onewire test project

master
Ondřej Hruška 9 years ago
parent 13fa5b1e0a
commit 6adfd7b8ec
  1. 141
      projects/onewire_test/Makefile
  2. 87
      projects/onewire_test/lib/calc.h
  3. 276
      projects/onewire_test/lib/iopins.c
  4. 213
      projects/onewire_test/lib/iopins.h
  5. 235
      projects/onewire_test/lib/onewire.h
  6. 213
      projects/onewire_test/lib/stream.c
  7. 100
      projects/onewire_test/lib/stream.h
  8. 678
      projects/onewire_test/lib/uart.c
  9. 253
      projects/onewire_test/lib/uart.h
  10. 45
      projects/onewire_test/main.c
  11. BIN
      projects/uart_linux_client/client

@ -0,0 +1,141 @@
## === CPU settings ===
# CPU type
MCU = atmega328p
# CPU frequency
F_CPU = 16000000
# Fuses
LFUSE = 0xFF
HFUSE = 0xDE
EFUSE = 0x05
## === Source files ===
# Main C file
MAIN = main.c
# Extra C files in this folder
LOCAL_SOURCE =
# Library directory (with C files)
EXTRA_SOURCE_DIR = lib/
# C files in the library directory
EXTRA_SOURCE_FILES = uart.c iopins.c stream.c
## === Programmer ===
PROGRAMMER_TYPE = arduino
PROGRAMMER_ARGS = -b 57600 -P /dev/ttyUSB0
## === C flags ===
CFLAGS = -std=gnu99 -mmcu=$(MCU) -DF_CPU=$(F_CPU)UL -I. -I$(EXTRA_SOURCE_DIR)
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
CFLAGS += -Wall -Wno-main -Wno-strict-prototypes -Wno-comment
CFLAGS += -g2 -Wextra -Wfatal-errors -Wno-unused-but-set-variable
CFLAGS += -ffunction-sections -fdata-sections -Wl,--gc-sections -Wl,--relax
# CFLAGS += -lm ## Math
# CFLAGS += -Wl,-u,vfprintf -lprintf_flt -lm ## for floating-point printf
# CFLAGS += -Wl,-u,vfprintf -lprintf_min ## for smaller printf
CFLAGS_BUILD = $(CFLAGS) -Os
# ---------------------------------------------------------------------------
## Defined programs / locations
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
AVRSIZE = avr-size
AVRDUDE = avrdude
## === File lists ===
TARGET = $(strip $(basename $(MAIN)))
SRC1 = $(TARGET).c
SRC = $(SRC1)
EXTRA_SOURCE = $(addprefix $(EXTRA_SOURCE_DIR), $(EXTRA_SOURCE_FILES))
SRC += $(EXTRA_SOURCE)
SRC += $(LOCAL_SOURCE)
HEADERS = $(SRC:.c=.h)
OBJ = $(SRC:.c=.o)
## === File generation ===
all: $(TARGET).hex size
pre: $(TARGET).pre
%.hex: %.elf
$(OBJCOPY) -R .eeprom -O ihex $< $@
%.elf: $(SRC)
$(CC) $(CFLAGS_BUILD) $(SRC) --output $@
%.pre: $(SRC1)
$(CC) $(CFLAGS) -E $(SRC1) --output $@
%.eeprom: %.elf
$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O ihex $< $@
%.lst: %.elf
$(OBJDUMP) -S $< > $@
# Show debug info
debug:
@echo
@echo "Source files:" $(SRC)
@echo "MCU, F_CPU, BAUD:" $(MCU), $(F_CPU), $(BAUD)
@echo
# Disassemble the ELF
disassemble: $(TARGET).lst
dis: disassemble
lst: disassemble
# Make eeprom file
eeprom: $(TARGET).eeprom
# Show how big the resulting program is
size: $(TARGET).elf
$(AVRSIZE) -C --mcu=$(MCU) $(TARGET).elf
# Clean all produced trash
clean:
rm -f $(TARGET).elf $(TARGET).hex $(TARGET).obj \
$(TARGET).o $(TARGET).d $(TARGET).eep $(TARGET).lst \
$(TARGET).lss $(TARGET).sym $(TARGET).map $(TARGET)~ \
$(TARGET).eeprom
# Clean all trash
purge:
rm -f *.elf *.hex *.obj *.o *.d *.eep *.lst *.lss *.sym *.map *~
## === avrdude ===
flash: $(TARGET).hex
$(AVRDUDE) -c $(PROGRAMMER_TYPE) -p $(MCU) $(PROGRAMMER_ARGS) -U flash:w:$<
flashe: $(TARGET).eeprom
$(AVRDUDE) -c $(PROGRAMMER_TYPE) -p $(MCU) $(PROGRAMMER_ARGS) -U eeprom:w:$<
shell:
$(AVRDUDE) -c $(PROGRAMMER_TYPE) -p $(MCU) $(PROGRAMMER_ARGS) -nt
fser: all flash ser
ser:
gtkterm -p /dev/ttyUSB0
# === fuses ===
FUSE_STRING = -U lfuse:w:$(LFUSE):m -U hfuse:w:$(HFUSE):m -U efuse:w:$(EFUSE):m
fuses:
$(AVRDUDE) -c $(PROGRAMMER_TYPE) -p $(MCU) \
$(PROGRAMMER_ARGS) $(FUSE_STRING)
show_fuses:
$(AVRDUDE) -c $(PROGRAMMER_TYPE) -p $(MCU) $(PROGRAMMER_ARGS) -nv
set_default_fuses: FUSE_STRING = -U lfuse:w:$(LFUSE):m -U hfuse:w:$(HFUSE):m -U efuse:w:$(EFUSE):m
set_default_fuses: fuses

@ -0,0 +1,87 @@
#pragma once
//
// Bit and byte manipulation utilities
//
// --- Increment in range ---
// when overflown, wraps within range. Lower bound < upper bound.
// ..., upper bound excluded
#define inc_wrap(var, min, max) do { if ((var) >= (max - 1)) { (var) = (min); } else { (var)++; } } while(0)
// ..., upper bound included
#define inc_wrapi(var, min, max) inc_wrap((var), (min), (max) + 1)
// --- Decrement in range ---
// when underflown, wraps within range. Lower bound < upper bound.
