WIP meteostation with ESP8266
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 

198 lines
5.8 KiB

/**
* The MIT License (MIT)
*
* Copyright (c) 2016 sheinz (https://github.com/sheinz)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef __BMP280_H__
#define __BMP280_H__
#include <stdint.h>
#include <stdbool.h>
#include "i2c/i2c.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* Uncomment to enable debug output.
*/
// #define BMP280_DEBUG
/**
* BMP280 or BME280 address is 0x77 if SDO pin is high, and is 0x76 if
* SDO pin is low.
*/
#define BMP280_I2C_ADDRESS_0 0x76
#define BMP280_I2C_ADDRESS_1 0x77
#define BMP280_CHIP_ID 0x58 /* BMP280 has chip-id 0x58 */
#define BME280_CHIP_ID 0x60 /* BME280 has chip-id 0x60 */
/**
* Mode of BMP280 module operation.
* Forced - Measurement is initiated by user.
* Normal - Continues measurement.
*/
typedef enum {
BMP280_MODE_SLEEP = 0,
BMP280_MODE_FORCED = 1,
BMP280_MODE_NORMAL = 3
} BMP280_Mode;
typedef enum {
BMP280_FILTER_OFF = 0,
BMP280_FILTER_2 = 1,
BMP280_FILTER_4 = 2,
BMP280_FILTER_8 = 3,
BMP280_FILTER_16 = 4
} BMP280_Filter;
/**
* Pressure oversampling settings
*/
typedef enum {
BMP280_SKIPPED = 0, /* no measurement */
BMP280_ULTRA_LOW_POWER = 1, /* oversampling x1 */
BMP280_LOW_POWER = 2, /* oversampling x2 */
BMP280_STANDARD = 3, /* oversampling x4 */
BMP280_HIGH_RES = 4, /* oversampling x8 */
BMP280_ULTRA_HIGH_RES = 5 /* oversampling x16 */
} BMP280_Oversampling;
/**
* Stand by time between measurements in normal mode
*/
typedef enum {
BMP280_STANDBY_05 = 0, /* stand by time 0.5ms */
BMP280_STANDBY_62 = 1, /* stand by time 62.5ms */
BMP280_STANDBY_125 = 2, /* stand by time 125ms */
BMP280_STANDBY_250 = 3, /* stand by time 250ms */
BMP280_STANDBY_500 = 4, /* stand by time 500ms */
BMP280_STANDBY_1000 = 5, /* stand by time 1s */
BMP280_STANDBY_2000 = 6, /* stand by time 2s BMP280, 10ms BME280 */
BMP280_STANDBY_4000 = 7, /* stand by time 4s BMP280, 20ms BME280 */
} BMP280_StandbyTime;
/**
* Configuration parameters for BMP280 module.
* Use function bmp280_init_default_params to use default configuration.
*/
typedef struct {
BMP280_Mode mode;
BMP280_Filter filter;
BMP280_Oversampling oversampling_pressure;
BMP280_Oversampling oversampling_temperature;
BMP280_Oversampling oversampling_humidity;
BMP280_StandbyTime standby;
} bmp280_params_t;
typedef struct {
uint16_t dig_T1;
int16_t dig_T2;
int16_t dig_T3;
uint16_t dig_P1;
int16_t dig_P2;
int16_t dig_P3;
int16_t dig_P4;
int16_t dig_P5;
int16_t dig_P6;
int16_t dig_P7;
int16_t dig_P8;
int16_t dig_P9;
/* Humidity compensation for BME280 */
uint8_t dig_H1;
int16_t dig_H2;
uint8_t dig_H3;
int16_t dig_H4;
int16_t dig_H5;
int8_t dig_H6;
i2c_dev_t i2c_dev; /* I2C dev setting. */
uint8_t id; /* Chip ID */
} bmp280_t;
/**
* Initialize default parameters.
* Default configuration:
* mode: NORAML
* filter: OFF
* oversampling: x4
* standby time: 250ms
*/
void bmp280_init_default_params(bmp280_params_t *params);
/**
* Initialize BMP280 module, probes for the device, soft resets the device,
* reads the calibration constants, and configures the device using the supplied
* parameters. Returns true on success otherwise false.
*
* The I2C address is assumed to have been initialized in the dev, and
* may be either BMP280_I2C_ADDRESS_0 or BMP280_I2C_ADDRESS_1. If the I2C
* address is unknown then try initializing each in turn.
*
* This may be called again to soft reset the device and initialize it again.
*/
bool bmp280_init(bmp280_t *dev, bmp280_params_t *params);
/**
* Start measurement in forced mode.
* The module remains in forced mode after this call.
* Do not call this method in normal mode.
*/
bool bmp280_force_measurement(bmp280_t *dev);
/**
* Check if BMP280 is busy with measuring temperature/pressure.
* Return true if BMP280 is busy.
*/
bool bmp280_is_measuring(bmp280_t *dev);
/**
* Read compensated temperature and pressure data:
*
* Temperature in degrees Celsius times 100.
*
* Pressure in Pascals in fixed point 24 bit integer 8 bit fraction format.
*
* Humidity is optional and only read for the BME280, in percent relative
* humidity as a fixed point 22 bit interger and 10 bit fraction format.
*/
bool bmp280_read_fixed(bmp280_t *dev, int32_t *temperature,
uint32_t *pressure, uint32_t *humidity);
/**
* Read compensated temperature and pressure data:
* Temperature in degrees Celsius.
* Pressure in Pascals.
* Humidity is optional and only read for the BME280, in percent relative
* humidity.
*/
bool bmp280_read_float(bmp280_t *dev, float *temperature,
float *pressure, float *humidity);
#ifdef __cplusplus
}
#endif
#endif // __BMP280_H__