You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
445 lines
18 KiB
445 lines
18 KiB
8 years ago
|
/**
|
||
|
|
********************************************************************************
|
||
|
|
* @file stm8s_uart4.h
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @version V2.2.0
|
||
|
|
* @date 30-September-2014
|
||
|
|
* @brief This file contains all functions prototypes and macros for the UART4 peripheral.
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
|
||
|
|
*
|
||
|
|
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
|
||
|
|
* You may not use this file except in compliance with the License.
|
||
|
|
* You may obtain a copy of the License at:
|
||
|
|
*
|
||
|
|
* http://www.st.com/software_license_agreement_liberty_v2
|
||
|
|
*
|
||
|
|
* Unless required by applicable law or agreed to in writing, software
|
||
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
||
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||
|
|
* See the License for the specific language governing permissions and
|
||
|
|
* limitations under the License.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||
|
|
#ifndef __STM8S_UART4_H
|
||
|
|
#define __STM8S_UART4_H
|
||
|
|
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "stm8s.h"
|
||
|
|
|
||
|
|
/** @addtogroup STM8S_StdPeriph_Driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported types ------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/** @addtogroup UART4_Exported_Types
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief UART4 Irda Modes
|
||
|
|
*/
|
||
|
|
|
||
|
|
typedef enum { UART4_IRDAMODE_NORMAL = (uint8_t)0x00, /**< 0x00 Irda Normal Mode */
|
||
|
|
UART4_IRDAMODE_LOWPOWER = (uint8_t)0x01 /**< 0x01 Irda Low Power Mode */
|
||
|
|
|
||
|
|
} UART4_IrDAMode_TypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief UART4 WakeUP Modes
|
||
|
|
*/
|
||
|
|
|
||
|
|
typedef enum { UART4_WAKEUP_IDLELINE = (uint8_t)0x00, /**< 0x01 Idle Line wake up */
|
||
|
|
UART4_WAKEUP_ADDRESSMARK = (uint8_t)0x08 /**< 0x02 Address Mark wake up */
|
||
|
|
} UART4_WakeUp_TypeDef;
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief UART4 LIN Break detection length possible values
|
||
|
|
*/
|
||
|
|
typedef enum { UART4_LINBREAKDETECTIONLENGTH_10BITS = (uint8_t)0x00, /**< 0x01 10 bits Lin Break detection */
|
||
|
|
UART4_LINBREAKDETECTIONLENGTH_11BITS = (uint8_t)0x01 /**< 0x02 11 bits Lin Break detection */
|
||
|
|
} UART4_LINBreakDetectionLength_TypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief UART4 stop bits possible values
|
||
|
|
*/
|
||
|
|
|
||
|
|
typedef enum { UART4_STOPBITS_1 = (uint8_t)0x00, /**< One stop bit is transmitted at the end of frame*/
|
||
|
|
UART4_STOPBITS_0_5 = (uint8_t)0x10, /**< Half stop bits is transmitted at the end of frame*/
|
||
|
|
UART4_STOPBITS_2 = (uint8_t)0x20, /**< Two stop bits are transmitted at the end of frame*/
|
||
|
|
UART4_STOPBITS_1_5 = (uint8_t)0x30 /**< One and half stop bits*/
|
||
|
|
} UART4_StopBits_TypeDef;
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief UART4 parity possible values
|
||
|
|
*/
|
||
|
|
typedef enum { UART4_PARITY_NO = (uint8_t)0x00, /**< No Parity*/
|
||
|
|
UART4_PARITY_EVEN = (uint8_t)0x04, /**< Even Parity*/
|
||
|
|
UART4_PARITY_ODD = (uint8_t)0x06 /**< Odd Parity*/
|
||
|
|
} UART4_Parity_TypeDef;
|
||
|
|
/**
|
||
|
|
* @brief UART4 Mode possible values
|
||
|
|
*/
|
||
|
|
typedef enum { UART4_LIN_MODE_MASTER = (uint8_t)0x00, /**< LIN Master Mode*/
|
||
|
|
UART4_LIN_MODE_SLAVE = (uint8_t)0x01 /**< LIN Slave Mode*/
|
||
|
|
} UART4_LinMode_TypeDef;
|
||
|
|
/**
|
||
|
|
* @brief UART4 automatic resynchronisation possible values
|
||
|
|
*/
|
||
|
|
typedef enum { UART4_LIN_AUTOSYNC_DISABLE = (uint8_t)0x00, /**< LIN Autosynchronization Disable*/