// ..., upper bound excluded
#define dec_wrap(var, min, max) do { if ((var) <= (min)) { (var) = (max) - 1; } else { (var)--; } } while(0)
// ..., upper bound included
#define dec_wrapi(var, min, max) dec_wrap((var), (min), (max) + 1)
// --- Bit manipulation --
// Set bit
#define sbi(reg, bit) do { (reg) |= (1 << (uint8_t)(bit)); } while(0)
// Clear bit
#define cbi(reg, bit) do { (reg) &= ~(1 << (uint8_t)(bit)); } while(0)
// Get n-th bit
#define get_bit(reg, bit) (((reg) >> (uint8_t)(bit)) & 0x1)
// Test n-th bit (Can't use bit_is_set, as it's redefined in sfr_def.h)
#define bit_is_high(reg, bit) get_bit(reg, bit)
#define bit_is_low(reg, bit) (!get_bit(reg, bit))
// Write value to n-th bit
#define set_bit(reg, bit, value) do { (reg) = ((reg) & ~(1 << (uint8_t)(bit))) | (((uint8_t)(value) & 0x1) << (uint8_t)(bit)); } while(0)
// Invert n-th bit
#define toggle_bit(reg, bit) do { (reg) ^= (1 << (uint8_t)(bit)); } while(0)
// --- Bit manipulation with pointer to variable ---
// Set n-th bit in pointee
#define sbi_p(reg_p, bit) do { (*(reg_p)) |= (1 << (uint8_t)(bit)); } while(0)
// Clear n-th bit in pointee
#define cbi_p(reg_p, bit) do { (*(reg_p)) &= ~(1 << (uint8_t)(bit)); } while(0)
// Get n-th bit in pointee
#define get_bit_p(reg_p, bit) ((*(reg_p) >> (uint8_t)(bit)) & 0x1)
// Test n-th bit in pointee (Can't use bit_is_set, as it's redefined in sfr_def.h)
#define bit_is_high_p(reg_p, bit) get_bit_p(reg_p, bit)
#define bit_is_low_p(reg_p, bit) (!get_bit_p(reg_p, bit))
// Write value to a bit in pointee
#define set_bit_p(reg_p, bit, value) do { *(reg_p) = (*(reg_p) & ~(1 << ((uint8_t)(bit) & 0x1))) | (((uint8_t)(value) & 0x1) << (uint8_t)(bit)); } while(0)
#define toggle_bit_p(reg_p, bit) do { *(reg_p) ^= (1 << (uint8_t)(bit)); } while(0)
// --- Nibble manipulation ---
// Replace nibble in a byte
#define set_low_nibble(reg, value) do { (reg) = ((reg) & 0xF0) | ((uint8_t)(value) & 0xF); } while(0)
#define set_high_nibble(reg, value) do { (reg) = ((reg) & 0x0F) | (((uint8_t)(value) & 0xF) << 4); } while(0)
#define set_low_nibble_p(reg_p, value) do { *(reg_p) = (*(reg_p) & 0xF0) | ((uint8_t)(value) & 0xF); } while(0)
#define set_high_nibble_p(reg_p, value) do { *(reg_p) = (*(reg_p) & 0x0F) | (((uint8_t)(value) & 0xF) << 4); } while(0)
#define low_nibble(x) ((uint8_t)(x) & 0xF)
#define high_nibble(x) (((uint8_t)(x) & 0xF0) >> 4)
// --- Range tests ---
// Test if X is within low..high, regardless of bounds order
#define in_range(x, low, high) ((((low) < (high)) && ((x) >= (low) && (x) < (high))) || (((low) > (high)) && ((x) >= (high) && (x) < (low))))
// ..., include greater bound
#define in_rangei(x, low, high) ((((low) <= (high)) && ((x) >= (low) && (x) <= (high))) || (((low) > (high)) && ((x) >= (high) && (x) <= (low))))
// Test if X in low..high, wrap around ends if needed.
#define in_range_wrap(x, low, high) ((((low) < (high)) && ((x) >= (low) && (x) < (high))) || (((low) > (high)) && ((x) >= (low) || (x) < (high))))
// ..., include upper bound
#define in_range_wrapi(x, low, high) ((((low) <= (high)) && ((x) >= (low) && (x) <= (high))) || (((low) > (high)) && ((x) >= (low) || (x) <= (high))))

@ -0,0 +1,276 @@
#include <avr/io.h>
#include <stdbool.h>
#include <stdint.h>
#include "calc.h"
#include "iopins.h"
void set_dir_n(const uint8_t pin, const uint8_t d)
{
switch(pin) {
case 0: set_dir(0, d); return;
case 1: set_dir(1, d); return;
case 2: set_dir(2, d); return;
case 3: set_dir(3, d); return;
case 4: set_dir(4, d); return;
case 5: set_dir(5, d); return;
case 6: set_dir(6, d); return;
case 7: set_dir(7, d); return;
case 8: set_dir(8, d); return;
case 9: set_dir(9, d); return;
case 10: set_dir(10, d); return;
case 11: set_dir(11, d); return;
case 12: set_dir(12, d); return;
case 13: set_dir(13, d); return;
case 14: set_dir(14, d); return;
case 15: set_dir(15, d); return;
case 16: set_dir(16, d); return;
case 17: set_dir(17, d); return;
case 18: set_dir(18, d); return;
case 19: set_dir(19, d); return;
case 20: set_dir(20, d); return;
case 21: set_dir(21, d); return;
}
}
void as_input_n(const uint8_t pin)
{
switch(pin) {
case 0: as_input(0); return;
case 1: as_input(1); return;
case 2: as_input(2); return;
case 3: as_input(3); return;
case 4: as_input(4); return;
case 5: as_input(5); return;
case 6: as_input(6); return;
case 7: as_input(7); return;
case 8: as_input(8); return;
case 9: as_input(9); return;
case 10: as_input(10); return;
case 11: as_input(11); return;
case 12: as_input(12); return;
case 13: as_input(13); return;
case 14: as_input(14); return;
case 15: as_input(15); return;
case 16: as_input(16); return;
case 17: as_input(17); return;
case 18: as_input(18); return;
case 19: as_input(19); return;
case 20: as_input(20); return;
case 21: as_input(21); return;
}
}
void as_input_pu_n(const uint8_t pin)
{
switch(pin) {
case 0: as_input_pu(0); return;
case 1: as_input_pu(1); return;
case 2: as_input_pu(2); return;
case 3: as_input_pu(3); return;
case 4: as_input_pu(4); return;
case 5: as_input_pu(5); return;
case 6: as_input_pu(6); return;
case 7: as_input_pu(7); return;
case 8: as_input_pu(8); return;
case 9: as_input_pu(9); return;
case 10: as_input_pu(10); return;
case 11: as_input_pu(11); return;
