/**
  ******************************************************************************
  * @file    stm8s_adc2.c
  * @author  MCD Application Team
  * @version V2.2.0
  * @date    30-September-2014
  * @brief   This file contains all the functions/macros for the ADC2 peripheral.
   ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
  *
  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        http://www.st.com/software_license_agreement_liberty_v2
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "stm8s_adc2.h"

/** @addtogroup STM8S_StdPeriph_Driver
  * @{
  */
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/

/* Public functions ----------------------------------------------------------*/

/**
  * @addtogroup ADC2_Public_Functions
  * @{
  */

/**
  * @brief  Deinitializes the ADC2 peripheral registers to their default reset
  * values.
  * @param  None
  * @retval None
  */
void ADC2_DeInit(void)
{
  ADC2->CSR  = ADC2_CSR_RESET_VALUE;
  ADC2->CR1  = ADC2_CR1_RESET_VALUE;
  ADC2->CR2  = ADC2_CR2_RESET_VALUE;
  ADC2->TDRH = ADC2_TDRH_RESET_VALUE;
  ADC2->TDRL = ADC2_TDRL_RESET_VALUE;
}

/**
  * @brief  Initializes the ADC2 peripheral according to the specified parameters
  * @param   ADC2_ConversionMode: specifies the conversion mode
  * can be one of the values of @ref ADC2_ConvMode_TypeDef.
  * @param   ADC2_Channel: specifies the channel to convert
  * can be one of the values of @ref ADC2_Channel_TypeDef.
  * @param   ADC2_PrescalerSelection: specifies the ADC2 prescaler
  * can be one of the values of @ref ADC2_PresSel_TypeDef.
  * @param   ADC2_ExtTrigger: specifies the external trigger
  * can be one of the values of @ref ADC2_ExtTrig_TypeDef.
  * @param   ADC2_ExtTriggerState: specifies the external trigger new state
  * can be one of the values of @ref FunctionalState.
  * @param   ADC2_Align: specifies the converted data alignment
  * can be one of the values of @ref ADC2_Align_TypeDef.
  * @param   ADC2_SchmittTriggerChannel: specifies the schmitt trigger channel
  * can be one of the values of @ref ADC2_SchmittTrigg_TypeDef.
  * @param   ADC2_SchmittTriggerState: specifies the schmitt trigger state
  * can be one of the values of @ref FunctionalState.
  * @retval None
  */
void ADC2_Init(ADC2_ConvMode_TypeDef ADC2_ConversionMode, ADC2_Channel_TypeDef ADC2_Channel, ADC2_PresSel_TypeDef ADC2_PrescalerSelection, ADC2_ExtTrig_TypeDef ADC2_ExtTrigger, FunctionalState ADC2_ExtTriggerState, ADC2_Align_TypeDef ADC2_Align, ADC2_SchmittTrigg_TypeDef ADC2_SchmittTriggerChannel, FunctionalState ADC2_SchmittTriggerState)
{
  /* Check the parameters */
  assert_param(IS_ADC2_CONVERSIONMODE_OK(ADC2_ConversionMode));
  assert_param(IS_ADC2_CHANNEL_OK(ADC2_Channel));
  assert_param(IS_ADC2_PRESSEL_OK(ADC2_PrescalerSelection));
  assert_param(IS_ADC2_EXTTRIG_OK(ADC2_ExtTrigger));
  assert_param(IS_FUNCTIONALSTATE_OK(((ADC2_ExtTriggerState))));
  assert_param(IS_ADC2_ALIGN_OK(ADC2_Align));
  assert_param(IS_ADC2_SCHMITTTRIG_OK(ADC2_SchmittTriggerChannel));
  assert_param(IS_FUNCTIONALSTATE_OK(ADC2_SchmittTriggerState));
  
  /*-----------------CR1 & CSR configuration --------------------*/
  /* Configure the conversion mode and the channel to convert
  respectively according to ADC2_ConversionMode & ADC2_Channel values  &  ADC2_Align values */
  ADC2_ConversionConfig(ADC2_ConversionMode, ADC2_Channel, ADC2_Align);
  /* Select the prescaler division factor according to ADC2_PrescalerSelection values */
  ADC2_PrescalerConfig(ADC2_PrescalerSelection);
  
  /*-----------------CR2 configuration --------------------*/
  /* Configure the external trigger state and event respectively
  according to ADC2_ExtTrigStatus, ADC2_ExtTrigger */
  ADC2_ExternalTriggerConfig(ADC2_ExtTrigger, ADC2_ExtTriggerState);
  
  /*------------------TDR configuration ---------------------------*/
  /* Configure the schmitt trigger channel and state respectively
  according to ADC2_SchmittTriggerChannel & ADC2_SchmittTriggerNewState  values */
  ADC2_SchmittTriggerConfig(ADC2_SchmittTriggerChannel, ADC2_SchmittTriggerState);
  