|
||
|
|
UART4_LIN_AUTOSYNC_ENABLE = (uint8_t)0x01 /**< LIN Autosynchronization Enable*/
|
||
|
|
} UART4_LinAutosync_TypeDef;
|
||
|
|
/**
|
||
|
|
* @brief UART4 Divider Update Method possible values
|
||
|
|
*/
|
||
|
|
typedef enum { UART4_LIN_DIVUP_LBRR1 = (uint8_t)0x00, /**< LIN LDIV is updated as soon as LBRR1 is written*/
|
||
|
|
UART4_LIN_DIVUP_NEXTRXNE = (uint8_t)0x01 /**< LIN LDIV is updated at the next received character*/
|
||
|
|
} UART4_LinDivUp_TypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief UART4 Synchrone modes
|
||
|
|
*/
|
||
|
|
typedef enum { UART4_SYNCMODE_CLOCK_DISABLE = (uint8_t)0x80, /**< 0x80 Sync mode Disable, SLK pin Disable */
|
||
|
|
UART4_SYNCMODE_CLOCK_ENABLE = (uint8_t)0x08, /**< 0x08 Sync mode Enable, SLK pin Enable */
|
||
|
|
UART4_SYNCMODE_CPOL_LOW = (uint8_t)0x40, /**< 0x40 Steady low value on SCLK pin outside transmission window */
|
||
|
|
UART4_SYNCMODE_CPOL_HIGH = (uint8_t)0x04, /**< 0x04 Steady high value on SCLK pin outside transmission window */
|
||
|
|
UART4_SYNCMODE_CPHA_MIDDLE = (uint8_t)0x20, /**< 0x20 SCLK clock line activated in middle of data bit */
|
||
|
|
UART4_SYNCMODE_CPHA_BEGINING = (uint8_t)0x02, /**< 0x02 SCLK clock line activated at beginning of data bit */
|
||
|
|
UART4_SYNCMODE_LASTBIT_DISABLE = (uint8_t)0x10, /**< 0x10 The clock pulse of the last data bit is not output to the SCLK pin */
|
||
|
|
UART4_SYNCMODE_LASTBIT_ENABLE = (uint8_t)0x01 /**< 0x01 The clock pulse of the last data bit is output to the SCLK pin */
|
||
|
|
} UART4_SyncMode_TypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief UART4 Word length possible values
|
||
|
|
*/
|
||
|
|
typedef enum { UART4_WORDLENGTH_8D = (uint8_t)0x00,/**< 0x00 8 bits Data */
|
||
|
|
UART4_WORDLENGTH_9D = (uint8_t)0x10 /**< 0x10 9 bits Data */
|
||
|
|
} UART4_WordLength_TypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief UART4 Mode possible values
|
||
|
|
*/
|
||
|
|
typedef enum { UART4_MODE_RX_ENABLE = (uint8_t)0x08, /**< 0x08 Receive Enable */
|
||
|
|
UART4_MODE_TX_ENABLE = (uint8_t)0x04, /**< 0x04 Transmit Enable */
|
||
|
|
UART4_MODE_TX_DISABLE = (uint8_t)0x80, /**< 0x80 Transmit Disable */
|
||
|
|
UART4_MODE_RX_DISABLE = (uint8_t)0x40, /**< 0x40 Single-wire Half-duplex mode */
|
||
|
|
UART4_MODE_TXRX_ENABLE = (uint8_t)0x0C /**< 0x0C Transmit Enable and Receive Enable */
|
||
|
|
} UART4_Mode_TypeDef;
|
||
|
|
/**
|
||
|
|
* @brief UART4 Flag possible values
|
||
|
|
*/
|
||
|
|
typedef enum
|
||
|
|
{
|
||
|
|
UART4_FLAG_TXE = (uint16_t)0x0080, /*!< Transmit Data Register Empty flag */
|
||
|
|
UART4_FLAG_TC = (uint16_t)0x0040, /*!< Transmission Complete flag */
|
||
|
|
UART4_FLAG_RXNE = (uint16_t)0x0020, /*!< Read Data Register Not Empty flag */
|
||
|
|
UART4_FLAG_IDLE = (uint16_t)0x0010, /*!< Idle line detected flag */
|
||
|
|
UART4_FLAG_OR_LHE = (uint16_t)0x0008, /*!< OverRun error flag */
|
||
|
|
UART4_FLAG_NF = (uint16_t)0x0004, /*!< Noise error flag */
|
||
|
|
UART4_FLAG_FE = (uint16_t)0x0002, /*!< Framing Error flag */
|
||
|
|
UART4_FLAG_PE = (uint16_t)0x0001, /*!< Parity Error flag */
|
||
|
|
UART4_FLAG_SBK = (uint16_t)0x0101, /**< Send Break Complete interrupt flag */
|
||
|
|
UART4_FLAG_LBDF = (uint16_t)0x0210, /**< LIN Break Detection Flag */
|
||
|
|
UART4_FLAG_LHDF = (uint16_t)0x0302, /**< LIN Header Detection Flag*/
|
||
|
|
UART4_FLAG_LSF = (uint16_t)0x0301 /**< LIN Sync Field Flag*/
|
||
|
|
} UART4_Flag_TypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief UART4 Interrupt definition
|
||
|
|
* UART4_IT possible values
|
||
|
|
* Elements values convention: 0xZYX
|
||
|
|
* X: Position of the corresponding Interrupt
|
||
|
|
* - For the following values, X means the interrupt position in the CR2 register.
