electro
/
espterm-stm8-demo
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
Demo application running on STM8 demonstrating a web interface with ESPTerm
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2 Commits
1 Branch
0 Tags
321 KiB
 
 
Tag: Branch: Tree: master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'master'
${ noResults }
espterm-stm8-demo/Libraries/SPL/inc/stm8s_uart3.h

389 lines
15 KiB
Raw Permalink Blame History

/**
********************************************************************************
* @file stm8s_uart3.h
* @author MCD Application Team
* @version V2.2.0
* @date 30-September-2014
* @brief This file contains all functions prototypes and macros for the UART3 peripheral.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM8S_UART3_H
#define __STM8S_UART3_H
/* Includes ------------------------------------------------------------------*/
#include "stm8s.h"
/** @addtogroup STM8S_StdPeriph_Driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @addtogroup UART3_Exported_Types
* @{
*/
/**
* @brief UART3 WakeUP Modes
*/
typedef enum { UART3_WAKEUP_IDLELINE = (uint8_t)0x00, /**< 0x01 Idle Line wake up*/
UART3_WAKEUP_ADDRESSMARK = (uint8_t)0x08 /**< 0x02 Address Mark wake up*/
} UART3_WakeUp_TypeDef;
/**
* @brief UART3 LIN Break detection length possible values
*/
typedef enum { UART3_LINBREAKDETECTIONLENGTH_10BITS = (uint8_t)0x00, /**< 10 bits Lin Break detection */
UART3_LINBREAKDETECTIONLENGTH_11BITS = (uint8_t)0x01 /**< 11 bits Lin Break detection */
} UART3_LINBreakDetectionLength_TypeDef;
/**
* @brief UART3 stop bits possible values
*/
typedef enum { UART3_STOPBITS_1 = (uint8_t)0x00, /**< One stop bit is transmitted at the end of frame*/
UART3_STOPBITS_2 = (uint8_t)0x20 /**< Two stop bits are transmitted at the end of frame*/
} UART3_StopBits_TypeDef;
/**
* @brief UART3 parity possible values
*/
typedef enum { UART3_PARITY_NO = (uint8_t)0x00, /**< No Parity*/
UART3_PARITY_EVEN = (uint8_t)0x04, /**< Even Parity*/
UART3_PARITY_ODD = (uint8_t)0x06 /**< Odd Parity*/
} UART3_Parity_TypeDef;
/**
* @brief UART3 Word length possible values
*/
typedef enum { UART3_WORDLENGTH_8D = (uint8_t)0x00, /**< 0x00 8 bits Data*/
UART3_WORDLENGTH_9D = (uint8_t)0x10 /**< 0x10 9 bits Data*/
} UART3_WordLength_TypeDef;
/**
* @brief UART3 Mode Transmit/Receive possible values
*/
typedef enum { UART3_MODE_RX_ENABLE = (uint8_t)0x08, /**< 0x08 Receive Enable*/
UART3_MODE_TX_ENABLE = (uint8_t)0x04, /**< 0x04 Transmit Enable*/
UART3_MODE_TX_DISABLE = (uint8_t)0x80, /**< 0x80 Receive Enable*/
UART3_MODE_RX_DISABLE = (uint8_t)0x40, /**< 0x40 Single-wire Half-duplex mode*/
UART3_MODE_TXRX_ENABLE = (uint8_t)0x0C /**< 0x0C Receive Enable and Transmit enable*/
} UART3_Mode_TypeDef;
/**
* @brief UART3 Mode possible values
*/
typedef enum { UART3_LIN_MODE_MASTER = (uint8_t)0x00, /**< LIN Master Mode*/
UART3_LIN_MODE_SLAVE = (uint8_t)0x01 /**< LIN Slave Mode*/
} UART3_LinMode_TypeDef;
/**
* @brief UART3 automatic resynchronisation possible values
*/
typedef enum { UART3_LIN_AUTOSYNC_DISABLE = (uint8_t)0x00, /**< LIN Autosynchronization Disable*/
UART3_LIN_AUTOSYNC_ENABLE = (uint8_t)0x01 /**< LIN Autosynchronization Enable*/
} UART3_LinAutosync_TypeDef;
/**
