascript in wifi.tpl. int ICACHE_FLASH_ATTR cgiWiFiScan(HttpdConnData *connData) { int pos=(int)connData->cgiData; int len; char buff[1024]; if (!cgiWifiAps.scanInProgress && pos!=0) { //Fill in json code for an access point if (pos-1ssid, MAC2STR(cgiWifiAps.apData[pos-1]->bssid), cgiWifiAps.apData[pos-1]->rssi, cgiWifiAps.apData[pos-1]->enc, cgiWifiAps.apData[pos-1]->channel, (pos-1==cgiWifiAps.noAps-1)?"":","); httpdSend(connData, buff, len); } pos++; if ((pos-1)>=cgiWifiAps.noAps) { len=sprintf(buff, "]\n}\n}\n"); httpdSend(connData, buff, len); //Also start a new scan. wifiStartScan(); return HTTPD_CGI_DONE; } else { connData->cgiData=(void*)pos; return HTTPD_CGI_MORE; } } httpdStartResponse(connData, 200); httpdHeader(connData, "Content-Type", "text/json"); httpdEndHeaders(connData); if (cgiWifiAps.scanInProgress==1) { //We're still scanning. Tell Javascript code that. len=sprintf(buff, "{\n \"result\": { \n\"inProgress\": \"1\"\n }\n}\n"); httpdSend(connData, buff, len); return HTTPD_CGI_DONE; } else { //We have a scan result. Pass it on. len=sprintf(buff, "{\n \"result\": { \n\"inProgress\": \"0\", \n\"APs\": [\n"); httpdSend(connData, buff, len); if (cgiWifiAps.apData==NULL) cgiWifiAps.noAps=0; connData->cgiData=(void *)1; return HTTPD_CGI_MORE; } } //Temp store for new ap info. static struct station_config stconf; //This routine is ran some time after a connection attempt to an access point. If //the connect succeeds, this gets the module in STA-only mode. static void ICACHE_FLASH_ATTR resetTimerCb(void *arg) { int x=wifi_station_get_connect_status(); if (x==STATION_GOT_IP) { //Go to STA mode. This needs a reset, so do that. info("Got IP. Going into STA mode..\n"); wifi_set_opmode(1); system_restart(); } else { connTryStatus=CONNTRY_FAIL; error("Connect fail. Not going into STA-only mode.\n"); //Maybe also pass this through on the webpage? } } //Actually connect to a station. This routine is timed because I had problems //with immediate connections earlier. It probably was something else that caused it, //but I can't be arsed to put the code back :P static void ICACHE_FLASH_ATTR reassTimerCb(void *arg) { int x; dbg("Try to connect to AP....\n"); wifi_station_disconnect(); wifi_station_set_config(&stconf); wifi_station_connect(); x=wifi_get_opmode(); connTryStatus=CONNTRY_WORKING; if (x!=1) { //Schedule disconnect/connect os_timer_disarm(&resetTimer); os_timer_setfn(&resetTimer, resetTimerCb, NULL); os_timer_arm(&resetTimer, 15000, 0); //time out after 15 secs of trying to connect } } //This cgi uses the routines above to connect to a specific access point with the //given ESSID using the given password. int ICACHE_FLASH_ATTR cgiWiFiConnect(HttpdConnData *connData) { char essid[128]; char passwd[128]; static os_timer_t reassTimer; if (connData->conn==NULL) { //Connection aborted. Clean up. return HTTPD_CGI_DONE; } httpdFindArg(connData->post->buff, "essid", essid, sizeof(essid)); httpdFindArg(connData->post->buff, "passwd", passwd, sizeof(passwd)); strncpy((char*)stconf.ssid, essid, 32); strncpy((char*)stconf.password, passwd, 64); info("Try to connect to AP %s pw %s\n", essid, passwd); //Schedule disconnect/connect os_timer_disarm(&reassTimer); os_timer_setfn(&reassTimer, reassTimerCb, NULL); //Set to 0 if you want to disable the actual reconnecting bit #ifdef DEMO_MODE httpdRedirect(connData, "/wifi"); #else os_timer_arm(&reassTimer, 500, 0); httpdRedirect(connData, "connecting.html"); #endif return HTTPD_CGI_DONE; } //This cgi uses the routines above to connect to a specific access point with the //given ESSID using the given password. int ICACHE_FLASH_ATTR cgiWiFiSetMode(HttpdConnData *connData) { int len; char buff[1024]; if (connData->conn==NULL) { //Connection aborted. Clean up. return HTTPD_CGI_DONE; } len=httpdFindArg(connData->getArgs, "mode", buff, sizeof(buff)); if (len!=0) { info("cgiWifiSetMode: %s\n", buff); #ifndef DEMO_MODE wifi_set_opmode(atoi(buff)); system_restart(); #endif } httpdRedirect(connData, "/wifi"); return HTTPD_CGI_DONE; } int ICACHE_FLASH_ATTR cgiWiFiConnStatus(HttpdConnData *connData) { char buff[1024]; int len; struct ip_info info; int st=wifi_station_get_connect_status(); httpdStartResponse(connData, 200); httpdHeader(connData, "Content-Type", "text/json"); httpdEndHeaders(connData); if (connTryStatus==CONNTRY_IDLE) { len=sprintf(buff, "{\n \"status\": \"idle\"\n }\n"); } else if (connTryStatus==CONNTRY_WORKING || connTryStatus==CONNTRY_SUCCESS) { if (st==STATION_GOT_IP) { wifi_get_ip_info(0, &info); len=sprintf(buff, "{\n \"status\": \"success\",\n \"ip\": \"%d.%d.%d.%d\" }\n", (info.ip.addr>>0)&0xff, (info.ip.addr>>8)&0xff, (info.ip.addr>>16)&0xff, (info.ip.addr>>24)&0xff); //Reset into AP-only mode sooner. os_timer_disarm(&resetTimer); os_timer_setfn(&resetTimer, resetTimerCb, NULL); os_timer_arm(&resetTimer, 1000, 0); } else { len=sprintf(buff, "{\n \"status\": \"working\"\n }\n"); } } else { len=sprintf(buff, "{\n \"status\": \"fail\"\n }\n"); } httpdSend(connData, buff, len); return HTTPD_CGI_DONE; } //Template code for the WLAN page. int ICACHE_FLASH_ATTR tplWlan(HttpdConnData *connData, char *token, void **arg) { char buff[1024]; int x; static struct station_config stconf; if (token==NULL) return HTTPD_CGI_DONE; wifi_station_get_config(&stconf); strcpy(buff, "Unknown"); if (strcmp(token, "WiFiMode")==0) { x=wifi_get_opmode(); if (x==1) strcpy(buff, "Client"); if (x==2) strcpy(buff, "SoftAP"); if (x==3) strcpy(buff, "STA+AP"); } else if (strcmp(token, "currSsid")==0) { strcpy(buff, (char*)stconf.ssid); } else if (strcmp(token, "WiFiPasswd")==0) { strcpy(buff, (char*)stconf.password); } else if (strcmp(token, "WiFiapwarn")==0) { x=wifi_get_opmode(); if (x==2) { strcpy(buff, "Can't scan in this mode. Click here to go to STA+AP mode."); } else { strcpy(buff, "Click here to go to standalone AP mode."); } } httpdSend(connData, buff, -1); return HTTPD_CGI_DONE; }