|
||
|
|
* UART4_IT_TXE
|
||
|
|
* UART4_IT_TC
|
||
|
|
* UART4_IT_RXNE
|
||
|
|
* UART4_IT_IDLE
|
||
|
|
* UART4_IT_OR
|
||
|
|
* - For the UART4_IT_PE value, X means the flag position in the CR1 register.
|
||
|
|
* - For the UART4_IT_LBDF value, X means the flag position in the CR4 register.
|
||
|
|
* - For the UART4_IT_LHDF value, X means the flag position in the CR6 register.
|
||
|
|
* Y: Flag position
|
||
|
|
* - For the following values, Y means the flag (pending bit) position in the SR register.
|
||
|
|
* UART4_IT_TXE
|
||
|
|
* UART4_IT_TC
|
||
|
|
* UART4_IT_RXNE
|
||
|
|
* UART4_IT_IDLE
|
||
|
|
* UART4_IT_OR
|
||
|
|
* UART4_IT_PE
|
||
|
|
* - For the UART4_IT_LBDF value, Y means the flag position in the CR4 register.
|
||
|
|
* - For the UART4_IT_LHDF value, Y means the flag position in the CR6 register.
|
||
|
|
* Z: Register index: indicate in which register the dedicated interrupt source is:
|
||
|
|
* - 1==> CR1 register
|
||
|
|
* - 2==> CR2 register
|
||
|
|
* - 3==> CR4 register
|
||
|
|
* - 4==> CR6 register
|
||
|
|
*/
|
||
|
|
typedef enum { UART4_IT_TXE = (uint16_t)0x0277, /**< Transmit interrupt */
|
||
|
|
UART4_IT_TC = (uint16_t)0x0266, /**< Transmission Complete interrupt */
|
||
|
|
UART4_IT_RXNE = (uint16_t)0x0255, /**< Data Register Not Empty interrupt */
|
||
|
|
UART4_IT_IDLE = (uint16_t)0x0244, /**< Idle line detected interrupt */
|
||
|
|
UART4_IT_OR = (uint16_t)0x0235, /**< OverRun error interrupt */
|
||
|
|
UART4_IT_PE = (uint16_t)0x0100, /**< Parity Error interrupt */
|
||
|
|
UART4_IT_LBDF = (uint16_t)0x0346, /**< LIN Break Detection interrupt */
|
||
|
|
UART4_IT_LHDF = (uint16_t)0x0412, /**< LIN Header Detection interrupt*/
|
||
|
|
UART4_IT_RXNE_OR = (uint16_t)0x0205 /*!< Receive/Overrun interrupt */
|
||
|
|
} UART4_IT_TypeDef;
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported constants --------------------------------------------------------*/
|
||
|
|
/* Exported macros -----------------------------------------------------------*/
|
||
|
|
/* Private macros ------------------------------------------------------------*/
|
||
|
|
|
||
|
|
/** @addtogroup UART4_Private_Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert function to check the different functions parameters.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the different
|
||
|
|
* sensitivity values for the MODEs possible combination should be one of
|
||
|
|
* the following.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define IS_UART4_MODE_OK(Mode) \
|
||
|
|
(((Mode) == (uint8_t)UART4_MODE_RX_ENABLE) || \
|
||
|
|
((Mode) == (uint8_t)UART4_MODE_RX_DISABLE) || \
|
||
|
|
((Mode) == (uint8_t)UART4_MODE_TX_ENABLE) || \
|
||
|
|
((Mode) == (uint8_t)UART4_MODE_TX_DISABLE) || \
|
||
|
|
((Mode) == (uint8_t)UART4_MODE_TXRX_ENABLE) || \
|
||
|
|
((Mode) == (uint8_t)((uint8_t)UART4_MODE_TX_ENABLE|(uint8_t)UART4_MODE_RX_ENABLE)) || \
|
||
|
|
((Mode) == (uint8_t)((uint8_t)UART4_MODE_TX_ENABLE|(uint8_t)UART4_MODE_RX_DISABLE)) || \
