electro
/
arduino-spatial-rgb
1
0
Fork 0
Code Issues Pull-Requests Releases Wiki Aktivität
Control RGB with hand-waving above ultrasonic sensors
Du kannst nicht mehr als 25 Themen auswählen Themen müssen entweder mit einem Buchstaben oder einer Ziffer beginnen. Sie können Bindestriche („-“) enthalten und bis zu 35 Zeichen lang sein.
8 Commits
1 Branch
0 Tags
96 KiB
 
 
 
 
Tag: Branch: Struktur: master
Branches Tags
${ item.name }
Tag ${ searchTerm } erstellen
Erstelle Branch ${ searchTerm }
von „master“
${ noResults }
Ondřej Hruška 7a2fc08832
more comments and explanations 		vor 8 Jahren
lib initial vor 8 Jahren
.gitignore initial vor 8 Jahren
LICENSE initial vor 8 Jahren
Makefile initial vor 8 Jahren
README.md readme typos vor 8 Jahren
main.c more comments and explanations vor 8 Jahren
style.astylerc initial vor 8 Jahren
us_rgb.pro initial vor 8 Jahren

README.md

Spatial RGB

What

  • Arduino
  • 3 sonars
  • 3 colors in the spectrum
  • RGB LED strip
  • Magic!

Building

To run this project, you need Arduino Pro Mini, or Nano (those $2 eBay clones will work perfectly). You can also try to use a genuine Arduino, even larger (UNO), though I haven't tried that.

To flash the firmware, run make flash. Adjust the Makefile as needed. Naturally, you'll need avr-gcc and avrdude installed (and Linux or OSX).

Make sure the correct Serial device is defined in the Makefile (/dev/ttyUSB0 or other - it tends to be something really strange on OSX).

Hardware

  • RGB LED strip with WS2812 or WS2812B. It's set up for a 30-led strip, adjust as needed.

  • Sonars: HC-SR04 (you can get them on eBay)

Wiring is configured in the C file at the top - adjust pin numbers however you like.