case 12: as_input_pu(12); return;
case 13: as_input_pu(13); return;
case 14: as_input_pu(14); return;
case 15: as_input_pu(15); return;
case 16: as_input_pu(16); return;
case 17: as_input_pu(17); return;
case 18: as_input_pu(18); return;
case 19: as_input_pu(19); return;
case 20: as_input_pu(20); return;
case 21: as_input_pu(21); return;
}
}
void as_output_n(const uint8_t pin)
{
switch(pin) {
case 0: as_output(0); return;
case 1: as_output(1); return;
case 2: as_output(2); return;
case 3: as_output(3); return;
case 4: as_output(4); return;
case 5: as_output(5); return;
case 6: as_output(6); return;
case 7: as_output(7); return;
case 8: as_output(8); return;
case 9: as_output(9); return;
case 10: as_output(10); return;
case 11: as_output(11); return;
case 12: as_output(12); return;
case 13: as_output(13); return;
case 14: as_output(14); return;
case 15: as_output(15); return;
case 16: as_output(16); return;
case 17: as_output(17); return;
case 18: as_output(18); return;
case 19: as_output(19); return;
case 20: as_output(20); return;
case 21: as_output(21); return;
}
}
void set_pin_n(const uint8_t pin, const uint8_t v)
{
switch(pin) {
case 0: set_pin(0, v); return;
case 1: set_pin(1, v); return;
case 2: set_pin(2, v); return;
case 3: set_pin(3, v); return;
case 4: set_pin(4, v); return;
case 5: set_pin(5, v); return;
case 6: set_pin(6, v); return;
case 7: set_pin(7, v); return;
case 8: set_pin(8, v); return;
case 9: set_pin(9, v); return;
case 10: set_pin(10, v); return;
case 11: set_pin(11, v); return;
case 12: set_pin(12, v); return;
case 13: set_pin(13, v); return;
case 14: set_pin(14, v); return;
case 15: set_pin(15, v); return;
case 16: set_pin(16, v); return;
case 17: set_pin(17, v); return;
case 18: set_pin(18, v); return;
case 19: set_pin(19, v); return;
case 20: set_pin(20, v); return;
case 21: set_pin(21, v); return;
}
}
void pin_low_n(const uint8_t pin)
{
switch(pin) {
case 0: pin_low(0); return;
case 1: pin_low(1); return;
case 2: pin_low(2); return;
case 3: pin_low(3); return;
case 4: pin_low(4); return;
case 5: pin_low(5); return;
case 6: pin_low(6); return;
case 7: pin_low(7); return;
case 8: pin_low(8); return;
case 9: pin_low(9); return;
case 10: pin_low(10); return;
case 11: pin_low(11); return;
case 12: pin_low(12); return;
case 13: pin_low(13); return;
case 14: pin_low(14); return;
case 15: pin_low(15); return;
case 16: pin_low(16); return;
case 17: pin_low(17); return;
case 18: pin_low(18); return;
case 19: pin_low(19); return;
case 20: pin_low(20); return;
case 21: pin_low(21); return;
}
}
void pin_high_n(const uint8_t pin)
{
switch(pin) {
case 0: pin_high(0); return;
case 1: pin_high(1); return;
case 2: pin_high(2); return;
case 3: pin_high(3); return;
case 4: pin_high(4); return;
case 5: pin_high(5); return;
case 6: pin_high(6); return;
case 7: pin_high(7); return;
case 8: pin_high(8); return;
case 9: pin_high(9); return;
case 10: pin_high(10); return;
case 11: pin_high(11); return;
case 12: pin_high(12); return;
case 13: pin_high(13); return;
case 14: pin_high(14); return;
case 15: pin_high(15); return;
case 16: pin_high(16); return;
case 17: pin_high(17); return;
case 18: pin_high(18); return;
case 19: pin_high(19); return;
case 20: pin_high(20); return;
case 21: pin_high(21); return;
}
}
void toggle_pin_n(const uint8_t pin)
{
switch(pin) {
case 0: toggle_pin(0); return;
case 1: toggle_pin(1); return;
case 2: toggle_pin(2); return;
case 3: toggle_pin(3); return;
case 4: toggle_pin(4); return;
case 5: toggle_pin(5); return;
case 6: toggle_pin(6); return;
case 7: toggle_pin(7); return;
case 8: toggle_pin(8); return;
case 9: toggle_pin(9); return;
case 10: toggle_pin(10); return;
case 11: toggle_pin(11); return;
case 12: toggle_pin(12); return;
case 13: toggle_pin(13); return;
case 14: toggle_pin(14); return;
case 15: toggle_pin(15); return;
case 16: toggle_pin(16); return;
case 17: toggle_pin(17); return;
case 18: toggle_pin(18); return;
case 19: toggle_pin(19); return;
case 20: toggle_pin(20); return;
case 21: toggle_pin(21); return;
}
}
bool get_pin_n(const uint8_t pin)
{
switch(pin) {
case 0: return get_pin(0);
case 1: return get_pin(1);
case 2: return get_pin(2);
case 3: return get_pin(3);
case 4: return get_pin(4);
case 5: return get_pin(5);
case 6: return get_pin(6);
case 7: return get_pin(7);
case 8: return get_pin(8);
case 9: return get_pin(9);
case 10: return get_pin(10);
case 11: return get_pin(11);
case 12: return get_pin(12);
case 13: return get_pin(13);
case 14: return get_pin(14);
case 15: return get_pin(15);
case 16: return get_pin(16);
case 17: return get_pin(17);
case 18: return get_pin(18);
case 19: return get_pin(19);
case 20: return get_pin(20);
case 21: return get_pin(21);
}
return false;
}
bool is_low_n(const uint8_t pin)
{
return !get_pin_n(pin);
}
bool is_high_n(const uint8_t pin)
{
return get_pin_n(pin);
}

@ -0,0 +1,213 @@
#pragma once
//
// * Utilities for pin aliasing / numbering. *
//
// Designed for Arduino.
//
// If you know the pin number beforehand, you can use the macros.
//
// If you need to use a variable for pin number, use the `_n` functions.
// They are much slower, so always check if you really need them
// - and they aren't fit for things where precise timing is required.