|
||
|
|
((Mode) == (uint8_t)((uint8_t)UART4_MODE_TX_DISABLE|(uint8_t)UART4_MODE_RX_DISABLE)) || \
|
||
|
|
((Mode) == (uint8_t)((uint8_t)UART4_MODE_TX_DISABLE|(uint8_t)UART4_MODE_RX_ENABLE)))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the different
|
||
|
|
* sensitivity values for the WordLengths
|
||
|
|
*/
|
||
|
|
#define IS_UART4_WORDLENGTH_OK(WordLength) \
|
||
|
|
(((WordLength) == UART4_WORDLENGTH_8D) || \
|
||
|
|
((WordLength) == UART4_WORDLENGTH_9D))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the different
|
||
|
|
* sensitivity values for the SyncModes; it should exclude values such
|
||
|
|
* as UART4_CLOCK_ENABLE|UART4_CLOCK_DISABLE
|
||
|
|
*/
|
||
|
|
#define IS_UART4_SYNCMODE_OK(SyncMode) \
|
||
|
|
(!((((SyncMode)&(((uint8_t)UART4_SYNCMODE_CLOCK_ENABLE)|((uint8_t)UART4_SYNCMODE_CLOCK_DISABLE))) == (((uint8_t)UART4_SYNCMODE_CLOCK_ENABLE)|((uint8_t)UART4_SYNCMODE_CLOCK_DISABLE))) || \
|
||
|
|
(((SyncMode)&(((uint8_t)UART4_SYNCMODE_CPOL_LOW )|((uint8_t)UART4_SYNCMODE_CPOL_HIGH))) == (((uint8_t)UART4_SYNCMODE_CPOL_LOW )|((uint8_t)UART4_SYNCMODE_CPOL_HIGH))) || \
|
||
|
|
(((SyncMode)&(((uint8_t)UART4_SYNCMODE_CPHA_MIDDLE)|((uint8_t)UART4_SYNCMODE_CPHA_BEGINING))) == (((uint8_t)UART4_SYNCMODE_CPHA_MIDDLE)|((uint8_t)UART4_SYNCMODE_CPHA_BEGINING))) || \
|
||
|
|
(((SyncMode)&(((uint8_t)UART4_SYNCMODE_LASTBIT_DISABLE)|((uint8_t)UART4_SYNCMODE_LASTBIT_ENABLE))) == (((uint8_t)UART4_SYNCMODE_LASTBIT_DISABLE)|((uint8_t)UART4_SYNCMODE_LASTBIT_ENABLE)))))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the
|
||
|
|
* different sensitivity values for the FLAGs
|
||
|
|
*/
|
||
|
|
#define IS_UART4_FLAG_OK(Flag) \
|
||
|
|
(((Flag) == UART4_FLAG_TXE) || \
|
||
|
|
((Flag) == UART4_FLAG_TC) || \
|
||
|
|
((Flag) == UART4_FLAG_RXNE) || \
|
||
|
|
((Flag) == UART4_FLAG_IDLE) || \
|
||
|
|
((Flag) == UART4_FLAG_OR_LHE) || \
|
||
|
|
((Flag) == UART4_FLAG_NF) || \
|
||
|
|
((Flag) == UART4_FLAG_FE) || \
|
||
|
|
((Flag) == UART4_FLAG_PE) || \
|
||
|
|
((Flag) == UART4_FLAG_SBK) || \
|
||
|
|
((Flag) == UART4_FLAG_LSF) || \
|
||
|
|
((Flag) == UART4_FLAG_LHDF) || \
|
||
|
|
((Flag) == UART4_FLAG_LBDF))
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the
|
||
|
|
* different sensitivity values for the FLAGs that can be cleared by writing 0
|
||
|
|
*/
|
||
|
|
#define IS_UART4_CLEAR_FLAG_OK(Flag) \
|
||
|
|
(((Flag) == UART4_FLAG_RXNE) || \
|
||
|
|
((Flag) == UART4_FLAG_LHDF) || \
|
||
|
|
((Flag) == UART4_FLAG_LSF) || \
|
||
|
|
((Flag) == UART4_FLAG_LBDF))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check
|
||
|
|
* the different sensitivity values for the Interrupts
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define IS_UART4_CONFIG_IT_OK(Interrupt) \
|
||
|
|
(((Interrupt) == UART4_IT_PE) || \
|
||
|
|
((Interrupt) == UART4_IT_TXE) || \
|
||
|
|
((Interrupt) == UART4_IT_TC) || \
|
||
|
|
((Interrupt) == UART4_IT_RXNE_OR ) || \
|
||
|
|
((Interrupt) == UART4_IT_IDLE) || \
|
||
|
|