* @brief UART3 Divider Update Method possible values
*/
typedef enum { UART3_LIN_DIVUP_LBRR1 = (uint8_t)0x00, /**< LIN LDIV is updated as soon as LBRR1 is written*/
UART3_LIN_DIVUP_NEXTRXNE = (uint8_t)0x01 /**< LIN LDIV is updated at the next received character*/
} UART3_LinDivUp_TypeDef;
/**
* @brief UART3 Flag possible values
*/
typedef enum
{
UART3_FLAG_TXE = (uint16_t)0x0080, /*!< Transmit Data Register Empty flag */
UART3_FLAG_TC = (uint16_t)0x0040, /*!< Transmission Complete flag */
UART3_FLAG_RXNE = (uint16_t)0x0020, /*!< Read Data Register Not Empty flag */
UART3_FLAG_IDLE = (uint16_t)0x0010, /*!< Idle line detected flag */
UART3_FLAG_OR_LHE = (uint16_t)0x0008, /*!< OverRun error flag */
UART3_FLAG_NF = (uint16_t)0x0004, /*!< Noise error flag */
UART3_FLAG_FE = (uint16_t)0x0002, /*!< Framing Error flag */
UART3_FLAG_PE = (uint16_t)0x0001, /*!< Parity Error flag */
UART3_FLAG_SBK = (uint16_t)0x0101, /**< Send Break Complete interrupt flag */
UART3_FLAG_LBDF = (uint16_t)0x0210, /**< LIN Break Detection Flag */
UART3_FLAG_LHDF = (uint16_t)0x0302, /**< LIN Header Detection Flag*/
UART3_FLAG_LSF = (uint16_t)0x0301 /**< LIN Sync Field Flag*/
} UART3_Flag_TypeDef;
/**
* @brief UART3 Interrupt definition
* UART3_IT possible values
* Elements values convention: 0xZYX
* X: Position of the corresponding Interrupt
* - For the following values, X means the interrupt position in the CR2 register.
* UART3_IT_TXE
* UART3_IT_TC
* UART3_IT_RXNE
* UART3_IT_IDLE
* UART3_IT_OR
* - For the UART3_IT_PE value, X means the flag position in the CR1 register.
* - For the UART3_IT_LBDF value, X means the flag position in the CR4 register.
* - For the UART3_IT_LHDF value, X means the flag position in the CR6 register.
* Y: Flag position
* - For the following values, Y means the flag (pending bit) position in the SR register.
* UART3_IT_TXE
* UART3_IT_TC
* UART3_IT_RXNE
* UART3_IT_IDLE
* UART3_IT_OR
* UART3_IT_PE
* - For the UART3_IT_LBDF value, Y means the flag position in the CR4 register.
* - For the UART3_IT_LHDF value, Y means the flag position in the CR6 register.
* Z: Register index: indicate in which register the dedicated interrupt source is:
* - 1==> CR1 register
* - 2==> CR2 register
* - 3==> CR4 register
* - 4==> CR6 register
*/
typedef enum { UART3_IT_TXE = (uint16_t)0x0277, /**< Transmit interrupt */
UART3_IT_TC = (uint16_t)0x0266, /**< Transmission Complete interrupt */
UART3_IT_RXNE = (uint16_t)0x0255, /**< Data Register Not Empty interrupt */
UART3_IT_IDLE = (uint16_t)0x0244, /**< Idle line detected interrupt */
UART3_IT_OR = (uint16_t)0x0235, /**< OverRun error interrupt */
UART3_IT_PE = (uint16_t)0x0100, /**< Parity Error interrupt */
UART3_IT_LBDF = (uint16_t)0x0346, /**< LIN Break Detection interrupt */
UART3_IT_LHDF = (uint16_t)0x0412, /**< LIN Header Detection interrupt*/
UART3_IT_RXNE_OR = (uint16_t)0x0205 /*!< Receive/Overrun interrupt */
} UART3_IT_TypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/* Exported macros ------------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup UART3_Private_Macros
* @{
*/
/**
* @brief Macro used by the assert_param function in order to check the
* different sensitivity values for the FLAGs
*/
#define IS_UART3_FLAG_OK(Flag) \
(((Flag) == UART3_FLAG_TXE) || \