//
#include <avr/io.h>
#include <stdbool.h>
#include <stdint.h>
#include "calc.h"
// type: pointer to port
typedef volatile uint8_t* PORT_P;
/** Pin numbering reference */
#define D0 0
#define D1 1
#define D2 2
#define D3 3
#define D4 4
#define D5 5
#define D6 6
#define D7 7
#define D8 8
#define D9 9
#define D10 10
#define D11 11
#define D12 12
#define D13 13
#define D14 14
#define D15 15
#define D16 16
#define D17 17
#define D18 18
#define D19 19
#define D20 20
#define D21 21
#define A0 14
#define A1 15
#define A2 16
#define A3 17
#define A4 18
#define A5 19
#define A6 20
#define A7 21
#define _ddr(pin) _DDR_##pin
#define _pin(pin) _PIN_##pin
#define _pn(pin) _PN_##pin
#define _port(pin) _PORT_##pin
/** Set pin direction */
#define set_dir(pin, d) set_bit( _ddr(pin), _pn(pin), d )
void set_dir_n(const uint8_t pin, const uint8_t d);
/** Configure pin as input */
#define as_input(pin) cbi( _ddr(pin), _pn(pin) )
void as_input_n(const uint8_t pin);
/** Configure pin as input, with pull-up enabled */
#define as_input_pu(pin) { as_input(pin); pin_high(pin); }
void as_input_pu_n(const uint8_t pin);
/** Configure pin as output */
#define as_output(pin) sbi( _ddr(pin), _pn(pin) )
void as_output_n(const uint8_t pin);
/** Write value to a pin */
#define set_pin(pin, v) set_bit( _port(pin), _pn(pin), v )
void set_pin_n(const uint8_t pin, const uint8_t v);
/** Write 0 to a pin */
#define pin_low(pin) cbi( _port(pin), _pn(pin) )
void pin_low_n(const uint8_t pin);
/** Write 1 to a pin */
#define pin_high(pin) sbi( _port(pin), _pn(pin) )
void pin_high_n(const uint8_t pin);
/** Toggle a pin state */
#define toggle_pin(pin) sbi( _pin(pin), _pn(pin) )
void toggle_pin_n(const uint8_t pin);
/** Read a pin value */
#define get_pin(pin) get_bit( _pin(pin), _pn(pin) )
bool get_pin_n(const uint8_t pin);
/** CHeck if pin is low */
#define is_low(pin) (get_pin(pin) == 0)
bool is_low_n(const uint8_t pin);
/** CHeck if pin is high */
#define is_high(pin) (get_pin(pin) != 0)
bool is_high_n(const uint8_t pin);
// Helper macros
#define _PORT_0 PORTD
#define _PORT_1 PORTD
#define _PORT_2 PORTD
#define _PORT_3 PORTD
#define _PORT_4 PORTD
#define _PORT_5 PORTD
#define _PORT_6 PORTD
#define _PORT_7 PORTD
#define _PORT_8 PORTB
#define _PORT_9 PORTB
#define _PORT_10 PORTB
#define _PORT_11 PORTB
#define _PORT_12 PORTB
#define _PORT_13 PORTB
#define _PORT_14 PORTC
#define _PORT_15 PORTC
#define _PORT_16 PORTC
#define _PORT_17 PORTC
#define _PORT_18 PORTC
#define _PORT_19 PORTC
#define _PORT_20 PORTC
#define _PORT_21 PORTC
#define _PIN_0 PIND
#define _PIN_1 PIND
#define _PIN_2 PIND
#define _PIN_3 PIND
#define _PIN_4 PIND
#define _PIN_5 PIND
#define _PIN_6 PIND
#define _PIN_7 PIND
#define _PIN_8 PINB
#define _PIN_9 PINB
#define _PIN_10 PINB
#define _PIN_11 PINB
#define _PIN_12 PINB
#define _PIN_13 PINB
#define _PIN_14 PINC
#define _PIN_15 PINC
#define _PIN_16 PINC
#define _PIN_17 PINC
#define _PIN_18 PINC
#define _PIN_19 PINC
#define _PIN_20 PINC
#define _PIN_21 PINC
#define _DDR_0 DDRD
#define _DDR_1 DDRD
#define _DDR_2 DDRD
#define _DDR_3 DDRD
#define _DDR_4 DDRD
#define _DDR_5 DDRD
#define _DDR_6 DDRD
#define _DDR_7 DDRD
#define _DDR_8 DDRB
#define _DDR_9 DDRB
#define _DDR_10 DDRB
#define _DDR_11 DDRB
#define _DDR_12 DDRB
#define _DDR_13 DDRB
#define _DDR_14 DDRC
#define _DDR_15 DDRC
#define _DDR_16 DDRC
#define _DDR_17 DDRC
#define _DDR_18 DDRC
#define _DDR_19 DDRC
#define _DDR_20 DDRC
#define _DDR_21 DDRC
#define _PN_0 0
#define _PN_1 1
#define _PN_2 2
#define _PN_3 3
#define _PN_4 4
#define _PN_5 5
#define _PN_6 6
#define _PN_7 7
#define _PN_8 0
#define _PN_9 1
#define _PN_10 2
#define _PN_11 3
#define _PN_12 4
#define _PN_13 5
#define _PN_14 0
#define _PN_15 1
#define _PN_16 2
#define _PN_17 3
#define _PN_18 4
#define _PN_19 5
#define _PN_20 6
#define _PN_21 7

@ -0,0 +1,235 @@
#pragma once
#include <avr/io.h>
#include <util/delay.h>
#include <stdint.h>
#include <stdbool.h>
#include "lib/iopins.h"
#include "lib/uart.h"
#include "lib/stream.h"
#define SKIP_ROM 0xCC
#define CONVERT_T 0x44
#define READ_SCRATCHPAD 0xBE
/** Perform bus reset. Returns true if any device is connected */
bool ow_reset(const uint8_t pin)
{
as_output_n(pin);
pin_low_n(pin);
_delay_us(480);
as_input_pu_n(pin);
_delay_us(70);
const bool a = get_pin_n(pin);
_delay_us(410);
return a;
}
/** Send a single bit */
void ow_tx_bit(const uint8_t pin, const bool bit)
{
as_output_n(pin);
pin_low_n(pin);
if (bit) {
_delay_us(6);
as_input_pu_n(pin);
_delay_us(64);
} else {
_delay_us(60);
as_input_pu_n(pin);
_delay_us(10);
}
}
/** Send a single byte */
void ow_send(const uint8_t pin, const uint8_t byte)
{
for (uint8_t i = 0; i < 8; i++)
{
ow_tx_bit(pin, (byte >> i) & 0x01);
}
}
/** Read a single bit */
bool ow_rx_bit(const uint8_t pin)
{
as_output_n(pin);
pin_low_n(pin);
_delay_us(6);
as_input_pu_n(pin);
_delay_us(9);
const bool a = get_pin_n(pin);
_delay_us(55);
return a;
}
/** Read a single byte */
uint8_t ow_read(const uint8_t pin)
{
uint8_t byte = 0;
for (uint8_t i = 0; i < 8; i++)
{
byte = (byte >> 1) | (ow_rx_bit(pin) << 7);
}
return byte;
}
/** Wait until the device is ready. Returns false on timeout */
bool ow_wait_ready(const uint8_t pin)
{
uint16_t timeout = 700;
as_input_pu_n(pin);
while (--timeout > 0)
{
if (is_high_n(pin)) return true;
_delay_ms(1);
}
return false;
}
/** Read bytes into an array */
void ow_read_arr(const uint8_t pin, uint8_t* array, const uint8_t count)
{
for (uint8_t i = 0; i < count; i++)
{
array[i] = ow_read(pin);
}
}
// ---------- CRC utils ----------
/*
Dallas 1-wire CRC routines for Arduino with examples of usage.
The 16-bit routine is new.
The 8-bit routine is from http://github.com/paeaetech/paeae/tree/master/Libraries/ds2482/
Copyright (C) 2010 Kairama Inc
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
// Dallas 1-wire 16-bit CRC calculation. Developed from Maxim Application Note 27.