((Interrupt) == UART4_IT_LHDF) || \
|
||
|
|
((Interrupt) == UART4_IT_LBDF))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert function in order to check the different
|
||
|
|
* sensitivity values for the pending bit
|
||
|
|
*/
|
||
|
|
#define IS_UART4_GET_IT_OK(ITPendingBit) \
|
||
|
|
(((ITPendingBit) == UART4_IT_TXE) || \
|
||
|
|
((ITPendingBit) == UART4_IT_TC) || \
|
||
|
|
((ITPendingBit) == UART4_IT_RXNE) || \
|
||
|
|
((ITPendingBit) == UART4_IT_IDLE) || \
|
||
|
|
((ITPendingBit) == UART4_IT_OR) || \
|
||
|
|
((ITPendingBit) == UART4_IT_LBDF) || \
|
||
|
|
((ITPendingBit) == UART4_IT_LHDF) || \
|
||
|
|
((ITPendingBit) == UART4_IT_PE))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert function in order to check the different
|
||
|
|
* sensitivity values for the pending bit that can be cleared by writing 0
|
||
|
|
*/
|
||
|
|
#define IS_UART4_CLEAR_IT_OK(ITPendingBit) \
|
||
|
|
(((ITPendingBit) == UART4_IT_RXNE) || \
|
||
|
|
((ITPendingBit) == UART4_IT_LHDF) || \
|
||
|
|
((ITPendingBit) == UART4_IT_LBDF))
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the different
|
||
|
|
* sensitivity values for the IrDAModes
|
||
|
|
*/
|
||
|
|
#define IS_UART4_IRDAMODE_OK(IrDAMode) \
|
||
|
|
(((IrDAMode) == UART4_IRDAMODE_LOWPOWER) || \
|
||
|
|
((IrDAMode) == UART4_IRDAMODE_NORMAL))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the different
|
||
|
|
* sensitivity values for the WakeUps
|
||
|
|
*/
|
||
|
|
#define IS_UART4_WAKEUP_OK(WakeUp) \
|
||
|
|
(((WakeUp) == UART4_WAKEUP_IDLELINE) || \
|
||
|
|
((WakeUp) == UART4_WAKEUP_ADDRESSMARK))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the different
|
||
|
|
* sensitivity values for the LINBreakDetectionLengths
|
||
|
|
*/
|
||
|
|
#define IS_UART4_LINBREAKDETECTIONLENGTH_OK(LINBreakDetectionLength) \
|
||
|
|
(((LINBreakDetectionLength) == UART4_LINBREAKDETECTIONLENGTH_10BITS) || \
|
||
|
|
((LINBreakDetectionLength) == UART4_LINBREAKDETECTIONLENGTH_11BITS))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the different
|
||
|
|
* sensitivity values for the UART4_StopBits
|
||
|
|
*/
|
||
|
|
#define IS_UART4_STOPBITS_OK(StopBit) (((StopBit) == UART4_STOPBITS_1) || \
|
||
|
|
((StopBit) == UART4_STOPBITS_0_5) || \
|
||
|
|
((StopBit) == UART4_STOPBITS_2) || \
|
||
|
|
((StopBit) == UART4_STOPBITS_1_5 ))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the different
|
||
|
|
* sensitivity values for the Paritys
|
||
|
|
*/
|
||
|
|
#define IS_UART4_PARITY_OK(Parity) (((Parity) == UART4_PARITY_NO) || \
|
||
|
|
((Parity) == UART4_PARITY_EVEN) || \
|
||
|
|
((Parity) == UART4_PARITY_ODD ))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the maximum
|
||
|
|
* baudrate value
|
||
|
|
*/
|
||
|
|
#define IS_UART4_BAUDRATE_OK(NUM) ((NUM) <= (uint32_t)625000)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the address
|
||
|
|
* of the UART4 or UART node
|
||
|
|
*/
|
||
|
|
#define UART4_ADDRESS_MAX ((uint8_t)16)
|
||
|
|
#define IS_UART4_ADDRESS_OK(node) ((node) < UART4_ADDRESS_MAX )
