IR blaster with esp32, WIP
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
esp-irblaster/main/hello_world_main.c

91 lines
2.4 KiB

3 years ago
/* Hello World Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <stdio.h>
#include "sdkconfig.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_system.h"
#include "esp_spi_flash.h"
#include "driver/ledc.h"
void app_main(void)
{
printf("Hello world!\n");
/*
* Prepare and set configuration of timers
* that will be used by LED Controller
*/
ledc_timer_config_t ledc_timer = {
.duty_resolution = LEDC_TIMER_8_BIT, // resolution of PWM duty
.freq_hz = 38500, // frequency of PWM signal
.speed_mode = LEDC_HIGH_SPEED_MODE, // timer mode
.timer_num = LEDC_TIMER_0, // timer index
.clk_cfg = LEDC_AUTO_CLK, // Auto select the source clock
};
// Set configuration of timer0 for high speed channels
ledc_timer_config(&ledc_timer);
ledc_channel_config_t chan = {
.channel = LEDC_CHANNEL_0,
.duty = 127,
.gpio_num = 17,
.speed_mode = LEDC_HIGH_SPEED_MODE,
.hpoint = 0,
.timer_sel = LEDC_TIMER_0
};
ledc_channel_config(&chan);
#define PWM_ON() do { \
ledc_set_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 127); \
ledc_update_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0); \
} while(0)
#define PWM_OFF() do { \
ledc_stop(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 0); \
} while(0)
while (1) {
//const uint8_t bytes[4] = {0b10000000, 0b01111111, 0b00010000, 0b11101111}; // and one 1 at the end
const uint8_t bytes[4] = {0b10000000 , 0b01111111 , 0b00000000 , 0b11111111}; // and one 1 at the end
// Preamble
PWM_ON();
ets_delay_us(9000);
PWM_OFF();
ets_delay_us(4500);
for (int i = 0; i < 4; i++) {
uint8_t byte = bytes[i];
for (int j = 0; j < 8; j++) {
bool bit = 0 != (byte & 0x80);
byte <<= 1;
if (bit==0) {
PWM_ON();
ets_delay_us(588);
PWM_OFF();
ets_delay_us(540);
} else {
PWM_ON();
ets_delay_us(590);
PWM_OFF();
ets_delay_us(1672);
}
}
}
PWM_ON();
ets_delay_us(600);
PWM_OFF();
ets_delay_us(1700);
vTaskDelay(pdMS_TO_TICKS(1000));
}
}