/** Compute a CRC16 checksum */
uint16_t crc16( uint8_t *data, uint8_t len)
{
uint16_t crc = 0;
for (uint8_t i = 0; i < len; i++)
{
uint8_t inbyte = data[i];
for (uint8_t j = 0; j < 8; j++)
{
uint8_t mix = (crc ^ inbyte) & 0x01;
crc = crc >> 1;
if (mix)
crc = crc ^ 0xA001;
inbyte = inbyte >> 1;
}
}
return crc;
}
// The 1-Wire CRC scheme is described in Maxim Application Note 27:
// "Understanding and Using Cyclic Redundancy Checks with Maxim iButton Products"
/** Compute a CRC8 checksum */
uint8_t crc8(uint8_t *addr, uint8_t len)
{
uint8_t crc = 0;
for (uint8_t i = 0; i < len; i++)
{
uint8_t inbyte = addr[i];
for (uint8_t j = 0; j < 8; j++)
{
uint8_t mix = (crc ^ inbyte) & 0x01;
crc >>= 1;
if (mix)
crc ^= 0x8C;
inbyte >>= 1;
}
}
return crc;
}
// --- utils for DS1820 ---
#define TEMP_ERROR -32768
/** Read temperature in 0.0625°C, or TEMP_ERROR on error */
int16_t ds1820_read_temp(uint8_t pin)
{
ow_send(pin, READ_SCRATCHPAD);
uint8_t bytes[9];
ow_read_arr(pin, bytes, 9);
put_nl(uart);
uint8_t crc = crc8(bytes, 8);
if (crc != bytes[8]) {
return TEMP_ERROR;
} else {
int16_t a = ((bytes[1] << 8) | bytes[0]) >> 1;
a = a << 4;
a += (16 - bytes[6]) & 0x0F;
a -= 0x04;
return a;
}
}
/** Read temperature in 0.1°C, or TEMP_ERROR on error */
int16_t ds1820_read_temp_c(uint8_t pin)
{
int32_t temp = ds1820_read_temp(pin);
if (temp == TEMP_ERROR)
return TEMP_ERROR;
temp *= 625;
uint16_t rem = temp % 1000;
temp /= 1000;
if (rem >= 500) temp++;
return (int16_t) temp;
}

@ -0,0 +1,213 @@
#include <stdlib.h>
#include <stdbool.h>
#include <stdint.h>
#include "stream.h"
#include "calc.h"
static char tmpstr[20]; // buffer for number rendering
void put_str(const STREAM *p, char* str)
{
char c;
while ((c = *str++)) {
p->tx(c);
}
}
void put_str_P(const STREAM *p, const char* str)
{
char c;
while ((c = pgm_read_byte(str++))) {
p->tx(c);
}
}
static void _putnf(const STREAM *p, const uint8_t places);
/** Send signed int8 */
void put_u8(const STREAM *p, const uint8_t num)
{
utoa(num, tmpstr, 10);
put_str(p, tmpstr);
}
/** Send unsigned int8 */
void put_i8(const STREAM *p, const int8_t num)
{
itoa(num, tmpstr, 10);
put_str(p, tmpstr);
}
/** Send unsigned int */
void put_u16(const STREAM *p, const uint16_t num)
{
utoa(num, tmpstr, 10);
put_str(p, tmpstr);
}
/** Send signed int */
void put_i16(const STREAM *p, const int16_t num)
{
itoa(num, tmpstr, 10);
put_str(p, tmpstr);
}
/** Send unsigned long */
void put_u32(const STREAM *p, const uint32_t num)
{
ultoa(num, tmpstr, 10);
put_str(p, tmpstr);
}
/** Send signed long */
void put_i32(const STREAM *p, const int32_t num)
{
ltoa(num, tmpstr, 10);
put_str(p, tmpstr);
}
/** Print number as hex */
void _print_hex(const STREAM *p, uint8_t* start, uint8_t bytes)
{
for (; bytes > 0; bytes--) {
uint8_t b = *(start + bytes - 1);
for(uint8_t j = 0; j < 2; j++) {
uint8_t x = high_nibble(b);
b = b << 4;
if (x < 0xA) {
p->tx('0' + x);
} else {
p->tx('A' + (x - 0xA));
}
}
}
}
/** Send unsigned int8 */
void put_x8(const STREAM *p, const uint8_t num)
{
_print_hex(p, (uint8_t*) &num, 1);
}
/** Send int as hex */
void put_x16(const STREAM *p, const uint16_t num)
{
_print_hex(p, (uint8_t*) &num, 2);
}
/** Send long as hex */
void put_x32(const STREAM *p, const uint32_t num)
{
_print_hex(p, (uint8_t*) &num, 4);
}
/** Send long long as hex */
void put_x64(const STREAM *p, const uint64_t num)
{
_print_hex(p, (uint8_t*) &num, 8);
}
// float variant doesn't make sense for 8-bit int
/** Send unsigned int as float */
void put_u16f(const STREAM *p, const uint16_t num, const uint8_t places)
{
utoa(num, tmpstr, 10);
_putnf(p, places);
}
/** Send signed int as float */
void put_i16f(const STREAM *p, const int16_t num, const uint8_t places)
{
if (num < 0) {
p->tx('-');
itoa(-num, tmpstr, 10);
} else {
itoa(num, tmpstr, 10);
}
_putnf(p, places);
}
/** Send unsigned long as float */
void put_u32f(const STREAM *p, const uint32_t num, const uint8_t places)
{
ultoa(num, tmpstr, 10);
_putnf(p, places);
}
/** Send signed long as float */
void put_i32f(const STREAM *p, const int32_t num, const uint8_t places)
{
if (num < 0) {
p->tx('-');
ltoa(-num, tmpstr, 10);
} else {
ltoa(num, tmpstr, 10);
}
_putnf(p, places);
}
/** Print number in tmp string as float with given decimal point position */
void _putnf(const STREAM *p, const uint8_t places)
{
// measure text length
uint8_t len = 0;
while(tmpstr[len] != 0) len++;
int8_t at = len - places;
// print virtual zeros
if (at <= 0) {
p->tx('0');
p->tx('.');
while(at <= -1) {
p->tx('0');
at++;
}
at = -1;
}
// print the number
uint8_t i = 0;
while(i < len) {
if (at-- == 0) {
p->tx('.');
}
p->tx(tmpstr[i++]);
}
}
/** Print CR LF */
void put_nl(const STREAM *p)
{
p->tx(13);
p->tx(10);
}

@ -0,0 +1,100 @@
#pragma once
//
// Streams -- in this library -- are instances of type STREAM.
//
// A stream can be used for receiving and sending bytes, generally
// it's a pipe to a device.
