/**
 * The MIT License (MIT)
 *
 * Copyright (c) 2016 sheinz (https://github.com/sheinz)
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
#include <stddef.h>
#include "bmp280.h"

#ifdef BMP280_DEBUG
#include <stdio.h>
#define debug(fmt, ...) printf("%s" fmt "\n", "bmp280: ", ## __VA_ARGS__);
#else
#define debug(fmt, ...)
#endif

/**
 * BMP280 registers
 */
#define BMP280_REG_TEMP_XLSB   0xFC /* bits: 7-4 */
#define BMP280_REG_TEMP_LSB    0xFB
#define BMP280_REG_TEMP_MSB    0xFA
#define BMP280_REG_TEMP        (BMP280_REG_TEMP_MSB)
#define BMP280_REG_PRESS_XLSB  0xF9 /* bits: 7-4 */
#define BMP280_REG_PRESS_LSB   0xF8
#define BMP280_REG_PRESS_MSB   0xF7
#define BMP280_REG_PRESSURE    (BMP280_REG_PRESS_MSB)
#define BMP280_REG_CONFIG      0xF5 /* bits: 7-5 t_sb; 4-2 filter; 0 spi3w_en */
#define BMP280_REG_CTRL        0xF4 /* bits: 7-5 osrs_t; 4-2 osrs_p; 1-0 mode */
#define BMP280_REG_STATUS      0xF3 /* bits: 3 measuring; 0 im_update */
#define BMP280_REG_CTRL_HUM    0xF2 /* bits: 2-0 osrs_h; */
#define BMP280_REG_RESET       0xE0
#define BMP280_REG_ID          0xD0
#define BMP280_REG_CALIB       0x88
#define BMP280_REG_HUM_CALIB   0x88


#define BMP280_RESET_VALUE     0xB6


void bmp280_init_default_params(bmp280_params_t *params)
{
    params->mode = BMP280_MODE_NORMAL;
    params->filter = BMP280_FILTER_OFF;
    params->oversampling_pressure = BMP280_STANDARD;
    params->oversampling_temperature = BMP280_STANDARD;
    params->oversampling_humidity = BMP280_STANDARD;
    params->standby = BMP280_STANDBY_250;
}

static bool read_register16(i2c_dev_t *dev, uint8_t addr, uint16_t *value)
{
    uint8_t d[] = {0, 0};
    if (!i2c_slave_read(dev->bus, dev->addr, &addr, d, sizeof(d))) {
        *value = d[0] | (d[1] << 8);
        return true;
    }
    return false;
}

static inline int read_data(i2c_dev_t *dev, uint8_t addr, uint8_t *value, uint8_t len)
{
    return i2c_slave_read(dev->bus, dev->addr, &addr, value, len);
}

static bool read_calibration_data(bmp280_t *dev)
{

    if (read_register16(&dev->i2c_dev, 0x88, &dev->dig_T1) &&
        read_register16(&dev->i2c_dev, 0x8a, (uint16_t *)&dev->dig_T2) &&
        read_register16(&dev->i2c_dev, 0x8c, (uint16_t *)&dev->dig_T3) &&
        read_register16(&dev->i2c_dev, 0x8e, &dev->dig_P1) &&
        read_register16(&dev->i2c_dev, 0x90, (uint16_t *)&dev->dig_P2) &&
        read_register16(&dev->i2c_dev, 0x92, (uint16_t *)&dev->dig_P3) &&
        read_register16(&dev->i2c_dev, 0x94, (uint16_t *)&dev->dig_P4) &&
        read_register16(&dev->i2c_dev, 0x96, (uint16_t *)&dev->dig_P5) &&
        read_register16(&dev->i2c_dev, 0x98, (uint16_t *)&dev->dig_P6) &&
        read_register16(&dev->i2c_dev, 0x9a, (uint16_t *)&dev->dig_P7) &&
        read_register16(&dev->i2c_dev, 0x9c, (uint16_t *)&dev->dig_P8) &&
        read_register16(&dev->i2c_dev, 0x9e, (uint16_t *)&dev->dig_P9)) {

        debug("Calibration data received:");
        debug("dig_T1=%d", dev->dig_T1);
        debug("dig_T2=%d", dev->dig_T2);
        debug("dig_T3=%d", dev->dig_T3);
        debug("dig_P1=%d", dev->dig_P1);
        debug("dig_P2=%d", dev->dig_P2);
        debug("dig_P3=%d", dev->dig_P3);
        debug("dig_P4=%d", dev->dig_P4);
        debug("dig_P5=%d", dev->dig_P5);
        debug("dig_P6=%d", dev->dig_P6);
        debug("dig_P7=%d", dev->dig_P7);
        debug("dig_P8=%d", dev->dig_P8);
        debug("dig_P9=%d", dev->dig_P9);

        return true;
    }

    return false;
}

static bool read_hum_calibration_data(bmp280_t *dev)
{
    uint16_t h4, h5;