  /* Enable the ADC2 peripheral */
  ADC2->CR1 |= ADC2_CR1_ADON;
}

/**
  * @brief  Enables or Disables the ADC2 peripheral.
  * @param   NewState: specifies the peripheral enabled or disabled state.
  * @retval None
  */
void ADC2_Cmd(FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_FUNCTIONALSTATE_OK(NewState));
  
  if (NewState != DISABLE)
  {
    ADC2->CR1 |= ADC2_CR1_ADON;
  }
  else /* NewState == DISABLE */
  {
    ADC2->CR1 &= (uint8_t)(~ADC2_CR1_ADON);
  }
}

/**
  * @brief  Enables or disables the ADC2 interrupt.
  * @param   NewState specifies the state of ADC2 interrupt.
  * @retval None
  */
void ADC2_ITConfig(FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_FUNCTIONALSTATE_OK(NewState));
  
  if (NewState != DISABLE)
  {
    /* Enable the ADC2 interrupts */
    ADC2->CSR |= (uint8_t)ADC2_CSR_EOCIE;
  }
  else  /*NewState == DISABLE */
  {
    /* Disable the ADC2 interrupts */
    ADC2->CSR &= (uint8_t)(~ADC2_CSR_EOCIE);
  }
}

/**
  * @brief  Configure the ADC2 prescaler division factor.
  * @param   ADC2_Prescaler: the selected prescaler.
  * It can be one of the values of @ref ADC2_PresSel_TypeDef.
  * @retval None
  */
void ADC2_PrescalerConfig(ADC2_PresSel_TypeDef ADC2_Prescaler)
{
  /* Check the parameter */
  assert_param(IS_ADC2_PRESSEL_OK(ADC2_Prescaler));
  
  /* Clear the SPSEL bits */
  ADC2->CR1 &= (uint8_t)(~ADC2_CR1_SPSEL);
  /* Select the prescaler division factor according to ADC2_PrescalerSelection values */
  ADC2->CR1 |= (uint8_t)(ADC2_Prescaler);
}

/**
  * @brief  Enables or disables the ADC2 Schmitt Trigger on a selected channel.
  * @param   ADC2_SchmittTriggerChannel specifies the desired Channel.
  * It can be set of the values of @ref ADC2_SchmittTrigg_TypeDef.
  * @param   NewState specifies the Channel  ADC2 Schmitt Trigger new status.
  * can have one of the values of @ref FunctionalState.
  * @retval None
  */
void ADC2_SchmittTriggerConfig(ADC2_SchmittTrigg_TypeDef ADC2_SchmittTriggerChannel, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_ADC2_SCHMITTTRIG_OK(ADC2_SchmittTriggerChannel));
  assert_param(IS_FUNCTIONALSTATE_OK(NewState));
  
  if (ADC2_SchmittTriggerChannel == ADC2_SCHMITTTRIG_ALL)
  {
    if (NewState != DISABLE)
    {
      ADC2->TDRL &= (uint8_t)0x0;
      ADC2->TDRH &= (uint8_t)0x0;
    }
    else /* NewState == DISABLE */
    {
      ADC2->TDRL |= (uint8_t)0xFF;
      ADC2->TDRH |= (uint8_t)0xFF;
    }
  }
  else if (ADC2_SchmittTriggerChannel < ADC2_SCHMITTTRIG_CHANNEL8)
  {
    if (NewState != DISABLE)
    {
      ADC2->TDRL &= (uint8_t)(~(uint8_t)((uint8_t)0x01 << (uint8_t)ADC2_SchmittTriggerChannel));
    }
    else /* NewState == DISABLE */
    {
      ADC2->TDRL |= (uint8_t)((uint8_t)0x01 << (uint8_t)ADC2_SchmittTriggerChannel);
    }
  }
  else /* ADC2_SchmittTriggerChannel >= ADC2_SCHMITTTRIG_CHANNEL8 */
  {
    if (NewState != DISABLE)
    {
      ADC2->TDRH &= (uint8_t)(~(uint8_t)((uint8_t)0x01 << ((uint8_t)ADC2_SchmittTriggerChannel - (uint8_t)8)));
    }
    else /* NewState == DISABLE */
    {
      ADC2->TDRH |= (uint8_t)((uint8_t)0x01 << ((uint8_t)ADC2_SchmittTriggerChannel - (uint8_t)8));
    }
  }
}

/**
  * @brief  Configure the ADC2 conversion on selected channel.
  * @param   ADC2_ConversionMode Specifies the conversion type.
  * It can be set of the values of @ref ADC2_ConvMode_TypeDef
  * @param   ADC2_Channel specifies the ADC2 Channel.
  * It can be set of the values of @ref ADC2_Channel_TypeDef
  * @param   ADC2_Align specifies the converted data alignment.
  * It can be set of the values of @ref ADC2_Align_TypeDef
  * @retval None
  */
void ADC2_ConversionConfig(ADC2_ConvMode_TypeDef ADC2_ConversionMode, ADC2_Channel_TypeDef ADC2_Channel, ADC2_Align_TypeDef ADC2_Align)
{
  /* Check the parameters */
  assert_param(IS_ADC2_CONVERSIONMODE_OK(ADC2_ConversionMode));
  assert_param(IS_ADC2_CHANNEL_OK(ADC2_Channel));
  assert_param(IS_ADC2_ALIGN_OK(ADC2_Align));
  