//
// They are designed for printing numbers and strings, but can
// also be used for general data transfer.
//
// Examples of streams:
// "uart.h" -> declares global variable "uart" which is a pointer to the UART stream
// "lcd.h" -> declares a global variable "lcd" (pointer to LCD scho stream)
//
// Streams help avoid code duplication, since the same functions can be used
// to format and print data to different device types.
//
#include <stdlib.h>
#include <stdbool.h>
#include <stdint.h>
#include <avr/pgmspace.h>
/** Stream structure */
typedef struct {
void (*tx) (uint8_t b);
uint8_t (*rx) (void);
} STREAM;
/** Print string into a stream */
void put_str(const STREAM *p, char* str);
/** Print a programspace string into a stream */
void put_str_P(const STREAM *p, const char* str);
/** Send signed int8 */
#define put_char(p, c) (p)->tx((c))
void put_u8(const STREAM *p, const uint8_t num);
/** Send unsigned int8 */
void put_i8(const STREAM *p, const int8_t num);
/** Send unsigned int */
void put_u16(const STREAM *p, const uint16_t num);
/** Send signed int */
void put_i16(const STREAM *p, const int16_t num);
/** Send unsigned long */
void put_u32(const STREAM *p, const uint32_t num);
/** Send signed long */
void put_i32(const STREAM *p, const int32_t num);
/** Send unsigned int8 */
void put_x8(const STREAM *p, const uint8_t num);
/** Send int as hex */
void put_x16(const STREAM *p, const uint16_t num);
/** Send long as hex */
void put_x32(const STREAM *p, const uint32_t num);
/** Send long long as hex */
void put_x64(const STREAM *p, const uint64_t num);
// float variant doesn't make sense for 8-bit int
/** Send unsigned int as float */
void put_u16f(const STREAM *p, const uint16_t num, const uint8_t places);
/** Send signed int as float */
void put_i16f(const STREAM *p, const int16_t num, const uint8_t places);
/** Send unsigned long as float */
void put_u32f(const STREAM *p, const uint32_t num, const uint8_t places);
/** Send signed long as float */
void put_i32f(const STREAM *p, const int32_t num, const uint8_t places);
/** Print CR LF */
void put_nl(const STREAM *p);

@ -0,0 +1,678 @@
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <util/delay.h>
#include <stdbool.h>
#include <stdint.h>
#include <stdlib.h>
#include "calc.h"
#include "uart.h"
#include "stream.h"
// Shared stream instance
static STREAM _uart_singleton;
STREAM* uart;
void _uart_init_do(uint16_t ubrr) {
/*Set baud rate */
UBRR0H = (uint8_t) (ubrr >> 8);
UBRR0L = (uint8_t) ubrr;
// Enable Rx and Tx
UCSR0B = (1 << RXEN0) | (1 << TXEN0);
// 8-bit data, 1 stop bit
UCSR0C = (0b11 << UCSZ00);
_uart_singleton.tx = &uart_tx;
_uart_singleton.rx = &uart_rx;
uart = &_uart_singleton;
}
/** Enable or disable RX ISR */
void uart_isr_rx(bool yes)
{
set_bit(UCSR0B, RXCIE0, yes);
}
/** Enable or disable TX ISR (1 byte is sent) */
void uart_isr_tx(bool yes)
{
set_bit(UCSR0B, TXCIE0, yes);
}
/** Enable or disable DRE ISR (all is sent) */
void uart_isr_dre(bool yes)
{
set_bit(UCSR0B, UDRIE0, yes);
}
/** Send byte over UART */
void uart_tx(uint8_t data)
{
// Wait for transmit buffer
while (!uart_tx_ready());
// send it
UDR0 = data;
}
/** Receive one byte over UART */
uint8_t uart_rx()
{
// Wait for data to be received
while (!uart_rx_ready());
// Get and return received data from buffer
return UDR0;
}
/** Send string over UART */
void uart_puts(const char* str)
{
while (*str) {
uart_tx(*str++);
}
}
/** Send progmem string over UART */
void uart_puts_P(const char* str)
{
char c;
while ((c = pgm_read_byte(str++))) {
uart_tx(c);
}
}
/** Clear receive buffer */
void uart_flush()
{
uint8_t dummy;
while (bit_is_high(UCSR0A, RXC0)) {
dummy = UDR0;
}
}
// ------------- VT100 extension --------------
void _vt_apply_style();
void _vt_reset_attribs_do();
void _vt_style_do();
void _vt_color_do();
void vt_goto(uint8_t x, uint8_t y)
{
uart_tx(27);
uart_tx('[');
put_u8(uart, y+1); // one-based !
uart_tx(';');
put_u8(uart, x+1);
uart_tx('H');
}
void vt_goto_x(uint8_t x)
{
uart_tx(27);
uart_tx('[');
put_u8(uart, x+1);
uart_tx('`');
}
void vt_goto_y(uint8_t y)
{
uart_tx(27);
uart_tx('[');
put_u8(uart, y+1);
uart_tx('d');
}
void vt_move(int8_t x, int8_t y)
{
vt_move_x(x);
vt_move_y(y);
}
void vt_move_x(int8_t x)
{
if (x < 0) {
vt_left(-x);
} else {
vt_right(x);
}
}
void vt_move_y(int8_t y)
{
if (y < 0) {
vt_up(-y);
} else {
vt_down(y);
}
}
void vt_up(uint8_t y)
{
if (y == 0) return;
uart_tx(27);
uart_tx('[');
put_u8(uart, y);
uart_tx('A');
}
void vt_down(uint8_t y)
{
if (y == 0) return;
uart_tx(27);
uart_tx('[');
put_u8(uart, y);
uart_tx('B');
}
void vt_left(uint8_t x)
{
if (x == 0) return;
uart_tx(27);
uart_tx('[');
put_u8(uart, x);
uart_tx('D');
}
void vt_right(uint8_t x)
{
if (x == 0) return;
uart_tx(27);
uart_tx('[');
put_u8(uart, x);
uart_tx('C');
}
void vt_scroll(int8_t y)
{
while (y < 0) {
uart_tx(27);
uart_tx('D'); // up
y++;
}
while (y > 0) {
uart_tx(27);
uart_tx('M'); // down
y--;
}
}
void vt_scroll_set(uint8_t from, uint8_t to)
{
uart_tx(27);
uart_tx('[');
put_u8(uart, from);
uart_tx(';');
put_u8(uart, to);
uart_tx('r');
}
void vt_scroll_reset()
{
uart_tx(27);
uart_tx('[');
uart_tx('r');
}
typedef struct {
uint8_t flags;
uint8_t fg;
uint8_t bg;
} vt_style_t;
vt_style_t saved_style;
vt_style_t current_style;
void vt_save()
{
uart_puts_P(PSTR("\x1B[s"));
saved_style = current_style;
}
void vt_restore()
{
uart_puts_P(PSTR("\x1B[u"));
