ESP8266 part of the f105-motor-demo project (see f105-motor-demo_stm32)
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
f105-motor-demo_esp/README.md

97 lines
4.1 KiB

9 years ago
# esp-httpd README #
This is the demonstration project for the small but powerful libesphttpd webserver
for ESP8266(EX) chips. It is an example of how to make a module that can have
the AP it connects to configured over a webbrowser. It also illustrates multiple
flash layouts and some OTA update functionality.
## ABOUT THE WEBSERVER ##
The Good (aka: what's awesome)
- Supports multiple connections, for eg simultaneous html/css/js/images downloading
- Static files stored in flash, in an (optionally compressed) RO filesystem
- Pluggable using external cgi routines
- Simple template engine for mixed c and html things
- Usable as an embedded library - should be easy to drop into your existing projects
- Includes websocket support
The Bad (aka: what can be improved)
- Not built for speediness, although it's reasonable fast.
- Built according to what I remember of the HTTP protocol, not according to the
RFCs. Should work with most modern browsers, though.
- No support for https.
The Ugly (aka: bugs, misbehaviour)
- Possible buffer overflows (usually not remotely exploitable) due to no os_snprintf
This can be theoretically remedied by either Espressif including an os_snprintf in
their libs or by using some alternate printf lib, like elm-chans xprintf
## SOURCE OF THIS CODE ##
The official esphttpd repo lives at http://git.spritesserver.nl/esphttpd.git/ and
http://git.spritesserver.nl/libesphttpd.git/ . If you're a fan of Github, you can also
peruse the official mirror at https://github.com/Spritetm/esphttpd and https://github.com/Spritetm/libesphttpd . If
you want to discuss this code, there is a subforum at esp8266.com: http://www.esp8266.com/viewforum.php?f=34 .
## ABOUT THE EXAMPLE ##
When you flash the example into an ESP8266(EX) module, you get a small webserver with a few example
pages. If you've already connected your module to your WLAN before, it'll keep those settings. When
you haven't or the settings are wrong, keep GPIO0 for >5 seconds. The module will reboot into
its STA+AP mode. Connect a computer to the newly formed access point and browse to
http://192.168.4.1/wifi in order to connect the module to your WiFi network. The example also
allows you to control a LED that's connected to GPIO2.
## BUILDING EVERYTHING ##
For this, you need an environment that can compile ESP8266 firmware. Environments for this still
are in flux at the moment, but I'm using esp-open-sdk: https://github.com/pfalcon/esp-open-sdk .
You probably also need an UNIX-like system; I'm working on Debian Linux myself.
To manage the paths to all this, you can source a small shell fragment into your current session. For
example, I source a file with these contents:
export PATH=${PWD}/esp-open-sdk/xtensa-lx106-elf/bin:$PATH
export SDK_BASE=${PWD}/esp-open-sdk/sdk
export ESPTOOL=${PWD}/esptool/esptool.py
export ESPPORT=/dev/ttyUSB0
export ESPBAUD=460800
Actual setup of the SDK and toolchain is out of the scope of this document, so I hope this helps you
enough to set up your own if you haven't already.
If you have that, you can clone out the source code:
git clone http://git.spritesserver.nl/esphttpd.git/
This project makes use of heatshrink, which is a git submodule. To fetch the code:
cd esphttpd
git submodule init
git submodule update
Now, build the code:
make
Depending on the way you built it, esp-open-sdk sometimes patches Espressifs SDK, needing a slightly different
compiling process. If this is needed, you will get errors during compiling complaining about uint8_t being
undeclared. If this happens, try building like this:
make USE_OPENSDK=yes
You can also edit the Makefile to change this more permanently.
After the compile process, flash the code happens in 2 steps. First the code itself gets flashed. Reset the module into bootloader
mode and enter 'make flash'.
The 2nd step is to pack the static files the webserver will serve and flash that. Reset the module into
bootloader mode again and enter `make htmlflash`.
You should have a working webserver now.
## WRITING CODE FOR THE WEBSERVER ##
Please see the README.md of the libesphttpd project for the programming manual.