diff --git a/README.md b/README.md
index 258e273..a25f34c 100644
--- a/README.md
+++ b/README.md
@@ -52,8 +52,11 @@ PROG_TYPE = arduino
PROG_ARGS = -c $(PROG_TYPE) -p $(MCU) -b $(PROG_BAUD) -P $(PROG_DEV)
```
-- Adjust `PROG_DEV` to the device your board is connected to. On Linux it's usually `/dev/ttyUSB0`, but it can also be `/dev/ttyACM0` or something else. On Mac, it'll be `/dev/cu.xxx`. On Windows it's some `COMx`.
- Linux and Mac users can use `ls /dev` to see their devices. Windows users will find this in their Device Manager.
+- Adjust `PROG_DEV` to the device your board is connected to. On Linux it's usually
+ `/dev/ttyUSB0`, but it can also be `/dev/ttyACM0` or something else. On Mac, it'll be
+ `/dev/cu.xxx`. On Windows it's some `COMx`.
+ Linux and Mac users can use `ls /dev` to see their devices. Windows users will find
+ this in their Device Manager.
- You may also adjust the baudrate (`PROG_BAUD`). Some boards need `115200`.
**TIP:** You can look what the Arduino IDE is using - it's running avrdude too.
@@ -63,5 +66,5 @@ PROG_ARGS = -c $(PROG_TYPE) -p $(MCU) -b $(PROG_BAUD) -P $(PROG_DEV)
- If you *add a new C file* to the project, add an entry for it's `.o` (object file,
created by the compiler before linking) to the `OBJS` list in the Makefile.
- Similarly, if you *add a new folder with header files*, add it to `INCL_DIRS`.
-- In case you need `printf` (or `printf` with floats), enable the appropriate LD_FLAGS in the Makefile (it's well
-commented). Code size will - obviously - grow quite a bit.
+- In case you need `printf` (or `printf` with floats), enable the appropriate LD_FLAGS
+ in the Makefile (it's well commented). Code size will - obviously - grow quite a bit.