選択できるのは25トピックまでです。
トピックは、先頭が英数字で、英数字とダッシュ('-')を使用した35文字以内のものにしてください。
Ondřej Hruška
7a2fc08832
|
8年前 | |
|---|---|---|
| lib | 8年前 | |
| .gitignore | 8年前 | |
| LICENSE | 8年前 | |
| Makefile | 8年前 | |
| README.md | 8年前 | |
| main.c | 8年前 | |
| style.astylerc | 8年前 | |
| us_rgb.pro | 8年前 | |
README.md
Spatial RGB
What
- Arduino
- 3 sonars
- 3 colors in the spectrum
- RGB LED strip
- Magic!
Building
To run this project, you need Arduino Pro Mini, or Nano (those $2 eBay clones will work perfectly). You can also try to use a genuine Arduino, even larger (UNO), though I haven't tried that.
To flash the firmware, run make flash. Adjust the Makefile as needed. Naturally, you'll need
avr-gcc and avrdude installed (and Linux or OSX).
Make sure the correct Serial device is defined in the Makefile (/dev/ttyUSB0 or other - it tends
to be something really strange on OSX).
Hardware
-
RGB LED strip with WS2812 or WS2812B. It's set up for a 30-led strip, adjust as needed.
-
Sonars: HC-SR04 (you can get them on eBay)
Wiring is configured in the C file at the top - adjust pin numbers however you like.