recuperator fan control with esp32
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
esp-recuperator/main/irblast.c

108 lines
3.5 KiB

/* Hello World Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <stdio.h>
#include "sdkconfig.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_system.h"
#include "esp_spi_flash.h"
#include "driver/ledc.h"
#include "irblast.h"
static portMUX_TYPE mux_irblast;
#define CMDLEN 4
static const uint8_t COMMANDS[][CMDLEN] = {
[IRBLAST_ONOFF] = {0b10000000, 0b01111111, 0b00000000, 0b11111111},
[IRBLAST_DAYNIGHT] = {0b10000000, 0b01111111, 0b10000000, 0b01111111},
[IRBLAST_SPEED1] = {0b10000000, 0b01111111, 0b10101000, 0b01010111},
[IRBLAST_SPEED2] = {0b10000000, 0b01111111, 0b01101000, 0b10010111},
[IRBLAST_SPEED3] = {0b10000000, 0b01111111, 0b00101000, 0b11010111},
[IRBLAST_MODE1] = {0b10000000, 0b01111111, 0b00011000, 0b11100111},
[IRBLAST_MODE2] = {0b10000000, 0b01111111, 0b10011000, 0b01100111},
[IRBLAST_MODE3] = {0b10000000, 0b01111111, 0b00001000, 0b11110111},
[IRBLAST_MODE4] = {0b10000000, 0b01111111, 0b10001000, 0b01110111},
[IRBLAST_HUM1] = {0b10000000, 0b01111111, 0b00010000, 0b11101111},
[IRBLAST_HUM2] = {0b10000000, 0b01111111, 0b01010000, 0b10101111},
[IRBLAST_HUM3] = {0b10000000, 0b01111111, 0b10010000, 0b01101111},
};
void irblast_setup() {
vPortCPUInitializeMutex(&mux_irblast);
ledc_timer_config_t ledc_timer = {
.duty_resolution = LEDC_TIMER_8_BIT, // resolution of PWM duty
.freq_hz = 38500, // frequency of PWM signal
.speed_mode = LEDC_HIGH_SPEED_MODE, // timer mode
.timer_num = LEDC_TIMER_0, // timer index
.clk_cfg = LEDC_AUTO_CLK, // Auto select the source clock
};
// Set configuration of timer0 for high speed channels
ledc_timer_config(&ledc_timer);
ledc_channel_config_t chan = {
.channel = LEDC_CHANNEL_0,
.duty = 127,
.gpio_num = CONFIG_PIN_IRLED,
.speed_mode = LEDC_HIGH_SPEED_MODE,
.hpoint = 0,
.timer_sel = LEDC_TIMER_0
};
ledc_channel_config(&chan);
}
static inline void pwm_on() {
ledc_set_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 127);
ledc_update_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0);
}
static inline void pwm_off() {
ledc_stop(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 0);
}
void irblast_send(enum irblast_cmd cmd) {
const uint8_t *bytes = COMMANDS[cmd];
portENTER_CRITICAL(&mux_irblast);
// Preamble
pwm_on();
ets_delay_us(9000);
pwm_off();
ets_delay_us(4500);
for (int i = 0; i < CMDLEN; i++) {
uint8_t byte = bytes[i];
for (int j = 0; j < 8; j++) {
if ((byte & 0x80) == 0) {
pwm_on();
ets_delay_us(588);
pwm_off();
ets_delay_us(540);
} else {
pwm_on();
ets_delay_us(590);
pwm_off();
ets_delay_us(1672);
}
byte <<= 1;
}
}
// one "1" at the end, for some reason
pwm_on();
ets_delay_us(600);
pwm_off();
portEXIT_CRITICAL(&mux_irblast);
vTaskDelay(pdMS_TO_TICKS(1000));
}