    if (!read_data(&dev->i2c_dev, 0xa1, &dev->dig_H1, 1) &&
        read_register16(&dev->i2c_dev, 0xe1, (uint16_t *)&dev->dig_H2) &&
        !read_data(&dev->i2c_dev, 0xe3, &dev->dig_H3, 1) &&
        read_register16(&dev->i2c_dev, 0xe4, &h4) &&
        read_register16(&dev->i2c_dev, 0xe5, &h5) &&
        !read_data(&dev->i2c_dev, 0xe7, (uint8_t *)&dev->dig_H6, 1)) {
        dev->dig_H4 = (h4 & 0x00ff) << 4 | (h4 & 0x0f00) >> 8;
        dev->dig_H5 = h5 >> 4;
        debug("Calibration data received:");
        debug("dig_H1=%d", dev->dig_H1);
        debug("dig_H2=%d", dev->dig_H2);
        debug("dig_H3=%d", dev->dig_H3);
        debug("dig_H4=%d", dev->dig_H4);
        debug("dig_H5=%d", dev->dig_H5);
        debug("dig_H6=%d", dev->dig_H6);
        return true;
    }

    return false;
}

static int write_register8(i2c_dev_t *dev, uint8_t addr, uint8_t value)
{
    return i2c_slave_write(dev->bus, dev->addr, &addr, &value, 1);
}

bool bmp280_init(bmp280_t *dev, bmp280_params_t *params)
{

    if (dev->i2c_dev.addr != BMP280_I2C_ADDRESS_0 && dev->i2c_dev.addr != BMP280_I2C_ADDRESS_1) {
        debug("Invalid I2C address");
        return false;
    }

    if (read_data(&dev->i2c_dev, BMP280_REG_ID, &dev->id, 1)) {
        debug("Sensor not found");
        return false;
    }

    if (dev->id != BMP280_CHIP_ID && dev->id != BME280_CHIP_ID) {
        debug("Sensor wrong version");
        return false;
    }

    // Soft reset.
    if (write_register8(&dev->i2c_dev, BMP280_REG_RESET, BMP280_RESET_VALUE)) {
        debug("Failed resetting sensor");
        return false;
    }

    // Wait until finished copying over the NVP data.
    while (1) {
        uint8_t status;
        if (!read_data(&dev->i2c_dev, BMP280_REG_STATUS, &status, 1) && (status & 1) == 0)
            break;
    }

    if (!read_calibration_data(dev)) {
        debug("Failed to read calibration data");
        return false;
    }

    if (dev->id == BME280_CHIP_ID && !read_hum_calibration_data(dev)) {
        debug("Failed to read humidity calibration data");
        return false;
    }

    uint8_t config = (params->standby << 5) | (params->filter << 2);
    debug("Writing config reg=%x", config);
    if (write_register8(&dev->i2c_dev, BMP280_REG_CONFIG, config)) {
        debug("Failed configuring sensor");
        return false;
    }

    if (params->mode == BMP280_MODE_FORCED) {
        params->mode = BMP280_MODE_SLEEP;  // initial mode for forced is sleep
    }

    uint8_t ctrl = (params->oversampling_temperature << 5) | (params->oversampling_pressure << 2)
        | (params->mode);


    if (dev->id == BME280_CHIP_ID) {
        // Write crtl hum reg first, only active after write to BMP280_REG_CTRL.
        uint8_t ctrl_hum = params->oversampling_humidity;
        debug("Writing ctrl hum reg=%x", ctrl_hum);
        if (write_register8(&dev->i2c_dev, BMP280_REG_CTRL_HUM, ctrl_hum)) {
            debug("Failed controlling sensor");
            return false;
        }
    }

    debug("Writing ctrl reg=%x", ctrl);
    if (write_register8(&dev->i2c_dev, BMP280_REG_CTRL, ctrl)) {
        debug("Failed controlling sensor");
        return false;
    }

    return true;
}

bool bmp280_force_measurement(bmp280_t *dev)
{
    uint8_t ctrl;
    if (read_data(&dev->i2c_dev, BMP280_REG_CTRL, &ctrl, 1))
        return false;
    ctrl &= ~0b11;  // clear two lower bits
    ctrl |= BMP280_MODE_FORCED;
    debug("Writing ctrl reg=%x", ctrl);
    if (write_register8(&dev->i2c_dev, BMP280_REG_CTRL, ctrl)) {
        debug("Failed starting forced mode");
        return false;
    }
    return true;
}

bool bmp280_is_measuring(bmp280_t *dev)
{
    uint8_t status;
    if (read_data(&dev->i2c_dev, BMP280_REG_STATUS, &status, 1))
        return false;
    if (status & (1 << 3)) {
        debug("Status: measuring");
        return true;
    }
    debug("Status: idle");
    return false;
}

/**
 * Compensation algorithm is taken from BMP280 datasheet.
 *
 * Return value is in degrees Celsius.
 */
static inline int32_t compensate_temperature(bmp280_t *dev,
                                             int32_t adc_temp, int32_t *fine_temp)
{
    int32_t var1, var2;

    var1 = ((((adc_temp >> 3) - ((int32_t)dev->dig_T1 << 1)))
            * (int32_t)dev->dig_T2) >> 11;
    var2 = (((((adc_temp >> 4) - (int32_t)dev->dig_T1)
              * ((adc_temp >> 4) - (int32_t)dev->dig_T1)) >> 12)
            * (int32_t)dev->dig_T3) >> 14;