((Flag) == UART3_FLAG_TC) || \
((Flag) == UART3_FLAG_RXNE) || \
((Flag) == UART3_FLAG_IDLE) || \
((Flag) == UART3_FLAG_OR_LHE) || \
((Flag) == UART3_FLAG_NF) || \
((Flag) == UART3_FLAG_FE) || \
((Flag) == UART3_FLAG_PE) || \
((Flag) == UART3_FLAG_SBK) || \
((Flag) == UART3_FLAG_LSF) || \
((Flag) == UART3_FLAG_LHDF) || \
((Flag) == UART3_FLAG_LBDF))
/**
* @brief Macro used by the assert_param function in order to check the
* different sensitivity values for the FLAGs that can be cleared by writing 0
*/
#define IS_UART3_CLEAR_FLAG_OK(Flag) \
(((Flag) == UART3_FLAG_RXNE) || \
((Flag) == UART3_FLAG_LHDF) || \
((Flag) == UART3_FLAG_LSF) || \
((Flag) == UART3_FLAG_LBDF))
/**
* @brief Macro used by the assert_param function in order to check the
* different sensitivity values for the Interrupts
*/
#define IS_UART3_CONFIG_IT_OK(Interrupt) \
(((Interrupt) == UART3_IT_PE) || \
((Interrupt) == UART3_IT_TXE) || \
((Interrupt) == UART3_IT_TC) || \
((Interrupt) == UART3_IT_RXNE_OR ) || \
((Interrupt) == UART3_IT_IDLE) || \
((Interrupt) == UART3_IT_LHDF) || \
((Interrupt) == UART3_IT_LBDF))
/**
* @brief Macro used by the assert function in order to check the different
* sensitivity values for the pending bit
*/
#define IS_UART3_GET_IT_OK(ITPendingBit) \
(((ITPendingBit) == UART3_IT_TXE) || \
((ITPendingBit) == UART3_IT_TC) || \
((ITPendingBit) == UART3_IT_RXNE) || \
((ITPendingBit) == UART3_IT_IDLE) || \
((ITPendingBit) == UART3_IT_OR) || \
((ITPendingBit) == UART3_IT_LBDF) || \
((ITPendingBit) == UART3_IT_LHDF) || \
((ITPendingBit) == UART3_IT_PE))
/**
* @brief Macro used by the assert function in order to check the different
* sensitivity values for the pending bit that can be cleared by writing 0
*/
#define IS_UART3_CLEAR_IT_OK(ITPendingBit) \
(((ITPendingBit) == UART3_IT_RXNE) || \
((ITPendingBit) == UART3_IT_LHDF) || \
((ITPendingBit) == UART3_IT_LBDF))
/**
* @brief Macro used by the assert_param function in order to check the different
* sensitivity values for the MODEs
*/
#define IS_UART3_MODE_OK(Mode) \
(((Mode) == (uint8_t)UART3_MODE_RX_ENABLE) || \
((Mode) == (uint8_t)UART3_MODE_RX_DISABLE) || \
((Mode) == (uint8_t)UART3_MODE_TX_ENABLE) || \
((Mode) == (uint8_t)UART3_MODE_TX_DISABLE) || \
((Mode) == (uint8_t)UART3_MODE_TXRX_ENABLE) || \
((Mode) == (uint8_t)((uint8_t)UART3_MODE_TX_ENABLE|(uint8_t)UART3_MODE_RX_ENABLE)) || \
((Mode) == (uint8_t)((uint8_t)UART3_MODE_TX_ENABLE|(uint8_t)UART3_MODE_RX_DISABLE)) || \
((Mode) == (uint8_t)((uint8_t)UART3_MODE_TX_DISABLE|(uint8_t)UART3_MODE_RX_DISABLE)) || \
((Mode) == (uint8_t)((uint8_t)UART3_MODE_TX_DISABLE|(uint8_t)UART3_MODE_RX_ENABLE)))
/**
* @brief Macro used by the assert_param function in order to check the different
* sensitivity values for the WordLengths
*/
#define IS_UART3_WORDLENGTH_OK(WordLength) \
(((WordLength) == UART3_WORDLENGTH_8D) || \
((WordLength) == UART3_WORDLENGTH_9D))
/**
* @brief Macro used by the assert_param function in order to check the different
* sensitivity values for the WakeUps
*/
#define IS_UART3_WAKEUP_OK(WakeUpMode) \
(((WakeUpMode) == UART3_WAKEUP_IDLELINE) || \
((WakeUpMode) == UART3_WAKEUP_ADDRESSMARK))
/**
* @brief Macro used by the assert_param function in order to check the different