  /* Clear the align bit */
  ADC2->CR2 &= (uint8_t)(~ADC2_CR2_ALIGN);
  /* Configure the data alignment */
  ADC2->CR2 |= (uint8_t)(ADC2_Align);
  
  if (ADC2_ConversionMode == ADC2_CONVERSIONMODE_CONTINUOUS)
  {
    /* Set the continuous conversion mode */
    ADC2->CR1 |= ADC2_CR1_CONT;
  }
  else /* ADC2_ConversionMode == ADC2_CONVERSIONMODE_SINGLE */
  {
    /* Set the single conversion mode */
    ADC2->CR1 &= (uint8_t)(~ADC2_CR1_CONT);
  }
  
  /* Clear the ADC2 channels */
  ADC2->CSR &= (uint8_t)(~ADC2_CSR_CH);
  /* Select the ADC2 channel */
  ADC2->CSR |= (uint8_t)(ADC2_Channel);
}

/**
  * @brief  Configure the ADC2 conversion on external trigger event.
  * @par Full description:
  * The selected external trigger event can be enabled or disabled.
  * @param   ADC2_ExtTrigger to select the External trigger event.
  * can have one of the values of @ref ADC2_ExtTrig_TypeDef.
  * @param   NewState to enable/disable the selected external trigger
  * can have one of the values of @ref FunctionalState.
  * @retval None
  */
void ADC2_ExternalTriggerConfig(ADC2_ExtTrig_TypeDef ADC2_ExtTrigger, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_ADC2_EXTTRIG_OK(ADC2_ExtTrigger));
  assert_param(IS_FUNCTIONALSTATE_OK(NewState));
  
  /* Clear the external trigger selection bits */
  ADC2->CR2 &= (uint8_t)(~ADC2_CR2_EXTSEL);
  
  if (NewState != DISABLE)
  {
    /* Enable the selected external Trigger */
    ADC2->CR2 |= (uint8_t)(ADC2_CR2_EXTTRIG);
  }
  else /* NewState == DISABLE */
  {
    /* Disable the selected external trigger */
    ADC2->CR2 &= (uint8_t)(~ADC2_CR2_EXTTRIG);
  }
  
  /* Set the selected external trigger */
  ADC2->CR2 |= (uint8_t)(ADC2_ExtTrigger);
}

/**
  * @brief  Start ADC2 conversion
  * @par Full description:
  * This function  triggers the start of conversion, after ADC2 configuration.
  * @param  None
  * @retval None
  * @par Required preconditions:
  * Enable the ADC2 peripheral before calling this function
  */
void ADC2_StartConversion(void)
{
  ADC2->CR1 |= ADC2_CR1_ADON;
}

/**
  * @brief  Get one sample of measured signal.
  * @param  None
  * @retval ConversionValue:  value of the measured signal.
  * @par Required preconditions:
  * ADC2 conversion finished.
  */
uint16_t ADC2_GetConversionValue(void)
{
  uint16_t temph = 0;
  uint8_t templ = 0;
  
  if ((ADC2->CR2 & ADC2_CR2_ALIGN) != 0) /* Right alignment */
  {
    /* Read LSB first */
    templ = ADC2->DRL;
    /* Then read MSB */
    temph = ADC2->DRH;
    
    temph = (uint16_t)(templ | (uint16_t)(temph << (uint8_t)8));
  }
  else /* Left alignment */
  {
    /* Read MSB first*/
    temph = ADC2->DRH;
    /* Then read LSB */
    templ = ADC2->DRL;
    
    temph = (uint16_t)((uint16_t)((uint16_t)templ << 6) | (uint16_t)((uint16_t)temph << 8));
  }
  
  return ((uint16_t)temph);
}

/**
  * @brief  Checks the ADC2 EOC flag status.
  * @param  None
  * @retval FlagStatus Status of the ADC2 EOC flag.
  */
FlagStatus ADC2_GetFlagStatus(void)
{
  /* Get EOC  flag status */
  return (FlagStatus)(ADC2->CSR & ADC2_CSR_EOC);
}

/**
  * @brief  Clear the ADC2 EOC Flag.
  * @param  None
  * @retval None
  */
void ADC2_ClearFlag(void)
{
  ADC2->CSR &= (uint8_t)(~ADC2_CSR_EOC);
}

/**
  * @brief  Returns the EOC  pending bit status
 * @par Parameters:
  * None
  * @retval FlagStatus: status of the EOC pending bit.
  */
ITStatus ADC2_GetITStatus(void)
{
  return (ITStatus)(ADC2->CSR & ADC2_CSR_EOC);
}

/**
  * @brief  Clear the ADC2 End of Conversion pending bit.
  * @param  None
  * @retval None
  */
void ADC2_ClearITPendingBit(void)
{
  ADC2->CSR &= (uint8_t)(~ADC2_CSR_EOC);
}

/**
  * @}
  */
  
/**
  * @}
  */
  

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/