    *fine_temp = var1 + var2;
    return (*fine_temp * 5 + 128) >> 8;
}

/**
 * Compensation algorithm is taken from BMP280 datasheet.
 *
 * Return value is in Pa, 24 integer bits and 8 fractional bits.
 */
static inline uint32_t compensate_pressure(bmp280_t *dev,
                                           int32_t adc_press, int32_t fine_temp)
{
    int64_t var1, var2, p;

    var1 = (int64_t)fine_temp - 128000;
    var2 = var1 * var1 * (int64_t)dev->dig_P6;
    var2 = var2 + ((var1 * (int64_t)dev->dig_P5) << 17);
    var2 = var2 + (((int64_t)dev->dig_P4) << 35);
    var1 = ((var1 * var1 * (int64_t)dev->dig_P3) >> 8) +
        ((var1 * (int64_t)dev->dig_P2) << 12);
    var1 = (((int64_t)1 << 47) + var1) * ((int64_t)dev->dig_P1) >> 33;

    if (var1 == 0) {
        return 0;  // avoid exception caused by division by zero
    }

    p = 1048576 - adc_press;
    p = (((p << 31) - var2) * 3125) / var1;
    var1 = ((int64_t)dev->dig_P9 * (p >> 13) * (p >> 13)) >> 25;
    var2 = ((int64_t)dev->dig_P8 * p) >> 19;

    p = ((p + var1 + var2) >> 8) + ((int64_t)dev->dig_P7 << 4);
    return p;
}

/**
 * Compensation algorithm is taken from BME280 datasheet.
 *
 * Return value is in Pa, 24 integer bits and 8 fractional bits.
 */
static inline uint32_t compensate_humidity(bmp280_t *dev,
                                           int32_t adc_hum, int32_t fine_temp)
{
    int32_t v_x1_u32r;

    v_x1_u32r = fine_temp - (int32_t)76800;
    v_x1_u32r = ((((adc_hum << 14) - ((int32_t)dev->dig_H4 << 20) -
                   ((int32_t)dev->dig_H5 * v_x1_u32r)) +
                  (int32_t)16384) >> 15) *
        (((((((v_x1_u32r * (int32_t)dev->dig_H6) >> 10) *
             (((v_x1_u32r * (int32_t)dev->dig_H3) >> 11) +
              (int32_t)32768)) >> 10) + (int32_t)2097152) *
          (int32_t)dev->dig_H2 + 8192) >> 14);
    v_x1_u32r = v_x1_u32r - (((((v_x1_u32r >> 15) * (v_x1_u32r >> 15)) >> 7) *
                              (int32_t)dev->dig_H1) >> 4);
    v_x1_u32r = v_x1_u32r < 0 ? 0 : v_x1_u32r;
    v_x1_u32r = v_x1_u32r > 419430400 ? 419430400 : v_x1_u32r;
    return v_x1_u32r >> 12;
}

bool bmp280_read_fixed(bmp280_t *dev, int32_t *temperature,
                       uint32_t *pressure, uint32_t *humidity)
{
    int32_t adc_pressure;
    int32_t adc_temp;
    uint8_t data[8];

    // Only the BME280 supports reading the humidity.
    if (dev->id != BME280_CHIP_ID) {
        if (humidity)
            *humidity = 0;
        humidity = NULL;
    }

    // Need to read in one sequence to ensure they match.
    size_t size = humidity ? 8 : 6;
    if (read_data(&dev->i2c_dev, 0xf7, data, size)) {
        debug("Failed reading");
        return false;
    }

    adc_pressure = data[0] << 12 | data[1] << 4 | data[2] >> 4;
    adc_temp = data[3] << 12 | data[4] << 4 | data[5] >> 4;
    debug("ADC temperature: %d", adc_temp);
    debug("ADC pressure: %d", adc_pressure);

    int32_t fine_temp;
    *temperature = compensate_temperature(dev, adc_temp, &fine_temp);
    *pressure = compensate_pressure(dev, adc_pressure, fine_temp);

    if (humidity) {
        int32_t adc_humidity = data[6] << 8 | data[7];
        debug("ADC humidity: %d", adc_humidity);
        *humidity = compensate_humidity(dev, adc_humidity, fine_temp);
    }

    return true;
}

bool bmp280_read_float(bmp280_t *dev, float *temperature,
                       float *pressure, float *humidity)
{
    int32_t fixed_temperature;
    uint32_t fixed_pressure;
    uint32_t fixed_humidity;
    if (bmp280_read_fixed(dev, &fixed_temperature, &fixed_pressure,
                          humidity ? &fixed_humidity : NULL)) {
        *temperature = (float)fixed_temperature/100;
        *pressure = (float)fixed_pressure/256;
        if (humidity)
            *humidity = (float)fixed_humidity/1024;
        return true;
    }

    return false;
}