current_style = saved_style;
}
/** Disable all text attributes (excluding color) */
void vt_attr_reset()
{
current_style.flags = 0;
_vt_reset_attribs_do();
_vt_apply_style();
}
/** Set color to white on black */
void vt_color_reset()
{
current_style.fg = VT_WHITE;
current_style.bg = VT_BLACK;
_vt_color_do();
}
/** Enable or disable a text attribute */
void vt_attr(uint8_t attribute, bool on)
{
// flags are powers of two
// so this can handle multiple OR'd flags
for(uint8_t c = 1; c <= VT_FAINT; c *= 2) {
if (attribute & c) {
if (on) {
current_style.flags |= c;
} else {
current_style.flags &= ~c;
}
}
}
_vt_apply_style();
}
/** Send style and color commands */
void _vt_apply_style()
{
_vt_reset_attribs_do();
_vt_style_do();
_vt_color_do();
}
/** Set color 0..7 */
void vt_color(uint8_t fg, uint8_t bg)
{
current_style.fg = fg;
current_style.bg = bg;
_vt_color_do();
}
/** Set FG color 0..7 */
void vt_color_fg(uint8_t fg)
{
current_style.fg = fg;
_vt_color_do();
}
/** Set BG color 0..7 */
void vt_color_bg(uint8_t bg)
{
current_style.bg = bg;
_vt_color_do();
}
/** Send reset command */
inline void _vt_reset_attribs_do()
{
uart_puts_P(PSTR("\x1B[m")); // reset
}
/** Send commands for text attribs */
void _vt_style_do()
{
if (current_style.flags & VT_BOLD) {
uart_puts_P(PSTR("\x1B[1m"));
}
if (current_style.flags & VT_FAINT) {
uart_puts_P(PSTR("\x1B[2m"));
}
if (current_style.flags & VT_ITALIC) {
uart_puts_P(PSTR("\x1B[3m"));
}
if (current_style.flags & VT_UNDERLINE) {
uart_puts_P(PSTR("\x1B[4m"));
}
if (current_style.flags & VT_BLINK) {
uart_puts_P(PSTR("\x1B[5m"));
}
if (current_style.flags & VT_REVERSE) {
uart_puts_P(PSTR("\x1B[7m"));
}
}
/** Send commands for xolor */
void _vt_color_do()
{
uart_tx(27);
uart_tx('[');
put_u8(uart, 30 + current_style.fg);
uart_tx(';');
put_u8(uart, 40 + current_style.bg);
uart_tx('m');
}
/** Insert blank lines febore the current line */
void vt_insert_lines(uint8_t count)
{
uart_tx(27);
uart_tx('[');
put_u8(uart, count);
uart_tx('L');
}
/** Delete lines from the current line down */
void vt_delete_lines(uint8_t count)
{
uart_tx(27);
uart_tx('[');
put_u8(uart, count);
uart_tx('M');
}
/** Insert empty characters at cursor */
void vt_insert_chars(uint8_t count)
{
uart_tx(27);
uart_tx('[');
put_u8(uart, count);
uart_tx('@');
}
/** Delete characters at cursor */
void vt_delete_chars(uint8_t count)
{
uart_tx(27);
uart_tx('[');
put_u8(uart, count);
uart_tx('P');
}
void vt_clear()
{
uart_puts_P(PSTR("\x1B[2J"));
}
void vt_erase_forth()
{
uart_puts_P(PSTR("\x1B[K"));
}
void vt_erase_back()
{
uart_puts_P(PSTR("\x1B[1K"));
}
void vt_erase_line()
{
uart_puts_P(PSTR("\x1B[2K"));
}
void vt_erase_above()
{
uart_puts_P(PSTR("\x1B[1J"));
}
void vt_erase_below()
{
uart_puts_P(PSTR("\x1B[J"));
}
void vt_home()
{
uart_puts_P(PSTR("\x1B[H"));
}
/** Initialize helper variables */
void vt_init()
{
vt_reset();
}
/** Reset state and clear screen */
void vt_reset()
{
// reset color and attributes
vt_color_reset();
vt_attr_reset();
vt_scroll_reset();
// clear screen
vt_clear();
// go to top left
vt_home();
// overwrite saved state
vt_save();
}
// Assigned keyhandler
void (*_vt_kh)(uint8_t, bool) = NULL;
/** Assign a key handler (later used with vt_handle_key) */
void vt_set_key_handler(void (*handler)(uint8_t, bool))
{
_vt_kh = handler;
}
// state machine states
typedef enum {
GROUND = 0,
ESC = 1,
BR = 2,
O = 3,
WAITING_TILDE = 4
} KSTATE;
// code received before started to wait for a tilde
uint8_t _before_wtilde;
// current state
KSTATE _kstate = GROUND;
void _vt_kh_abort()
{
switch (_kstate) {
case ESC:
_vt_kh(VK_ESC, true);
break;
case BR:
_vt_kh(VK_ESC, true);
_vt_kh('[', false);
break;
case O:
_vt_kh(VK_ESC, true);
_vt_kh('O', false);
break;
case WAITING_TILDE:
_vt_kh(VK_ESC, true);
_vt_kh('[', false);
vt_handle_key(_before_wtilde);
break;
case GROUND:
// nop
break;
}
_kstate = GROUND;
}
/**
* Handle a key received over UART
* Takes care of multi-byte keys and translates them to special
* constants.
*/
void vt_handle_key(uint8_t c)
{
if (_vt_kh == NULL) return;
switch (_kstate) {
case GROUND:
switch (c) {
case 27:
_kstate = ESC;
break;
case VK_ENTER:
case VK_TAB:
case VK_BACKSPACE:
_vt_kh(c, true);
return;
default:
_vt_kh(c, false);
return;
}
break; // continue to next char
case ESC:
switch (c) {
case '[':
_kstate = BR;
break; // continue to next char
case 'O':
_kstate = O;
break; // continue to next char
default:
// bad code
_vt_kh_abort();
vt_handle_key(c);
return;
}
break;
case BR:
switch (c) {
// arrows
case 65:
case 66:
case 67:
case 68:
_vt_kh(c, true);
_kstate = GROUND;
return;
// ins del pgup pgdn
case 50:
case 51:
case 53:
case 54:
// wait for terminating tilde
_before_wtilde = c;
_kstate = WAITING_TILDE;
break; // continue to next char
// bad key
default:
_vt_kh_abort();
vt_handle_key(c);
return;
}
break;
case O:
switch (c) {
// F keys
case 80:
case 81:
case 82:
case 83:
// home, end
case 72:
case 70:
_vt_kh(c, true);
_kstate = GROUND;
return;
// bad key
default:
_vt_kh_abort();
vt_handle_key(c);
return;
}
case WAITING_TILDE:
if (c != '~') {
_vt_kh_abort();
vt_handle_key(c);
return;
} else {
_vt_kh(_before_wtilde, true);
_kstate = GROUND;
return;
}
}
// wait for next key
if (_kstate != GROUND) {
_delay_ms(2);
if (!uart_rx_ready()) {
// abort receiving
_vt_kh_abort();
} else {
vt_handle_key(uart_rx());
}
}
}

@ -0,0 +1,253 @@
#pragma once
//
// Utilities for UART communication.