* sensitivity values for the LINBreakDetectionLengths
*/
#define IS_UART3_LINBREAKDETECTIONLENGTH_OK(LINBreakDetectionLengths) \
(((LINBreakDetectionLengths) == UART3_LINBREAKDETECTIONLENGTH_10BITS) || \
((LINBreakDetectionLengths) == UART3_LINBREAKDETECTIONLENGTH_11BITS))
/**
* @brief Macro used by the assert_param function in order to check the different
* sensitivity values for the UART3_StopBits
*/
#define IS_UART3_STOPBITS_OK(StopBit) \
(((StopBit) == UART3_STOPBITS_1) || \
((StopBit) == UART3_STOPBITS_2))
/**
* @brief Macro used by the assert_param function in order to check the different
* sensitivity values for the Parity
*/
#define IS_UART3_PARITY_OK(Parity) \
(((Parity) == UART3_PARITY_NO) || \
((Parity) == UART3_PARITY_EVEN) || \
((Parity) == UART3_PARITY_ODD ))
/**
* @brief Macro used by the assert_param function in order to check the maximum
* baudrate value
*/
#define IS_UART3_BAUDRATE_OK(NUM) ((NUM) <= (uint32_t)625000)
/**
* @brief Macro used by the assert_param function in order to check the address
* of the UART3 or UART node
*/
#define UART3_ADDRESS_MAX ((uint8_t)16)
#define IS_UART3_ADDRESS_OK(Node) ((Node) < UART3_ADDRESS_MAX)
/**
* @brief Macro used by the assert_param function in order to check the LIN mode
*/
#define IS_UART3_SLAVE_OK(Mode) \
(((Mode) == UART3_LIN_MODE_MASTER) || \
((Mode) == UART3_LIN_MODE_SLAVE))
/**
* @brief Macro used by the assert_param function in order to check the LIN
* automatic resynchronization mode
*/
#define IS_UART3_AUTOSYNC_OK(AutosyncMode) \
(((AutosyncMode) == UART3_LIN_AUTOSYNC_ENABLE) || \
((AutosyncMode) == UART3_LIN_AUTOSYNC_DISABLE))
/**
* @brief Macro used by the assert_param function in order to check the LIN
* divider update method
*/
#define IS_UART3_DIVUP_OK(DivupMethod) \
(((DivupMethod) == UART3_LIN_DIVUP_LBRR1) || \
((DivupMethod) == UART3_LIN_DIVUP_NEXTRXNE))
/**
* @}
*/
/* Exported functions ------------------------------------------------------- */
/** @addtogroup UART3_Exported_Functions
* @{
*/
void UART3_DeInit(void);
void UART3_Init(uint32_t BaudRate, UART3_WordLength_TypeDef WordLength,
UART3_StopBits_TypeDef StopBits, UART3_Parity_TypeDef Parity,
UART3_Mode_TypeDef Mode);
void UART3_Cmd(FunctionalState NewState);
void UART3_ITConfig(UART3_IT_TypeDef UART3_IT, FunctionalState NewState);
void UART3_LINBreakDetectionConfig(UART3_LINBreakDetectionLength_TypeDef UART3_LINBreakDetectionLength);
void UART3_LINConfig(UART3_LinMode_TypeDef UART3_Mode,
UART3_LinAutosync_TypeDef UART3_Autosync,
UART3_LinDivUp_TypeDef UART3_DivUp);
void UART3_LINCmd(FunctionalState NewState);
void UART3_ReceiverWakeUpCmd(FunctionalState NewState);
void UART3_WakeUpConfig( UART3_WakeUp_TypeDef UART3_WakeUp);
uint8_t UART3_ReceiveData8(void);
uint16_t UART3_ReceiveData9(void);
void UART3_SendData8(uint8_t Data);
void UART3_SendData9(uint16_t Data);
void UART3_SendBreak(void);
void UART3_SetAddress(uint8_t UART3_Address);
FlagStatus UART3_GetFlagStatus(UART3_Flag_TypeDef UART3_FLAG);
void UART3_ClearFlag(UART3_Flag_TypeDef UART3_FLAG);
ITStatus UART3_GetITStatus(UART3_IT_TypeDef UART3_IT);
void UART3_ClearITPendingBit(UART3_IT_TypeDef UART3_IT);
/**
* @}
*/
#endif /* __STM8S_UART3_H */
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/