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the LIN mode
|
||
|
|
*/
|
||
|
|
#define IS_UART4_SLAVE_OK(Mode) \
|
||
|
|
(((Mode) == UART4_LIN_MODE_MASTER) || \
|
||
|
|
((Mode) == UART4_LIN_MODE_SLAVE))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the LIN
|
||
|
|
* automatic resynchronization mode
|
||
|
|
*/
|
||
|
|
#define IS_UART4_AUTOSYNC_OK(AutosyncMode) \
|
||
|
|
(((AutosyncMode) == UART4_LIN_AUTOSYNC_ENABLE) || \
|
||
|
|
((AutosyncMode) == UART4_LIN_AUTOSYNC_DISABLE))
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Macro used by the assert_param function in order to check the LIN divider update method
|
||
|
|
*/
|
||
|
|
#define IS_UART4_DIVUP_OK(DivupMethod) \
|
||
|
|
(((DivupMethod) == UART4_LIN_DIVUP_LBRR1) || \
|
||
|
|
((DivupMethod) == UART4_LIN_DIVUP_NEXTRXNE))
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Exported functions ------------------------------------------------------- */
|
||
|
|
|
||
|
|
/** @addtogroup UART4_Exported_Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
void UART4_DeInit(void);
|
||
|
|
void UART4_Init(uint32_t BaudRate, UART4_WordLength_TypeDef WordLength,
|
||
|
|
UART4_StopBits_TypeDef StopBits, UART4_Parity_TypeDef Parity,
|
||
|
|
UART4_SyncMode_TypeDef SyncMode, UART4_Mode_TypeDef Mode);
|
||
|
|
void UART4_Cmd(FunctionalState NewState);
|
||
|
|
void UART4_ITConfig(UART4_IT_TypeDef UART4_IT, FunctionalState NewState);
|
||
|
|
void UART4_HalfDuplexCmd(FunctionalState NewState);
|
||
|
|
void UART4_IrDAConfig(UART4_IrDAMode_TypeDef UART4_IrDAMode);
|
||
|
|
void UART4_IrDACmd(FunctionalState NewState);
|
||
|
|
void UART4_LINBreakDetectionConfig(UART4_LINBreakDetectionLength_TypeDef UART4_LINBreakDetectionLength);
|
||
|
|
void UART4_LINConfig(UART4_LinMode_TypeDef UART4_Mode,
|
||
|
|
UART4_LinAutosync_TypeDef UART4_Autosync,
|
||
|
|
UART4_LinDivUp_TypeDef UART4_DivUp);
|
||
|
|
void UART4_LINCmd(FunctionalState NewState);
|
||
|
|
void UART4_SmartCardCmd(FunctionalState NewState);
|
||
|
|
void UART4_SmartCardNACKCmd(FunctionalState NewState);
|
||
|
|
void UART4_WakeUpConfig(UART4_WakeUp_TypeDef UART4_WakeUp);
|
||
|
|
void UART4_ReceiverWakeUpCmd(FunctionalState NewState);
|
||
|
|
uint8_t UART4_ReceiveData8(void);
|
||
|
|
uint16_t UART4_ReceiveData9(void);
|
||
|
|
void UART4_SendData8(uint8_t Data);
|
||
|
|
void UART4_SendData9(uint16_t Data);
|
||
|
|
void UART4_SendBreak(void);
|
||
|
|
void UART4_SetAddress(uint8_t UART4_Address);
|
||
|
|
void UART4_SetGuardTime(uint8_t UART4_GuardTime);
|
||
|
|
void UART4_SetPrescaler(uint8_t UART4_Prescaler);
|
||
|
|
FlagStatus UART4_GetFlagStatus(UART4_Flag_TypeDef UART4_FLAG);
|
||
|
|
void UART4_ClearFlag(UART4_Flag_TypeDef UART4_FLAG);
|
||
|
|
ITStatus UART4_GetITStatus(UART4_IT_TypeDef UART4_IT);
|
||
|
|
void UART4_ClearITPendingBit(UART4_IT_TypeDef UART4_IT);
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#endif /* __STM8S_UART4_H */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|