porklib: Simple library for programming Arduino in C
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
avr-lib/lib/lcd.c

285 lines
4.8 KiB

10 years ago
#include <stdbool.h>
#include <stdint.h>
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <util/delay.h>
#include "calc.h"
#include "pins.h"
#include "nsdelay.h"
#include "lcd.h"
#include "lcd_config.h"
// Start address of rows
const uint8_t LCD_ROW_ADDR[] = {0x00, 0x40, 0x14, 0x54};
// Internal prototypes
void _lcd_mode_r();
void _lcd_mode_w();
void _lcd_clk();
void _lcd_wait_bf();
void _lcd_write_byte(uint8_t bb);
uint8_t _lcd_read_byte();
// Write utilities
#define _lcd_write_low(bb) _lcd_write_nibble((bb) & 0x0F)
#define _lcd_write_high(bb) _lcd_write_nibble(((bb) & 0xF0) >> 4)
#define _lcd_write_nibble(nib) do { \
write_pin(LCD_D7, get_bit((nib), 3)); \
write_pin(LCD_D6, get_bit((nib), 2)); \
write_pin(LCD_D5, get_bit((nib), 1)); \
write_pin(LCD_D4, get_bit((nib), 0)); \
} while(0)
// 0 W, 1 R
bool _lcd_mode;
/** Initialize the display */
void lcd_init()
{
// configure pins as output
as_output(LCD_E);
as_output(LCD_RW);
as_output(LCD_RS);
_lcd_mode = 1; // force data pins to output
_lcd_mode_w();
// Magic sequence to invoke Cthulhu (or enter 4-bit mode)
_delay_ms(16);
_lcd_write_nibble(0b0011);
_lcd_clk();
_delay_ms(5);
_lcd_clk();
_delay_ms(5);
_lcd_clk();
_delay_ms(5);
_lcd_write_nibble(0b0010);
_lcd_clk();
_delay_us(100);
// Configure the display
lcd_write_command(LCD_IFACE_4BIT_2LINE);
lcd_write_command(LCD_DISABLE);
lcd_write_command(LCD_CLEAR);
lcd_write_command(LCD_MODE_INC);
// mark as enabled
lcd_enable();
}
/** Send a pulse on the ENABLE line */
void _lcd_clk()
{
pin_up(LCD_E);
delay_ns(420);
pin_down(LCD_E);
}
/** Enter READ mode */
void _lcd_mode_r()
{
if (_lcd_mode == 1) return; // already in R mode
pin_up(LCD_RW);
as_input_pu(LCD_D7);
as_input_pu(LCD_D6);
as_input_pu(LCD_D5);
as_input_pu(LCD_D4);
_lcd_mode = 1;
}
/** Enter WRITE mode */
void _lcd_mode_w()
{
if (_lcd_mode == 0) return; // already in W mode
pin_down(LCD_RW);
as_output(LCD_D7);
as_output(LCD_D6);
as_output(LCD_D5);
as_output(LCD_D4);
_lcd_mode = 0;
}
/** Read a byte */
uint8_t _lcd_read_byte()
{
_lcd_mode_r();
uint8_t res = 0;
_lcd_clk();
res = (read_pin(LCD_D7) << 7) | (read_pin(LCD_D6) << 6) | (read_pin(LCD_D5) << 5) | (read_pin(LCD_D4) << 4);
_lcd_clk();
res |= (read_pin(LCD_D7) << 3) | (read_pin(LCD_D6) << 2) | (read_pin(LCD_D5) << 1) | (read_pin(LCD_D4) << 0);
return res;
}
/** Write an instruction byte */
void lcd_write_command(uint8_t bb)
{
_lcd_wait_bf();
pin_down(LCD_RS); // select instruction register
_lcd_write_byte(bb); // send instruction byte
}
/** Write a data byte */
void lcd_write_data(uint8_t bb)
{
_lcd_wait_bf();
pin_up(LCD_RS); // select data register
_lcd_write_byte(bb); // send data byte
}
/** Read BF & Address */
uint8_t lcd_read_bf_addr()
{
pin_down(LCD_RS);
return _lcd_read_byte();
}
/** Read CGRAM or DDRAM */
uint8_t lcd_read_ram()
{
pin_up(LCD_RS);
return _lcd_read_byte();
}
/** Write a byte using the 8-bit interface */
void _lcd_write_byte(uint8_t bb)
{
_lcd_mode_w(); // enter W mode
_lcd_write_high(bb);
_lcd_clk();
_lcd_write_low(bb);
_lcd_clk();
}
/** Wait until the device is ready */
void _lcd_wait_bf()
{
uint8_t d = 0;
while(d++ < 120 && lcd_read_bf_addr() & _BV(7))
_delay_us(1);
}
/** Send a string to LCD */
void lcd_puts(char* str_p)
{
while (*str_p)
lcd_putc(*str_p++);
}
/** Sedn a char to LCD */
void lcd_putc(const char c)
{
lcd_write_data(c);
}
/** Set cursor position */
void lcd_xy(const uint8_t x, const uint8_t y)
{
lcd_set_addr(LCD_ROW_ADDR[y] + (x));
}
uint8_t _lcd_old_cursor = CURSOR_NONE;
bool _lcd_enabled = false;
/** Set LCD cursor. If not enabled, only remember it. */
void lcd_cursor(uint8_t type)
{
_lcd_old_cursor = (type & CURSOR_BOTH);
if (_lcd_enabled) lcd_write_command(LCD_CURSOR_NONE | _lcd_old_cursor);
}
/** Display display (preserving cursor) */
void lcd_disable()
{
lcd_write_command(LCD_DISABLE);
_lcd_enabled = false;
}
/** Enable display (restoring cursor) */
void lcd_enable()
{
_lcd_enabled = true;
lcd_cursor(_lcd_old_cursor);
}
/** Go home */
void lcd_home()
{
lcd_write_command(LCD_HOME);
}
/** Clear the screen */
void lcd_clear()
{
lcd_write_command(LCD_CLEAR);
}
/** Define a glyph */
void lcd_define_glyph(const uint8_t index, const uint8_t* array)
{
lcd_set_addr_cgram(index * 8);
for (uint8_t i = 0; i < 8; ++i) {
lcd_write_data(array[i]);
}
}
/** Define a glyph */
void lcd_define_glyph_pgm(const uint8_t index, const uint8_t* array)
{
lcd_set_addr_cgram(index * 8);
for (uint8_t i = 0; i < 8; ++i) {
lcd_write_data(pgm_read_byte(&array[i]));
}
}
/** Set address in CGRAM */
void lcd_set_addr_cgram(const uint8_t acg)
{
lcd_write_command(0b01000000 | ((acg) & 0b00111111));
}
/** Set address in DDRAM */
void lcd_set_addr(const uint8_t add)
{
lcd_write_command(0b10000000 | ((add) & 0b01111111));
}