//
// First, init uart with desired baud rate using uart_init(baud).
// Then enable interrupts you want with uart_isr_XXX().
//
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <util/delay.h>
#include <stdbool.h>
#include <stdint.h>
#include "stream.h"
// Shared UART stream object
// Can be used with functions from stream.h once UART is initialized
extern STREAM* uart;
/** Init UART for given baudrate */
void _uart_init_do(uint16_t ubrr); // internal, needed for the macro.
#define uart_init(baud) _uart_init_do(F_CPU / 16 / (baud) - 1)
/** Check if there's a byte in the RX register */
#define uart_rx_ready() (0 != (UCSR0A & (1 << RXC0)))
/** Check if transmission of everything is done */
#define uart_tx_ready() (0 != (UCSR0A & (1 << UDRE0)))
// Enable UART interrupts
/** Enable or disable RX ISR */
void uart_isr_rx(bool enable);
/** Enable or disable TX ISR (1 byte is sent) */
void uart_isr_tx(bool enable);
/** Enable or disable DRE ISR (all is sent) */
void uart_isr_dre(bool enable);
// Basic IO
/** Receive one byte over UART */
uint8_t uart_rx();
/** Send byte over UART */
#define uart_putc(data) uart_tx((data))
void uart_tx(uint8_t data);
/** Clear receive buffer */
void uart_flush();
// Strings
/** Send string over UART */
void uart_puts(const char* str);
/** Send progmem string over UART */
void uart_puts_P(const char* str);
//
// ANSI / VT100 utilities for UART
//
// To use this, first call uart_init(baud) and vt_init()
// To print stuff on the screen, use uart_puts() etc from uart.h
//
// INIT
/** Initialize helper variables */
void vt_init();
/** Reset state and clear screen */
void vt_reset();
// CURSOR MOVE
/** Move cursor to top left corner */
void vt_home();
/** Jump to a location on the screen */
void vt_goto(uint8_t x, uint8_t y);
/** Jump to given X, keep Y */
void vt_goto_x(uint8_t x);
/** Jump to given Y, keep X */
void vt_goto_y(uint8_t y);
/** Move cursor relative to current location */
void vt_move(int8_t x, int8_t y);
/** Move cursor horizontally */
void vt_move_x(int8_t x);
/** Move cursor vertically */
void vt_move_y(int8_t y);
/** Move cursor up y cells */
void vt_up(uint8_t y);
/** Move cursor down y cells */
void vt_down(uint8_t y);
/** Move cursor left x cells */
void vt_left(uint8_t x);
/** Move cursor right x cells */
void vt_right(uint8_t x);
// SCROLLING
/** Scroll y lines down (like up/down, but moves window if needed) */
void vt_scroll(int8_t down);
/** Set scrolling region (lines) */
void vt_scroll_set(uint8_t from, uint8_t to);
/** Sets scrolling region to the entire screen. */
void vt_scroll_reset();
// COLOR
#define VT_BLACK 0
#define VT_RED 1
#define VT_GREEN 2
#define VT_YELLOW 3
#define VT_BLUE 4
#define VT_MAGENTA 5
#define VT_CYAN 6
#define VT_WHITE 7
/** Set color 0..7 */
void vt_color(uint8_t fg, uint8_t bg);
/** Set FG color 0..7 */
void vt_color_fg(uint8_t fg);
/** Set BG color 0..7 */
void vt_color_bg(uint8_t bg);
/** Set color to white on black */
void vt_color_reset();
// STYLES
#define VT_BOLD 1
#define VT_UNDERLINE 2
#define VT_BLINK 4
#define VT_REVERSE 8
#define VT_ITALIC 16
#define VT_FAINT 32
/** Enable or disable a text attribute */
void vt_attr(uint8_t attribute, bool on);
/** Disable all text attributes (excluding color) */
void vt_attr_reset();
// SAVE & RESTORE
/** Save cursor position & text attributes */
void vt_save();
/** Restore cursor to saved values */
void vt_restore();
// MODIFY
/** Insert blank lines febore the current line */
void vt_insert_lines(uint8_t count);
/** Delete lines from the current line down */
void vt_delete_lines(uint8_t count);
/** Insert empty characters at cursor */
void vt_insert_chars(uint8_t count);
/** Delete characters at cursor */
void vt_delete_chars(uint8_t count);
// ERASING
/** Clear the screen */
void vt_clear();
/** Erase to the end of line */
void vt_erase_forth();
/** Erase line to cursor */
void vt_erase_back();
/** Erase entire line */
void vt_erase_line();
/** Erase screen below the line */
void vt_erase_above();
/** Erase screen above the line */
void vt_erase_below();
// KEY HANDLER
// Special keys from key handler
#define VK_LEFT 68
#define VK_RIGHT 67
#define VK_UP 65
#define VK_DOWN 66
#define VK_DELETE 51
#define VK_INSERT 50
#define VK_PGUP 53
#define VK_PGDN 54
#define VK_HOME 72
#define VK_END 70
#define VK_F1 80
#define VK_F2 81
#define VK_F3 82
#define VK_F4 83
#define VK_BACKSPACE 8
#define VK_TAB 9
#define VK_ENTER 13
#define VK_ESC 27
void vt_handle_key(uint8_t c);
void vt_set_key_handler(void (*handler)(uint8_t, bool));

@ -0,0 +1,45 @@
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <stdint.h>
#include <stdbool.h>
#include "lib/iopins.h"
#include "lib/uart.h"
#include "lib/stream.h"
#include "lib/onewire.h"
#define T 2
void main()
{
uart_init(9600);
uart_puts_P(PSTR("*** OneWire test ***\r\n"));
while(1)
{
_delay_ms(100);
ow_reset(T);
ow_send(T, SKIP_ROM);
ow_send(T, CONVERT_T);
if(!ow_wait_ready(T)) {
uart_puts_P(PSTR("Wait timeout!\r\n"));
continue;
}
ow_reset(T);
ow_send(T, SKIP_ROM);
int16_t temp = ds1820_read_temp_c(T);
if (temp == TEMP_ERROR) {
uart_puts_P(PSTR("Read error!\r\n"));
} else {
put_i16f(uart, temp, 1);
uart_puts_P(PSTR(" °C\r\n"));
}
}
}

Binary file not shown.
Loading…
Cancel
Save